AMD

XCKU035-2SFVA784I - 468 I/O Kintex UltraScale FPGA | AMD

MPN: XCKU035-2SFVA784I ✓ Aktif
0.95 V Vdss 784-BFBGA, FCCSP Package -2 Speed 19,456,000 bits Memory
MOQ: 1 |

XCKU035-2SFVA784I Ringkasan

AMD XCKU035-2SFVA784I is a Kintex UltraScale field-programmable gate array with 468 I/O channels, 444343 logic cells, and 19,456,000 bits of memory capacity, housed in a 784-BFBGA FCCSP package. The -2 designation identifies the performance grade, while the industrial-temperature suffix supports operation from -40°C to 100°C junction temperature. The device belongs to AMD's Kintex UltraScale family, built on a 20 nm process for high-performance programmable logic, signal processing, and high-speed connectivity.

A field-programmable gate array is a semiconductor whose configurable logic, memory, and I/O resources can be programmed after manufacture. An FPGA sits above programmable logic within the broader digital semiconductor hierarchy, combining parallel or serial interfaces, digital signal processing, block RAM, and clocking resources in one device. This integration allows a board to implement multiple fixed-function ICs in a single reconfigurable silicon platform while shortening development cycles and supporting post-deployment updates.

The XCKU035-2SFVA784I combines a large Kintex UltraScale logic resource with 468 user I/O in a high-pin-count BFBGA package. Its -2 speed grade provides a defined performance level for designs requiring substantial parallel processing or high-speed interface bandwidth. The package uses a fine-pitch ball-grid-array format intended primarily for multilayer PCB designs, where careful escape routing, via planning, and power-delivery design are essential.

The 784-BFBGA package presents a demanding electrical and mechanical implementation challenge because hundreds of balls connect a large FPGA to a dense PCB. Designers must use a PCB stack-up and ball-out supported by the device documentation, provide clean power rails, preserve signal integrity on high-speed interfaces, and verify that the assembled board satisfies thermal and via-in-pad requirements. The industrial temperature rating makes the device suitable for equipment expected to operate across extended commercial and industrial environments, subject to correct thermal design.

Typical uses include industrial control, test and measurement, networking, high-speed signal acquisition, video processing, and embedded communications systems. In these applications, the FPGA can implement parallel data paths, protocol conversion, real-time filtering, interface bridging, and control logic in one programmable device. Its combination of logic density, I/O availability, and 784-ball packaging supports systems where a smaller FPGA or several discrete logic devices would be less practical.

Replacement planning must account for more than the device name. The speed grade, industrial-temperature suffix, package designation, and pinout all affect system timing, qualification, and PCB compatibility. A different package is not a drop-in replacement even when it uses the same Kintex UltraScale family, while a different speed or temperature grade can change design margins. Compare the exact ordering code and AMD documentation before approving a substitute.

This product record combines the exact orderable MPN, package and resource details, verified cross-reference candidates, practical PCB considerations, and selection guidance. It supports engineers comparing FPGA capacity, package compatibility, industrial-temperature operation, and lifecycle needs before initiating a quote through the XAIPART Request a Quote form.

Pilihan pengganti yang segera untuk XCKU035-2SFVA784I — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera XCKU035-2SFVA784I (sama faktor bentuk dan kaki) — berbeza dalam Device Type, Package, Logic Cells, RoHS Status, Speed Grade.

AMD
Device Type: Kintex UltraScale Field Programmable Gate Array (FPGA)
Package: 784-ball BFBGA (FCCSP)
Speed Grade: -1 standard speed grade
Bandingkan Dengan XCKU035-2SFVA784I →
AMD
Device Type: Kintex UltraScale FPGA
Package: 784-FCCSP BGA
Logic Cells: 355,474 cells
Bandingkan Dengan XCKU035-2SFVA784I →

XCKU035-1SFVA784I

✅ Masuk Drop-In
AMD
📦 784-BFBGA, FCCSP
Kintex UltraScale Field Programmable Gate Array (FPGA) · 444343 cells · 468 I/O · 784-ball BFBGA (FCCSP) · 20 nm process · 0.95 V · -1 standard speed grade · Industrial (I suffix)

