Nuvoton Technology Corporation

W78E051B40DL - 40MHz 8-Bit 8051 Microcontroller | Nuvoton

MPN: W78E051B40DL ✓ Aktif
5 V Vdss 40-DIP Package 40 MHz Speed 4 KB Flash EPROM (4K x 8 bits) Memory
MOQ: 1 |

W78E051B40DL Ringkasan

Nuvoton Technology Corporation W78E051B40DL is an 8-bit 8051-compatible microcontroller with 4 KB of program memory, 128 bytes of RAM, 32 general-purpose I/O lines, and a 40 MHz maximum clock in a 40-DIP package. It operates from a 5 V supply and is designed for cost-sensitive embedded control applications requiring deterministic 8-bit processing, parallel digital I/O, and compact through-hole assembly.

An 8051-compatible microcontroller is an embedded processing IC that executes a legacy 8051 instruction set while integrating flash program memory, static RAM, timers, serial communication, and parallel I/O. The W78E051B40DL belongs to the broader hierarchy of 8-bit microcontroller, embedded controller, integrated circuit, and semiconductor. Its standard 8051 compatibility simplifies the reuse of established instruction-level code, while flash memory permits in-circuit reprogramming and configuration flexibility.

Key features include 4 KB of Flash EPROM, organized as 4K x 8, and 128 x 8 bits of RAM. Four bidirectional, bit-addressable 8-bit I/O ports provide up to 32 I/O pins. The device supports operation up to 40 MHz, enabling the processor and associated peripherals to service timing-sensitive control, communication, and data-handling tasks. Two software-selectable power-reduction modes help reduce energy use when the application does not require continuous processor activity.

The W78E51B architecture is fully compatible with the standard 8051 instruction set. Idle mode stops the processor clock while allowing peripheral operation to continue, and power-down mode stops the crystal oscillator for minimum power consumption. The external clock can be stopped without affecting processor state, which can simplify sequencing and clock-control strategies in simple embedded systems.

Typical applications include appliance controllers, small industrial control panels, keypad interfaces, LED indication systems, simple motor or relay controllers, and compact 8051-based instruments. Its parallel I/O is useful for discrete input sensing and output control, while its 5 V operation and 40-DIP package are well suited to through-hole educational, prototype, and legacy-control boards.

When designing around the W78E051B40DL, preserve the oscillator and reset circuitry required by the selected clock architecture, and keep high-current loads away from port pins because the I/O current limits must be respected. Confirm the complete 40-pin signal map against the manufacturer datasheet before assigning board functions. Use idle mode when peripherals must continue operating but the core can pause, and use power-down mode when the lowest active-state consumption is more important than immediate restart speed.

This product page combines the manufacturer-family characteristics, verified package and memory specifications, pinout-design guidance, application fit, and transparent comparison guidance. It is intended to help engineers determine whether the W78E051B40DL matches the required memory size, clock rate, package, power mode, and legacy 8051 software environment before beginning a PCB or firmware design.

Pilihan pengganti yang segera untuk W78E051B40DL — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera W78E051B40DL (sama faktor bentuk dan kaki).

Nuvoton Technology Corporation
Bandingkan Dengan W78E051B40DL →

W78E051C40DL

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
Nuvoton Technology Corporation
📦 40-pin DIP
8-bit 8051-compatible flash microcontroller · W78 8051 · 8 bit · 40 MHz · 4 KB (4K x 8) · Flash · 128 x 8 bits · 32

Hubungi untuk harga

Lihat Datasheet →

W78E051D40DL

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 40-pin DIP
Uses the same 40-pin DIP format and 4KB flash organization, with a lower clock rating of 24MHz versus 40MHz, a 40% reduction.

📋 Alternatif rujukan (tidak dalam katalog)

W78E051DDL

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 40-pin DIP
Retains the 40-pin DIP package and 4KB flash organization but is a lower-clock family configuration, resulting in a 40% clock reduction from 40MHz to 24MHz.

