AMD

XC7A100T-L2FGG676E - 101440-Cell 28nm Artix-7 FPGA | AMD

MPN: XC7A100T-L2FGG676E ✓ Aktif
1 V Vdss 676-ball FCBGA Package L2 Speed Programmable flash configuration storage Memory
MOQ: 1 |

XC7A100T-L2FGG676E Ringkasan

The AMD XC7A100T-L2FGG676E is an Artix-7 field-programmable gate array built on 28 nm technology, with 101,440 programmable logic cells, 300 I/O, and a 676-ball FCBGA package. The L2 speed grade targets a balance between performance and power consumption, while the E suffix denotes an extended-temperature product option.

A field-programmable gate array is a programmable semiconductor containing configurable logic blocks, programmable interconnect, block RAM, digital signal processing resources, and input/output blocks. Within the FPGA hierarchy, this device belongs to the Artix-7 family, which is positioned below larger Kintex-7 devices in logic capacity and general capability. Engineers use Artix-7 devices for compact control, instrumentation, communications, industrial, and embedded-processing systems.

The XC7A100T-L2FGG676E provides 101,440 logic cells and 300 user I/O in a 676-ball FCBGA package. Its 28 nm process node supports high performance while maintaining a relatively low power profile compared with larger programmable devices. The 676-ball package exposes substantially more I/O than smaller Artix-7 packages, allowing high-pin-count external memory interfaces, high-speed serial links, and parallel expansion buses.

Programmable logic resources are combined with dedicated memory and arithmetic blocks to implement parallel data processing, digital filtering, protocol handling, and control functions. Because the configuration is stored in programmable flash, the device can execute a complete embedded design without an external processor. Its large I/O count also allows designers to connect external DDR memory, transceivers, clocks, and application-specific peripherals.

Typical uses include industrial automation controllers, data-acquisition systems, network interface equipment, high-speed test equipment, and embedded signal-processing platforms. The 676-ball package is appropriate when a design requires more I/O than a 324-ball or 484-ball Artix-7 package can offer. The larger package also requires careful power delivery, via planning, and signal-integrity control on the printed circuit board.

When designing a PCB for this FPGA, follow the AMD package pinout files and Artix-7 power, thermal, and layout guidance. Decoupling, independent supply rails, configuration access, clocking, and high-speed routing must be planned before placement. Treat any migration to another Artix-7 device as a new layout and timing-review exercise rather than an automatic substitution.

This page combines device specifications, package details, drop-in candidate comparisons, and practical PCB design guidance. It is intended to help engineers confirm the correct device, migration constraints, and implementation checklist before committing an Artix-7 design to production.

Pilihan pengganti yang segera untuk XC7A100T-L2FGG676E — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera XC7A100T-L2FGG676E (sama faktor bentuk dan kaki) — berbeza dalam Package, Mounting Type, Process Technology, Configuration Memory, Device Type.

AMD
Package: 676-ball BGA
Configuration Memory: 4,976,640 bits
Device Type: Field-Programmable Gate Array (FPGA)
Bandingkan Dengan XC7A100T-L2FGG676E →
AMD
Package: 676-pin fine-pitch BGA
Mounting Type: Surface-mount fine-pitch BGA
Process Technology: 28 nm CMOS
Bandingkan Dengan XC7A100T-L2FGG676E →

XC7A100T-2FGG676I

✅ Masuk Drop-In
📦 676-BGA (FCBGA)
Spesifikasi serupa

Hubungi untuk harga

XC7A100T-2FGG676C

✅ Masuk Drop-In
AMD
📦 676-BGA (FCBGA)
Artix-7 · Field-Programmable Gate Array (FPGA) · 101,440 cells · 4,976,640 bits · 300 I/O · 28 nm · 1 V · 676-ball BGA

Hubungi untuk harga

Lihat Datasheet →

XC7A100T-3FGG676E

✅ Masuk Drop-In
📦 676-BGA (FCBGA)
Same XC7A100T device and FGG676 footprint; -3 speed grade is faster than L2, with correspondingly different dynamic power and thermal behavior

📋 Alternatif rujukan (tidak dalam katalog)

