XC3S700A-4FG484I - 700K Gate Spartan-3A FPGA | AMD
MPN: XC3S700A-4FG484I ✗ Akhir HayatXC3S700A-4FG484I Ringkasan
A field-programmable gate array is a programmable semiconductor that combines configurable logic blocks, programmable interconnect, and input/output resources into one device. In the product hierarchy, an FPGA is a programmable-logic IC, while the Spartan-3A family occupies the cost-sensitive, low-to-medium-density segment. Instead of implementing a fixed digital function in mask-programmed silicon, engineers define the logic and signal routing in a hardware description and configure the FPGA after manufacture.
The XC3S700A-4FG484I combines 700,000 gates with 372 user I/Os in a 23 x 23 mm FBGA-484 package. Its 13,248-cell architecture can support parallel datapaths, protocol bridges, control logic, and embedded state machines. The -4 speed designation identifies the device performance grade, while the 484-ball package supports dense board-level integration without relying on a large leaded package.
The device is built on 90 nm CMOS technology and uses a 1.2 V core supply, making it appropriate for designs that need substantial programmable logic without the power and complexity of a larger FPGA. Its 667 MHz listed maximum frequency provides a useful timing target for synchronous control, clocked data paths, and communication interfaces. Exact timing closure remains design- and tool-dependent because external memory interfaces, I/O timing, and routing can alter the achievable clock.
Typical uses include industrial networking equipment, programmable control systems, communications gateways, sensor aggregation, and embedded instrumentation. The 372 I/O count is especially useful when a design must connect multiple buses, capture parallel data, or bridge processors and peripherals. A single FPGA can consolidate control logic and interface adaptation without requiring several separate programmable devices.
PCB implementation should follow the AMD package pinout and recommended power, decoupling, and thermal-layout guidance. The 484-ball FBGA requires careful escape routing, multiple power planes, and plane-via distribution to control impedance and return current. Designers should also budget device configuration time and verify that the selected bitstream, clocking architecture, and I/O standards are supported by the implementation flow.
This product page combines the device specifications, manufacturer family documentation, package details, practical design considerations, and verified drop-in candidates. It also distinguishes ordering and temperature-grade suffixes so engineers can identify a direct replacement without assuming that a different commercial-grade or speed-grade variant is electrically identical.
Pilihan pengganti yang segera untuk XC3S700A-4FG484I — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera XC3S700A-4FG484I (sama faktor bentuk dan kaki) — berbeza dalam Device Type, Package.
XC3S700A-4FGG484I
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XC3S700AN-4FGG484I
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XC3S700A-4FGG484C
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XC3S700AN-4FGG484C
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XC3S700AN-5FGG484C
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XC3S700A-4FG484I Penilaian maksimum & Ciri-ciri Elektrik
| FPGA Family | Spartan-3A |
| Logic Gates | 700,000 gates |
| Logic Cells | 13,248 cells |
| User I/O Count | 372 I/O |
| Maximum Performance Frequency | 667 MHz |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Kemasan | 484-pin FBGA |
| Package Body Size | 23 x 23 mm |
| Device Type | Field-programmable gate array |
| Speed Grade | -4 |
| Temperature-Grade Suffix | I |
| CLB Count | 1,472 CLBs |
| Status RoHS | Compliant |
| AEC-Q100 Qualification | Not applicable |
| Jenis Pemasangan | Surface mount |
Panduan Konfigurasi Pin XC3S700A-4FG484I 23 x 23 mm
Konfigurasi pin untuk XC3S700A-4FG484I (23 x 23 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk XC3S700A-4FG484I.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
XC3S700A-4FG484I patut untuk 6 aplikasis: Industrial Network Interface Controller, Programmable Communications Gateway, Parallel Sensor Aggregation, Embedded Control and Data Acquisition, Signal Processing Front End, Programmable Test and Measurement Front End.
Industrial Network Interface Controller
The XC3S700A-4FG484I fits an industrial network interface that must combine protocol conversion, packet handling, and supervisory logic in one programmable device. Its 372 user I/Os provide enough parallel connectivity for multiple PHY-facing buses, status signals, and external control interfaces, while 13,248 logic cells can support state machines, buffers, and protocol engines. The listed 667 MHz maximum frequency is suitable for synchronous datapaths, although final timing depends on routing, I/O standards, and the selected clocking architecture. The AMD Spartan-3A family documentation provides the basis for resource budgeting and device selection.
Disebarkan
Programmable Communications Gateway
The XC3S700A-4FG484I can serve as the central programmable element in a communications gateway by terminating several serial or parallel interfaces and moving data between protocol domains. Its 700,000-gate architecture and 372 I/Os leave room for framing logic, FIFO-like storage, address decoding, and management functions beyond the physical interface blocks. The 90 nm Spartan-3A implementation is appropriate for cost-sensitive embedded gateways rather than high-bandwidth fabric devices. Design work should verify every required I/O standard and clock domain in the AMD implementation flow before committing the pin assignment.
Disebarkan
Parallel Sensor Aggregation
The XC3S700A-4FG484I is suitable for acquiring and processing parallel sensor data when a system has more channels than a small microcontroller can conveniently handle. Its 372 user I/Os can connect sensor banks, conditioning signals, counters, and external memories, while the 13,248-cell logic fabric can perform filtering, calibration, thresholding, and timestamp logic. The listed 667 MHz performance supports clocked acquisition pipelines, but sensor timing, input thresholds, and external interface latency must be checked against the selected I/O mode. The 484-pin FBGA also supports a compact, high-pin-count board implementation.
