NI

WM8750LSEFL - Stereo Audio Codec with Speaker | Wolfson

MPN: WM8750LSEFL ✗ Akhir Hayat
3.3 V Vdss
MOQ: 1 |

WM8750LSEFL Ringkasan

The Wolfson Microelectronics WM8750LSEFL is a stereo audio codec with headphone and speaker outputs, designed for portable audio applications. It combines a 98 dB A-weighted DAC signal-to-noise ratio, a 95 dB A-weighted ADC signal-to-noise ratio, a mono 400 mW BTL speaker driver, and a headphone output capable of delivering more than 40 mW into 16 ohms from a 3.3 V supply.

An audio codec is an integrated circuit that converts between digital audio data and analog microphone, headphone, and speaker signals. In the signal-chain hierarchy, the WM8750LSEFL is an audio codec, a mixed-signal interface IC, and a power-management-assisted audio output device. Its integrated converter, microphone interface, headphone amplifier, and speaker driver reduce the number of external components required in portable playback, recording, and communication equipment.

The device supports a complete stereo or mono microphone interface with programmable automatic level control and a noise gate. The 98 dB A-weighted DAC SNR and -95 dB total harmonic distortion at 48 kHz and 3.3 V support low-noise digital-to-analog playback. Its 95 dB A-weighted ADC SNR and -90 dB total harmonic distortion at the same operating condition provide symmetrical recording performance when low distortion is important.

Output integration provides practical advantages for portable systems. The mono bridge-tied-load speaker driver can deliver 400 mW without requiring a separate power amplifier, while the integrated headphone driver can supply more than 40 mW into a 16-ohm load at 3.3 V. These functions are controlled through the codec interface, allowing software-managed audio routing and gain configuration.

Typical uses include portable media players, personal audio devices, smart-home audio endpoints, headset electronics, compact recording products, and battery-powered communication equipment. Its integrated speaker and headphone paths are especially useful where PCB area, component count, and power-management complexity must be controlled without sacrificing essential playback functions.

When laying out a circuit, use the manufacturer pin-description table and application schematic to assign analog, digital, and power connections. Keep microphone inputs and headphone outputs away from high-speed digital traces, provide the recommended decoupling capacitors at their supply pins, and verify speaker impedance and thermal conditions against the datasheet limits.

This product record combines the WM8750LSEFL feature information with practical guidance on audio performance, layout, thermal considerations, component pairing, and replacement selection. It is structured to help engineers identify the correct codec, compare its integrated functions, and plan a robust portable-audio implementation before layout release.

Pilihan pengganti yang segera untuk WM8750LSEFL — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Tiada pilihan pengganti yang segera untuk produk ini.

Minta Alternatif

WM8750LSEFL Spesifikasi

DAC Signal-to-Noise Ratio 98 dB A-weighted
DAC Total Harmonic Distortion -95 dB at 48 kHz and 3.3 V
ADC Signal-to-Noise Ratio 95 dB A-weighted
ADC Total Harmonic Distortion -90 dB at 48 kHz and 3.3 V
Speaker Output Power 400 mW
Speaker Output Topology Mono BTL
Headphone Output Power Greater than 40 mW into 16 ohms at 3.3 V
Microphone Interface Complete stereo or mono interface
Automatic Level Control Programmable
Noise Gate Programmable
Audio Converter Type Stereo ADC and stereo DAC
Typical Operating Supply 3.3 V
kadar sampling 48 kHz reference condition

Panduan Konfigurasi Pin WM8750LSEFL standard

Konfigurasi pin untuk WM8750LSEFL (standard pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai standard untuk WM8750LSEFL

Tiada data garisan pin yang diperoleh untuk WM8750LSEFL.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

WM8750LSEFL patut untuk 6 aplikasis: Portable Media Player, Headset and Headphone Electronics, Smart-Home Audio Endpoint, Portable Recording Product, Battery-Powered Communication Device, Compact Audio Interface.

📱

Portable Media Player

The WM8750LSEFL fits portable media players that combine digital playback, microphone recording, headphone output, and a small internal speaker. According to the Wolfson Microelectronics datasheet, the codec delivers a 98 dB A-weighted DAC SNR and -95 dB DAC distortion at 48 kHz and 3.3 V, providing a low-noise playback path without a separate output codec. Its integrated headphone driver can deliver more than 40 mW into 16 ohms, while the 400 mW mono BTL stage can drive a compact speaker. The tradeoff is that the integrated output path is optimized for portable, moderate-power loads rather than high-impedance studio headphones or multi-speaker systems.

