XC7Z010-3CLG400E - 866MHz Zynq SoC with 28K Logic Cells
MPN: XC7Z010-3CLG400E ✓ AktifXC7Z010-3CLG400E Ringkasan
A Zynq system-on-chip is an FPGA and processor integration. The processor subsystem handles operating-system software, networking, control functions, and general-purpose applications, while the programmable-logic subsystem implements custom hardware, accelerators, interfaces, and real-time datapaths. The XC7Z010 belongs to the Zynq-7000 hierarchy, combining an Arm Cortex-A9 microprocessor system with Artix-7 programmable logic and CoreSight debug capabilities in one semiconductor package.
The XC7Z010-3CLG400E provides 28K logic cells, an 866 MHz maximum processor frequency, and a 400-CSPBGA package. Its integrated design reduces the number of discrete components needed for a processor-plus-FPGA system and permits direct communication between the processing system and programmable logic. This architecture is particularly useful when software must coordinate hardware, when deterministic logic must coexist with a general-purpose processor, or when product updates need both programmable software and configurable hardware.
The -3 ordering code identifies the device speed grade, while CLG400 identifies the 400-ball chip-scale BGA package and E identifies the commercial temperature option. Because the package integrates hundreds of power, ground, signal, and configuration connections, the PCB must follow the AMD package guidelines, including controlled BGA pad geometry, appropriate escape routing, and properly designed power and ground planes.
Typical implementations include industrial control gateways, camera and vision systems, programmable-logic test equipment, embedded Linux products, industrial Ethernet equipment, and low-latency signal-processing platforms. In these systems, the Arm Cortex-A9 processors can run control software while programmable logic handles deterministic acquisition, protocol conversion, filtering, or interface tasks.
For a new design, follow the AMD Zynq-7000 data sheet, package pinout files, PCB design guidance, and Vivado implementation rules. Pay particular attention to supply rails, decoupling, BGA assembly, clocking, configuration boot sources, and memory-interface layout. Existing boards must also be reviewed for speed-grade, temperature-grade, timing, and software qualification changes before substitution.
This product page consolidates the Zynq-7000 SoC specifications, package information, same-footprint alternatives, application guidance, and design considerations into one engineering-oriented reference for FPGA, embedded, and hardware-design teams.
Pilihan pengganti yang segera untuk XC7Z010-3CLG400E — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera XC7Z010-3CLG400E (sama faktor bentuk dan kaki) — berbeza dalam Package, Processor Core.
XC7Z010-2CLG400I
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →XC7Z010-1CLG400C
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →XC7Z010-1CLG225C
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →XC7Z007S-1CLG400
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XC7Z010-3CLG400E Penilaian maksimum & Ciri-ciri Elektrik
| Device Type | Zynq-7000 Artix-7 system-on-chip |
| Processor Core | Dual-core Arm Cortex-A9 MPCore |
| Maximum Processor Frequency | 866 MHz |
| Programmable Logic Cells | 28K cells |
| Programmable Logic Process | 28 nm |
| Debug Architecture | Arm CoreSight |
| Kemasan | 400-CSPBGA, 17 mm × 17 mm |
| Package Pin Count | 400 balls |
| Jenis Pemasangan | Surface-mount chip-scale BGA |
| Speed Grade | -3 |
| Temperature Grade | Commercial, E suffix |
| Minimum Processor Supply | 950 mV |
| Maximum Processor Supply | 1.8 V |
| Status RoHS | Compliant |
Panduan Konfigurasi Pin XC7Z010-3CLG400E 400 balls
Konfigurasi pin untuk XC7Z010-3CLG400E (400 balls pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk XC7Z010-3CLG400E.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
XC7Z010-3CLG400E patut untuk 6 aplikasis: Industrial Control Gateway, Machine Vision and Camera Processing, Programmable Test and Measurement, Embedded Linux Networking Equipment, Data Acquisition and Signal Conditioning, LED and Lighting Control.
Industrial Control Gateway
The XC7Z010-3CLG400E fits industrial gateways that must run network services while also handling protocol-specific hardware timing. Its dual Arm Cortex-A9 cores can handle Linux, control logic, and communications, while the 28K programmable-logic cells can accelerate packet processing, implement industrial interfaces, or coordinate deterministic I/O. Placing both functions in one 400-CSPBGA device reduces interconnects between the processor subsystem and programmable logic and supports compact embedded control platforms. The -3 speed grade provides additional processor headroom for gateway workloads, but Vivado timing closure and the industrial temperature requirement must be checked against the exact system specification.
Disebarkan
Machine Vision and Camera Processing
The XC7Z010-3CLG400E is suitable for machine-vision controllers where pixel transport, exposure timing, and image pre-processing require programmable logic alongside higher-level software. The 28K logic cells can implement interfaces, capture timing, color conversion, or data movement while the dual Arm Cortex-A9 MPCore processors execute image-processing algorithms and supervisory tasks. Integrating these functions avoids routing large image buffers through an external processor-to-FPGA interface. Designers should use AMD's CLG400 package files and Zynq timing guidance to constrain external memory and high-speed interfaces, particularly when image throughput approaches the target's -3 timing limits.
Disebarkan
Programmable Test and Measurement
The XC7Z010-3CLG400E supports programmable test systems that combine deterministic signal handling with an embedded user interface and network control. The programmable-logic section can execute acquisition, pattern generation, timing, or interface logic, while the Cortex-A9 subsystem runs control software, diagnostics, and remote communications. This division of labor is useful when a single instrument must provide flexible software configuration alongside repeatable hardware timing. Because the package contains 400 balls, the instrument PCB needs careful BGA fanout, controlled impedance, supply distribution, and thermal design; designers should follow AMD's package pinout files rather than infer connections from a generic board outline.
