AMD

XC9536XL-7CSG48I - 36-Macrocell 3.3V CPLD | AMD

MPN: XC9536XL-7CSG48I ✓ Aktif
3.3 V nominal Vdss 48-CSBGA, 7 x 7 mm Package 178.6 MHz Speed
MOQ: 1 |

XC9536XL-7CSG48I Ringkasan

The AMD XC9536XL-7CSG48I is a 3.3 V complex programmable logic device containing 36 macrocells and approximately 800 programmable logic gates in a 48-CSBGA surface-mount package. Its -7 speed designation corresponds to a maximum propagation delay of 7.5 ns, making it suitable for systems requiring deterministic combinational and registered logic in a compact, nonvolatile programmable device.

A CPLD is a user-programmable semiconductor that combines configurable logic and programmable interconnect structures. It belongs to the FPGA and CPLD category, where an FPGA provides broad gate-level programmability and a CPLD provides a more structured macrocell architecture for control logic, decoding, interface bridging, and fixed-function state machines. The XC9536XL family combines repeatable timing, nonvolatile configuration, and in-system programmability without the resource complexity of a large FPGA.

The XC9500XL architecture provides 36 macrocells and 36 I/O positions. The device operates from a 3 V to 3.6 V internal supply and supports at least 10,000 program or erase cycles. The -7 grade provides a 7.5 ns maximum propagation delay, while the -I suffix identifies the industrial temperature option. Its 48-CSBGA package reduces board area compared with leaded packages but requires careful assembly and escape-routing planning because signal access beneath the BGA is constrained.

The XL designation refers to the extended XC9500 architecture, while CSG48 identifies the package family and pin count. This device is useful when the design must be implemented as a compact, deterministic logic block rather than a processor-based solution. In-system programmability allows configuration updates, boot-time personality selection, or field reconfiguration when supported by the surrounding system architecture. The manufacturer datasheet remains the controlling reference for pin assignments, configuration behavior, timing, and absolute electrical limits.

Typical uses include industrial control logic, peripheral address decoding, data-format conversion, bus-interface translation, compact coprocessor logic, legacy protocol handling, and system-boot coordination. The 36-macrocell capacity is particularly appropriate for multiple state machines, latch arrays, and combinational control paths. Designs requiring substantially more parallel logic, block RAM, high-speed transceivers, or soft processors should use a larger programmable-logic device instead.

PCB implementation should prioritize BGA fanout, uninterrupted ground-plane continuity, and short connections to bypass capacitors. Because the 48-CSBGA footprint provides dense underside access, a multilayer board with solid ground planes is generally preferable to a two-layer assembly. Validate assembly capability, solder-paste volume, via-in-pad requirements, and component spacing against the manufacturer package drawing before release.

This product page combines the XC9536XL device characteristics, verified distributor availability, same-package replacement analysis, comparison parameters, and practical implementation guidance. It helps engineers determine whether the XC9536XL-7CSG48I offers the required logic density, timing, voltage, package, and lifecycle fit before beginning a PCB or firmware design.

Pilihan pengganti yang segera untuk XC9536XL-7CSG48I — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera XC9536XL-7CSG48I (sama faktor bentuk dan kaki) — berbeza dalam Package, Architecture, RoHS Status, Temperature Grade, Device Type.

AMD
Architecture: Nonvolatile, in-system programmable CPLD
RoHS Status: Compliant
Temperature Grade: Commercial
Bandingkan Dengan XC9536XL-7CSG48I →
AMD
Package: 48-ball CSBGA
RoHS Status: Non-compliant
Temperature Grade: Commercial
Bandingkan Dengan XC9536XL-7CSG48I →
AMD
Package: 48-pin CSBGA
Device Type: Complex programmable logic device (CPLD)
Bandingkan Dengan XC9536XL-7CSG48I →
AMD
Package: 48-ball CSBGA, 7 mm × 7 mm
Architecture: XC9500 family
RoHS Status: RoHS compliant
Bandingkan Dengan XC9536XL-7CSG48I →