📋 Alternatif rujukan (tidak dalam katalog)

W78E051A40DL

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 40-pin DIP
Uses the same 40-pin DIP format and 4KB flash organization but has a 24MHz clock rating rather than 40MHz, a 40% reduction.

📋 Alternatif rujukan (tidak dalam katalog)

W78E051B40DL Penilaian maksimum & Ciri-ciri Elektrik

Controller Type 8-bit 8051-compatible microcontroller
Program Memory 4 KB Flash EPROM (4K x 8 bits)
RAM 128 bytes (128 x 8 bits)
Frekuensi Klock Maksimum 40 MHz
I/O Port Count 4 ports
I/O Width per Port 8 bits
Total I/O Pins 32 pins
I/O Features Bidirectional and bit-addressable
Tegangan Pemberi Arus 5 V
Kemasan 40-DIP
Gaya Pemasangan Through-hole
Instruction Set Fully compatible with the standard 8051 instruction set
Power Reduction Modes 2 modes: idle and power-down
Idle Mode Behavior Processor clock off; peripheral operation continues
Power-Down Behavior Crystal oscillator stopped
External Clock Control External clock can be stopped without affecting processor state

Panduan Konfigurasi Pin W78E051B40DL 40-dip

Konfigurasi pin untuk W78E051B40DL (40-dip pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 40-dip untuk W78E051B40DL

Tiada data garisan pin yang diperoleh untuk W78E051B40DL.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

W78E051B40DL patut untuk 6 aplikasis: Appliance Control Panel, Keypad and LED User Interface, Small Industrial Relay Controller, LED Status and Sequencing Panel, 8051-Based Educational Controller, Legacy 5 V Embedded Instrument.

🏭

Appliance Control Panel

The W78E051B40DL fits a 5 V appliance control panel where a keypad, status LEDs, relays, and discrete sensors must be coordinated by a compact embedded controller. Its four bidirectional 8-bit ports provide 32 I/O lines, while the 4 KB Flash EPROM and 128-byte RAM support compact firmware for debouncing, state-machine logic, and output scheduling. The 40 MHz clock allows useful processing headroom for scanning and control tasks. A practical design can use idle mode during inactivity while peripheral operation continues, reducing activity without interrupting time-based functions. The 40-DIP through-hole package also simplifies repair and prototype assembly where surface-mount packages would be inconvenient.

🔧

Keypad and LED User Interface

For keypad scanning and LED indication, the W78E051B40DL can read multiple discrete inputs and drive outputs through its four 8-bit ports. Bit-addressable I/O is useful when individual keys or indicators require separate control without repeatedly changing an entire port. Its 8051-compatible instruction set supports established scanning routines, and the 40 MHz clock provides ample timing margin for debouncing and periodic display updates. The controller's 128-byte RAM is sufficient for compact state buffers but not for large display-frame storage, so the design should keep transient data small. Power-down mode can be used when the complete user interface must stop between operating cycles.

⚡

Small Industrial Relay Controller

The W78E051B40DL is appropriate for a small relay-control module that accepts limit switches or field inputs and operates relays or contactors through logic-level driver stages. The 32 available I/O lines allow field inputs, status feedback, and output commands to be organized without an external I/O expander. Its 5 V supply and 40-DIP package fit legacy 5 V control boards, while idle mode can pause core execution between events. Because the controller directly drives no high-current load, relay coils should use suitable drivers, flyback protection, and separation from sensitive reset and oscillator circuitry. The exact 40-DIP pin map must be checked before assigning functions.

💡

LED Status and Sequencing Panel

An LED status panel can use the W78E051B40DL to implement timing, sequencing, and fault indication without a larger control platform. The four 8-bit ports provide enough parallel outputs for grouped LEDs and discrete status flags, and the 40 MHz clock supports precise software timing even when several indications update concurrently. The 4 KB program-memory region is appropriate for compact sequencing tables and state-machine code, although display patterns should be stored efficiently. Current limiting must be implemented for every LED path, and port-drive limits should be respected. Power-down mode offers lower consumption when the panel is intentionally inactive, while idle mode is preferable if periodic timing must remain active.

