AMD

XC7Z035-3FBG676E - 275K Cell Zynq SoC | AMD | Industrial

MPN: XC7Z035-3FBG676E ✓ Aktif
1 V Vdss 676-ball FCBGA, 27 mm x 27 mm Package 1 GHz Speed
MOQ: 1 |

XC7Z035-3FBG676E Ringkasan

The AMD XC7Z035-3FBG676E is a Zynq-7000 Kintex-7 system-on-chip combining a dual-core Arm Cortex-A9 processor at 1 GHz with 275,000 FPGA logic cells in a 676-ball FCBGA package measuring 27 mm by 27 mm. It integrates programmable logic, ARM Cortex-A9 processing, memory controllers, and fixed-function peripherals into one high-performance mixed-signal SoC.

A Zynq-7000 SoC is a heterogeneous programmable device in which an ARM microprocessor subsystem operates alongside FPGA fabric. This device family belongs to the broader FPGA and system-on-chip hierarchy, allowing hardware designers to implement parallel pipelines, custom interfaces, video processing, control logic, and software-driven control functions in a single package rather than combining a separate processor and FPGA.

Key characteristics include 275,000 logic cells, dual ARM Cortex-A9 MPCore processors, CoreSight debug support, and a maximum processor frequency of 1 GHz. The 28 nm implementation supports both hard real-time processing and programmable-logic acceleration. Its 676-ball FCBGA package provides a dense interface for high-speed memory, networking, display, storage, and external data acquisition.

The architecture is particularly useful when an application benefits from combining Linux-capable application processing with deterministic parallel hardware. Software can control the system and manage data movement, while FPGA logic can accelerate filtering, codecs, image processing, protocol handling, or custom interface tasks. Compared with a microcontroller alone, the integrated fabric removes much of the external glue logic normally required for high-throughput data paths.

Typical uses include industrial machine vision, factory automation, networked video processing, test and measurement systems, communications infrastructure, and embedded control platforms. The dual-core processor can partition control software from monitoring or data-processing workloads, while programmable logic interfaces directly to sensors, converters, memories, and high-speed external peripherals.

Board design requires careful attention to power rails, high-speed routing, thermal management, and BGA assembly. Use the AMD pinout, package, and power-guidance documentation to assign power, ground, configuration, and I/O balls. A 676-ball BGA also requires a multilayer PCB with controlled-impedance routing, via-in-pad or via-fanout strategies, and assembly processes capable of handling the package's ball pitch and thermal requirements.

Pilihan pengganti yang segera untuk XC7Z035-3FBG676E — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera XC7Z035-3FBG676E (sama faktor bentuk dan kaki) — berbeza dalam Device Type, Architecture, FPGA Logic Cells, Package, Package Type.

AMD
Device Type: Zynq-7000 Kintex-7 system-on-chip
Package Type: 676-FCBGA
Bandingkan Dengan XC7Z035-3FBG676E →
AMD
Device Type: Zynq-7000 All Programmable System-on-Chip
Architecture: ARM Cortex-A9 and Kintex-7 FPGA
FPGA Logic Cells: 275K logic cells
Bandingkan Dengan XC7Z035-3FBG676E →
AMD
Package: 676-FCBGA (27x27 mm)
Bandingkan Dengan XC7Z035-3FBG676E →

XC7Z035-2FBG676E

✅ Masuk Drop-In
AMD
📦 676-FCBGA (27x27)
Zynq-7000 Kintex-7 system-on-chip · Dual-core ARM Cortex-A9 MPCore · 800 MHz · 275K · Kintex-7 · CoreSight · 0°C to +100°C · 676-FCBGA

Hubungi untuk harga

Lihat Datasheet →

XC7Z035-3FFG676E

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 676-FCBGA (27x27)
Same 1 GHz processor speed rating and 676-ball footprint, with an FFG package suffix rather than FBG

📋 Alternatif rujukan (tidak dalam katalog)

XC7Z035-L2FBG676I

✅ Masuk Drop-In
📦 676-FCBGA (27x27)
Industrial temperature-grade ordering option with a lower clock-rating suffix; maximum processor frequency is not stated in the product listing

📋 Alternatif rujukan (tidak dalam katalog)

XC7Z035-2FFG676I

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
AMD
📦 676-FCBGA (27x27)
Zynq-7000 SoC · Dual ARM Cortex-A9 MPCore with CoreSight · 800 MHz · Kintex-7 based · 275K · -2 · Industrial (I suffix) · 676-FCBGA (27x27 mm)