XC9536XL-7CSG48C

✅ Masuk Drop-In
AMD
📦 48-CSBGA (7x7 mm)
Complex programmable logic device (CPLD) · XC9500 family · 36 · 36 · 3.3 V · 7.5 ns · 138.88 MHz · 800 gates

Hubungi untuk harga

Lihat Datasheet →

XC9536XL-7CS48I

✅ Masuk Drop-In
AMD
📦 48-CSBGA (7x7 mm)
Complex programmable logic device (CPLD) · XC9500XL · 3.3 V · 36 macro cells · 800 gates · 125 MHz · 5 ns · 2 function blocks

Hubungi untuk harga

Lihat Datasheet →

XC9536XL-5CSG48C

✅ Masuk Drop-In
AMD
📦 48-CSBGA (7x7 mm)
Complex Programmable Logic Device (CPLD) · 36 macro cells · 34 user I/Os · 3.3 V nominal · 3 V to 3.6 V · 5 ns · 200 MHz · Nonvolatile, in-system programmable CPLD

Hubungi untuk harga

Lihat Datasheet →

XC9536XL-10CSG48C

✅ Masuk Drop-In
📦 48-CSBGA (7x7 mm)
Same 36-macrocell and 3.3 V configuration with a 10 ns speed grade, approximately 33% slower propagation delay than the 7.5 ns target

📋 Alternatif rujukan (tidak dalam katalog)

XC9536XL-7CS48C

✅ Masuk Drop-In
AMD
📦 48-CSBGA (7x7 mm)
Flash-programmable complex programmable logic device · 3.3 V · 125 MHz · 36 macrocells · 36 I/O · 800 gates · 54V18 · 5 ns

Hubungi untuk harga

Lihat Datasheet →

XC9536XL-7CSG48I Penilaian maksimum & Ciri-ciri Elektrik

Product Type Complex Programmable Logic Device (CPLD)
Architecture XC9500XL
Macrocell Count 36 macrocells
Programmable Logic Capacity 800 gates
I/O Count 36 I/O
Maximum Propagation Delay 7.5 ns
Maximum Frequency 178.6 MHz
Internal Supply Voltage 3.3 V nominal
Tegangan Pemberi Arus Operasi 3 V to 3.6 V
Process Technology 0.35 um CMOS
Programmable Elements 2 logic elements per macrocell
Program and Erase Endurance 10,000 cycles minimum
In-System Programmability Supported
Kemasan 48-CSBGA, 7 x 7 mm
Jenis Pemasangan Surface Mount
Temperature Grade Industrial

Panduan Konfigurasi Pin XC9536XL-7CSG48I 48-csbga, 7 x 7 mm

Konfigurasi pin untuk XC9536XL-7CSG48I (48-csbga, 7 x 7 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 48-csbga, 7 x 7 mm untuk XC9536XL-7CSG48I

Tiada data garisan pin yang diperoleh untuk XC9536XL-7CSG48I.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

XC9536XL-7CSG48I patut untuk 6 aplikasis: Industrial Control and Sequencing Logic, Peripheral Address Decoding, Legacy Bus Interface Translation, Data Format Conversion, System Boot and Configuration Control, Instrumentation and Test Logic.

🏭

Industrial Control and Sequencing Logic

The XC9536XL-7CSG48I fits compact industrial controllers that require deterministic state machines, interlocks, and command sequencing without a processor. Its 36 macrocells provide room for multiple parallel control paths, while the 7.5 ns maximum propagation delay supports predictable combinational decisions. The industrial -I ordering option is appropriate when ambient conditions exceed the commercial envelope. Place the CPLD near the controlled interfaces, preserve uninterrupted ground planes beneath the BGA, and use the manufacturer timing report to establish setup and hold requirements for attached sensors, actuators, and safety-related interlocks.

