XC3S700A-4FG484I - 700K Gate Spartan-3A FPGA | AMD
부품 번호: XC3S700A-4FG484I ✗ 단종XC3S700A-4FG484I 개요
A field-programmable gate array is a programmable semiconductor that combines configurable logic blocks, programmable interconnect, and input/output resources into one device. In the product hierarchy, an FPGA is a programmable-logic IC, while the Spartan-3A family occupies the cost-sensitive, low-to-medium-density segment. Instead of implementing a fixed digital function in mask-programmed silicon, engineers define the logic and signal routing in a hardware description and configure the FPGA after manufacture.
The XC3S700A-4FG484I combines 700,000 gates with 372 user I/Os in a 23 x 23 mm FBGA-484 package. Its 13,248-cell architecture can support parallel datapaths, protocol bridges, control logic, and embedded state machines. The -4 speed designation identifies the device performance grade, while the 484-ball package supports dense board-level integration without relying on a large leaded package.
The device is built on 90 nm CMOS technology and uses a 1.2 V core supply, making it appropriate for designs that need substantial programmable logic without the power and complexity of a larger FPGA. Its 667 MHz listed maximum frequency provides a useful timing target for synchronous control, clocked data paths, and communication interfaces. Exact timing closure remains design- and tool-dependent because external memory interfaces, I/O timing, and routing can alter the achievable clock.
Typical uses include industrial networking equipment, programmable control systems, communications gateways, sensor aggregation, and embedded instrumentation. The 372 I/O count is especially useful when a design must connect multiple buses, capture parallel data, or bridge processors and peripherals. A single FPGA can consolidate control logic and interface adaptation without requiring several separate programmable devices.
PCB implementation should follow the AMD package pinout and recommended power, decoupling, and thermal-layout guidance. The 484-ball FBGA requires careful escape routing, multiple power planes, and plane-via distribution to control impedance and return current. Designers should also budget device configuration time and verify that the selected bitstream, clocking architecture, and I/O standards are supported by the implementation flow.
This product page combines the device specifications, manufacturer family documentation, package details, practical design considerations, and verified drop-in candidates. It also distinguishes ordering and temperature-grade suffixes so engineers can identify a direct replacement without assuming that a different commercial-grade or speed-grade variant is electrically identical.
드롭인 대체품: XC3S700A-4FG484I — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XC3S700A-4FG484I (동일 폼 팩터 및 풋프린트) — 차이점: Device Type, Package.
XC3S700A-4FGG484I
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC3S700AN-4FGG484I
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC3S700A-4FGG484C
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC3S700AN-4FGG484C
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC3S700AN-5FGG484C
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC3S700A-4FG484I 최대 정격 & 전기적 특성
| FPGA Family | Spartan-3A |
| Logic Gates | 700,000 gates |
| Logic Cells | 13,248 cells |
| User I/O Count | 372 I/O |
| Maximum Performance Frequency | 667 MHz |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| 패키지 | 484-pin FBGA |
| Package Body Size | 23 x 23 mm |
| Device Type | Field-programmable gate array |
| Speed Grade | -4 |
| Temperature-Grade Suffix | I |
| CLB Count | 1,472 CLBs |
| RoHS 상태 | Compliant |
| AEC-Q100 Qualification | Not applicable |
| 실장 유형 | Surface mount |
XC3S700A-4FG484I 23 x 23 mm 핀 구성 가이드
XC3S700A-4FG484I(23 x 23 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XC3S700A-4FG484I.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XC3S700A-4FG484I 적합 용도: 6 애플리케이션s: Industrial Network Interface Controller, Programmable Communications Gateway, Parallel Sensor Aggregation, Embedded Control and Data Acquisition, Signal Processing Front End, Programmable Test and Measurement Front End.
Industrial Network Interface Controller
The XC3S700A-4FG484I fits an industrial network interface that must combine protocol conversion, packet handling, and supervisory logic in one programmable device. Its 372 user I/Os provide enough parallel connectivity for multiple PHY-facing buses, status signals, and external control interfaces, while 13,248 logic cells can support state machines, buffers, and protocol engines. The listed 667 MHz maximum frequency is suitable for synchronous datapaths, although final timing depends on routing, I/O standards, and the selected clocking architecture. The AMD Spartan-3A family documentation provides the basis for resource budgeting and device selection.
추천
Programmable Communications Gateway
The XC3S700A-4FG484I can serve as the central programmable element in a communications gateway by terminating several serial or parallel interfaces and moving data between protocol domains. Its 700,000-gate architecture and 372 I/Os leave room for framing logic, FIFO-like storage, address decoding, and management functions beyond the physical interface blocks. The 90 nm Spartan-3A implementation is appropriate for cost-sensitive embedded gateways rather than high-bandwidth fabric devices. Design work should verify every required I/O standard and clock domain in the AMD implementation flow before committing the pin assignment.
추천
Parallel Sensor Aggregation
The XC3S700A-4FG484I is suitable for acquiring and processing parallel sensor data when a system has more channels than a small microcontroller can conveniently handle. Its 372 user I/Os can connect sensor banks, conditioning signals, counters, and external memories, while the 13,248-cell logic fabric can perform filtering, calibration, thresholding, and timestamp logic. The listed 667 MHz performance supports clocked acquisition pipelines, but sensor timing, input thresholds, and external interface latency must be checked against the selected I/O mode. The 484-pin FBGA also supports a compact, high-pin-count board implementation.