Hubungi untuk harga

Lihat Datasheet →

XCKU035-2SFVA784E

✅ Masuk Drop-In
AMD
📦 784-BFBGA, FCCSP
Kintex UltraScale FPGA · 355,474 cells · 468 I/O · 784-FCCSP BGA · 23 mm x 23 mm · 20 nm · 0.922 V to 0.979 V · 784 pins

Hubungi untuk harga

Lihat Datasheet →

XCKU035-2SFVA784I Penilaian maksimum & Ciri-ciri Elektrik

Device Type Kintex UltraScale field-programmable gate array (FPGA)
Logic Cells 444343 cells
Device Memory Capacity 19,456,000 bits
User I/O Count 468 I/O
Speed Grade -2
Temperature Grade Industrial, -40°C to 100°C junction temperature
Kemasan 784-BFBGA, FCCSP
Package Pin or Ball Count 784 balls
Process Technology 20 nm
Core Supply Voltage 0.95 V
FPGA Architecture Kintex UltraScale
Programmable Logic Type FPGA
Jenis Pemasangan Surface mount
Package Family BFBGA family
Status RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable
Lead-Free Status unknown
Halogen-Free Status unknown

Panduan Konfigurasi Pin XCKU035-2SFVA784I bfbga family

Konfigurasi pin untuk XCKU035-2SFVA784I (bfbga family pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai bfbga family untuk XCKU035-2SFVA784I

Tiada data garisan pin yang diperoleh untuk XCKU035-2SFVA784I.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

XCKU035-2SFVA784I patut untuk 6 aplikasis: Industrial Control and Automation, High-Speed Data Acquisition, Test and Measurement Instrumentation, Networking and Communication Equipment, Video and Image Processing, Embedded Communication Gateway.

🏭

Industrial Control and Automation

The XCKU035-2SFVA784I fits industrial controllers that combine deterministic machine control with substantial communication and data-acquisition logic. Its 444343 logic cells and 468 I/O provide capacity for multiple I/O-intensive control sections, while the -40°C to 100°C industrial junction-temperature rating supports equipment operating beyond the commercial range. A designer can place sensor acquisition, motion sequencing, safety interlocks, and industrial protocol handling in one device. The principal engineering concern is board density: the 784-ball BFBGA requires controlled escape routing, a qualified multilayer stack-up, robust power delivery, and thermal analysis. The system should also provide input protection and isolation rather than relying on the FPGA I/O structure alone for hazardous industrial interfaces.

📡

High-Speed Data Acquisition

The XCKU035-2SFVA784I is suitable for parallel and multi-channel data-acquisition systems requiring substantial on-device processing. Its 468 I/O allow direct connections to converters, capture logic, clocks, and synchronization signals, while 444343 logic cells support filtering, triggering, packetization, and real-time analysis. Placing acquisition control and processing in the FPGA reduces the need for external glue logic and allows the design to adapt to different sensor or converter configurations. Engineering attention is required at the analog interface, including differential clocking, controlled impedance, return-path continuity, and appropriate grounding. The 20 nm Kintex UltraScale device should be paired with an AMD-supported high-density PCB process so that power, via, and escape-routing constraints for the 784-ball package can be met reliably.

🔧

Test and Measurement Instrumentation

XCKU035-2SFVA784I fits test and measurement instruments that combine pattern generation, response capture, timing control, and communications in one programmable platform. The 468 I/O can support digital stimulus and capture channels, while the large logic-cell count can implement timing engines, reference designs, analysis pipelines, and instrument-control logic. Its industrial-temperature grade is useful for compact systems deployed in factories or laboratories with variable ambient conditions. A practical implementation should use carefully clocked acquisition paths and isolate fast digital edges from sensitive analog circuitry. Because the device uses 784 BFBGA balls, designers should evaluate layer count, via-in-pad construction, solder-mask and stencil strategy, and thermal spreading before committing the board to volume production.

🌐

Networking and Communication Equipment

The XCKU035-2SFVA784I is appropriate for network equipment requiring high logic density, extensive packet handling, and flexible I/O allocation. Its 444343 logic cells and 468 I/O can support packet classification, buffering, queue management, protocol conversion, telemetry, and interface adaptation. The Kintex UltraScale family's emphasis on signal-processing bandwidth and next-generation transceivers makes the device relevant to high-speed communication designs. Actual interface rates and transceiver configuration must be verified against the exact AMD device documentation, including the selected package and -2 speed grade. PCB implementation should preserve uninterrupted reference planes beneath high-speed links and separate sensitive clocking from switching circuitry to reduce coupling and timing uncertainty.

