W78E051B40DL - 40MHz 8-Bit 8051 Microcontroller | Nuvoton
料号: W78E051B40DL ✓ 量产中W78E051B40DL 概述
An 8051-compatible microcontroller is an embedded processing IC that executes a legacy 8051 instruction set while integrating flash program memory, static RAM, timers, serial communication, and parallel I/O. The W78E051B40DL belongs to the broader hierarchy of 8-bit microcontroller, embedded controller, integrated circuit, and semiconductor. Its standard 8051 compatibility simplifies the reuse of established instruction-level code, while flash memory permits in-circuit reprogramming and configuration flexibility.
Key features include 4 KB of Flash EPROM, organized as 4K x 8, and 128 x 8 bits of RAM. Four bidirectional, bit-addressable 8-bit I/O ports provide up to 32 I/O pins. The device supports operation up to 40 MHz, enabling the processor and associated peripherals to service timing-sensitive control, communication, and data-handling tasks. Two software-selectable power-reduction modes help reduce energy use when the application does not require continuous processor activity.
The W78E51B architecture is fully compatible with the standard 8051 instruction set. Idle mode stops the processor clock while allowing peripheral operation to continue, and power-down mode stops the crystal oscillator for minimum power consumption. The external clock can be stopped without affecting processor state, which can simplify sequencing and clock-control strategies in simple embedded systems.
Typical applications include appliance controllers, small industrial control panels, keypad interfaces, LED indication systems, simple motor or relay controllers, and compact 8051-based instruments. Its parallel I/O is useful for discrete input sensing and output control, while its 5 V operation and 40-DIP package are well suited to through-hole educational, prototype, and legacy-control boards.
When designing around the W78E051B40DL, preserve the oscillator and reset circuitry required by the selected clock architecture, and keep high-current loads away from port pins because the I/O current limits must be respected. Confirm the complete 40-pin signal map against the manufacturer datasheet before assigning board functions. Use idle mode when peripherals must continue operating but the core can pause, and use power-down mode when the lowest active-state consumption is more important than immediate restart speed.
This product page combines the manufacturer-family characteristics, verified package and memory specifications, pinout-design guidance, application fit, and transparent comparison guidance. It is intended to help engineers determine whether the W78E051B40DL matches the required memory size, clock rate, package, power mode, and legacy 8051 software environment before beginning a PCB or firmware design.
直接替换替代料: W78E051B40DL ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: W78E051B40DL (相同外形与封装尺寸).
W78E051C40DL
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →W78E051D40DL
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
W78E051DDL
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
W78E051A40DL
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
W78E051B40DL 最大额定值与电气特性
| Controller Type | 8-bit 8051-compatible microcontroller |
| Program Memory | 4 KB Flash EPROM (4K x 8 bits) |
| RAM | 128 bytes (128 x 8 bits) |
| 最大时钟频率 | 40 MHz |
| I/O Port Count | 4 ports |
| I/O Width per Port | 8 bits |
| Total I/O Pins | 32 pins |
| I/O Features | Bidirectional and bit-addressable |
| 电源电压 | 5 V |
| 封装 | 40-DIP |
| 安装方式 | Through-hole |
| Instruction Set | Fully compatible with the standard 8051 instruction set |
| Power Reduction Modes | 2 modes: idle and power-down |
| Idle Mode Behavior | Processor clock off; peripheral operation continues |
| Power-Down Behavior | Crystal oscillator stopped |
| External Clock Control | External clock can be stopped without affecting processor state |
W78E051B40DL 40-dip 引脚配置指南
W78E051B40DL(40-dip 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: W78E051B40DL.
请参阅 数据手册 以查看完整引脚配置。
典型应用
W78E051B40DL 适用于 6 应用s: Appliance Control Panel, Keypad and LED User Interface, Small Industrial Relay Controller, LED Status and Sequencing Panel, 8051-Based Educational Controller, Legacy 5 V Embedded Instrument.
Appliance Control Panel
The W78E051B40DL fits a 5 V appliance control panel where a keypad, status LEDs, relays, and discrete sensors must be coordinated by a compact embedded controller. Its four bidirectional 8-bit ports provide 32 I/O lines, while the 4 KB Flash EPROM and 128-byte RAM support compact firmware for debouncing, state-machine logic, and output scheduling. The 40 MHz clock allows useful processing headroom for scanning and control tasks. A practical design can use idle mode during inactivity while peripheral operation continues, reducing activity without interrupting time-based functions. The 40-DIP through-hole package also simplifies repair and prototype assembly where surface-mount packages would be inconvenient.
Keypad and LED User Interface
For keypad scanning and LED indication, the W78E051B40DL can read multiple discrete inputs and drive outputs through its four 8-bit ports. Bit-addressable I/O is useful when individual keys or indicators require separate control without repeatedly changing an entire port. Its 8051-compatible instruction set supports established scanning routines, and the 40 MHz clock provides ample timing margin for debouncing and periodic display updates. The controller's 128-byte RAM is sufficient for compact state buffers but not for large display-frame storage, so the design should keep transient data small. Power-down mode can be used when the complete user interface must stop between operating cycles.