추천
Embedded Control and Data Acquisition
The XC3S700A-4FG484I can consolidate machine-control sequencing, data capture, and peripheral adaptation in embedded industrial equipment. Its 1,472 configurable logic blocks and 372 I/Os allow multiple independent control loops and parallel devices to be implemented without a large ASIC. The 1.2 V core supply and 90 nm process identify it as a conventional CMOS FPGA, so board-level power integrity and I/O voltage compatibility remain essential. Engineers should partition slow control logic from timing-sensitive acquisition paths and validate the design timing at the selected -4 speed grade.
추천
Signal Processing Front End
The XC3S700A-4FG484I can implement parallel filtering, correlation, waveform conversion, or data conditioning ahead of a processor or data converter. Its 13,248 logic cells and listed 667 MHz frequency provide substantial combinational and sequential capacity for sample-based pipelines, while 372 I/Os accommodate wide parallel buses. The Spartan-3A architecture is better matched to moderate-rate embedded processing than very high-throughput digital signal processing, so designers should evaluate arithmetic throughput, DSP resources, and external memory bandwidth before finalizing the partition. The AMD family data sheet remains the authority for device-specific resource limits.
추천
Programmable Test and Measurement Front End
The XC3S700A-4FG484I is useful in programmable test equipment that requires extensive stimulus generation, response capture, timing control, and communication logic in a single device. Its 372 user I/Os can connect test fixtures, counters, converters, and control peripherals, while the programmable fabric permits reusable instrument sequencing and timing control. The 1.2 V core architecture requires careful decoupling and clean clock distribution, particularly when driving precision external converters. Timing analysis should include package-routing effects and the specified I/O timing rather than relying only on the nominal 667 MHz device figure.
추천
추천 제품 요약
엔지니어링 참조 데이터: XC3S700A-4FG484I — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XC3S700A-4FGG484I | XC3S700AN-4FGG484I | XC3S700A-4FGG484C | XC3S700AN-4FGG484C | XC3S700AN-5FGG484C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FBGA-484 (23 x 23 mm) | FBGA-484 (23 x 23 mm) | FBGA-484 (23 x 23 mm) | FBGA-484 (23 x 23 mm) | FBGA-484 (23 x 23 mm) | FBGA-484 (23 x 23 mm) |
| FPGA Family | Spartan-3A | Spartan-3A | Spartan-3AN | Spartan-3A | Spartan-3AN | Spartan-3AN |
| Logic Gates | 700,000 gates | 700,000 gates | 700,000 gates | 700,000 gates | 700,000 gates | 700,000 gates |
| Logic Cells | 13,248 cells | 13,248 cells | 13,248 cells | 13,248 cells | 13,248 cells | 13,248 cells |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Speed and Temperature Suffix | -4 speed, I suffix | -4 speed, I suffix | -4 speed, I suffix | -4 speed, C suffix | -4 speed, C suffix | -5 speed, C suffix |
주요 차별점
- Direct 484-pin density continuity (vs XC3S700A-4FGG484I)
- High I/O availability for multi-interface designs (vs XC3S700AN-5FGG484C)
- Dense logic and connectivity in one package (vs XC3S700AN-4FGG484C)
설계 노트
Treat the 484-pin FBGA as a high-density routing problem. Use the AMD package drawing and pinout to assign every ball, escape the device with the shortest practical traces, and place nearby-layer ground connections where the recommended footprint permits. Maintain uninterrupted reference planes beneath the device and use multiple vias between power and ground planes to reduce inductance. PCB stack-up and impedance calculations must be based on the actual board material and copper thickness rather than the nominal 667 MHz device frequency.
Implement the 1.2 V core rail with low-impedance plane distribution and place local high-frequency decoupling at the supply balls as directed by the AMD Spartan-3A design guidance. Sequence the core and I/O supplies according to the selected device requirements and verify startup behavior with the complete power-supply network. Keep switching-regulator loops and high-current routing away from sensitive clock and configuration paths. Because this is a 90 nm legacy FPGA, stable rails are especially important during configuration and high-resource switching activity.
Control every external clock and high-speed interface through the supported I/O standard, with source- and destination-terminated routing where required by the architecture. Use the AMD implementation tools for timing analysis and do not infer timing closure from the listed 667 MHz maximum alone. Account for package effects, external memory delays, clock skew, and synchronization paths. A design that meets timing in the logic fabric can still fail if clock distribution, I/O registers, or board-level return paths are poorly controlled.
Do not substitute an XC3S700AN or differently suffixed XC3S700A solely because it has a 484-pin FBGA. Confirm the exact ball functions, speed grade, temperature range, configuration scheme, supported I/O modes, and design-tool version. For an existing PCB, also compare power sequencing and startup behavior. Keep a documented bitstream compatibility review because Spartan-3A and Spartan-3AN devices can share a footprint without being interchangeable at every configuration and tool level.
규정 준수 정보
The product is listed as RoHS compliant. No verified AEC-Q100, REACH, halogen-free, lead-free, or conflict-minerals declaration was identified for the exact MPN.