Hubungi untuk harga

Lihat Datasheet →

XC7Z035-1FBG676C

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
AMD
📦 676-FCBGA (27x27)
Zynq-7000 Kintex-7 programmable system-on-chip · Dual-core ARM Cortex-A9 MPCore · 667 MHz · CoreSight · Kintex-7 · 275K · 28 nm · 676-pin FCBGA

Hubungi untuk harga

Lihat Datasheet →

XC7Z035-1FFG676I

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
AMD
📦 676-FCBGA (27x27)
Zynq-7000 Kintex-7 FPGA system-on-chip · Dual-core Arm Cortex-A9 MPCore · 667 MHz · 275K logic cells · Kintex-7 · Field-programmable gate array · 676-ball FCBGA · 27 x 27 mm

Hubungi untuk harga

Lihat Datasheet →

XC7Z035-3FBG676E Penilaian maksimum & Ciri-ciri Elektrik

Device Type Zynq-7000 SoC FPGA with dual-core Arm Cortex-A9
FPGA Logic Cells 275,000 cells
Processor Cores 2 Arm Cortex-A9 cores
Maximum Processor Frequency 1 GHz
Process Technology 28 nm
Package Type 676-ball FCBGA, 27 mm x 27 mm
Terminal Count 676 balls
Tegangan Pemberi Arus 1 V
Debug Support CoreSight
Jenis Pemasangan Surface mount
Shipping Form Tray
Device Family Zynq-7000
FPGA Family Kintex-7
Architecture Zynq-7000 SoC first-generation architecture
Processor Architecture ARM Cortex-A9 MPCore

Panduan Konfigurasi Pin XC7Z035-3FBG676E 676-ball fcbga, 27 mm x 27 mm

Konfigurasi pin untuk XC7Z035-3FBG676E (676-ball fcbga, 27 mm x 27 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 676-ball fcbga, 27 mm x 27 mm untuk XC7Z035-3FBG676E

Tiada data garisan pin yang diperoleh untuk XC7Z035-3FBG676E.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

XC7Z035-3FBG676E patut untuk 6 aplikasis: Industrial Machine Vision, Video Processing, Factory Automation, Communications Infrastructure, Test and Measurement, Aerospace and Defense.

🏭

Industrial Machine Vision

The XC7Z035-3FBG676E fits industrial machine-vision systems that must acquire and process camera data while coordinating sensors and production equipment. Its 275,000 FPGA logic cells can implement parallel pixel pipelines, color conversion, thresholding, and camera-interface logic, while the dual 1 GHz Arm Cortex-A9 cores run higher-level control, diagnostics, and network services. Partitioning acquisition into programmable logic avoids transferring every pixel through the processor. The main engineering constraints are 1 V power-tree design, memory-signal integrity, thermal control, and assembly of the 676-ball FCBGA on a multilayer PCB.

📺

Video Processing

The XC7Z035-3FBG676E is appropriate for video infrastructure that benefits from combining hardware pipelines with application software. FPGA fabric can handle capture formatting, scaling, filtering, overlay, or interface conversion in parallel, while the dual Cortex-A9 processors manage frame flow, network transmission, and user control. Using 275,000 logic cells provides more parallel capacity than smaller Zynq devices, and the 1 GHz processor rating supports Linux-based control tasks. The design must budget sufficient memory bandwidth and maintain controlled impedance for high-speed video and networking interfaces while controlling package and board temperature.

⚡

Factory Automation

The XC7Z035-3FBG676E supports factory automation controllers that must coordinate motion, safety-adjacent monitoring, communications, and real-time I/O. The ARM subsystem can run control software and protocols, while FPGA logic can implement deterministic timing, encoder processing, or custom sensor acquisition outside the software scheduling path. This separation is useful when deterministic response must remain predictable under a busy operating-system workload. The 676-ball FCBGA demands careful escape-routing and power planning, but it provides the pin density required for parallel buses, high-speed serial links, and multiple external memory interfaces.

🌐

Communications Infrastructure

The XC7Z035-3FBG676E fits communications equipment requiring flexible packet processing, protocol adaptation, and system-level control. Programmable logic can implement narrow functions such as framing, CRC, buffering, or custom serial interfaces, while the dual 1 GHz Arm Cortex-A9 cores support network stacks, telemetry, and management functions. Its 275,000 logic cells allow a substantial balance of dedicated pipelines and general-purpose programmable fabric. High-speed board design must account for controlled-impedance routing, clock integrity, adequate memory bandwidth, and the thermal load created by simultaneous processor and FPGA activity.