XC7A75T-L2FGG676E

✅ Masuk Drop-In
AMD
📦 676-BGA (FCBGA)
Artix-7 field-programmable gate array (FPGA) · 75,520 cells · 300 I/O · 28 nm CMOS · 0.9 V · 676-pin fine-pitch BGA · Artix-7 · L2 low-power option

Hubungi untuk harga

Lihat Datasheet →

XC7A100T-L1FGG676E

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 676-BGA (FCBGA)
Same XC7A100T device, L-series power profile, E temperature code, and FGG676 footprint; L1 speed grade is slower than L2 by approximately 10% in the rated speed designation

📋 Alternatif rujukan (tidak dalam katalog)

XC7A100T-L2FGG676E Penilaian maksimum & Ciri-ciri Elektrik

Device Type Artix-7 Field-Programmable Gate Array
Logic Cells 101,440 cells
Process Technology 28 nm
User I/O 300 I/O
Kemasan 676-ball FCBGA
Core Supply Voltage 1 V
Speed Grade L2
Temperature Grade Code E
Jenis Pemasangan Surface Mount
Programmable Logic Configurable FPGA logic and interconnect
Configuration Memory Programmable flash configuration storage

Panduan Konfigurasi Pin XC7A100T-L2FGG676E 676-ball fcbga

Konfigurasi pin untuk XC7A100T-L2FGG676E (676-ball fcbga pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 676-ball fcbga untuk XC7A100T-L2FGG676E

Tiada data garisan pin yang diperoleh untuk XC7A100T-L2FGG676E.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

XC7A100T-L2FGG676E patut untuk 6 aplikasis: Industrial Automation and Motion Control, High-Speed Data Acquisition and Test Systems, Network Interface and Protocol Processing, Embedded Parallel Signal Processing, Aerospace and Defense Ground Support Equipment, Programmable Logic Prototyping and Education.

🏭

Industrial Automation and Motion Control

The XC7A100T-L2FGG676E fits industrial controllers that combine sequential logic, parallel data acquisition, timers, counters, and communication interfaces in a single programmable device. Its 101,440 logic cells and 300 user I/O allow control logic to be consolidated while retaining enough external connections for encoders, discrete I/O, analog front ends, and field-bus transceivers. The 676-ball FCBGA also gives the design room for short, well-controlled routing to memory and high-speed interface devices. Use the L2 power profile to balance processing performance against thermal load, and review clock, isolation, and industrial interface requirements before production release.

📟

High-Speed Data Acquisition and Test Systems

The AMD XC7A100T-L2FGG676E is appropriate for parallel data-acquisition, pattern-generation, and automated test equipment because programmable logic can implement sampling pipelines, trigger logic, and real-time processing concurrently. The device provides 300 user I/O for high-pin-count converters, capture memories, and timing analyzers, while its 101,440 logic cells support substantial channel multiplexing and digital correction. Place the FPGA close to the acquisition components to minimize skew across parallel buses, and use the package pinout files to assign capable I/O banks to clock, data, and control signals.

🌐

Network Interface and Protocol Processing

The XC7A100T-L2FGG676E can implement parallel Ethernet, custom serial protocols, packet filtering, and protocol bridging because it combines programmable logic with 300 I/O and a large 676-ball package. Parallel interface channels can be distributed across the package to shorten connections to memory and network PHYs, while dedicated logic resources can maintain frame parsing, checksum handling, and buffering. Designers should use the Artix-7 select I/O guidance to evaluate supported standards and skew limits for each I/O bank. A clocking strategy with dedicated configuration and user clocks helps avoid timing closure problems in high-throughput designs.

📡

Embedded Parallel Signal Processing

The 101,440 logic cells and 300 user I/O of the XC7A100T-L2FGG676E allow DSP, filtering, and sensor-fusion pipelines to be implemented as a tightly integrated FPGA subsystem. Parallel arithmetic stages can operate on multiple channels simultaneously, and the large I/O count simplifies connections to ADCs, DACs, and digital sensor arrays. Place high-speed converters on the same or adjacent PCB layers as the FPGA to control return paths and inter-pair skew. Use a clocking architecture with low-skew distribution, then validate the complete design with post-route timing and board-level signal-integrity analysis.

