XC7A50T-L1CSG325I 52,160-Cell Artix-7 FPGA | AMD
MPN: XC7A50T-L1CSG325I ✓ AktifXC7A50T-L1CSG325I Ringkasan
An FPGA is a semiconductor device whose digital logic, interconnect, and configurable I/O are programmed after manufacture. Artix-7 FPGAs occupy the low-cost, low-power portion of the AMD 7 Series portfolio, combining programmable logic with integrated memory resources and analog mixed-signal peripherals. Compared with a fixed-function application-specific integrated circuit, an FPGA allows interface standards, control sequences, and parallel data paths to be revised through a new configuration bitstream without changing the PCB.
The XC7A50T-L1CSG325I provides 52,160 logic cells and 150 I/O in a compact 324-ball package. Its 28 nm process supports efficient implementation of control logic, communication bridges, data acquisition, and embedded signal-processing functions. The associated XC7A50T-1CSG325I information identifies a 0.95 V to 1.05 V core-supply range and a maximum clock frequency of 1098 MHz. These figures establish useful design targets for timing closure, power planning, and external memory-interface implementation.
The CSG325 package supports a high-density ball-grid interface intended for multilayer PCB construction. Pin assignment must follow the AMD Artix-7 package pinout files and UG475 conventions rather than a generic BGA drawing. Differential clock inputs, configuration pins, power rails, and user I/O require careful bank-specific planning because voltage standards, current capacity, and simultaneous-switching-noise limits depend on the selected bank and supply configuration.
Typical implementations include industrial automation, camera and image-processing interfaces, test equipment, low-cost communications infrastructure, embedded control, and general-purpose prototyping. The device is particularly useful when several interfaces require concurrent operation and the firmware or configuration may evolve. A 150-I/O resource count supports parallel buses and control peripherals while conserving board area compared with a larger package.
Power and layout planning should begin with the manufacturer configuration, bank assignment, and decoupling guidance. Keep each power rail close to its assigned supply pins, use the prescribed decoupling network, provide clean clocking, and control return paths for high-speed interfaces. Configuration storage, programming access, and voltage sequencing must also be designed according to the Artix-7 configuration guidelines before power is applied.
This page combines the Artix-7 device identity, package details, application guidance, migration options, and PCB-design considerations to support component selection and engineering review. It also distinguishes speed-grade and temperature-grade alternatives that retain the CSG325 footprint, helping teams identify a compatible replacement while recognizing that every migration still requires timing, power, and configuration verification.
Pilihan pengganti yang segera untuk XC7A50T-L1CSG325I — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera XC7A50T-L1CSG325I (sama faktor bentuk dan kaki) — berbeza dalam Logic Cells, Package, Speed Grade, Temperature Grade.
XC7A50T-1CSG325I
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XC7A50T-2CSG325I
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →XC7A50T-1CSG325C
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XC7A50T-2CSG325C
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XC7A50T-3CSG325I
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
XC7A50T-L1CSG325I Penilaian maksimum & Ciri-ciri Elektrik
| Device Type | Artix-7 field-programmable gate array |
| Logic Cells | 52,160 cells |
| User I/O | 150 I/O |
| Process Technology | 28 nm |
| Core Supply Voltage | 0.95 V to 1.05 V |
| Frekuensi Klock Maksimum | 1098 MHz |
| Kemasan | 324-ball CSPBGA, 324-LFBGA |
| Device Family | Artix-7 |
| FPGA Type | FPGA |
| Architecture | 7 Series FPGA |
| Speed Grade | -1 |
| Temperature Grade | Industrial |
| Jenis Pemasangan | Surface mount |
| Packaging Form | Tray |
| Programmable Logic | FPGA configuration bitstream |
Panduan Konfigurasi Pin XC7A50T-L1CSG325I 324-ball cspbga, 324-lfbga
Konfigurasi pin untuk XC7A50T-L1CSG325I (324-ball cspbga, 324-lfbga pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk XC7A50T-L1CSG325I.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
XC7A50T-L1CSG325I patut untuk 6 aplikasis: Industrial Automation Controller, Machine Vision Interface, Test and Measurement Equipment, Embedded Communications Bridge, Data Acquisition System, Programmable Logic Prototype.
Industrial Automation Controller
The XC7A50T-L1CSG325I is appropriate for an industrial controller that combines machine sequencing, sensor conditioning interfaces, and communications logic. Its 52,160 logic cells provide capacity for control state machines and parallel data handling, while 150 user I/O support multiple digital interfaces without requiring the largest Artix-7 package. The industrial suffix supports deployment in temperature-demanding equipment, subject to the exact limits in the AMD data sheet. Place the FPGA beside the sensor interface circuitry, use separate clock and power planes, and validate timing for motor-control, encoder, and safety-adjacent signals before production release.
Disebarkan
Machine Vision Interface
The XC7A50T-L1CSG325I can serve as the programmable interface between image sensors and downstream processing. Its 150 I/O provide parallel sensor-control, synchronization, and data-capture paths, while 52,160 logic cells can implement timing generation, packet assembly, buffer management, and test-pattern logic. The -1 device is suitable when timing analysis confirms that the selected clocking and I/O standards meet the required frame rate. Use the AMD CSG325 pinout to place clock-capable inputs near clock-generation circuitry, route source-synchronous interfaces with controlled impedance, and validate timing margins against the worst-case sensor and cable conditions.