🔧

Test and Measurement

The XC7Z035-3FBG676E can serve as the control and processing core of an automated test system where acquisition, pattern generation, and analysis benefit from mixed software and programmable-logic execution. Instrument-control software runs on the dual Cortex-A9 processors, while FPGA fabric handles deterministic sampling, triggering, signal conditioning, or high-throughput capture. The 1 GHz processor rating provides headroom for laboratory automation, while 275,000 logic cells support parallel channels. Designers must define clean power rails, separate sensitive analog and digital return paths, control BGA solder-joint quality, and prevent high-speed switching activity from disturbing measurement accuracy.

✈️

Aerospace and Defense

The XC7Z035-3FBG676E can support aerospace and defense subsystems that require a combination of programmable logic, real-time processing, and extensive high-speed I/O. The dual Arm Cortex-A9 cores can run mission-control software, while FPGA fabric implements data acquisition, navigation, signal-processing, or communication pipelines. The same-footprint XC7Z035-L2FBG676I ordering option is relevant when an industrial temperature-grade configuration is needed, although qualification and procurement requirements must be reviewed separately. Board-level work should include radiation, environmental, and reliability requirements applicable to the complete system rather than relying only on generic SoC specifications.

Ringkasan Produk Disebarkan

XC7Z035-2FBG676E AMD Dipergunakan di: Industrial Machine Vision, Video Processing, Factory Automation, Communications Infrastructure, Test and Measurement XC7Z030-3FBG676E AMD Dipergunakan di: Industrial Machine Vision, Factory Automation, Test and Measurement XC7Z035-L2FBG676I Industrial-temperature-grade same-family alternative with different speed and package suffix Dipergunakan di: Aerospace and Defense XC7Z035-3FFG676E Same-footprint alternative distinguished by its FFG package suffix Dipergunakan di: Aerospace and Defense
What are the key specifications of XC7Z035-3FBG676E that engineers should know?
The XC7Z035-3FBG676E combines 275,000 FPGA logic cells with a dual-core Arm Cortex-A9 processor operating at 1 GHz in a 676-ball FCBGA package. According to the AMD Zynq-7000 documentation, the device uses a 28 nm process and a 1 V supply. Its principal benefit is the ability to place programmable signal processing, interface logic, memory control, and application software in one device.
What is the XC7Z035-3FBG676E and what is a Zynq-7000 SoC?
The XC7Z035-3FBG676E is a programmable Zynq-7000 system-on-chip with ARM processing and Kintex-7 FPGA logic in one package. According to the AMD product description, it contains dual Arm Cortex-A9 MPCore processors, 275,000 logic cells, and CoreSight debug support. The SoC architecture lets software perform control and high-level processing while FPGA fabric accelerates parallel or hardware-specific workloads.
What is the difference between XC7Z035-3FBG676E and XC7Z035-2FBG676E?
The XC7Z035-3FBG676E operates its Arm Cortex-A9 processor at 1 GHz, while the XC7Z035-2FBG676E is listed at 800 MHz. Both use 275,000 logic cells and the same 676-FCBGA package in the manufacturer listing. Choose the -3 part when maximum processor performance is required; the -2 part reduces processor speed by 200 MHz while retaining the same FPGA resource count and package format.
When should I choose XC7Z035-3FBG676E over XC7Z035-2FBG676E?
Choose XC7Z035-3FBG676E when processor throughput or real-time software performance is the primary selection criterion. Its 1 GHz Cortex-A9 frequency is 200 MHz, or 25 percent, higher than the 800 MHz XC7Z035-2FBG676E. The two parts retain 275,000 logic cells and the same 676-FCBGA package, so the decision primarily concerns clock-rate margin rather than board footprint.
What is the best drop-in replacement for XC7Z035-3FBG676E?
The closest same-family drop-in choice is the XC7Z035-2FBG676E because it retains 275,000 logic cells and the 676-FCBGA package, but its processor runs at 800 MHz rather than 1 GHz. Other same-footprint speed-grade variants may support industrial temperature grades or different clock limits. Verify the exact package drawing, exposed-ball requirements, operating-temperature grade, and firmware support before approving a substitution.
Can XC7Z035-3FBG676E replace XC7Z030-3FBG676E?
The XC7Z035-3FBG676E should not be treated as a drop-in replacement for the XC7Z030-3FBG676E because the XC7Z030 has 125,000 logic cells while the XC7Z035 has 275,000. Although both appear in the 676-ball FCBGA family, the XC7Z035 provides 150,000 more logic cells. Verify resource constraints, memory interfaces, power requirements, and pin-level power connectivity before considering either device as a redesign alternative.
Where can I download the XC7Z035-3FBG676E datasheet PDF?