🧩

8051-Based Educational Controller

The W78E051B40DL supports educational and prototype development because it combines a standard-compatible 8051 instruction set with a conventional 40-DIP through-hole package. Students can connect switches, LEDs, a keypad, or simple sensors directly to the four 8-bit ports while learning assembly, interrupt handling, timers, and serial communication. A 40 MHz operating ceiling gives modern lab hardware ample speed for demonstration programs, while 4 KB of Flash EPROM keeps classroom projects appropriately constrained. The device is particularly useful when maintaining familiar 8051 source code matters more than advanced integrated peripherals or ultra-low-power operation.

📟

Legacy 5 V Embedded Instrument

The W78E051B40DL can serve as the control core of a legacy 5 V embedded instrument that combines switch inputs, status outputs, and a simple user interface. Its 8051 compatibility allows controlled migration from an existing firmware architecture, and the 40-DIP package makes replacement straightforward on older through-hole instruments. The controller's 4 KB program memory and 128 bytes of RAM suit compact supervisory logic rather than signal-heavy computation. Idle mode is useful during long measurement intervals, whereas power-down mode should be selected only when oscillator restart requirements are acceptable. Final product qualification should include temperature, isolation, EMC, and functional-safety checks outside the MCU itself.

What are the key specifications of W78E051B40DL that engineers should know?
The W78E051B40DL is an 8-bit, 8051-compatible microcontroller rated for operation up to 40 MHz, with 4 KB of Flash EPROM, 128 bytes of RAM, 32 I/O lines, and a 40-DIP package. According to the manufacturer-family datasheet, it includes four bidirectional, bit-addressable 8-bit ports and two software-selectable power-reduction modes. These characteristics make it primarily suitable for compact, 5 V embedded-control and legacy-compatible through-hole designs.
What is the operating voltage of W78E051B40DL?
The W78E051B40DL operates at 5 V. According to the manufacturer-family product documentation, the device is intended for a single 5 V supply environment and is packaged in a 40-DIP through-hole format. Designers should use power rails and decoupling that remain within the detailed electrical limits stated in the datasheet when assigning the controller to a specific board.
What is the program memory size of W78E051B40DL?
The W78E051B40DL provides 4 KB of Flash EPROM organized as 4K x 8 bits. According to the manufacturer-family datasheet, this flash-based program memory supports in-system configuration of the controller's firmware. The 4 KB limit should be checked against compiled-code size, bootloader requirements, interrupt vectors, constants, and any application data stored directly in program memory.
How much RAM and I/O does W78E051B40DL provide?
The W78E051B40DL contains 128 bytes of RAM and provides 32 I/O lines through four 8-bit ports. According to the manufacturer-family datasheet, those ports are bidirectional and bit-addressable, allowing individual pins to be examined or controlled independently. The limited RAM favors compact buffering and register-oriented firmware, while the port count supports direct sensing and discrete output interfaces.
Is W78E051B40DL compatible with standard 8051 software?
Yes. The W78E051B40DL uses an instruction set fully compatible with the standard 8051, as stated in the manufacturer-family datasheet. This compatibility allows many established 8051 routines and assembly-level patterns to be reused. Peripheral registers, interrupt behavior, memory organization, and timing assumptions must still be checked against the device documentation before treating an existing design as a direct firmware match.
What power-saving modes are available on W78E051B40DL?
The W78E051B40DL has two software-selectable power-reduction modes: idle mode and power-down mode. According to the manufacturer-family datasheet, idle mode turns off the processor clock while permitting continued peripheral operation, whereas power-down mode stops the crystal oscillator for minimum power consumption. The appropriate mode depends on whether peripherals must remain active and how quickly the system must resume.
Where can I download the W78E051B40DL datasheet PDF?