Disebarkan
Test and Measurement Equipment
The XC7A50T-L1CSG325I is useful in programmable test equipment where pattern generation, acquisition control, and timing must be changed without redesigning the PCB. The 52,160-cell fabric can support multiple concurrent state machines, while 150 I/O allow dense connections to instruments and fixtures. Its -1 speed grade and industrial suffix are relevant to equipment operating outside benign room-temperature conditions. Engineers should partition clock regions carefully, use dedicated configuration storage, and confirm acquisition timing through post-route static timing analysis. Power sequencing and I/O voltage selection must follow the device bank rules for every connected peripheral.
Disebarkan
Embedded Communications Bridge
The XC7A50T-L1CSG325I can implement protocol conversion, packet buffering, and parallel-to-serial interface bridging in compact communications equipment. Its 52,160 logic cells allow multiple protocol engines and buffering functions to coexist, while 150 I/O support parallel backplanes, status signals, and external memory interfaces. A -1 timing closure is appropriate when the design does not require the additional margin of a faster speed grade. Keep high-speed transceiver traces away from sensitive configuration and reference-clock paths, provide continuous return-plane references, and validate protocol timing after each device or constraint change.
Disebarkan
Data Acquisition System
The XC7A50T-L1CSG325I supports compact data-acquisition designs requiring digital triggering, channel control, timestamp management, and data transfer. Its 150 I/O can accommodate parallel sensor outputs and control signals, while the programmable fabric can implement custom filtering or preprocessing without a separate fixed-function controller. The -1 grade and industrial suffix align with applications where temperature reliability and repeatable timing are important. Engineer the design with separate analog and digital return paths, matched-length clock routing, and defined acquisition-window timing. Confirm every I/O standard, drive strength, and bank-voltage combination before fabrication because the 150 I/O are not electrically interchangeable.
Disebarkan
Programmable Logic Prototype
The XC7A50T-L1CSG325I is well suited to prototypes that need substantial programmable logic, multiple external interfaces, and a package already common in Artix-7 designs. A 52,160-cell device can host processor peripherals, bus bridges, and custom accelerators while 150 I/O expose enough connectivity for experimentation. The CSG325 footprint also enables controlled migration among compatible Artix-7 density and speed options after design review. Keep the prototype board's power rails, clocking, configuration storage, and JTAG access standards-based so that later migration changes the bitstream and constraints more often than the physical PCB.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk XC7A50T-L1CSG325I — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | XC7A50T-1CSG325I | XC7A50T-2CSG325I | XC7A50T-1CSG325C | XC7A50T-2CSG325C | XC7A50T-3CSG325I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | CSG325, 324-ball CSPBGA | CSG325, 324-ball CSPBGA | CSG325, 324-ball CSPBGA | CSG325, 324-ball CSPBGA | CSG325, 324-ball CSPBGA | CSG325, 324-ball CSPBGA |
| Logic Cells | 52,160 cells | 52,160 cells | 52,160 cells | 52,160 cells | 52,160 cells | 52,160 cells |
| User I/O | 150 I/O | 150 I/O | 150 I/O | 150 I/O | 150 I/O | 150 I/O |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Speed Grade | -1 | -1 | -2 | -1 | -2 | -3 |
| Temperature Grade | Industrial | Commercial | Industrial | Commercial | Commercial | Industrial |
Penyeberangsung Jelas
- Industrial temperature-grade identity (vsXC7A50T-1CSG325I)
- Same-footprint speed-grade flexibility (vsXC7A50T-2CSG325I)
- Complete package identity for PCB reuse (vsXC7A50T-3CSG325I)
Catatan Desain
Use the AMD Artix-7 CSG325 package pinout files and UG475 conventions before assigning any BGA ball. Create separate net classes for clocks, high-speed serial links, and ordinary I/O; assign via fields and layer transitions to the FPGA package rather than using general-purpose routing. Maintain uninterrupted reference planes beneath clock and differential pairs, and place decoupling capacitance directly at the associated supply balls. A ball-map error on a 324-ball package can defeat otherwise correct high-level design.
Plan the core, auxiliary, and I/O supply rails as a coordinated power tree rather than independent regulators. Follow the manufacturer power-sequencing diagram, account for configuration behavior during ramp-up, and verify absolute maximum, minimum, and steady-state limits for every rail. For the -1 device, the core-supply range is listed as 0.95 V to 1.05 V. Confirm bank-voltage compatibility for all connected peripherals and calculate worst-case power across temperature, utilization, and clock activity.
Treat the 1098 MHz figure as a device-class timing reference rather than a guaranteed interface rate for every design. Constrain clock-capable input routing, use the most appropriate clock-capable ball, and include realistic board, package, and peripheral uncertainty in timing analysis. For source-synchronous or differential interfaces, derive trace-length and impedance constraints from the selected I/O standard, account for connector and via effects, and verify eye or timing margin rather than relying only on RTL simulation.
Do not treat a different speed or temperature suffix as an automatic functional substitution. A commercial-grade replacement may fail the product's environmental requirements even when its PCB footprint is identical, while a faster grade may change timing and power behavior. Before migration, compare the exact AMD ordering information, regenerate constraints, recompile the design, perform static timing analysis, and check configuration memory, termination, and bank constraints. No cross-manufacturer pin-compatible alternative is established for this device.
Maklumat Kesediaan
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified in the listed sources. The I suffix identifies the industrial temperature grade but does not by itself establish AEC-Q100 qualification.