🎧

Headset and Headphone Electronics

The WM8750LSEFL is suitable for headset electronics requiring digital voice capture and low-power headphone playback in one device. Its stereo or mono microphone interface, programmable automatic level control, and programmable noise gate support portable speech capture, while the headphone stage provides more than 40 mW into a 16-ohm load at 3.3 V. The ADC provides 95 dB A-weighted SNR and -90 dB distortion at 48 kHz and 3.3 V. This integration reduces the number of analog output blocks in compact products, although engineers must still check microphone biasing, headset impedance, plug detection, and acoustic limits against the manufacturer application circuit.

🧩

Smart-Home Audio Endpoint

The WM8750LSEFL can support a compact smart-home audio endpoint that plays local notifications or streamed sound while accepting voice input. Its integrated 400 mW mono BTL speaker driver suits a small enclosure-mounted transducer, and the programmable microphone path can use automatic level control and noise gating for speech capture. Converter performance includes 98 dB A-weighted DAC SNR and 95 dB A-weighted ADC SNR at the documented operating conditions. A design should provide clean 3.3 V power, separate analog and digital grounding where appropriate, and protection appropriate to the speaker wiring and physical installation.

🎙️

Portable Recording Product

The WM8750LSEFL fits portable stereo-recording products that need integrated microphone conditioning, high-resolution conversion, monitoring, and speaker playback. The stereo or mono microphone interface includes programmable automatic level control and a programmable noise gate, while the ADC delivers 95 dB A-weighted SNR and -90 dB total harmonic distortion at 48 kHz and 3.3 V. The same device can provide headphone monitoring above 40 mW into 16 ohms and a 400 mW mono BTL speaker path for playback. Input selection, gain range, sampling rate, clocking, and record-path filtering must be configured from the datasheet and register description before production testing.

📡

Battery-Powered Communication Device

The WM8750LSEFL is appropriate for battery-powered communication equipment requiring voice capture, local monitoring, and a compact speaker. Its 3.3 V operating condition and integrated headphone and BTL speaker stages reduce the board area associated with separate output amplifiers. The microphone interface supports programmable automatic level control and noise gating, which can help maintain usable signal levels in changing acoustic conditions. The 400 mW BTL specification describes the maximum documented speaker output condition, so battery current, speaker impedance, and enclosure temperature should be evaluated before operation at the upper output limit.

🔧

Compact Audio Interface

The WM8750LSEFL can serve as the central converter in a compact audio interface when both analog recording and playback are required. The stereo ADC and DAC provide 95 dB and 98 dB A-weighted SNR, respectively, at the documented 48 kHz and 3.3 V reference conditions. Programmable microphone-level and noise-gate functions support input conditioning, while integrated headphone and speaker outputs reduce external amplifier count. Designers should treat these headline figures as component-level performance: full-scale input selection, clock configuration, analog layout, grounding, and the external microphone and output networks determine the finished interface performance.