✈️

Aerospace and Defense Ground Support Equipment

The XC7A100T-L2FGG676E can be evaluated for ground-support, telemetry-processing, and test-equipment platforms where programmable logic provides deterministic parallel operation and extensive I/O. The 676-ball FCBGA package supports high-density routing for multi-channel interfaces, and the 101,440 logic cells allow acquisition, framing, and validation logic to share one device. The E ordering code indicates an extended-temperature option, but the exact temperature limits and qualification status must be confirmed for the selected ordering option. Controlled-bay or ground-equipment applications should still undergo environmental, radiation-policy, and long-term availability review.

🧩

Programmable Logic Prototyping and Education

The XC7A100T-L2FGG676E provides a large logic fabric and 300 I/O for universities, research laboratories, and hardware prototyping teams that need to build custom interfaces, processor subsystems, or accelerator cores. Because the device is programmable, the same hardware can support multiple experiments through bitstream updates without changing the PCB. The 676-ball package makes external memory and peripheral experiments flexible, although students and lab developers must follow the package escape-routing and decoupling requirements. A separate configuration interface, clock source, and logic analyzer connection make board bring-up and bitstream verification more repeatable.

What is the AMD XC7A100T-L2FGG676E?
The AMD XC7A100T-L2FGG676E is an Artix-7 field-programmable gate array with 101,440 logic cells, 300 user I/O, and a 676-ball FCBGA package. It is manufactured on 28 nm technology and uses a nominal 1 V core supply. The L2 designation identifies its speed and power profile, while E identifies the extended-temperature ordering option. Its 676-ball package supports designs requiring substantially more I/O than smaller Artix-7 packages.
How many logic cells and I/O does the XC7A100T-L2FGG676E have?
The XC7A100T-L2FGG676E contains 101,440 programmable logic cells and provides 300 user I/O. The large I/O count is useful for external DDR memory interfaces, parallel data buses, control signals, and high-speed serial links. Because an FPGA can combine programmable logic, block RAM, and DSP resources in one device, the 300 available I/O allow a substantial embedded system to be implemented without a separate processor.
Where can I download the XC7A100T-L2FGG676E datasheet PDF?
The XC7A100T-L2FGG676E datasheet PDF is available through the AMD Artix-7 Data Sheet listing and the datasheet mirror indexed for this exact orderable part. Use the document covering Artix-7 DC and AC switching characteristics for electrical limits and timing, and use the AMD Artix-7 package pinout files for the authoritative 676-ball pin list. Confirm that the document revision covers the L2FGG676E ordering option.
Where can I find the XC7A100T-L2FGG676E pinout?
The authoritative XC7A100T-L2FGG676E pinout is available in the AMD Artix-7 package device pinout files, which are published in TXT and CSV formats. The pin-description table in the manufacturer datasheet should be used when assigning power, ground, configuration, clock, and user I/O functions. This page does not reproduce all 676 ball assignments because the package uses a dense BGA arrangement and the complete assignment must come directly from the package files.
Can the XC7A100T-2FGG676I replace the XC7A100T-L2FGG676E?
The XC7A100T-2FGG676I uses the same Artix-7 XC7A100T device and 676-ball FGG package as the XC7A100T-L2FGG676E, so it is a strong board-level migration candidate. The differences are ordering characteristics: the -2FGG676I is the -2 speed grade with industrial temperature designation, while the target carries the L2 low-power and E extended-temperature codes. Verify temperature requirements, power characteristics, timing margins, and procurement status before replacing it.
What is the difference between XC7A100T-L2FGG676E and XC7A100T-2FGG676C?
Both devices use the Artix-7 XC7A100T architecture, 101,440 logic cells, 28 nm process technology, and 676-ball FGG package. The target carries L2 and E ordering codes, while the XC7A100T-2FGG676C carries the -2 speed grade and commercial temperature designation. The migration is primarily an ordering-code and temperature-review decision, so confirm the board power budget and the required commercial or extended temperature range.
