XC7Z035-3FBG676E - 275K Cell Zynq SoC | AMD | Industrial
Teilenummer: XC7Z035-3FBG676E ✓ AktivXC7Z035-3FBG676E Übersicht
A Zynq-7000 SoC is a heterogeneous programmable device in which an ARM microprocessor subsystem operates alongside FPGA fabric. This device family belongs to the broader FPGA and system-on-chip hierarchy, allowing hardware designers to implement parallel pipelines, custom interfaces, video processing, control logic, and software-driven control functions in a single package rather than combining a separate processor and FPGA.
Key characteristics include 275,000 logic cells, dual ARM Cortex-A9 MPCore processors, CoreSight debug support, and a maximum processor frequency of 1 GHz. The 28 nm implementation supports both hard real-time processing and programmable-logic acceleration. Its 676-ball FCBGA package provides a dense interface for high-speed memory, networking, display, storage, and external data acquisition.
The architecture is particularly useful when an application benefits from combining Linux-capable application processing with deterministic parallel hardware. Software can control the system and manage data movement, while FPGA logic can accelerate filtering, codecs, image processing, protocol handling, or custom interface tasks. Compared with a microcontroller alone, the integrated fabric removes much of the external glue logic normally required for high-throughput data paths.
Typical uses include industrial machine vision, factory automation, networked video processing, test and measurement systems, communications infrastructure, and embedded control platforms. The dual-core processor can partition control software from monitoring or data-processing workloads, while programmable logic interfaces directly to sensors, converters, memories, and high-speed external peripherals.
Board design requires careful attention to power rails, high-speed routing, thermal management, and BGA assembly. Use the AMD pinout, package, and power-guidance documentation to assign power, ground, configuration, and I/O balls. A 676-ball BGA also requires a multilayer PCB with controlled-impedance routing, via-in-pad or via-fanout strategies, and assembly processes capable of handling the package's ball pitch and thermal requirements.
Drop-in-Alternativen für XC7Z035-3FBG676E – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit XC7Z035-3FBG676E (gleiche Bauform und Footprint) – abweichend in Device Type, Architecture, FPGA Logic Cells, Package, Package Type.
XC7Z035-2FBG676E
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XC7Z035-3FFG676E
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
XC7Z035-L2FBG676I
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
XC7Z035-2FFG676I
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →XC7Z035-1FBG676C
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →XC7Z035-1FFG676I
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →XC7Z035-3FBG676E Grenzwerte & elektrische Eigenschaften
| Device Type | Zynq-7000 SoC FPGA with dual-core Arm Cortex-A9 |
| FPGA Logic Cells | 275,000 cells |
| Processor Cores | 2 Arm Cortex-A9 cores |
| Maximum Processor Frequency | 1 GHz |
| Process Technology | 28 nm |
| Package Type | 676-ball FCBGA, 27 mm x 27 mm |
| Terminal Count | 676 balls |
| Versorgungsspannung | 1 V |
| Debug Support | CoreSight |
| Montageart | Surface mount |
| Shipping Form | Tray |
| Device Family | Zynq-7000 |
| FPGA Family | Kintex-7 |
| Architecture | Zynq-7000 SoC first-generation architecture |
| Processor Architecture | ARM Cortex-A9 MPCore |
XC7Z035-3FBG676E 676-ball fcbga, 27 mm x 27 mm Pinbelegungsleitfaden
Pinbelegung für XC7Z035-3FBG676E (676-ball fcbga, 27 mm x 27 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für XC7Z035-3FBG676E.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
XC7Z035-3FBG676E ist geeignet für 6 Anwendungs: Industrial Machine Vision, Video Processing, Factory Automation, Communications Infrastructure, Test and Measurement, Aerospace and Defense.
Industrial Machine Vision
The XC7Z035-3FBG676E fits industrial machine-vision systems that must acquire and process camera data while coordinating sensors and production equipment. Its 275,000 FPGA logic cells can implement parallel pixel pipelines, color conversion, thresholding, and camera-interface logic, while the dual 1 GHz Arm Cortex-A9 cores run higher-level control, diagnostics, and network services. Partitioning acquisition into programmable logic avoids transferring every pixel through the processor. The main engineering constraints are 1 V power-tree design, memory-signal integrity, thermal control, and assembly of the 676-ball FCBGA on a multilayer PCB.
Empfohlen
Video Processing
The XC7Z035-3FBG676E is appropriate for video infrastructure that benefits from combining hardware pipelines with application software. FPGA fabric can handle capture formatting, scaling, filtering, overlay, or interface conversion in parallel, while the dual Cortex-A9 processors manage frame flow, network transmission, and user control. Using 275,000 logic cells provides more parallel capacity than smaller Zynq devices, and the 1 GHz processor rating supports Linux-based control tasks. The design must budget sufficient memory bandwidth and maintain controlled impedance for high-speed video and networking interfaces while controlling package and board temperature.