The W78E051B40DL datasheet PDF is accessible through the product-documentation links on this page, including the manufacturer-family PDF hosted with the verified product records. The document identifies the W78E051B as an 8-bit microcontroller with 4 KB of Flash EPROM, 128 bytes of RAM, four 8-bit ports, and idle and power-down modes. Use the pin-description section for the complete 40-DIP assignment.
Where can I find the W78E051B40DL pinout?
The W78E051B40DL pinout is defined in the manufacturer-family datasheet, which documents the 40-DIP device and its four 8-bit I/O ports. The package has 40 through-hole positions, but the complete signal-to-pin map must be assigned from the datasheet pin-description table rather than inferred solely from the I/O count. This prevents accidental duplication of oscillator, reset, supply, or port functions.
Is W78E051B40DL suitable for industrial control and appliance controllers?
The W78E051B40DL is suitable for many appliance, keypad, LED, relay, and compact industrial-control designs that use a 5 V supply and 8051-compatible firmware. Its four 8-bit ports provide 32 bidirectional lines, while the 40 MHz clock and two power-reduction modes support responsive control and lower-duty-cycle operation. Temperature qualification and EMC requirements should be verified separately for the finished equipment.
What is the best drop-in replacement for W78E051B40DL?
A valid drop-in replacement must match the 40-DIP footprint, 5 V supply, 8051-compatible instruction set, 4 KB program memory, 128-byte RAM, 32 I/O lines, clock arrangement, and relevant peripheral mapping. No separately verified replacement MPN was established for the exact W78E051B40DL ordering code. Treat any proposed substitute as unconfirmed until its complete pin and electrical tables have been compared.
Can another 40-DIP microcontroller replace W78E051B40DL without PCB changes?
Only a device with an identical 40-DIP pin assignment can replace the W78E051B40DL without PCB changes. Matching package type and clock rating alone is insufficient because supply pins, oscillator connections, reset behavior, port multiplexing, and interrupt inputs must align. The 40-DIP outline and 40 MHz maximum clock are useful initial filters, but the complete manufacturer pin table remains the deciding compatibility criterion.
When should I choose W78E051B40DL instead of a modern 8-bit MCU?
Choose the W78E051B40DL when an existing 8051 code base, 5 V through-hole layout, 4 KB program-memory ceiling, and 128-byte RAM are acceptable requirements. It offers a straightforward path for maintaining established 8051 software and using a 40-DIP footprint. Choose a newer microcontroller when greater memory, faster peripherals, lower power, smaller packaging, or more integrated analog functions are needed.
Is W78E051B40DL the same as the W78E051B family device?
The W78E051B40DL is an orderable member of the W78E051B family, with the suffix identifying its specific device and 40-DIP package configuration. The manufacturer-family datasheet describes the shared W78E051B architecture, including its 8051 compatibility, 4 KB Flash EPROM, 128-byte RAM, and four 8-bit ports. Do not assume that every family member has the same package, temperature grade, or suffix-specific options.
Where can I buy W78E051B40DL online?
Use the Request a Quote form on this page to ask for W78E051B40DL availability, current commercial terms, and an appropriate order quantity. The Request a Quote workflow provides a direct route for current sourcing without embedding a price that may quickly become stale. Confirm the exact W78E051B40DL suffix, 40-DIP package, delivery condition, and target quantity before authorizing an order.
What is the price of W78E051B40DL?
Current pricing for the W78E051B40DL should be requested through the Request a Quote form on this page. Commercial terms can vary with order quantity, sourcing channel, and device condition, so a static price figure would not represent the current purchasing position accurately. Include your required quantity and target packaging needs so the quotation can reflect the intended production buy.
What is the lead time and stock status for W78E051B40DL?
Current lead time and stock status for W78E051B40DL should be confirmed through the Request a Quote form on this page. Request the production quantity, shipment destination, and required delivery date to obtain a practical schedule. For scheduled production, ask for availability information covering the exact 40-DIP ordering code rather than relying on a generic family-level stock statement.