Is the XC7A100T-3FGG676E a drop-in replacement?
The XC7A100T-3FGG676E is a faster Artix-7 XC7A100T device in the same 676-ball FGG package, making it mechanically compatible with the XC7A100T-L2FGG676E footprint. It is not an automatic functional substitution because the -3 speed grade and operating characteristics differ from the L2 low-power grade. Use it when the design requires the faster grade and its power, thermal, and timing consequences have been accepted.
What can replace the XC7A100T-L2FGG676E?
The closest board-level replacements are other XC7A100T devices in the 676-ball FGG package, including the XC7A100T-2FGG676I, XC7A100T-2FGG676C, XC7A100T-3FGG676E, and the L1FGG676E ordering option. Every candidate requires a fresh review of speed grade, temperature grade, timing, power, and PCB thermal performance. Cross-family Kintex-7 devices are not drop-in replacements for Artix-7 because their pin compatibility is not guaranteed.
When should I choose the L2FGG676E instead of a faster Artix-7 grade?
Choose the XC7A100T-L2FGG676E when the design needs the balance represented by the L2 low-power ordering option and does not require the maximum timing performance of a -3 device. The 300 I/O and 676-ball package remain valuable in either case, but speed-grade changes can alter dynamic power, thermal margin, and timing closure. Select the exact grade during the design review rather than substituting it late in production.
Is the XC7A100T-L2FGG676E suitable for high-speed external memory designs?
The XC7A100T-L2FGG676E is suitable for many high-speed external memory designs because it provides 300 user I/O in a 676-ball FCBGA package. The actual interface limit depends on the selected I/O standard, clocking scheme, PCB topology, and timing margin. Use the Artix-7 select I/O guidance and the package pinout files, and complete signal-integrity simulations before committing to trace lengths and layer transitions.
What are the key specifications engineers should know about the XC7A100T-L2FGG676E?
The key engineering specifications are 101,440 logic cells, 300 user I/O, 28 nm process technology, a nominal 1 V core supply, and a 676-ball FCBGA package. The L2 ordering code identifies the target performance and power profile, and the E code identifies an extended-temperature option. Exact DSP, block RAM, transceiver, timing, and thermal figures should be taken from the exact ordering-option tables in the Artix-7 manufacturer documentation.
Is a smaller XC7A100T package a drop-in alternative?
No. Smaller XC7A100T packages such as the 324-ball CSG324 and 484-ball FGG484 devices do not share the 676-ball FGG footprint of the XC7A100T-L2FGG676E. Changing between these packages requires a new placement, routing, power distribution, and signal-integrity design. The XC7A100T-2FGG484C can serve as a design alternative when the required I/O count fits, but it is not a physical drop-in replacement.
Where can I buy the XC7A100T-L2FGG676E online?
Use the Request a Quote form on this page to request the current XC7A100T-L2FGG676E quotation, stock confirmation, and lead time. The form allows you to specify the required quantity and shipment destination without relying on a static price listing. Confirm authorized sourcing, date codes, traceability, and programming support as part of the purchasing request.
What is the lead time for the XC7A100T-L2FGG676E?
The current lead time for the XC7A100T-L2FGG676E should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, allocation status, and shipment destination. At the same time, request current stock, factory lead time, and the permitted date-code range so the sourcing plan can distinguish material already available from material requiring production allocation.
How much does the XC7A100T-L2FGG676E cost?
The current XC7A100T-L2FGG676E quotation is available through the Request a Quote form on this page. Submit the required quantity, target shipment date, and delivery location to receive a current commercial response. Volume breaks, extended-temperature sourcing, traceability, and programming services can change the final commercial terms, so obtain a quotation rather than relying on a historical catalog figure.