📺

Video and Image Processing

XCKU035-2SFVA784I can support video infrastructure, image processing, display interfaces, and pixel-stream processing where parallel data paths and deterministic logic are important. The 468 I/O provide access to multiple low-voltage interfaces, while 444343 logic cells allow parallel pipelines, frame buffers, color processing, scaling, and synchronization to be consolidated in the FPGA. The -2 speed grade supports designs that need more timing margin than the -1 grade, provided the complete design passes timing analysis. Signal integrity is especially important for wide video buses, so routing should include length matching where required, solid return paths, and controlled impedance. The 784-ball package also increases assembly complexity, making prototype assembly and board yield important system-level considerations.

🧩

Embedded Communication Gateway

The XCKU035-2SFVA784I is suitable for embedded gateways that translate between multiple fieldbus, industrial Ethernet, storage, and host-interface protocols. Its large logic-cell and I/O resources allow protocol conversion, buffering, routing, encryption support, and diagnostic logging to be consolidated into one device instead of split across several fixed-function components. The industrial junction-temperature range supports gateways deployed in protected cabinets with internally elevated temperatures, provided the enclosure and PCB keep the device within its limits. Designers should separate high-speed digital traffic from sensitive analog or low-level sensor circuits, define power states carefully, and verify all interfaces against the exact AMD pinout. Reconfigurability also allows field updates, but deployed bitstreams and recovery mechanisms must be validated for each product configuration.