🔧

Peripheral Address Decoding

The XC9536XL-7CSG48I can implement deterministic peripheral address decoding, register selection, chip-enable generation, and bus-cycle qualification. Thirty-six macrocells allow decoding logic to be combined with small state machines rather than splitting one function across multiple devices. The 178.6 MHz listed maximum-frequency figure and 7.5 ns propagation delay provide useful timing margin for synchronous control logic. Engineers should define propagation requirements for every decoded address and qualify the design against the worst-case timing conditions in the AMD datasheet rather than relying only on the nominal frequency figure.

🔧

Legacy Bus Interface Translation

The XC9536XL-7CSG48I is suitable for translating or coordinating legacy bus signals when the required logic is mainly combinatorial or uses a small number of registered state machines. The 36 available I/O positions can support parallel data, address, and control paths within a single 48-CSBGA device. Designers should partition inputs according to voltage and timing constraints, account for I/O enable behavior, and verify all setup, hold, and transition limits against the manufacturer electrical specification. A multilayer PCB is preferable because it provides continuous plane references while preserving the escape-routing needed for the fine-pitch BGA.

⚡

Data Format Conversion

The XC9536XL-7CSG48I can implement parallel-to-serial formatting, byte alignment, bit-field rearrangement, and protocol pre-processing where deterministic hardware behavior is important. Its approximately 800-gate capacity is enough for multiple conversion paths and associated control states, reducing reliance on microcontroller firmware. The 7.5 ns maximum propagation delay must be evaluated against the input clock period and output skew budget. For high-speed interfaces, use registered I/O paths where required and validate timing with realistic board-level assumptions rather than treating device propagation delay as the complete system timing budget.

🖥️

System Boot and Configuration Control

The XC9536XL-7CSG48I can coordinate power sequencing, reset generation, mode selection, and peripheral enables during system startup. Because it supports in-system programmability, the same device can also serve as a compact platform controller that manages configuration updates and boot personality selection. Design the programming interface for electrical compatibility and add appropriate write-protection or recovery behavior for critical systems. The configuration data must remain stable according to the manufacturer's power-up and programming requirements, while decoupling and BGA power-ball connections must be designed to prevent unintended resets during supply ramp-up.

🔧

Instrumentation and Test Logic

The XC9536XL-7CSG48I is useful in instrumentation and test systems for pattern generation, trigger coordination, channel gating, and measurement sequencing. The compact 36-macrocell implementation can consolidate control functions that would otherwise occupy multiple discrete logic devices. Its deterministic 7.5 ns maximum propagation delay helps define trigger relationships, although external propagation delay, connector loading, and clock skew must be included in the end-to-end timing budget. Use short, impedance-controlled routes for sensitive timing signals and maintain a continuous reference plane to minimize coupling between the CPLD, test connectors, and adjacent analog circuitry.