Disebarkan
Embedded Linux Networking Equipment
The XC7Z010-3CLG400E is appropriate for embedded networking products that require operating-system support, storage access, multiple communication interfaces, and hardware-assisted packet handling. Its dual Cortex-A9 MPCore subsystem can divide networking, management, and application workloads, while programmable logic can implement dedicated media access, protocol conversion, or line-rate interfaces. The 28 nm Zynq integration also reduces board area compared with a separate processor and FPGA. For production deployment, validate Linux device-tree configuration, boot media, DDR memory routing, Ethernet PHYs, clock sources, and thermal rise using the selected CLG400 footprint and the AMD Zynq-7000 design guidance.
Disebarkan
Data Acquisition and Signal Conditioning
The XC7Z010-3CLG400E fits data-acquisition systems that need deterministic sampling control alongside high-level analysis. Programmable logic can connect ADC and DAC interfaces, trigger acquisition, perform filtering, and manage high-throughput data paths, while the Arm processors perform calibration, analysis, and user-facing control. Combining the two domains reduces latency and external component count. The -3 speed grade can improve timing margins in processor and I/O designs, but the final implementation must be checked in Vivado at the actual memory, I/O, and clock frequencies. Signal-integrity work should include controlled-impedance routing, return paths, clock jitter budgeting, and the power-distribution network required by the Zynq architecture.
Disebarkan
LED and Lighting Control
The XC7Z010-3CLG400E can serve as the controller in intelligent LED systems requiring synchronized outputs, local graphics, monitoring, and communications. Programmable logic provides precise multi-channel timing and refresh behavior, while the dual Cortex-A9 processors manage schedules, color calculations, sensor input, and network configuration. This division allows deterministic illumination output without depending entirely on software scheduling. The integrated SoC is useful for compact lighting engines that need more control capability than a basic microcontroller. Engineering work should include output-driver selection, timing constraints for LED data streams, watchdog behavior, configuration persistence, and thermal validation of the processor, programmable logic, and external power stages within the product enclosure.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk XC7Z010-3CLG400E — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | XC7Z010-2CLG400I | XC7Z010-1CLG400I | XC7Z010-1CLG400C | XC7Z010-1CLG225C | XC7Z007S-1CLG400 |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Processor | Dual-core Arm Cortex-A9 MPCore | Dual-core Arm Cortex-A9 MPCore | Dual-core Arm Cortex-A9 MPCore | Dual-core Arm Cortex-A9 MPCore | Dual-core Arm Cortex-A9 MPCore | Dual-core Arm Cortex-A9 MPCore |
| Programmable Logic Cells | 28K cells | 28K cells | 28K cells | 28K cells | 28K cells | Approximately 7K cells |
| Speed Grade | -3 | -2 | -1 | -1 | -1 | -1 |
| Programmable Logic Process | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Debug Support | Arm CoreSight | Arm CoreSight | Arm CoreSight | Arm CoreSight | Arm CoreSight | Arm CoreSight |
Penyeberangsung Jelas
- Higher processor speed class (vsXC7Z010-1CLG400I)
- Larger programmable-logic resource than the CLG400 Z-007S (vsXC7Z007S-1CLG400)
- Higher performance class than the -2 family alternative (vsXC7Z010-2CLG400I)
- Matches the established CLG400 pin-compatible family footprint (vsXC7Z010-1CLG400C)
Catatan Desain
Create the PCB land pattern from AMD's official Zynq-7000 CLG400 package pinout files rather than from a generic 400-BGA library. Confirm pad and solder-mask dimensions, package tolerances, ball assignments, component keep-out regions, and assembly-process requirements. Route processor, memory, clock, configuration, and high-speed I/O signals according to the AMD Zynq-7000 PCB design guidance, with continuous return paths and the impedance values required by the selected interface.
Implement the processor and programmable-logic power rails as a complete Zynq-7000 power tree, including the required voltage sequences, tolerances, decoupling, and power-supply startup behavior. Place the prescribed decoupling capacitors close to their associated package balls and preserve the ground-reference path beneath the device. Validate the power-distribution network for both processor and logic activity; meeting average current requirements alone does not establish adequate dynamic voltage behavior at the BGA balls.
Estimate junction and board temperature from the processor-plus-logic power dissipation, the selected board construction, airflow, and the package thermal data in the AMD documentation. Because the -3 speed grade can sustain higher processing performance than lower-grade alternatives, thermal results should be repeated at the actual clock, utilization, I/O, and environmental limits. Use the Zynq-7000 power calculator and Vivado utilization reports to establish realistic activity assumptions, and verify the result in an assembled enclosure rather than relying on a nominal no-load estimate.
Budget external memory, Ethernet, clock, and other high-speed interfaces in Vivado using the actual PCB stack-up and target speed grade. Keep configuration and boot signals away from noisy switching nodes, provide clean clock references, and observe recommended drive, loading, and termination rules. If a lower-speed XC7Z010 is substituted for the -3 device, rerun timing analysis because processor and I/O timing margins may change even when the PCB footprint remains the same.
Do not treat the device family, speed grade, and temperature suffix as interchangeable ordering information. Before releasing a substitution, compare the complete MPN, Vivado target, package pinout, power requirements, supported boot modes, DDR configuration, CoreSight debug connections, and qualification requirements. A same-package candidate is mechanically convenient, but it is production-ready only after the full design has been reimplemented, timing-closed, and tested with the exact device fitted.
Maklumat Kesediaan
The product listing identifies the XC7Z010-3CLG400E as RoHS compliant. Other compliance attributes are not stated in the available product records and remain unknown.