AMD

XC9572XL-7VQG44C 72-Macrocell CPLD, 5 ns, 44 VQFP | AMD

MPN: XC9572XL-7VQG44C ✗ Akhir Hayat
3.3 V Vdss 44-pin VQFP Package 178 MHz Speed
MOQ: 1 |

XC9572XL-7VQG44C Ringkasan

AMD XC9572XL-7VQG44C is a 3.3 V high-performance CPLD with 72 macrocells, 34 user I/O pins, and a 5 ns pin-to-pin logic delay in a 44-pin VQFP package. The device provides approximately 1,600 usable gates and supports system frequencies up to 178 MHz. Its -7 speed designation identifies the 5 ns performance class, while the G suffix identifies the industrial-temperature ordering option.

A CPLD, or complex programmable logic device, is a user-programmable semiconductor that combines non-volatile configuration memory with interconnected logic arrays. In the product hierarchy, a CPLD belongs to programmable logic devices alongside FPGAs and other logic devices. It sits below a microcontroller in general-purpose processing capability, but offers deterministic hardware logic that continues operating without software execution. The XC9500XL architecture is intended for compact control, interface, decoding, and glue-logic designs.

Key features of the XC9572XL-7VQG44C include four 54V18 function blocks, 72 macrocells, 1,600 usable gates, 34 user I/O pins, 5 ns pin-to-pin logic delays, and operation from a 3.3 V core supply. The 44-pin VQFP format supports a compact surface-mount implementation, while the -7 grade favors timing performance over the slower -10 variant. Non-volatile configuration storage allows the programmed logic design to remain available after power is removed.

The XC9500XL architecture is optimized for high-performance communications and computing systems. Each macrocell provides programmable combinational and registered logic, allowing control signals, state machines, bus decoding, protocol interfaces, and data-routing functions to be consolidated into one programmable device. The family provides substantially more logic capacity than basic GAL-type devices while maintaining a comparatively simple programming workflow and a modest 72-macrocell footprint.

Typical uses include industrial control interfaces, communications equipment, test and measurement systems, peripheral controllers, legacy bus interface logic, and embedded system support functions. A design can use the 34 available I/O pins for external data buses, control signals, status indicators, and clocked interfaces. The 178 MHz system-frequency figure describes the supported logic performance class, while the 5 ns pin-to-pin delay provides the more useful timing target for many board-level designs.

Designers should verify signal-integrity and timing requirements against the manufacturer data sheet, especially for high-speed outputs, external memory interfaces, and fanout-sensitive nets. The 44-pin surface-mount package also requires careful PCB footprint and thermal assessment. Because this device uses an established programmable-logic family, existing designs may require Xilinx or AMD ISE-compatible project files and supported programming hardware.

This product record combines the manufacturer data sheet with focused engineering guidance, package information, lifecycle context, and pin-compatible alternatives. It also highlights the timing, I/O, and capacity differences that matter when replacing a CPLD without changing the PCB footprint.

Pilihan pengganti yang segera untuk XC9572XL-7VQG44C — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera XC9572XL-7VQG44C (sama faktor bentuk dan kaki) — berbeza dalam Package, Product Type, Usable Gates.

AMD
Package: VQFP-44
Product Type: Complex Programmable Logic Device (CPLD)
Usable Gates: 1,600 gates
Bandingkan Dengan XC9572XL-7VQG44C →

XC9572XL-10VQG44C

✅ Masuk Drop-In
📦 VQFP-44
Same XC9572XL architecture and VQFP-44 footprint, but the -10 speed grade is slower than the target -7 grade; the documented pin-to-pin delay class differs by 2.5 ns.

📋 Alternatif rujukan (tidak dalam katalog)

XC9572XL-5VQG44C

✅ Masuk Drop-In
📦 VQFP-44
Same XC9572XL architecture and VQFP-44 footprint, but the -5 speed grade is faster than the target -7 grade; the documented pin-to-pin delay class differs by 2 ns.