What is the AMD XC9536XL-7CSG48I?
The AMD XC9536XL-7CSG48I is a 36-macrocell CPLD based on the XC9500XL architecture, with approximately 800 programmable gates and a 7.5 ns maximum propagation delay. It operates from a 3 V to 3.6 V internal supply and is packaged in a 48-CSBGA surface-mount configuration. The AMD datasheet identifies the device as a 3.3 V, 36-macrocell complex programmable logic device.
What are the key specifications of XC9536XL-7CSG48I?
The XC9536XL-7CSG48I provides 36 macrocells, 36 I/O positions, 800 programmable gates, a 7.5 ns maximum propagation delay, and a 178.6 MHz maximum-frequency figure in the device listing. Its internal supply range is 3 V to 3.6 V, and it uses 0.35 um CMOS technology. According to the AMD device documentation, each macrocell contains two programmable logic elements and supports at least 10,000 program or erase cycles.
Where can I download the XC9536XL-7CSG48I datasheet and pinout?
The XC9536XL-7CSG48I datasheet and pinout information are available through the linked datasheet document page, while the manufacturer package drawing defines the complete 48-CSBGA land pattern. The AMD datasheet should be used to assign every power, ground, configuration, clock, and I/O connection. Because this dense BGA has 48 positions and no public pin table is reproduced on this page, use the package drawing and device datasheet together before releasing a PCB layout.
Is the XC9536XL-7CSG48I a 3.3 V CPLD with 36 macrocells?
Yes, the XC9536XL-7CSG48I is a nominal 3.3 V CPLD with 36 macrocells and an operating internal supply range of 3 V to 3.6 V. The device is part of the XC9500XL family and offers approximately 800 programmable gates with a -7 speed grade corresponding to 7.5 ns maximum propagation delay. The AMD datasheet remains the authoritative source for electrical limits and timing conditions.
What can replace the XC9536XL-7CSG48I?
The XC9536XL-7CSG48C is the closest same-package replacement identified for the XC9536XL-7CSG48I, with the same 36-macrocell XC9500XL architecture, 3.3 V supply class, 48-CSBGA footprint, and 7.5 ns speed grade. The principal distinction is the temperature suffix: the target carries the -I industrial designation, while the -C option carries the commercial designation. Confirm temperature limits, ordering codes, and qualification requirements before substitution.
Is XC9536XL-7CSG48C the same as XC9536XL-7CSG48I?
The XC9536XL-7CSG48C and XC9536XL-7CSG48I share the same -7 speed grade, 36-macrocell XC9500XL architecture, 3.3 V supply class, and 48-CSBGA format. Their meaningful ordering difference is temperature grade: -I denotes the industrial option and -C denotes the commercial option. A mechanical drop-in decision is therefore straightforward, but the operating-temperature envelope must match the target system requirements.
When should I choose XC9536XL-7CSG48I over XC9536XL-7CSG48C?
Choose the XC9536XL-7CSG48I when the assembly must satisfy the industrial temperature grade, while retaining the same 36-macrocell density, 7.5 ns speed grade, and 48-CSBGA footprint as the XC9536XL-7CSG48C. Choose the -C version when the product operates entirely within the commercial temperature envelope and cost or availability favors that ordering option. Review the exact temperature limits in the AMD datasheet before either choice.
What is the best AMD equivalent for XC9536XL-7CSG48I?
The best same-footprint AMD option identified is the XC9536XL-7CSG48C because it preserves the 7.5 ns speed grade, 36-macrocell density, 3.3 V operating class, and 48-CSBGA package. The XC9536XL-7CS48I offers another same-speed family option whose temperature-grade and package-code details should be checked against the original ordering code. No cross-manufacturer drop-in replacement with verified pin compatibility was identified.
Where can I buy XC9536XL-7CSG48I online?
Use the Request a Quote form on this page to request availability, order quantities, and a current quotation for the exact XC9536XL-7CSG48I ordering code. The requested part is a 36-macrocell, 3.3 V CPLD in a 48-CSBGA package, so the quote should explicitly identify the -7 speed grade and -I industrial suffix. This avoids confusion with the closely related XC9536XL-7CS48I and XC9536XL-7CSG48C variants.
What is the price of XC9536XL-7CSG48I?
The current unit price for XC9536XL-7CSG48I should be requested through the Request a Quote form on this page. The quotation request should state the exact MPN, required quantity, and whether reels, trays, or another authorized delivery format are needed. The device is listed by multiple distribution channels, but exact grade, package, and delivery configuration determine the commercial outcome.
Is XC9536XL-7CSG48I in stock and what is its lead time?
Current stock, minimum order quantity, and lead time for XC9536XL-7CSG48I should be confirmed through the Request a Quote form on this page. A distributor listing identifies the part as available, but inventory levels can change independently of the product lifecycle state. Include your required date, production quantity, and packaging preference in the request to obtain an actionable schedule.
How does XC9536XL-7CSG48I compare with XC9536XL-10CSG48C?
The XC9536XL-7CSG48I is the faster -7 grade, with a listed maximum propagation delay of 7.5 ns and maximum frequency of 178.6 MHz, while the XC9536XL-10CSG48C is the -10 grade. Both belong to the 36-macrocell XC9500XL family and use the 48-CSBGA package class, but the target offers tighter timing. The -10 option may suit less demanding paths, although its speed difference is approximately 33% in propagation delay.
Can XC9536XL-7CSG48I control an industrial system?
The XC9536XL-7CSG48I is suitable for industrial control applications when the complete circuit also meets its specified operating limits. The -I suffix denotes the industrial temperature option, and the device provides 36 macrocells with a 7.5 ns maximum propagation delay for deterministic control logic. Industrial suitability also depends on the power supply, enclosure temperature, system reliability requirements, and the use of an appropriate AMD programming and configuration method.
Does the XC9536XL-7CSG48I support in-system programming?
Yes, the XC9536XL-7CSG48I supports in-system programmability, allowing configuration to be updated through the device's programming interface without removing it from the assembled board. The device documentation also specifies at least 10,000 program or erase cycles. Design the JTAG or configuration interface, voltage levels, access timing, and system safety behavior according to the manufacturer programming guidance.
What package and PCB considerations apply to XC9536XL-7CSG48I?
The XC9536XL-7CSG48I uses a 48-CSBGA package measuring 7 x 7 mm, so the PCB must support fine-pitch BGA assembly and controlled escape routing. Use continuous ground and power planes, place decoupling close to the relevant power balls, and validate via-in-pad or filled-via construction against the package assembly requirements. The exact land pattern, solder-mask definition, and recommended footprint should be taken from the AMD package drawing.