What is the AMD XCKU035-2SFVA784I?
The AMD XCKU035-2SFVA784I is a Kintex UltraScale FPGA built on a 20 nm process, with 444343 logic cells, 19,456,000 bits of memory capacity, and 468 user I/O in a 784-BFBGA FCCSP package. According to the AMD Kintex UltraScale product page, the family targets high-performance signal processing and connectivity applications while emphasizing price/performance per watt. The -2 suffix denotes the speed grade, and the I suffix identifies the industrial-temperature configuration.
How many I/O, logic cells, and memory bits does XCKU035-2SFVA784I have?
The XCKU035-2SFVA784I provides 468 user I/O, 444343 logic cells, and 19,456,000 bits of memory capacity. These figures identify it as a high-density Kintex UltraScale device suitable for parallel logic, data acquisition, protocol handling, and embedded signal-processing systems. AMD's Kintex UltraScale product overview describes the family as delivering strong signal-processing bandwidth and next-generation transceivers in a mid-range FPGA platform.
What package does XCKU035-2SFVA784I use?
The XCKU035-2SFVA784I uses a 784-ball BFBGA package with an FCCSP package designation. Because it has 784 balls, the device requires a multilayer PCB with a footprint and escape-routing strategy matched to the manufacturer's package drawing. Its package is one of the highest-density options shown for this device family, so assembly process capability, via design, thermal management, and inspection requirements should be reviewed before layout release.
What is the operating temperature range of XCKU035-2SFVA784I?
The XCKU035-2SFVA784I is the industrial-temperature version and is specified from -40°C to 100°C junction temperature. The final case or ambient operating range can be narrower because it depends on the package, PCB thermal design, airflow, and power dissipation. Use the AMD package data and system thermal calculations when establishing enclosure limits, and ensure the junction rating is never used as a substitute for board-level temperature verification.
Where can I download the XCKU035-2SFVA784I datasheet?
The manufacturer information for XCKU035-2SFVA784I is available through AMD's Kintex UltraScale product page and the linked XCKU035 documentation. The Octopart datasheet result also provides access to a datasheet listing for this exact orderable part. For pin definitions, ball assignments, power rails, and package dimensions, use the exact XCKU035-2SFVA784I data sheet and package files rather than a generic FPGA guide.
Where can I find the XCKU035-2SFVA784I pinout?
The XCKU035-2SFVA784I pin and ball assignments are documented in the AMD UltraScale device pinout and package documentation for the SFVA784 package. AMD Adaptive Support identifies the device as an UltraScale member and points users toward the appropriate UltraScale pin-description material. Assign PCB nets from the exact package and speed-grade tables, including dedicated configuration, clock, power, ground, and user I/O balls.
Is XCKU035-2SFVA784I suitable for industrial control systems?
Yes, XCKU035-2SFVA784I is appropriate for industrial control systems requiring the industrial -40°C to 100°C junction-temperature grade and extensive programmable logic resources. Its 468 I/O and 444343 logic cells can support machine control, data acquisition, communication bridging, and real-time processing. The system still needs appropriate input protection, isolation where required, power conditioning, environmental qualification, and a PCB thermal design that controls junction temperature.
What can replace the XCKU035-2SFVA784I?
The closest verified replacement candidates are XCKU035-1SFVA784I and XCKU035-2SFVA784E because they retain the same 784-ball SFVA package family. They are not unconditional substitutions: the -1 device uses a different speed grade, while the -2SFVA784E changes the temperature suffix and therefore the qualification range. Validate timing, thermal requirements, bitstream compatibility, and exact ordering information with AMD before replacement.
Is XCKU035-1SFVA784I the same as XCKU035-2SFVA784I?
No. XCKU035-1SFVA784I and XCKU035-2SFVA784I share the Kintex UltraScale device family, 444343 logic cells, 468 I/O, and 784-BFBGA format, but their speed grades differ. The -1 suffix identifies a different performance grade from the target -2 device. Existing boards may retain the same physical footprint, but timing closure and production qualification must be rerun for the selected replacement.
XCKU035-2SFVA784I vs XCKU035-1SFVA784I — which is better?
XCKU035-2SFVA784I is the better choice when the design requires the target -2 performance grade, while XCKU035-1SFVA784I may be acceptable when the lower speed grade meets timing and the same package is required. Both are listed with 468 I/O, 444343 logic cells, and a 784-BFBGA package. Speed-grade changes can alter achievable clock rates and timing margins, so compare the complete design rather than relying on package compatibility alone.
When should I choose XCKU035-2SFVA784I over XCKU035-2SFVA784E?
Choose XCKU035-2SFVA784I when the equipment requires the industrial-temperature suffix and a junction-temperature capability extending to 100°C. Choose XCKU035-2SFVA784E when the commercial-temperature range of 0°C to 85°C is sufficient and the lower-temperature application does not require industrial coverage. Both retain the same -2 speed grade and 784-ball package family, but their environmental requirements differ.
Where to buy XCKU035-2SFVA784I online?
Use the XAIPART Request a Quote form on this page to request availability, lot information, and an order quote for XCKU035-2SFVA784I. The exact orderable code includes the -2 speed grade, industrial-temperature suffix, and SFVA784 package designation, so each request should identify that complete MPN. For design review, AMD's product page and the exact XCKU035 documentation remain the authoritative references for device functions.
What is the price of XCKU035-2SFVA784I?
The current commercial price for XCKU035-2SFVA784I should be obtained through the XAIPART Request a Quote form on this page because configured FPGA pricing depends on quantity, lot, sourcing condition, and supporting manufacturing requirements. The visible listing identifies the exact MPN, package, resource count, and 784-ball construction. Submit the complete orderable code with your target quantity and any required traceability or date-code constraints.
What is the lead time and stock status for XCKU035-2SFVA784I?
Current stock and lead time for XCKU035-2SFVA784I should be requested through the XAIPART Request a Quote form on this page. Include the required quantity, target date, acceptable package condition, and any lot-traceability requirements. Because this is a large 784-ball Kintex UltraScale FPGA, procurement planning should include assembly capacity, PCB availability, configuration-support planning, and sufficient time for board bring-up.
How should a PCB be designed for XCKU035-2SFVA784I?
The PCB should use the exact SFVA784 footprint and stack-up supported by AMD's package documentation, with signal-integrity, via-in-pad, and assembly requirements reviewed before routing. Separate power planes and distribution networks should meet the device's rail requirements, while high-speed links require continuous reference planes and controlled return paths. Thermal design must also accommodate the device's industrial temperature qualification without allowing junction temperature to exceed its 100°C limit.

Data referensi kejuruteraan untuk XCKU035-2SFVA784I — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose XCKU035-2SFVA784I when the design requires the -2 speed grade, industrial-temperature coverage from -40°C to 100°C junction temperature, and the exact SFVA784 784-ball footprint. XCKU035-1SFVA784I can be considered when the same package and 468 I/O are needed but the lower -1 speed grade satisfies all timing requirements; complete static and dynamic timing validation is still mandatory. XCKU035-2SFVA784E preserves the -2 speed grade and package family, but its 0°C to 85°C commercial range makes it appropriate only when industrial thermal coverage is unnecessary. Parts in FFVA1156, FBVA676, and other package families require a new PCB layout and are not drop-in replacements. For production design, verify the complete ordering code, AMD lifecycle status, pin and power documentation, bitstream support, and assembly capability before approval.