Disebarkan
Embedded Control and Data Acquisition
The XC3S700A-4FG484I can consolidate machine-control sequencing, data capture, and peripheral adaptation in embedded industrial equipment. Its 1,472 configurable logic blocks and 372 I/Os allow multiple independent control loops and parallel devices to be implemented without a large ASIC. The 1.2 V core supply and 90 nm process identify it as a conventional CMOS FPGA, so board-level power integrity and I/O voltage compatibility remain essential. Engineers should partition slow control logic from timing-sensitive acquisition paths and validate the design timing at the selected -4 speed grade.
Disebarkan
Signal Processing Front End
The XC3S700A-4FG484I can implement parallel filtering, correlation, waveform conversion, or data conditioning ahead of a processor or data converter. Its 13,248 logic cells and listed 667 MHz frequency provide substantial combinational and sequential capacity for sample-based pipelines, while 372 I/Os accommodate wide parallel buses. The Spartan-3A architecture is better matched to moderate-rate embedded processing than very high-throughput digital signal processing, so designers should evaluate arithmetic throughput, DSP resources, and external memory bandwidth before finalizing the partition. The AMD family data sheet remains the authority for device-specific resource limits.
Disebarkan
Programmable Test and Measurement Front End
The XC3S700A-4FG484I is useful in programmable test equipment that requires extensive stimulus generation, response capture, timing control, and communication logic in a single device. Its 372 user I/Os can connect test fixtures, counters, converters, and control peripherals, while the programmable fabric permits reusable instrument sequencing and timing control. The 1.2 V core architecture requires careful decoupling and clean clock distribution, particularly when driving precision external converters. Timing analysis should include package-routing effects and the specified I/O timing rather than relying only on the nominal 667 MHz device figure.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk XC3S700A-4FG484I — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | XC3S700A-4FGG484I | XC3S700AN-4FGG484I | XC3S700A-4FGG484C | XC3S700AN-4FGG484C | XC3S700AN-5FGG484C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FBGA-484 (23 x 23 mm) | FBGA-484 (23 x 23 mm) | FBGA-484 (23 x 23 mm) | FBGA-484 (23 x 23 mm) | FBGA-484 (23 x 23 mm) | FBGA-484 (23 x 23 mm) |
| FPGA Family | Spartan-3A | Spartan-3A | Spartan-3AN | Spartan-3A | Spartan-3AN | Spartan-3AN |
| Logic Gates | 700,000 gates | 700,000 gates | 700,000 gates | 700,000 gates | 700,000 gates | 700,000 gates |
| Logic Cells | 13,248 cells | 13,248 cells | 13,248 cells | 13,248 cells | 13,248 cells | 13,248 cells |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Speed and Temperature Suffix | -4 speed, I suffix | -4 speed, I suffix | -4 speed, I suffix | -4 speed, C suffix | -4 speed, C suffix | -5 speed, C suffix |
Penyeberangsung Jelas
- Direct 484-pin density continuity (vsXC3S700A-4FGG484I)
- High I/O availability for multi-interface designs (vsXC3S700AN-5FGG484C)
- Dense logic and connectivity in one package (vsXC3S700AN-4FGG484C)
Catatan Desain
Treat the 484-pin FBGA as a high-density routing problem. Use the AMD package drawing and pinout to assign every ball, escape the device with the shortest practical traces, and place nearby-layer ground connections where the recommended footprint permits. Maintain uninterrupted reference planes beneath the device and use multiple vias between power and ground planes to reduce inductance. PCB stack-up and impedance calculations must be based on the actual board material and copper thickness rather than the nominal 667 MHz device frequency.
Implement the 1.2 V core rail with low-impedance plane distribution and place local high-frequency decoupling at the supply balls as directed by the AMD Spartan-3A design guidance. Sequence the core and I/O supplies according to the selected device requirements and verify startup behavior with the complete power-supply network. Keep switching-regulator loops and high-current routing away from sensitive clock and configuration paths. Because this is a 90 nm legacy FPGA, stable rails are especially important during configuration and high-resource switching activity.
Control every external clock and high-speed interface through the supported I/O standard, with source- and destination-terminated routing where required by the architecture. Use the AMD implementation tools for timing analysis and do not infer timing closure from the listed 667 MHz maximum alone. Account for package effects, external memory delays, clock skew, and synchronization paths. A design that meets timing in the logic fabric can still fail if clock distribution, I/O registers, or board-level return paths are poorly controlled.
Do not substitute an XC3S700AN or differently suffixed XC3S700A solely because it has a 484-pin FBGA. Confirm the exact ball functions, speed grade, temperature range, configuration scheme, supported I/O modes, and design-tool version. For an existing PCB, also compare power sequencing and startup behavior. Keep a documented bitstream compatibility review because Spartan-3A and Spartan-3AN devices can share a footprint without being interchangeable at every configuration and tool level.
Maklumat Kesediaan
The product is listed as RoHS compliant. No verified AEC-Q100, REACH, halogen-free, lead-free, or conflict-minerals declaration was identified for the exact MPN.