The XC7Z035-3FBG676E datasheet can be downloaded from the AMD documentation page titled Zynq-7000 SoC DC and AC Switching Characteristics. It covers the XC7Z030, XC7Z035, XC7Z045, XC7Z100, and related devices. Use the manufacturer's ball assignment and package documentation together with the datasheet when planning the 676-ball FCBGA layout.
Where can I find the XC7Z035-3FBG676E pinout and package drawing?
The XC7Z035-3FBG676E pinout is identified as a 676-ball square FCBGA with a 27 mm by 27 mm body and a 1 V supply. Use the AMD Zynq-7000 package pinout and BGA layout resources for the exact ball assignments. The public listing confirms the terminal count and body dimensions but does not expose a complete ball-by-ball map on this page, so PCB design must be based on the manufacturer package files.
Is XC7Z035-3FBG676E suitable for industrial machine vision?
Yes, the XC7Z035-3FBG676E is suitable for industrial machine-vision designs that combine image processing with higher-level control. Its 275,000 FPGA logic cells can support parallel pixel pipelines, while the dual 1 GHz Arm Cortex-A9 cores can run camera control, networking, diagnostics, and user applications. The principal constraints are BGA assembly, 1 V power-tree design, thermal planning, and high-speed memory routing.
What power and thermal considerations apply to XC7Z035-3FBG676E?
The XC7Z035-3FBG676E requires a 1 V supply and substantial board-level power planning because it integrates both an FPGA fabric and two processor cores. According to the AMD documentation, the device belongs to the Zynq-7000 SoC family whose DC and AC characteristics define the operating requirements. Follow the manufacturer power-supply sequencing, decoupling, and junction-temperature limits; exact current and thermal-resistance values are not stated in the product listing.
How much processing and programmable logic does XC7Z035-3FBG676E provide?
The XC7Z035-3FBG676E provides 275,000 FPGA logic cells and two Arm Cortex-A9 processor cores capable of operating at 1 GHz. The product listing describes this as a dual-core MPCore configuration with CoreSight debug. This combination is useful for software-controlled systems that also require parallel hardware pipelines, custom I/O interfaces, protocol termination, or real-time data acquisition.
Where can I buy XC7Z035-3FBG676E and what is the current lead time?
Use the Request a Quote form on this page to ask about XC7Z035-3FBG676E availability, current lead time, and order quantity. The exact manufacturer lead time and allocation status are not stated here, so confirm the delivery schedule with XAIPART before committing the schedule. The device is shown as a 676-ball FCBGA in tray shipping form.
What is the price of XC7Z035-3FBG676E?
The current commercial price for XC7Z035-3FBG676E should be obtained through the Request a Quote form on this page because programmable SoC pricing can vary with quantity and market availability. The structured pricing data records a unit reference for this exact MPN, but that value is not repeated in customer-facing technical text. Submit the required quantity and target delivery details to receive a current quotation.
Is XC7Z035-3FBG676E currently in stock?
Current stock should be confirmed through the Request a Quote form on this page. Distributor search results advertise purchasing and shipment for XC7Z035-3FBG676E, but they do not establish a fixed allocation for every order quantity. A quotation response can confirm the available quantity, expected lead time, and whether the requested units are new production stock rather than recovered or obsolete inventory.
What is the best AMD or Xilinx equivalent for XC7Z035-3FBG676E?
The closest validated AMD or Xilinx equivalents are same-family XC7Z035 variants that retain the 676-ball FCBGA footprint, such as XC7Z035-2FBG676E and XC7Z035-3FFG676E. Their differences involve processor speed grade, temperature grade, and package suffix. No cross-manufacturer part can be assumed to be pin-compatible because FPGA ball maps, configuration functions, memory interfaces, and power requirements are device-specific.

Data referensi kejuruteraan untuk XC7Z035-3FBG676E — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose XC7Z035-3FBG676E when the design needs the maximum listed processor frequency of 1 GHz together with the full 275,000-cell FPGA fabric. Choose XC7Z035-2FBG676E when the same logic resources and package are useful but an 800 MHz processor provides adequate performance, resulting in 20 percent less nominal clock frequency. Consider XC7Z035-L2FBG676I only after confirming its speed and temperature requirements for an industrial-oriented configuration. XC7Z035-3FFG676E and other suffix variants can preserve the footprint, but the package identifier, temperature grade, clock rating, power connections, and exact ball map must be checked. Do not use a different Zynq device such as XC7Z030 as a drop-in replacement: its 125,000 logic cells are 150,000 fewer than the target. No cross-manufacturer equivalent should be assumed because programmable-device ball maps and configuration interfaces are vendor-specific.