Data referensi kejuruteraan untuk XC9536XL-7CSG48I — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the XC9536XL-7CSG48I when the product needs an industrial-temperature 3.3 V CPLD with 36 macrocells, approximately 800 gates, and a 7.5 ns maximum propagation delay in a 48-CSBGA package. The XC9536XL-7CSG48C is the closest same-speed option for commercial-temperature environments, but its temperature grade must satisfy the product specification. The XC9536XL-7CS48I provides a related package-code alternative for industrial use, subject to verifying that the complete ball map and ordering information match. Consider the XC9536XL-5CSG48C when additional timing margin is valuable and the commercial-grade temperature envelope is acceptable. Use the XC9536XL-10CSG48C only when its 10 ns propagation delay still satisfies every timing path. Because all options are architecturally similar, final selection should prioritize temperature grade, exact package code, pin mapping, qualification, lifecycle availability, and verified timing rather than speed alone.

Perbandingan dengan Gantian

Parametr Produk Ini XC9536XL-7CSG48C XC9536XL-7CS48I XC9536XL-5CSG48C XC9536XL-10CSG48C XC9536XL-7CS48C
Brand AMD AMD AMD AMD AMD AMD
Package 48-CSBGA (7x7 mm) 48-CSBGA (7x7 mm) 48-CSBGA (7x7 mm) 48-CSBGA (7x7 mm) 48-CSBGA (7x7 mm) 48-CSBGA (7x7 mm)
Architecture XC9500XL XC9500XL XC9500XL XC9500XL XC9500XL XC9500XL
Macrocell Count 36 macrocells 36 macrocells 36 macrocells 36 macrocells 36 macrocells 36 macrocells
Programmable Gate Capacity 800 gates 800 gates 800 gates 800 gates 800 gates 800 gates
Maximum Propagation Delay 7.5 ns 7.5 ns 7.5 ns 5 ns 10 ns 7.5 ns
Internal Supply Voltage 3.3 V nominal; 3 V to 3.6 V operating range 3.3 V nominal; 3 V to 3.6 V operating range 3.3 V nominal; 3 V to 3.6 V operating range 3.3 V nominal; 3 V to 3.6 V operating range 3.3 V nominal; 3 V to 3.6 V operating range 3.3 V nominal; 3 V to 3.6 V operating range
Temperature Grade Industrial Commercial Industrial Commercial Commercial Commercial

