XCKU035-2SFVA784I - 468 I/O Kintex UltraScale FPGA | AMD
MPN: XCKU035-2SFVA784I ✓ AktifXCKU035-2SFVA784I Genel Bakış
A field-programmable gate array is a semiconductor whose configurable logic, memory, and I/O resources can be programmed after manufacture. An FPGA sits above programmable logic within the broader digital semiconductor hierarchy, combining parallel or serial interfaces, digital signal processing, block RAM, and clocking resources in one device. This integration allows a board to implement multiple fixed-function ICs in a single reconfigurable silicon platform while shortening development cycles and supporting post-deployment updates.
The XCKU035-2SFVA784I combines a large Kintex UltraScale logic resource with 468 user I/O in a high-pin-count BFBGA package. Its -2 speed grade provides a defined performance level for designs requiring substantial parallel processing or high-speed interface bandwidth. The package uses a fine-pitch ball-grid-array format intended primarily for multilayer PCB designs, where careful escape routing, via planning, and power-delivery design are essential.
The 784-BFBGA package presents a demanding electrical and mechanical implementation challenge because hundreds of balls connect a large FPGA to a dense PCB. Designers must use a PCB stack-up and ball-out supported by the device documentation, provide clean power rails, preserve signal integrity on high-speed interfaces, and verify that the assembled board satisfies thermal and via-in-pad requirements. The industrial temperature rating makes the device suitable for equipment expected to operate across extended commercial and industrial environments, subject to correct thermal design.
Typical uses include industrial control, test and measurement, networking, high-speed signal acquisition, video processing, and embedded communications systems. In these applications, the FPGA can implement parallel data paths, protocol conversion, real-time filtering, interface bridging, and control logic in one programmable device. Its combination of logic density, I/O availability, and 784-ball packaging supports systems where a smaller FPGA or several discrete logic devices would be less practical.
Replacement planning must account for more than the device name. The speed grade, industrial-temperature suffix, package designation, and pinout all affect system timing, qualification, and PCB compatibility. A different package is not a drop-in replacement even when it uses the same Kintex UltraScale family, while a different speed or temperature grade can change design margins. Compare the exact ordering code and AMD documentation before approving a substitute.
This product record combines the exact orderable MPN, package and resource details, verified cross-reference candidates, practical PCB considerations, and selection guidance. It supports engineers comparing FPGA capacity, package compatibility, industrial-temperature operation, and lifecycle needs before initiating a quote through the XAIPART Request a Quote form.
Drop-in alternatifler için XCKU035-2SFVA784I — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller XCKU035-2SFVA784I (aynı form faktörü ve ayağa oturma) — farklı olan Device Type, Package, Logic Cells, RoHS Status, Speed Grade.
XCKU035-1SFVA784I
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XCKU035-2SFVA784E
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XCKU035-2SFVA784I Maksimum Değerlendirmeler & Elektriksel Özellikler
| Device Type | Kintex UltraScale field-programmable gate array (FPGA) |
| Logic Cells | 444343 cells |
| Device Memory Capacity | 19,456,000 bits |
| User I/O Count | 468 I/O |
| Speed Grade | -2 |
| Temperature Grade | Industrial, -40°C to 100°C junction temperature |
| Paket | 784-BFBGA, FCCSP |
| Package Pin or Ball Count | 784 balls |
| Process Technology | 20 nm |
| Core Supply Voltage | 0.95 V |
| FPGA Architecture | Kintex UltraScale |
| Programmable Logic Type | FPGA |
| Montaj Türü | Surface mount |
| Package Family | BFBGA family |
| RoHS Durumu | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
| Lead-Free Status | unknown |
| Halogen-Free Status | unknown |
XCKU035-2SFVA784I bfbga family Pin Yapısı Kılavuzu
XCKU035-2SFVA784I (bfbga family paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: XCKU035-2SFVA784I.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
XCKU035-2SFVA784I için uygundur 6 uygulamas: Industrial Control and Automation, High-Speed Data Acquisition, Test and Measurement Instrumentation, Networking and Communication Equipment, Video and Image Processing, Embedded Communication Gateway.
Industrial Control and Automation
The XCKU035-2SFVA784I fits industrial controllers that combine deterministic machine control with substantial communication and data-acquisition logic. Its 444343 logic cells and 468 I/O provide capacity for multiple I/O-intensive control sections, while the -40°C to 100°C industrial junction-temperature rating supports equipment operating beyond the commercial range. A designer can place sensor acquisition, motion sequencing, safety interlocks, and industrial protocol handling in one device. The principal engineering concern is board density: the 784-ball BFBGA requires controlled escape routing, a qualified multilayer stack-up, robust power delivery, and thermal analysis. The system should also provide input protection and isolation rather than relying on the FPGA I/O structure alone for hazardous industrial interfaces.