📋 Alternatif rujukan (tidak dalam katalog)

XC9572XL-10VQG44I

✅ Masuk Drop-In
📦 VQFP-44
Same XC9572XL architecture and VQFP-44 footprint with a slower -10 speed grade and an industrial-temperature I suffix instead of the target -7 commercial C suffix.

📋 Alternatif rujukan (tidak dalam katalog)

XC9572XL-7VQG44I

✅ Masuk Drop-In
📦 VQFP-44
Same XC9572XL architecture, -7 speed class, and VQFP-44 footprint; the I suffix changes the temperature grade from commercial C to industrial.

📋 Alternatif rujukan (tidak dalam katalog)

XC9572XL-7VQG44C Penilaian maksimum & Ciri-ciri Elektrik

Product Type High-performance CPLD
Device Family XC9500XL
Core Supply Voltage 3.3 V
Macrocells 72 macrocells
Usable Gates 1,600 usable gates
Function Blocks 4 function blocks
Function Block Architecture 54V18
User I/O Pins 34 user I/O pins
Pin-to-Pin Logic Delay 5 ns
Maximum System Frequency 178 MHz
Kemasan 44-pin VQFP
Speed Grade -7
Temperature Grade Industrial grade
Jenis Pemasangan Surface mount
Configuration Technology Non-volatile configuration memory
Process Technology 0.35 um CMOS

Panduan Konfigurasi Pin XC9572XL-7VQG44C 44-pin vqfp

Konfigurasi pin untuk XC9572XL-7VQG44C (44-pin vqfp pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 44-pin vqfp untuk XC9572XL-7VQG44C

Tiada data garisan pin yang diperoleh untuk XC9572XL-7VQG44C.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

XC9572XL-7VQG44C patut untuk 6 aplikasis: Communications Protocol Interfaces, Industrial Control Logic, Test and Measurement Systems, Legacy Bus Interface Bridges, Embedded Peripheral Controllers, Peripheral and Storage Support Logic.

🌐

Communications Protocol Interfaces

The XC9572XL-7VQG44C suits communications equipment requiring deterministic protocol framing, command decoding, and interface control without a processor performing every I/O operation. Its four 54V18 function blocks provide 72 macrocells and 1,600 usable gates, while the 5 ns pin-to-pin delay supplies useful timing margin for registered state-machine logic. Thirty-four user I/O pins can support data, clock, chip-select, and handshake signals. The 3.3 V architecture aligns with modern low-voltage communications logic, although external line drivers or level translators may still be required for physical interfaces.

🏭

Industrial Control Logic

The XC9572XL-7VQG44C is appropriate for compact industrial controllers that combine sequencing, interlocks, status decoding, and peripheral control in programmable hardware. The 72-macrocell capacity can consolidate multiple small state machines, and the -7 speed grade provides a 5 ns pin-to-pin logic delay for faster control paths. Thirty-four user I/O pins support sensors, actuator commands, and machine-status signals at suitable logic levels. For industrial deployment, verify the exact operating-temperature limits, isolation requirements, and safety controls beyond the CPLD itself.

⚡

Test and Measurement Systems

A CPLD is useful in test and measurement equipment for trigger sequencing, instrument-control decoding, status aggregation, and deterministic timing generation. The XC9572XL-7VQG44C combines 34 user I/O pins with a 5 ns logic delay, allowing several control functions to be implemented in one programmable device without relying on continuous software servicing. Its non-volatile configuration also preserves the control design across power cycles. Engineers should use the data-sheet timing specifications to establish setup, hold, clock, and output-loading margins for precision trigger paths.

🖥️

Legacy Bus Interface Bridges

The XC9572XL-7VQG44C can bridge or adapt older parallel buses where a compact, non-volatile controller is preferable to a larger processor subsystem. Its macrocell resources support address decoding, read and write sequencing, arbitration, and data-path gating, while 34 user I/O pins can accommodate address, control, and a portion of the data bus. The 5 ns delay class helps preserve timing margin in synchronous control paths. Final implementation requires careful analysis of bus direction changes, contention, termination, and every device’s setup and hold timing.

