XC7A100T-L2FGG676E - 101440-Cell 28nm Artix-7 FPGA | AMD
MPN: XC7A100T-L2FGG676E ✓ فعالXC7A100T-L2FGG676E جائزہ
A field-programmable gate array is a programmable semiconductor containing configurable logic blocks, programmable interconnect, block RAM, digital signal processing resources, and input/output blocks. Within the FPGA hierarchy, this device belongs to the Artix-7 family, which is positioned below larger Kintex-7 devices in logic capacity and general capability. Engineers use Artix-7 devices for compact control, instrumentation, communications, industrial, and embedded-processing systems.
The XC7A100T-L2FGG676E provides 101,440 logic cells and 300 user I/O in a 676-ball FCBGA package. Its 28 nm process node supports high performance while maintaining a relatively low power profile compared with larger programmable devices. The 676-ball package exposes substantially more I/O than smaller Artix-7 packages, allowing high-pin-count external memory interfaces, high-speed serial links, and parallel expansion buses.
Programmable logic resources are combined with dedicated memory and arithmetic blocks to implement parallel data processing, digital filtering, protocol handling, and control functions. Because the configuration is stored in programmable flash, the device can execute a complete embedded design without an external processor. Its large I/O count also allows designers to connect external DDR memory, transceivers, clocks, and application-specific peripherals.
Typical uses include industrial automation controllers, data-acquisition systems, network interface equipment, high-speed test equipment, and embedded signal-processing platforms. The 676-ball package is appropriate when a design requires more I/O than a 324-ball or 484-ball Artix-7 package can offer. The larger package also requires careful power delivery, via planning, and signal-integrity control on the printed circuit board.
When designing a PCB for this FPGA, follow the AMD package pinout files and Artix-7 power, thermal, and layout guidance. Decoupling, independent supply rails, configuration access, clocking, and high-speed routing must be planned before placement. Treat any migration to another Artix-7 device as a new layout and timing-review exercise rather than an automatic substitution.
This page combines device specifications, package details, drop-in candidate comparisons, and practical PCB design guidance. It is intended to help engineers confirm the correct device, migration constraints, and implementation checklist before committing an Artix-7 design to production.
کے لیے ڈراپ اِن متبادل XC7A100T-L2FGG676E — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں XC7A100T-L2FGG676E (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Mounting Type, Process Technology, Configuration Memory, Device Type.
XC7A100T-2FGG676C
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC7A100T-3FGG676E
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC7A75T-L2FGG676E
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC7A100T-L1FGG676E
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC7A100T-L2FGG676E زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Device Type | Artix-7 Field-Programmable Gate Array |
| Logic Cells | 101,440 cells |
| Process Technology | 28 nm |
| User I/O | 300 I/O |
| پیکیج | 676-ball FCBGA |
| Core Supply Voltage | 1 V |
| Speed Grade | L2 |
| Temperature Grade Code | E |
| ماؤنٹنگ ٹائپ | Surface Mount |
| Programmable Logic | Configurable FPGA logic and interconnect |
| Configuration Memory | Programmable flash configuration storage |
XC7A100T-L2FGG676E 676-ball fcbga پن کنفیگریشن گائیڈ
XC7A100T-L2FGG676E (676-ball fcbga پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں XC7A100T-L2FGG676E.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
XC7A100T-L2FGG676E کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Automation and Motion Control, High-Speed Data Acquisition and Test Systems, Network Interface and Protocol Processing, Embedded Parallel Signal Processing, Aerospace and Defense Ground Support Equipment, Programmable Logic Prototyping and Education.
Industrial Automation and Motion Control
The XC7A100T-L2FGG676E fits industrial controllers that combine sequential logic, parallel data acquisition, timers, counters, and communication interfaces in a single programmable device. Its 101,440 logic cells and 300 user I/O allow control logic to be consolidated while retaining enough external connections for encoders, discrete I/O, analog front ends, and field-bus transceivers. The 676-ball FCBGA also gives the design room for short, well-controlled routing to memory and high-speed interface devices. Use the L2 power profile to balance processing performance against thermal load, and review clock, isolation, and industrial interface requirements before production release.
تجویز کردہ
High-Speed Data Acquisition and Test Systems
The AMD XC7A100T-L2FGG676E is appropriate for parallel data-acquisition, pattern-generation, and automated test equipment because programmable logic can implement sampling pipelines, trigger logic, and real-time processing concurrently. The device provides 300 user I/O for high-pin-count converters, capture memories, and timing analyzers, while its 101,440 logic cells support substantial channel multiplexing and digital correction. Place the FPGA close to the acquisition components to minimize skew across parallel buses, and use the package pinout files to assign capable I/O banks to clock, data, and control signals.
تجویز کردہ
Network Interface and Protocol Processing
The XC7A100T-L2FGG676E can implement parallel Ethernet, custom serial protocols, packet filtering, and protocol bridging because it combines programmable logic with 300 I/O and a large 676-ball package. Parallel interface channels can be distributed across the package to shorten connections to memory and network PHYs, while dedicated logic resources can maintain frame parsing, checksum handling, and buffering. Designers should use the Artix-7 select I/O guidance to evaluate supported standards and skew limits for each I/O bank. A clocking strategy with dedicated configuration and user clocks helps avoid timing closure problems in high-throughput designs.