Penyeberangsung Jelas

  • Faster timing grade than the XC9536XL-10CSG48C option (vsXC9536XL-10CSG48C)
  • Industrial-temperature ordering option (vsXC9536XL-7CSG48C)
  • More timing margin than the 10 ns family option (vsXC9536XL-10CSG48C)
  • Lower device propagation delay than the slower family variant (vsXC9536XL-10CSG48C)

Catatan Desain

Design the 48-CSBGA footprint directly from the manufacturer package drawing rather than approximating it from a generic BGA library. Confirm ball pitch, pad diameter, solder-mask opening, component orientation, and whether an exposed thermal or configuration-related ball is present. Escape-routing should use vias immediately outside the BGA where practical, while preserving access to every power and ground ball. Because no complete public pin list is reproduced on this page, cross-check the PCB netlist against the pin-description table in the AMD datasheet before fabrication.

Route the 3.3 V supply and ground networks on dedicated layers with short, low-impedance paths to the appropriate BGA balls. Place the manufacturer's recommended local bypass capacitors adjacent to the device, and account for capacitor effective capacitance and DC-bias derating at 3.3 V. Avoid splitting a ground ball connection with narrow traces merely to gain routing space; a multilayer stackup with uninterrupted ground planes is generally more effective for a dense BGA carrying clocked or high-switching-rate I/O.

Use the -7 grade only after completing worst-case timing analysis. A 7.5 ns maximum propagation delay describes device timing under specified conditions; it does not include clock skew, routing delay, connector delay, or external driver loading. Constrain clocks and high-speed I/O, use short point-to-point routes where possible, and avoid crossing plane splits. For replacement with XC9536XL-10CSG48C, recalculate every timing path because the propagation delay increases by approximately 33% from 7.5 ns to 10 ns.

Do not treat the closely related XC9536XL-7CS48I, XC9536XL-7CSG48C, and XC9536XL-7CS48C as identical ordering codes. Compare the speed suffix, package code, temperature suffix, pin description, and qualification requirements as one complete configuration. A PCB footprint match alone does not establish functional equivalence if the commercial-temperature option cannot meet the product's ambient requirements or if a package code changes a ball assignment. Record the full approved manufacturer part number in the schematic, BOM, and production-test documentation.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this ordering code. The industrial -I suffix identifies a temperature grade, not automotive qualification.

Data disahkan pada: 2026-11-16 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

xc9536xl datasheet xc9536xl pinout xc9536xl 10vqg44c xc9536xl 10vqg44i xc9536xl 7vqg44c XC9536XL-7CSG48I datasheet XC9536XL-7CSG48I pinout XC9536XL-7CSG48I replacement XC9536XL-7CSG48I equivalent XC9536XL-7CSG48I vs XC9536XL-10CSG48C XC9536XL-7CSG48I 48-CSBGA footprint AMD XC9536XL-7CSG48I XC9536XL-7CSG48I price XC9536XL-7CSG48I stock

Komponen dan Tanda berkaitan

AMD XC9536XL-7CSG48I XC9536XL-7CSG48C XC9536XL-7CS48I XC9536XL-5CSG48C XC9536XL-10CSG48C XC9536XL-7CS48C XC9500XL architecture CPLD Complex Programmable Logic Device FPGA Field-Programmable Gate Array Programmable logic Macrocell Nonvolatile configuration In-system programmability 3.3 V CMOS 0.35 um process 7.5 ns propagation delay 178.6 MHz maximum frequency 48-CSBGA 7 x 7 mm BGA package Surface mount Industrial temperature grade RoHS REACH
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