🧩

Embedded Peripheral Controllers

The XC9572XL-7VQG44C can act as a dedicated peripheral controller in an embedded system, implementing command sequencing, interrupt logic, display multiplexing, keypad scanning, or I/O expansion independently of the main processor. Its four function blocks and 72 macrocells allow related logic sections to be mapped without a large FPGA, while the 34 I/O pins provide connections to external devices. The -7 grade offers stronger timing margin than the -10 option. The programmer and JTAG programming chain must remain supported by the selected AMD or Xilinx ISE workflow.

🖥️

Peripheral and Storage Support Logic

The XC9572XL-7VQG44C is suitable for auxiliary logic around processors, storage controllers, and peripheral chips where local decoding and sequencing must operate predictably. Programmable macrocells can implement command qualification, FIFO-handshake control, interrupt masking, and address decoding, reducing dependence on host software for time-critical tasks. The 44-pin VQFP footprint supports compact board layouts, and the 3.3 V core supply integrates with compatible logic. Designers should confirm output-current limits, bus contention behavior, and storage-interface timing against the relevant device data sheets.

Ringkasan Produk Disebarkan

XC9572XL-10VQG44C same-footprint family option for lower-speed protocol-control designs Dipergunakan di: Communications Protocol Interfaces, Legacy Bus Interface Bridges, Peripheral and Storage Support Logic XC9572XL-5VQG44C same-footprint family option with a faster speed class Dipergunakan di: Communications Protocol Interfaces, Test and Measurement Systems, Embedded Peripheral Controllers XC9572XL-7VQG44I same-footprint industrial-temperature ordering option Dipergunakan di: Industrial Control Logic, Test and Measurement Systems, Embedded Peripheral Controllers XC9572XL-10VQG44I industrial-temperature family option for less timing-critical logic Dipergunakan di: Industrial Control Logic, Legacy Bus Interface Bridges, Peripheral and Storage Support Logic
What is the AMD XC9572XL-7VQG44C?
The AMD XC9572XL-7VQG44C is a 3.3 V high-performance CPLD containing 72 macrocells, 1,600 usable gates, and 34 user I/O pins in a 44-pin VQFP package. According to the AMD XC9572XL data sheet DS057, it provides four 54V18 function blocks, a 5 ns pin-to-pin logic delay, and operation up to a 178 MHz system frequency. It is intended for deterministic communications, computing, control, and interface logic where a compact, non-volatile programmable-logic device is required.
Where can I download the XC9572XL-7VQG44C datasheet PDF?
The official XC9572XL-7VQG44C datasheet is available through the AMD documentation page for DS057, titled “XC9572XL High-Performance CPLD Data Sheet.” The page identifies document DS057, release date 2006-03-21, and revision 1.9. Use that manufacturer document for pin definitions, electrical characteristics, timing tables, package drawings, and the architecture description. The Request a Quote form on this page can also be used to request documentation or procurement support for the exact ordering code.
Where can I find the XC9572XL pinout?
The XC9572XL pinout is presented in the pin-configuration and package sections of AMD data sheet DS057 for the 44-pin VQFP option. Use the manufacturer diagram when assigning signals because the VQFP has 34 user I/O pins plus package power and ground connections. The complete pin list is not reproduced on this product page to avoid transcription errors. Before routing a PCB, confirm every signal name, power direction, and no-connect designation against the official data sheet for the XC9572XL-7VQG44C ordering code.
What are the key specifications of XC9572XL-7VQG44C that engineers should know?
The XC9572XL-7VQG44C provides 72 macrocells, 1,600 usable gates, four 54V18 function blocks, 34 user I/O pins, and a 3.3 V core supply in a 44-pin VQFP package. The -7 speed grade delivers a 5 ns pin-to-pin logic delay, and the family is specified for system frequencies up to 178 MHz. AMD data sheet DS057 also identifies the device as an XC9500XL-family high-performance CPLD designed for low-voltage communications and computing systems.
How do I program an XC9572XL-7VQG44C CPLD?
The XC9572XL-7VQG44C is programmed through a compatible Xilinx or AMD ISE design flow and an appropriate JTAG programming cable. The engineer creates or opens the CPLD project, assigns the device and package, performs synthesis and implementation, generates the programming file, and downloads it through JTAG. Because this is an established legacy device, the installed ISE version and programmer driver must support the XC9500XL family. Confirm the exact device name, package, and speed grade in the implementation constraints.
Is XC9572XL-7VQG44C suitable for communications equipment?
Yes, the XC9572XL-7VQG44C is suitable for many communications-control and interface functions because it offers 72 macrocells, 34 user I/O pins, a 5 ns logic delay, and operation up to 178 MHz. AMD describes the XC9500XL family as targeting high-performance, low-voltage applications in communications and computing systems. It is especially appropriate for protocol state machines, bus decoding, control logic, and interface bridges where non-volatile programmable hardware is preferable to software-controlled I/O.
XC9572XL-7VQG44C vs XC9572XL-10VQG44C — which is better for timing-sensitive designs?