Empfohlen
Factory Automation
The XC7Z035-3FBG676E supports factory automation controllers that must coordinate motion, safety-adjacent monitoring, communications, and real-time I/O. The ARM subsystem can run control software and protocols, while FPGA logic can implement deterministic timing, encoder processing, or custom sensor acquisition outside the software scheduling path. This separation is useful when deterministic response must remain predictable under a busy operating-system workload. The 676-ball FCBGA demands careful escape-routing and power planning, but it provides the pin density required for parallel buses, high-speed serial links, and multiple external memory interfaces.
Empfohlen
Communications Infrastructure
The XC7Z035-3FBG676E fits communications equipment requiring flexible packet processing, protocol adaptation, and system-level control. Programmable logic can implement narrow functions such as framing, CRC, buffering, or custom serial interfaces, while the dual 1 GHz Arm Cortex-A9 cores support network stacks, telemetry, and management functions. Its 275,000 logic cells allow a substantial balance of dedicated pipelines and general-purpose programmable fabric. High-speed board design must account for controlled-impedance routing, clock integrity, adequate memory bandwidth, and the thermal load created by simultaneous processor and FPGA activity.
Empfohlen
Test and Measurement
The XC7Z035-3FBG676E can serve as the control and processing core of an automated test system where acquisition, pattern generation, and analysis benefit from mixed software and programmable-logic execution. Instrument-control software runs on the dual Cortex-A9 processors, while FPGA fabric handles deterministic sampling, triggering, signal conditioning, or high-throughput capture. The 1 GHz processor rating provides headroom for laboratory automation, while 275,000 logic cells support parallel channels. Designers must define clean power rails, separate sensitive analog and digital return paths, control BGA solder-joint quality, and prevent high-speed switching activity from disturbing measurement accuracy.
Empfohlen
Aerospace and Defense
The XC7Z035-3FBG676E can support aerospace and defense subsystems that require a combination of programmable logic, real-time processing, and extensive high-speed I/O. The dual Arm Cortex-A9 cores can run mission-control software, while FPGA fabric implements data acquisition, navigation, signal-processing, or communication pipelines. The same-footprint XC7Z035-L2FBG676I ordering option is relevant when an industrial temperature-grade configuration is needed, although qualification and procurement requirements must be reviewed separately. Board-level work should include radiation, environmental, and reliability requirements applicable to the complete system rather than relying only on generic SoC specifications.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für XC7Z035-3FBG676E – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | XC7Z035-2FBG676E | XC7Z035-3FFG676E | XC7Z035-L2FBG676I | XC7Z035-2FFG676I | XC7Z035-1FBG676C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-FCBGA (27x27) | 676-FCBGA (27x27) - same | 676-FCBGA (27x27) - same | 676-FCBGA (27x27) - same | 676-FCBGA (27x27) - same | 676-FCBGA (27x27) - same |
Wichtigste Unterscheidungsmerkmale
- Higher processor speed than the -2 grade (vs. XC7Z035-2FBG676E)
- Substantially more programmable logic than XC7Z030 (vs. XC7Z030-3FBG676E)
- Dual-core processing for workload partitioning (vs. XC7Z035-3FFG676E)
Designhinweise
Design the XC7Z035-3FBG676E power tree around the manufacturer's 1 V device requirements and the separate supplies used by the Zynq-7000 SoC. Place required bulk and high-frequency decoupling capacitors at their specified power balls, provide low-impedance ground references, and isolate switching regulators from sensitive clock and memory rails. Do not infer current limits or power-sequencing tolerances from general-purpose regulator guidance; use the AMD DC and AC characteristics for the selected XC7Z035 speed grade.
A 676-ball FCBGA requires a multilayer PCB with short escape paths, appropriate via fanout, and controlled-impedance routing for memory and high-speed interfaces. Match the package outline, solder-mask opening, ball pitch, and pad layout to the AMD mechanical drawing rather than relying on the generic 27 mm by 27 mm dimension. Confirm the PCB stackup and fabrication tolerances with the assembler, particularly when using via-in-pad, filled microvias, or thermal-via arrays beneath the device.
Estimate the total power dissipation from the processor and FPGA activity rather than treating the XC7Z035-3FBG676E as a fixed-load component. Place a thermal-via pattern into the PCB beneath the BGA when permitted by the package and assembly process, and use the board's copper area to spread heat away from the solder joints. The manufacturer temperature limits, junction characteristics, and board-dependent thermal resistance must be used to establish the final operating margin.
Route external memory, high-speed I/O, and clock interfaces according to the AMD PCB-design guidance, including matched-length or topology-controlled configurations where specified. Keep configuration and JTAG debug access accessible without disturbing adjacent high-speed pairs. Separate noisy FPGA outputs and switching-supply return currents from processor and memory references, and validate the finished assembly with continuity, impedance, and high-speed signal-integrity measurements.
Do not substitute an XC7Z030, XC7Z045, or another programmable-device family solely because it uses a 676-ball package. Device identifiers, speed grades, temperature grades, power-ball assignments, configuration pins, memory interfaces, and exposed-ball functions must all be checked against the exact MPN. Likewise, a -1, -2, or -3 suffix can alter clock-related characteristics, so it changes the qualification of a drop-in replacement even when the land pattern remains the same.
Compliance-Informationen
The exact MPN listing does not provide a definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement. Confirm current environmental and qualification documentation with AMD for the selected ordering code.