Small Industrial Relay Controller
The W78E051B40DL is appropriate for a small relay-control module that accepts limit switches or field inputs and operates relays or contactors through logic-level driver stages. The 32 available I/O lines allow field inputs, status feedback, and output commands to be organized without an external I/O expander. Its 5 V supply and 40-DIP package fit legacy 5 V control boards, while idle mode can pause core execution between events. Because the controller directly drives no high-current load, relay coils should use suitable drivers, flyback protection, and separation from sensitive reset and oscillator circuitry. The exact 40-DIP pin map must be checked before assigning functions.
LED Status and Sequencing Panel
An LED status panel can use the W78E051B40DL to implement timing, sequencing, and fault indication without a larger control platform. The four 8-bit ports provide enough parallel outputs for grouped LEDs and discrete status flags, and the 40 MHz clock supports precise software timing even when several indications update concurrently. The 4 KB program-memory region is appropriate for compact sequencing tables and state-machine code, although display patterns should be stored efficiently. Current limiting must be implemented for every LED path, and port-drive limits should be respected. Power-down mode offers lower consumption when the panel is intentionally inactive, while idle mode is preferable if periodic timing must remain active.
8051-Based Educational Controller
The W78E051B40DL supports educational and prototype development because it combines a standard-compatible 8051 instruction set with a conventional 40-DIP through-hole package. Students can connect switches, LEDs, a keypad, or simple sensors directly to the four 8-bit ports while learning assembly, interrupt handling, timers, and serial communication. A 40 MHz operating ceiling gives modern lab hardware ample speed for demonstration programs, while 4 KB of Flash EPROM keeps classroom projects appropriately constrained. The device is particularly useful when maintaining familiar 8051 source code matters more than advanced integrated peripherals or ultra-low-power operation.
Legacy 5 V Embedded Instrument
The W78E051B40DL can serve as the control core of a legacy 5 V embedded instrument that combines switch inputs, status outputs, and a simple user interface. Its 8051 compatibility allows controlled migration from an existing firmware architecture, and the 40-DIP package makes replacement straightforward on older through-hole instruments. The controller's 4 KB program memory and 128 bytes of RAM suit compact supervisory logic rather than signal-heavy computation. Idle mode is useful during long measurement intervals, whereas power-down mode should be selected only when oscillator restart requirements are acceptable. Final product qualification should include temperature, isolation, EMC, and functional-safety checks outside the MCU itself.
工程参考数据: W78E051B40DL ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Brand | Nuvoton Technology Corporation |
| Package | 40-DIP |
| Controller Type | 8-bit 8051-compatible microcontroller |
| Program Memory | 4 KB Flash EPROM (4K x 8 bits) |
| RAM | 128 bytes (128 x 8 bits) |
| Maximum Clock Frequency | 40 MHz |
| Supply Voltage | 5 V |
| I/O Configuration | 4 bidirectional, bit-addressable 8-bit ports; 32 I/O lines |
| Power Reduction Modes | Idle mode and power-down mode |
关键差异点
- Maintains a standard 8051 software baseline (对比 A modern non-8051 8-bit microcontroller)
- Provides 32 parallel I/O lines in a conventional package (对比 A smaller surface-mount microcontroller)
- Supports two distinct low-power operating modes (对比 A basic 8051 design without controlled idle or power-down behavior)
设计说明
Reserve the oscillator, reset, supply, and decoupling connections exactly as shown in the manufacturer-family schematic and pin description. Place the decoupling capacitor close to the supply and ground pins, keep the oscillator loop compact, and route it away from relay-coil drivers or other switching nodes. The 40-DIP footprint makes hand assembly straightforward, but the long package leads also increase susceptibility to noise injection, so maintain a compact ground return and avoid using unused port pins as long signal routes.
Use idle mode when the processor can stop while timers, serial functions, or other peripherals must continue. According to the manufacturer-family description, idle mode disables the processor clock but leaves peripheral operation available. Use power-down mode only when stopping the crystal oscillator is acceptable; verify startup timing and oscillator settling before the design relies on immediate resumption. The controller's 5 V rail should be sized for the processor and I/O loads while allowing margin for transitions on external signals.
Do not treat 32 I/O lines as 32 simultaneously usable outputs without checking current limits, port-drive capability, and each pin's alternate function. The four ports are bidirectional, so external signals can drive a pin while firmware has configured it as output. Assign functions from the complete 40-pin datasheet table and preserve the power, ground, reset, oscillator, and programming-access pins. Firmware should also initialize each port before enabling external circuitry to prevent startup glitches.
Keep sensitive timing and communication paths away from relay coils, contactors, mains-connected wiring, and high-current switching stages. For a through-hole prototype, short point-to-point jumpers are preferable to long perimeter routing. Confirm the complete signal map before assigning connectors, and place pull resistors or driver interfaces where they cannot inject excessive current into an I/O pin. If the board includes an external crystal, keep the oscillator area quiet and provide the load capacitance required by the selected oscillator network.
合规信息
No product-specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was established for the exact W78E051B40DL ordering code. The -Q1 AEC-Q100 qualification notation used by many automotive devices is not present in this MPN.