The XC9572XL-7VQG44C is the better choice when timing margin is more important than minimizing cost because it is the faster -7 grade with a 5 ns pin-to-pin logic delay. The XC9572XL-10VQG44C belongs to the slower -10 performance class, so it offers less timing margin for the same external loading and architecture. Both use the same XC9572XL device organization and 44-pin VQFP format, but the final decision should be based on the complete AMD timing tables and system requirements.
What is the difference between XC9572XL-7VQG44C and XC9572XL-5VQG44C?
The primary documented difference is speed grade: the XC9572XL-7VQG44C is specified at 5 ns pin-to-pin logic delay, while the XC9572XL-5VQG44C belongs to the faster -5 class. Both retain the XC9572XL 72-macrocell architecture and 44-pin VQFP package in their respective ordering codes. The -5 option may improve timing margin, but it is normally selected when operating conditions, grade availability, or system timing justify the higher-performance device. Confirm compatibility with the intended ISE project and programmer.
When should I choose XC9572XL-7VQG44C over XC9572XL-10VQG44C?
Choose the XC9572XL-7VQG44C when a design needs more timing margin than the -10 grade provides while retaining the 44-pin VQFP footprint. Its 5 ns pin-to-pin logic delay can simplify clocking and interface timing compared with the slower -10 class. Choose XC9572XL-10VQG44C instead when the lower-performance grade meets the design and availability requirements. In either case, verify external setup and hold timing, output loading, and the complete board-level timing budget.
Is XC9572XL-7VQG44C suitable for industrial control systems?
The XC9572XL-7VQG44C carries the G industrial-temperature designation and is suitable for industrial control tasks when its specified operating limits satisfy the system requirement. Its 72 macrocells and 34 user I/O pins support state machines, interface control, signal conditioning, and peripheral logic, while the 5 ns delay supports timing-critical control paths. Use DS057 to confirm operating-temperature limits, supply tolerances, and absolute maximum ratings for the exact device, then account for derating at elevated ambient temperatures.
What can replace XC9572XL-7VQG44C without changing the PCB footprint?
The closest same-family drop-in candidates are XC9572XL-10VQG44C, XC9572XL-5VQG44C, XC9572XL-10VQG44I, and XC9572XL-7VQG44I because each retains the XC9572XL device architecture and 44-pin VQFP format. Their speed and temperature qualifiers differ, so replacement requires checking timing, temperature requirements, programming-file compatibility, and availability. The XC9536XL has a different macrocell count and is therefore not treated as a parameterically equivalent drop-in replacement.
Can XC9572XL-7VQG44I replace XC9572XL-7VQG44C?
Yes, XC9572XL-7VQG44I is the closest speed-matched drop-in candidate because it retains the -7 performance class, 72-macrocell architecture, 34 user I/O pins, and 44-pin VQFP package. The I suffix denotes the industrial-temperature ordering option, while C denotes commercial temperature. Check the required commercial or industrial temperature range, pin definitions, and programming configuration before substituting the parts in a deployed design.
What is the best AMD equivalent for XC9572XL-7VQG44C?
Among AMD/Xilinx devices identified for this footprint, XC9572XL-10VQG44C is the most direct lower-speed alternative, while XC9572XL-5VQG44C provides a faster speed class. Both preserve the XC9572XL architecture and 44-pin VQFP format, making them suitable for footprint-compatible replacement when their timing and operating requirements meet the design. No clearly equivalent cross-brand CPLD was established with sufficient pin-level and parameter evidence, so an alternative from another manufacturer is not recommended.
Can an XC9536XL-7VQG44C replace XC9572XL-7VQG44C?
The XC9536XL-7VQG44C should not be treated as a direct drop-in replacement for the XC9572XL-7VQG44C because its architecture and logic capacity differ. The XC9572XL contains 72 macrocells, whereas the XC9536XL is a smaller member of the XC9500XL family, so the devices do not maintain comparable key parameter proximity. It may be useful for a redesigned board with lower logic demand, but it is not a footprint-compatible substitute for the original design.
Where to buy XC9572XL-7VQG44C online and what is the lead time?
Use the Request a Quote form on this page to request the exact AMD XC9572XL-7VQG44C ordering code, current commercial terms, and a lead-time commitment. The form allows you to specify quantity, target date, and packaging needs without relying on a stale public listing. Stock status can change by lot and date, so the manufacturer or an authorized supply channel should confirm availability for the exact MPN before production planning. The same form supports price, minimum-order, and obsolete-material questions.
What is the price of XC9572XL-7VQG44C and is it in stock?
The Request a Quote form on this page provides the current price and availability response for the exact XC9572XL-7VQG44C MPN. Because pricing and stock are time-sensitive, no static amount or in-stock claim should be used for production commitments. Include your required quantity, date code preference, and shipment destination in the request. The form also allows you to ask about multiples, partial sourcing, and legacy inventory when the standard supply route is constrained.