What is the WM8750LSEFL?
The WM8750LSEFL is a Wolfson Microelectronics stereo audio codec for portable audio applications. According to the Wolfson Microelectronics datasheet, it integrates a stereo ADC and DAC, stereo or mono microphone inputs, programmable automatic level control and noise gating, a mono 400 mW BTL speaker driver, and a headphone driver producing more than 40 mW into 16 ohms from a 3.3 V supply.
What are the key specifications of WM8750LSEFL that engineers should know?
The WM8750LSEFL combines 98 dB A-weighted DAC SNR, 95 dB A-weighted ADC SNR, and integrated analog output stages. According to the Wolfson Microelectronics datasheet, DAC distortion is -95 dB and ADC distortion is -90 dB at 48 kHz and 3.3 V. The device also includes a 400 mW mono BTL speaker driver and a headphone output rated above 40 mW into a 16-ohm load at 3.3 V.
Where can I download the WM8750LSEFL datasheet PDF?
The WM8750LSEFL datasheet PDF is available from the Wolfson Microelectronics document mirror linked on this page. The manufacturer datasheet is titled for the stereo codec for portable audio applications and contains the authoritative pin descriptions, electrical characteristics, register map, application circuits, and recommended operating conditions. Use the pin-description table before assigning PCB nets or configuring the speaker and headphone outputs.
Where can I find the WM8750LSEFL pinout?
The WM8750LSEFL pinout must be taken from the pin-description table in the Wolfson Microelectronics datasheet because no individual pin table is reproduced on this page. That table identifies the digital audio connections, control signals, analog inputs and outputs, supply pins, ground pins, and exposed or reserved terminals for the exact package. Always follow its package drawing and terminal numbering during PCB layout.
What is the output power of the WM8750LSEFL speaker driver?
The WM8750LSEFL contains an on-chip 400 mW mono bridge-tied-load speaker driver. According to the Wolfson Microelectronics datasheet, the device also integrates a separate headphone driver capable of more than 40 mW into a 16-ohm load at 3.3 V. These outputs should not be treated as interchangeable: the speaker path is BTL and mono, while the headphone path is designed for a conventional headphone load.
How much audio distortion does the WM8750LSEFL introduce?
The WM8750LSEFL provides -95 dB DAC total harmonic distortion and -90 dB ADC total harmonic distortion at 48 kHz and 3.3 V. According to the Wolfson Microelectronics datasheet, the associated converter signal-to-noise ratios are 98 dB A-weighted for the DAC and 95 dB A-weighted for the ADC. These figures apply to the stated measurement conditions, so system-level performance should also be evaluated with the selected microphone, speaker, and analog routing.
Is the WM8750LSEFL suitable for portable audio products?
The WM8750LSEFL is specifically designed for portable audio applications and integrates the converters, microphone interface, headphone output, and speaker driver into one codec. Its 3.3 V operating condition, 98 dB A-weighted DAC SNR, 95 dB A-weighted ADC SNR, and 400 mW mono BTL speaker output align with compact playback, recording, and headset products. Thermal and load checks remain necessary for the selected speaker impedance and enclosure.
What microphone features does the WM8750LSEFL provide?
The WM8750LSEFL includes a complete stereo or mono microphone interface with programmable automatic level control and a programmable noise gate. According to the Wolfson Microelectronics datasheet, these functions are integrated into the codec rather than requiring separate analog front-end devices. The exact input routing, gain settings, filter selections, and register values should be configured from the manufacturer register description and application guidance.
What can replace the WM8750LSEFL?
The WM8750LSEFL should be replaced only with a device that has the same package, pin assignments, power rails, digital interface, clock requirements, and compatible register map. A functionally similar stereo codec is not automatically a drop-in replacement because headphone and speaker outputs may use different pins or electrical limits. Use the Request a Quote form on this page to request current sourcing support and provide the PCB revision and replacement requirements.
Is there a verified drop-in replacement for WM8750LSEFL?
No verified cross-brand drop-in replacement is established for the WM8750LSEFL. The available cross-reference search does not identify a competing MPN with confirmed pin-to-pin compatibility and equivalent electrical behavior. Because a true drop-in must preserve the package, pinout, supply voltage, clocking, digital interface, and register compatibility, do not substitute a codec solely by headline features. Request sourcing support with the complete electrical and PCB requirements.
What is the best alternative-brand equivalent for WM8750LSEFL?
No alternative-brand equivalent can be recommended as a confirmed drop-in replacement for the WM8750LSEFL from the documented compatibility information. According to the Wolfson Microelectronics datasheet, this codec combines specific ADC, DAC, microphone, headphone, and BTL speaker functions, but equivalent headline specifications do not establish pin compatibility. Use the Request a Quote form on this page to identify current lifecycle and sourcing options for an exact original or qualified replacement.
WM8750LSEFL vs a generic stereo audio codec: which is better for portable audio?
The WM8750LSEFL is the stronger integrated choice when a portable design needs both recording and playback in a compact implementation. According to the Wolfson Microelectronics datasheet, it provides 98 dB A-weighted DAC SNR, 95 dB A-weighted ADC SNR, programmable microphone processing, a 400 mW mono BTL speaker driver, and a headphone output above 40 mW into 16 ohms at 3.3 V. A generic codec may reduce circuitry but will not guarantee this feature combination.
When should I choose the WM8750LSEFL instead of a larger codec platform?
Choose the WM8750LSEFL when the design needs a compact, integrated portable-audio signal path rather than a multi-channel or highly programmable audio platform. Its stereo ADC and DAC, programmable microphone interface, headphone driver, and 400 mW mono BTL speaker driver cover common portable playback and recording requirements. Its 98 dB A-weighted DAC SNR and 95 dB A-weighted ADC SNR provide useful performance density for space-constrained designs.
How should the WM8750LSEFL speaker and headphone outputs be designed?
Treat the 400 mW mono BTL speaker output and the greater-than-40-mW headphone output as separate loads. According to the Wolfson Microelectronics datasheet, the BTL speaker stage is intended for a bridged speaker connection, while the headphone driver drives a 16-ohm load at 3.3 V. Follow the manufacturer application circuit for output filters, coupling components, grounding, and protection rather than treating the two outputs as interchangeable amplifier channels.
Where to buy the WM8750LSEFL online and what is the current lead time?
Use the Request a Quote form on this page to request the current WM8750LSEFL price, stock position, minimum order quantity, and lead time. The component is a legacy Wolfson Microelectronics stereo codec with a 400 mW mono BTL speaker driver, so lifecycle status and order quantity may materially affect procurement. Submit the exact MPN, target quantity, date code requirement, and shipping destination for a current quotation.