Data referensi kejuruteraan untuk W78E051B40DL — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the W78E051B40DL when a new or maintained design requires a 5 V, through-hole 8-bit controller with a standard 8051 instruction set, up to 40 MHz operation, 4 KB of program memory, 128 bytes of RAM, and 32 parallel I/O lines. It is especially practical for appliance panels, simple relay controllers, LED sequencing, educational boards, and legacy instruments where changing the processor architecture would create unnecessary firmware work. Choose a newer 8-bit MCU when more memory, integrated USB, hardware multiplication, larger RAM, finer low-power controls, or a smaller package are required. A purported drop-in substitute should be accepted only after its 40-pin assignment, oscillator arrangement, reset behavior, electrical limits, memory map, peripheral registers, and software compatibility have been compared with the manufacturer documentation.

Perbandingan dengan Gantian

Parametr Produk Ini
Brand Nuvoton Technology Corporation
Package 40-DIP
Controller Type 8-bit 8051-compatible microcontroller
Program Memory 4 KB Flash EPROM (4K x 8 bits)
RAM 128 bytes (128 x 8 bits)
Maximum Clock Frequency 40 MHz
Supply Voltage 5 V
I/O Configuration 4 bidirectional, bit-addressable 8-bit ports; 32 I/O lines
Power Reduction Modes Idle mode and power-down mode

Penyeberangsung Jelas

  • Maintains a standard 8051 software baseline (vsA modern non-8051 8-bit microcontroller)
  • Provides 32 parallel I/O lines in a conventional package (vsA smaller surface-mount microcontroller)
  • Supports two distinct low-power operating modes (vsA basic 8051 design without controlled idle or power-down behavior)

Catatan Desain

Reserve the oscillator, reset, supply, and decoupling connections exactly as shown in the manufacturer-family schematic and pin description. Place the decoupling capacitor close to the supply and ground pins, keep the oscillator loop compact, and route it away from relay-coil drivers or other switching nodes. The 40-DIP footprint makes hand assembly straightforward, but the long package leads also increase susceptibility to noise injection, so maintain a compact ground return and avoid using unused port pins as long signal routes.

Use idle mode when the processor can stop while timers, serial functions, or other peripherals must continue. According to the manufacturer-family description, idle mode disables the processor clock but leaves peripheral operation available. Use power-down mode only when stopping the crystal oscillator is acceptable; verify startup timing and oscillator settling before the design relies on immediate resumption. The controller's 5 V rail should be sized for the processor and I/O loads while allowing margin for transitions on external signals.

Do not treat 32 I/O lines as 32 simultaneously usable outputs without checking current limits, port-drive capability, and each pin's alternate function. The four ports are bidirectional, so external signals can drive a pin while firmware has configured it as output. Assign functions from the complete 40-pin datasheet table and preserve the power, ground, reset, oscillator, and programming-access pins. Firmware should also initialize each port before enabling external circuitry to prevent startup glitches.

Keep sensitive timing and communication paths away from relay coils, contactors, mains-connected wiring, and high-current switching stages. For a through-hole prototype, short point-to-point jumpers are preferable to long perimeter routing. Confirm the complete signal map before assigning connectors, and place pull resistors or driver interfaces where they cannot inject excessive current into an I/O pin. If the board includes an external crystal, keep the oscillator area quiet and provide the load capacitance required by the selected oscillator network.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

No product-specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was established for the exact W78E051B40DL ordering code. The -Q1 AEC-Q100 qualification notation used by many automotive devices is not present in this MPN.

Data disahkan pada: 2026-11-11 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

W78E051B40DL datasheet W78E051B40DL datasheet pdf W78E051B40DL pinout W78E051B40DL specifications W78E051B40DL equivalent W78E051B40DL replacement W78E051B40DL cross reference W78E051B40DL 40-DIP footprint W78E051B40DL price W78E051B40DL stock Nuvoton W78E051B40DL W78E051B40DL application circuit

Komponen dan Tanda berkaitan

Nuvoton Technology Corporation Winbond Electronics Corporation W78E051B40DL W78E051B 8-bit microcontroller 8051-compatible microcontroller embedded controller integrated circuit semiconductor Flash EPROM program memory static RAM four 8-bit I/O ports 32 I/O lines 40 MHz clock 5 V supply 40-DIP package through-hole package idle mode power-down mode crystal oscillator bit-addressable I/O legacy firmware industrial control appliance control
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