Data referensi kejuruteraan untuk XC9572XL-7VQG44C — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the XC9572XL-7VQG44C when a design needs a 72-macrocell CPLD in a 44-pin VQFP package, a 5 ns pin-to-pin logic delay, and commercial-temperature operation. Select XC9572XL-10VQG44C when the slower -10 class still meets timing and cost or availability requirements; it preserves the same family architecture and footprint but reduces timing margin. Select XC9572XL-5VQG44C when a faster -5 class is desired for tighter timing. Use XC9572XL-7VQG44I or XC9572XL-10VQG44I for industrial-temperature requirements, selecting -7 or -10 according to the timing budget. Always verify the manufacturer pin configuration, device constraints, programming-file support, and supplier availability before replacing the original part.

Perbandingan dengan Gantian

Parametr Produk Ini XC9572XL-10VQG44C XC9572XL-5VQG44C XC9572XL-10VQG44I XC9572XL-7VQG44I
Brand AMD AMD AMD AMD AMD
Package VQFP-44 VQFP-44 - same VQFP-44 - same VQFP-44 - same VQFP-44 - same
Device Architecture XC9572XL XC9572XL XC9572XL XC9572XL XC9572XL
Macrocells 72 macrocells 72 macrocells 72 macrocells 72 macrocells 72 macrocells
Usable Gates 1,600 usable gates 1,600 usable gates 1,600 usable gates 1,600 usable gates 1,600 usable gates
User I/O Pins 34 user I/O pins 34 user I/O pins 34 user I/O pins 34 user I/O pins 34 user I/O pins
Core Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V
Speed Grade -7, 5 ns pin-to-pin logic delay -10, slower speed class -5, faster speed class -10, slower speed class -7, 5 ns pin-to-pin logic delay
Temperature Suffix C - commercial C - commercial C - commercial I - industrial I - industrial
Function Blocks 4 function blocks 4 function blocks 4 function blocks 4 function blocks 4 function blocks