تجویز کردہ
Embedded Parallel Signal Processing
The 101,440 logic cells and 300 user I/O of the XC7A100T-L2FGG676E allow DSP, filtering, and sensor-fusion pipelines to be implemented as a tightly integrated FPGA subsystem. Parallel arithmetic stages can operate on multiple channels simultaneously, and the large I/O count simplifies connections to ADCs, DACs, and digital sensor arrays. Place high-speed converters on the same or adjacent PCB layers as the FPGA to control return paths and inter-pair skew. Use a clocking architecture with low-skew distribution, then validate the complete design with post-route timing and board-level signal-integrity analysis.
تجویز کردہ
Aerospace and Defense Ground Support Equipment
The XC7A100T-L2FGG676E can be evaluated for ground-support, telemetry-processing, and test-equipment platforms where programmable logic provides deterministic parallel operation and extensive I/O. The 676-ball FCBGA package supports high-density routing for multi-channel interfaces, and the 101,440 logic cells allow acquisition, framing, and validation logic to share one device. The E ordering code indicates an extended-temperature option, but the exact temperature limits and qualification status must be confirmed for the selected ordering option. Controlled-bay or ground-equipment applications should still undergo environmental, radiation-policy, and long-term availability review.
تجویز کردہ
Programmable Logic Prototyping and Education
The XC7A100T-L2FGG676E provides a large logic fabric and 300 I/O for universities, research laboratories, and hardware prototyping teams that need to build custom interfaces, processor subsystems, or accelerator cores. Because the device is programmable, the same hardware can support multiple experiments through bitstream updates without changing the PCB. The 676-ball package makes external memory and peripheral experiments flexible, although students and lab developers must follow the package escape-routing and decoupling requirements. A separate configuration interface, clock source, and logic analyzer connection make board bring-up and bitstream verification more repeatable.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا XC7A100T-L2FGG676E — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | XC7A100T-2FGG676I | XC7A100T-2FGG676C | XC7A100T-3FGG676E | XC7A75T-L2FGG676E | XC7A100T-L1FGG676E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-BGA (FCBGA) | 676-BGA (FCBGA) - same footprint | 676-BGA (FCBGA) - same footprint | 676-BGA (FCBGA) - same footprint | 676-BGA (FCBGA) - same footprint | 676-BGA (FCBGA) - same footprint |
| Device Family | Artix-7 XC7A100T | Artix-7 XC7A100T | Artix-7 XC7A100T | Artix-7 XC7A100T | Artix-7 XC7A75T | Artix-7 XC7A100T |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Speed Grade | L2 | -2 | -2 | -3 | L2 | L1 |
| Temperature Grade Code | E | I | C | E | E | E |
| Core Supply Voltage | 1 V | 1 V | 1 V | 1 V | 1 V | 1 V |
| Configuration Interface | Programmable flash | Programmable flash | Programmable flash | Programmable flash | Programmable flash | Programmable flash |
اہم امتیازی خصوصیات
- Maintains the complete 101,440-cell Artix-7 XC7A100T logic capacity (بمقابلہXC7A75T-L2FGG676E)
- Combines the L2 power profile with an E temperature ordering code (بمقابلہXC7A100T-2FGG676I)
- Provides 300 user I/O in the 676-ball FCBGA footprint (بمقابلہXC7A100T-2FGG484C)
- L2 performance grade avoids the higher dynamic-power consequences of the -3 grade (بمقابلہXC7A100T-3FGG676E)
ڈیزائن نوٹس
The 1 V core and the L2 power profile require careful rail planning even though the logic fabric uses a modern 28 nm process. Partition the supply network into the core and I/O-related rails specified by the manufacturer, use the recommended decoupling at each supply ball group, and keep high-current switching paths away from sensitive configuration and clock inputs. Review the finished design against the Artix-7 power-estimation workflow because utilization and I/O activity can increase dynamic current above simple logic averages.
Use the AMD Artix-7 package pinout files as the controlling assignment source for the 676-ball FCBGA footprint. Verify pad mapping, ball numbering, power-group connections, and exposed thermal requirements before releasing Gerber data. Dense escape routing should preserve access to configuration pins, clock-capable pins, and all required supply balls. After layout, run signal integrity, return-path, and power-plane checks with the final stack-up rather than with generic package assumptions.
Treat the BGA footprint as a thermal design problem, not only an electrical routing problem. Spread heat into the inner layers with a thermal-via array beneath the device and avoid blocking heat transfer with keep-out regions or overly dense unrelated circuitry. Validate the PCB with the package thermal model and the actual enclosure environment. A faster grade such as XC7A100T-3FGG676E can change dynamic power and junction temperature, so repeat the thermal review after any speed-grade migration.
Do not treat a different XC7A100T package as a drop-in substitute. The 324-ball CSG324 and 484-ball FGG484 devices require different footprints, escape routing, power distribution, and thermal solutions. For candidates using the same 676-ball package, still review timing, speed grade, temperature grade, power behavior, configuration, and procurement constraints. Artix-7 pin compatibility should be confirmed within the family using the AMD Series 7 compatibility documentation and the exact package device maps.
تعمیل کی معلومات
The exact compliance declarations for this ordering option must be confirmed against the current AMD product documentation and the relevant declaration files.