Data referensi kejuruteraan untuk XC7A100T-L2FGG676E — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the XC7A100T-L2FGG676E when the design needs the full 101,440-cell Artix-7 XC7A100T fabric, 300 user I/O, and the 676-ball package without requiring the maximum speed of the -3 grade. The XC7A100T-2FGG676I or XC7A100T-2FGG676C are practical same-footprint migrations when a different speed or temperature ordering code is commercially preferable. Select XC7A100T-3FGG676E only when its higher performance justifies a new power and thermal review. The XC7A75T-L2FGG676E shares the package family but has lower logic capacity, so it is appropriate only after utilization and timing checks confirm adequate resources. None of the smaller-package Artix-7 devices is a physical drop-in replacement. For every migration, regenerate the bitstream, repeat static timing analysis, verify configuration and power sequencing, and review the final PCB thermal and signal-integrity performance.

Perbandingan dengan Gantian

Parametr Produk Ini XC7A100T-2FGG676I XC7A100T-2FGG676C XC7A100T-3FGG676E XC7A75T-L2FGG676E XC7A100T-L1FGG676E
Brand AMD AMD AMD AMD AMD AMD
Package 676-BGA (FCBGA) 676-BGA (FCBGA) - same footprint 676-BGA (FCBGA) - same footprint 676-BGA (FCBGA) - same footprint 676-BGA (FCBGA) - same footprint 676-BGA (FCBGA) - same footprint
Device Family Artix-7 XC7A100T Artix-7 XC7A100T Artix-7 XC7A100T Artix-7 XC7A100T Artix-7 XC7A75T Artix-7 XC7A100T
Process Technology 28 nm 28 nm 28 nm 28 nm 28 nm 28 nm
Speed Grade L2 -2 -2 -3 L2 L1
Temperature Grade Code E I C E E E
Core Supply Voltage 1 V 1 V 1 V 1 V 1 V 1 V
Configuration Interface Programmable flash Programmable flash Programmable flash Programmable flash Programmable flash Programmable flash

Penyeberangsung Jelas

  • Maintains the complete 101,440-cell Artix-7 XC7A100T logic capacity (vsXC7A75T-L2FGG676E)
  • Combines the L2 power profile with an E temperature ordering code (vsXC7A100T-2FGG676I)
  • Provides 300 user I/O in the 676-ball FCBGA footprint (vsXC7A100T-2FGG484C)
  • L2 performance grade avoids the higher dynamic-power consequences of the -3 grade (vsXC7A100T-3FGG676E)

Catatan Desain

The 1 V core and the L2 power profile require careful rail planning even though the logic fabric uses a modern 28 nm process. Partition the supply network into the core and I/O-related rails specified by the manufacturer, use the recommended decoupling at each supply ball group, and keep high-current switching paths away from sensitive configuration and clock inputs. Review the finished design against the Artix-7 power-estimation workflow because utilization and I/O activity can increase dynamic current above simple logic averages.

Use the AMD Artix-7 package pinout files as the controlling assignment source for the 676-ball FCBGA footprint. Verify pad mapping, ball numbering, power-group connections, and exposed thermal requirements before releasing Gerber data. Dense escape routing should preserve access to configuration pins, clock-capable pins, and all required supply balls. After layout, run signal integrity, return-path, and power-plane checks with the final stack-up rather than with generic package assumptions.

Treat the BGA footprint as a thermal design problem, not only an electrical routing problem. Spread heat into the inner layers with a thermal-via array beneath the device and avoid blocking heat transfer with keep-out regions or overly dense unrelated circuitry. Validate the PCB with the package thermal model and the actual enclosure environment. A faster grade such as XC7A100T-3FGG676E can change dynamic power and junction temperature, so repeat the thermal review after any speed-grade migration.

Do not treat a different XC7A100T package as a drop-in substitute. The 324-ball CSG324 and 484-ball FGG484 devices require different footprints, escape routing, power distribution, and thermal solutions. For candidates using the same 676-ball package, still review timing, speed grade, temperature grade, power behavior, configuration, and procurement constraints. Artix-7 pin compatibility should be confirmed within the family using the AMD Series 7 compatibility documentation and the exact package device maps.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The exact compliance declarations for this ordering option must be confirmed against the current AMD product documentation and the relevant declaration files.

Pencarian Berhubungan

xc7a100t datasheet xc7a100t fpga XC7A100T-L2FGG676E datasheet pdf XC7A100T-L2FGG676E pinout XC7A100T-L2FGG676E equivalent XC7A100T-L2FGG676E replacement XC7A100T-L2FGG676E vs XC7A100T-2FGG676I AMD XC7A100T-L2FGG676E XC7A100T-L2FGG676E price XC7A100T-L2FGG676E stock xc7a100t 2fgg484i xc7a100t 1csg324c xc7a100t 2csg324i xc7a100t 1fgg484i xc7a100t fgg484

Komponen dan Tanda berkaitan

AMD Xilinx XC7A100T-L2FGG676E XC7A100T-2FGG676I XC7A100T-2FGG676C XC7A100T-3FGG676E XC7A75T-L2FGG676E Artix-7 field-programmable gate array FPGA programmable logic block RAM DSP 28 nm process technology 676-ball FCBGA BGA package 300 user I/O 101,440 logic cells L2 speed grade extended-temperature grade programmable flash Artix-7 pin compatibility UG475 Series 7 device migration
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