Penyeberangsung Jelas

  • Balanced -7 speed and commercial-temperature ordering (vsXC9572XL-7VQG44I)
  • Timing performance between the slower and faster speed grades (vsXC9572XL-10VQG44C)
  • Lower-delay option remains footprint compatible (vsXC9572XL-5VQG44C)
  • Commercial-temperature option for standard environments (vsXC9572XL-10VQG44I)

Catatan Desain

Do not select a replacement solely because the package drawing matches. The XC9572XL-10 and XC9572XL-5 options change the speed class, while the I option changes the temperature grade. Validate the complete timing budget, operating-temperature range, pin functions, and programming configuration for each ordering code. Re-run implementation and static timing analysis after changing speed or temperature variants rather than assuming the target device's constraints apply unchanged.

Use the 44-pin VQFP land pattern and pin-1 orientation from AMD data sheet DS057 when laying out the PCB. Place decoupling structures close to the appropriate supply pins and route the 34 user I/O signals away from fast-switching or high-current paths where practical. Because no exposed-pad construction is identified for this package, do not assign an exposed-pad thermal land without confirming it in the official package drawing.

Evaluate every high-speed or heavily loaded net against the output-current, rise-time, and capacitive-loading limits in the XC9572XL data sheet. Add series damping only after accounting for the actual receiver and trace loading, and avoid long stubs between the CPLD and external devices. The 5 ns pin-to-pin logic delay does not by itself guarantee system-level timing; external device delays, trace skew, setup time, and hold time must also be included.

Keep programming and configuration signals away from noisy analog or switching circuitry, and provide a stable 3.3 V supply with local high-frequency bypass capacitors. Review ground-return paths so output switching currents do not share narrow return paths with sensitive logic. For systems combining the CPLD with external memory or transceivers, use the manufacturer pin assignments and timing constraints to separate data, clock, and control routing where the implementation permits.

Estimated: the CPLD's actual dissipation depends on logic activity, output loading, supply voltage, and the package thermal environment, none of which is established by the available family-level information. Evaluate it with the actual switching workload and the board’s copper area instead of applying a generic thermal figure. Keep the device within its specified ambient and junction limits, and provide airflow or copper spreading where the enclosure raises the local temperature.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was established for the exact ordering code. The G suffix identifies the industrial-temperature option in this family, but it does not itself establish AEC-Q100 qualification.

Pencarian Berhubungan

xc9572xl datasheet xc9572xl pinout xc9572xl programming xc9572xl 10vqg44c xc9572xl 10vqg44i xc9572xl 10vqg64c xc9572xl 7vqg64i XC9572XL-7VQG44C datasheet pdf XC9572XL-7VQG44C pinout XC9572XL-7VQG44C replacement XC9572XL-7VQG44C equivalent XC9572XL-7VQG44C price XC9572XL-7VQG44C vs XC9572XL-5VQG44C AMD XC9572XL VQFP-44 CPLD

Komponen dan Tanda berkaitan

AMD XC9572XL-7VQG44C XC9572XL XC9500XL XC9572XL-10VQG44C XC9572XL-5VQG44C XC9572XL-10VQG44I XC9572XL-7VQG44I CPLD complex programmable logic device FPGA programmable logic device semiconductor 54V18 function block 72 macrocells 1,600 usable gates 34 user I/O pins 3.3 V core supply 5 ns pin-to-pin logic delay 178 MHz system frequency VQFP-44 QFN family surface mount SMD JTAG programming Xilinx ISE
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