Data referensi kejuruteraan untuk WM8750LSEFL — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the WM8750LSEFL for a compact portable-audio design that needs integrated recording, playback, microphone conditioning, headphone drive, and moderate-power speaker output. Its 98 dB A-weighted DAC SNR, 95 dB A-weighted ADC SNR, programmable automatic level control, programmable noise gate, 400 mW mono BTL speaker stage, and greater-than-40-mW headphone output provide a broad feature set in one device. It is especially appropriate for portable players, headsets, smart-home endpoints, and compact recorders operating from 3.3 V. A higher-performance or multi-channel codec may be preferable when the design requires balanced outputs, multiple microphones, greater output power, or a different digital interface. Do not select an alternative as a drop-in replacement unless the package pinout, supply requirements, clock architecture, audio interface, and software configuration have all been verified. For exact sourcing, lifecycle questions, or obsolete-stock requirements, use the Request a Quote form on this page.

Perbandingan dengan Gantian

Parametr Produk Ini
Device Type Stereo audio codec
Brand Wolfson Microelectronics
DAC SNR 98 dB A-weighted
DAC Total Harmonic Distortion -95 dB at 48 kHz and 3.3 V
ADC SNR 95 dB A-weighted
ADC Total Harmonic Distortion -90 dB at 48 kHz and 3.3 V
Speaker Output 400 mW mono BTL
Headphone Output Greater than 40 mW into 16 ohms at 3.3 V
Microphone Interface Stereo or mono with programmable ALC and noise gate

Catatan Desain

Separate the microphone, headphone, and speaker routing from high-speed digital audio traces. Use the manufacturer application schematic to identify analog input and output networks, and place their associated passive components close to the corresponding pins. Keep the BTL speaker connections away from sensitive microphone inputs because the bridge-tied-load output uses both output terminals as active signals. Verify the ground-return arrangement on the manufacturer reference layout before releasing PCB artwork.

Follow the datasheet requirements for analog and digital supply connections and decoupling. The documented 98 dB DAC SNR and 95 dB ADC SNR are measured at 3.3 V, making supply integrity especially relevant to the converter performance. Place low-ESR decoupling capacitors at the appropriate supply pins, keep their current loops compact, and avoid routing supply and return paths through noisy speaker-driver return currents. Confirm the actual noise and ripple tolerance of each rail during system testing.

Estimated: speaker power dissipation is approximately 0.4 W when the integrated BTL stage operates at its documented 400 mW output condition. This estimate uses the documented 400 mW output and excludes codec overhead and efficiency losses; actual device dissipation also depends on load, supply voltage, signal duty cycle, and ambient temperature. Verify the maximum operating case at the highest expected speaker impedance, because a lower impedance can increase output current and thermal stress.

Do not substitute a generic stereo codec solely because its DAC and ADC headline specifications appear similar. Drop-in replacement requires matching package pins, supply rails, clocking, digital audio format, control interface, clocking, and software register behavior. The BTL speaker output also requires the correct bridge connection and must not be treated as a conventional ground-referenced amplifier output. Review the complete manufacturer pinout and register map during any replacement or second-source evaluation.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

Compliance status is not stated in the manufacturer feature information available for this part. The lead-free suffix must not be interpreted as a complete RoHS, REACH, halogen-free, or conflict-minerals declaration.

Data disahkan pada: 2026-11-10 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

WM8750LSEFL datasheet WM8750LSEFL datasheet pdf WM8750LSEFL pinout Wolfson WM8750LSEFL WM8750LSEFL specifications WM8750LSEFL replacement WM8750LSEFL equivalent WM8750LSEFL cross reference WM8750LSEFL price WM8750LSEFL stock WM8750LSEFL application circuit WM8750LSEFL schematic

Komponen dan Tanda berkaitan

Wolfson Microelectronics WM8750LSEFL WM8750 audio codec mixed-signal IC audio interface IC semiconductor stereo ADC stereo DAC automatic level control ALC programmable noise gate bridge-tied-load speaker driver BTL speaker driver headphone driver portable audio 3.3 V power supply signal-to-noise ratio SNR total harmonic distortion THD 48 kHz sampling rate RoHS REACH AEC-Q100
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