Perbandingan dengan Gantian

Parametr Produk Ini XCKU035-1SFVA784I XCKU035-2SFVA784E
Brand AMD AMD AMD
Package 784-BFBGA, FCCSP 784-BFBGA, FCCSP 784-BFBGA, FCCSP
FPGA Family Kintex UltraScale Kintex UltraScale Kintex UltraScale
Speed Grade -2 -1 -2
Process Technology 20 nm 20 nm 20 nm

Penyeberangsung Jelas

  • Maintains the target -2 speed grade with the same SFVA784 package (vsXCKU035-1SFVA784I)
  • Provides wider industrial junction-temperature coverage (vsXCKU035-2SFVA784E)
  • Matches the target's package and core resource configuration (vsXCKU035-1SFVA784I)

Catatan Desain

Treat the 784-BFBGA layout as a high-density PCB rather than a conventional two-layer assembly. Use the exact SFVA784 footprint and a stack-up supported by AMD's package documentation, preserve short return paths beneath high-speed interfaces, and plan escape routing before placing external circuitry. The board should also be reviewed for via-in-pad construction, solder-mask and stencil requirements, and the number of layers needed to route 468 user I/O plus dedicated power, ground, configuration, and clock balls.

Use the AMD power-delivery guidance for the exact XCKU035 device when defining the VCCINT, VCCAUX, VCCBRAM, and other applicable rails. Separate high-current distribution paths as recommended, place local decoupling at the relevant supply balls, and verify the design against the device's stated core voltage of 0.95 V. Rail sequencing, ramp limits, and power-supply tolerance should be included in system-level validation rather than inferred from the package name.

Estimated: the device is specified for an industrial junction-temperature range up to 100°C. The actual case and ambient limits depend on PCB copper, adjacent components, airflow, and the power consumed by the configured design. Use the manufacturer's power-estimation methodology for the implemented design, model the board in its enclosure, and preserve thermal spreading paths. Do not treat the 100°C junction limit as an allowable ambient specification.

High-speed interfaces and clocks must be routed with continuous reference planes, controlled impedance, and appropriate escape geometry. Keep the 784-ball device's power and ground balls connected through a stack-up capable of supporting its switching current, and avoid splitting return paths beneath high-speed nets. Simulation should reflect actual connector, package, and PCB models, while test points should be placed without disrupting the intended high-speed topology.

A matching ball count does not by itself establish replacement equivalence. The -1 speed grade can alter timing margins, and the -2SFVA784E commercial-temperature suffix changes environmental coverage. Conversely, alternatives in FFVA1156, FBVA676, or other package variants are not drop-in choices for an SFVA784 PCB. After any substitution, rerun timing analysis, I/O mapping, power integrity, thermal analysis, and board-level validation using the exact replacement ordering code.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The industrial-temperature suffix does not by itself establish AEC-Q100 qualification. Compliance declarations were not stated in the product listings and require confirmation from AMD documentation or the supplier.

Data disahkan pada: 2026-11-14 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

xcku035 1ffva1156c xcku035 1fbva676c xcku035 1ffva1156i xcku035 1fbva676i xcku035 2ffva1156i xcku035 1sfva784c xcku035 fbva676 2 e xcku035 1ffva1156 XCKU035-2SFVA784I datasheet XCKU035-2SFVA784I pinout XCKU035-2SFVA784I replacement XCKU035-2SFVA784I price AMD XCKU035-2SFVA784I XCKU035-2SFVA784I 784 BFBGA XCKU035-2SFVA784I industrial FPGA

Komponen dan Tanda berkaitan

AMD XCKU035-2SFVA784I XCKU035-1SFVA784I XCKU035-2SFVA784E Kintex UltraScale field-programmable gate array FPGA programmable logic logic cell user I/O 468 I/O 444343 logic cells 19,456,000-bit memory capacity 20 nm process 0.95 V core supply 784-BFBGA FCCSP BFBGA package family surface-mount semiconductor signal processing industrial temperature grade -40°C to 100°C junction temperature field-programmable gate array programmable logic device
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