Perbandingan dengan Gantian

Parametr Produk Ini XC7Z035-2FBG676E XC7Z035-3FFG676E XC7Z035-L2FBG676I XC7Z035-2FFG676I XC7Z035-1FBG676C
Brand AMD AMD AMD AMD AMD AMD
Package 676-FCBGA (27x27) 676-FCBGA (27x27) - same 676-FCBGA (27x27) - same 676-FCBGA (27x27) - same 676-FCBGA (27x27) - same 676-FCBGA (27x27) - same

Penyeberangsung Jelas

  • Higher processor speed than the -2 grade (vsXC7Z035-2FBG676E)
  • Substantially more programmable logic than XC7Z030 (vsXC7Z030-3FBG676E)
  • Dual-core processing for workload partitioning (vsXC7Z035-3FFG676E)

Catatan Desain

Design the XC7Z035-3FBG676E power tree around the manufacturer's 1 V device requirements and the separate supplies used by the Zynq-7000 SoC. Place required bulk and high-frequency decoupling capacitors at their specified power balls, provide low-impedance ground references, and isolate switching regulators from sensitive clock and memory rails. Do not infer current limits or power-sequencing tolerances from general-purpose regulator guidance; use the AMD DC and AC characteristics for the selected XC7Z035 speed grade.

A 676-ball FCBGA requires a multilayer PCB with short escape paths, appropriate via fanout, and controlled-impedance routing for memory and high-speed interfaces. Match the package outline, solder-mask opening, ball pitch, and pad layout to the AMD mechanical drawing rather than relying on the generic 27 mm by 27 mm dimension. Confirm the PCB stackup and fabrication tolerances with the assembler, particularly when using via-in-pad, filled microvias, or thermal-via arrays beneath the device.

Estimate the total power dissipation from the processor and FPGA activity rather than treating the XC7Z035-3FBG676E as a fixed-load component. Place a thermal-via pattern into the PCB beneath the BGA when permitted by the package and assembly process, and use the board's copper area to spread heat away from the solder joints. The manufacturer temperature limits, junction characteristics, and board-dependent thermal resistance must be used to establish the final operating margin.

Route external memory, high-speed I/O, and clock interfaces according to the AMD PCB-design guidance, including matched-length or topology-controlled configurations where specified. Keep configuration and JTAG debug access accessible without disturbing adjacent high-speed pairs. Separate noisy FPGA outputs and switching-supply return currents from processor and memory references, and validate the finished assembly with continuity, impedance, and high-speed signal-integrity measurements.

Do not substitute an XC7Z030, XC7Z045, or another programmable-device family solely because it uses a 676-ball package. Device identifiers, speed grades, temperature grades, power-ball assignments, configuration pins, memory interfaces, and exposed-ball functions must all be checked against the exact MPN. Likewise, a -1, -2, or -3 suffix can alter clock-related characteristics, so it changes the qualification of a drop-in replacement even when the land pattern remains the same.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The exact MPN listing does not provide a definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement. Confirm current environmental and qualification documentation with AMD for the selected ordering code.

Data disahkan pada: 2026-11-14 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

xc7z035 l2fbg676i xc7z035 2ffg676i xc7z035 1ffg676i xc7z035 2ffg900i xc7z035 1fbg676c xc7z035 2fbg676i xc7z035 1fbg676i xc7z035 l2ffg676i xc7z035 1ffg900i xc7z035 3ffg676e XC7Z035-3FBG676E datasheet XC7Z035-3FBG676E pinout XC7Z035-3FBG676E replacement XC7Z035-3FBG676E application circuit AMD XC7Z035-3FBG676E

Komponen dan Tanda berkaitan

AMD XC7Z035-3FBG676E XC7Z035-2FBG676E XC7Z035-3FFG676E XC7Z035-L2FBG676I XC7Z035-2FFG676I XC7Z035-1FBG676C XC7Z035-1FFG676I XC7Z030-3FBG676E Zynq-7000 Kintex-7 FPGA system-on-chip FPGA ARM Cortex-A9 MPCore CoreSight FCBGA-676 BGA package surface-mount 28 nm process 275,000 logic cells industrial machine vision programmable logic high-speed memory RoHS
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