Önerilen
High-Speed Data Acquisition
The XCKU035-2SFVA784I is suitable for parallel and multi-channel data-acquisition systems requiring substantial on-device processing. Its 468 I/O allow direct connections to converters, capture logic, clocks, and synchronization signals, while 444343 logic cells support filtering, triggering, packetization, and real-time analysis. Placing acquisition control and processing in the FPGA reduces the need for external glue logic and allows the design to adapt to different sensor or converter configurations. Engineering attention is required at the analog interface, including differential clocking, controlled impedance, return-path continuity, and appropriate grounding. The 20 nm Kintex UltraScale device should be paired with an AMD-supported high-density PCB process so that power, via, and escape-routing constraints for the 784-ball package can be met reliably.
Önerilen
Test and Measurement Instrumentation
XCKU035-2SFVA784I fits test and measurement instruments that combine pattern generation, response capture, timing control, and communications in one programmable platform. The 468 I/O can support digital stimulus and capture channels, while the large logic-cell count can implement timing engines, reference designs, analysis pipelines, and instrument-control logic. Its industrial-temperature grade is useful for compact systems deployed in factories or laboratories with variable ambient conditions. A practical implementation should use carefully clocked acquisition paths and isolate fast digital edges from sensitive analog circuitry. Because the device uses 784 BFBGA balls, designers should evaluate layer count, via-in-pad construction, solder-mask and stencil strategy, and thermal spreading before committing the board to volume production.
Önerilen
Networking and Communication Equipment
The XCKU035-2SFVA784I is appropriate for network equipment requiring high logic density, extensive packet handling, and flexible I/O allocation. Its 444343 logic cells and 468 I/O can support packet classification, buffering, queue management, protocol conversion, telemetry, and interface adaptation. The Kintex UltraScale family's emphasis on signal-processing bandwidth and next-generation transceivers makes the device relevant to high-speed communication designs. Actual interface rates and transceiver configuration must be verified against the exact AMD device documentation, including the selected package and -2 speed grade. PCB implementation should preserve uninterrupted reference planes beneath high-speed links and separate sensitive clocking from switching circuitry to reduce coupling and timing uncertainty.
Önerilen
Video and Image Processing
XCKU035-2SFVA784I can support video infrastructure, image processing, display interfaces, and pixel-stream processing where parallel data paths and deterministic logic are important. The 468 I/O provide access to multiple low-voltage interfaces, while 444343 logic cells allow parallel pipelines, frame buffers, color processing, scaling, and synchronization to be consolidated in the FPGA. The -2 speed grade supports designs that need more timing margin than the -1 grade, provided the complete design passes timing analysis. Signal integrity is especially important for wide video buses, so routing should include length matching where required, solid return paths, and controlled impedance. The 784-ball package also increases assembly complexity, making prototype assembly and board yield important system-level considerations.
Önerilen
Embedded Communication Gateway
The XCKU035-2SFVA784I is suitable for embedded gateways that translate between multiple fieldbus, industrial Ethernet, storage, and host-interface protocols. Its large logic-cell and I/O resources allow protocol conversion, buffering, routing, encryption support, and diagnostic logging to be consolidated into one device instead of split across several fixed-function components. The industrial junction-temperature range supports gateways deployed in protected cabinets with internally elevated temperatures, provided the enclosure and PCB keep the device within its limits. Designers should separate high-speed digital traffic from sensitive analog or low-level sensor circuits, define power states carefully, and verify all interfaces against the exact AMD pinout. Reconfigurability also allows field updates, but deployed bitstreams and recovery mechanisms must be validated for each product configuration.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: XCKU035-2SFVA784I — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | XCKU035-1SFVA784I | XCKU035-2SFVA784E |
|---|---|---|---|
| Brand | AMD | AMD | AMD |
| Package | 784-BFBGA, FCCSP | 784-BFBGA, FCCSP | 784-BFBGA, FCCSP |
| FPGA Family | Kintex UltraScale | Kintex UltraScale | Kintex UltraScale |
| Speed Grade | -2 | -1 | -2 |
| Process Technology | 20 nm | 20 nm | 20 nm |
Ana Farklılayıcılar
- Maintains the target -2 speed grade with the same SFVA784 package (karşılaştırma:XCKU035-1SFVA784I)
- Provides wider industrial junction-temperature coverage (karşılaştırma:XCKU035-2SFVA784E)
- Matches the target's package and core resource configuration (karşılaştırma:XCKU035-1SFVA784I)
Tasarım Notları
Treat the 784-BFBGA layout as a high-density PCB rather than a conventional two-layer assembly. Use the exact SFVA784 footprint and a stack-up supported by AMD's package documentation, preserve short return paths beneath high-speed interfaces, and plan escape routing before placing external circuitry. The board should also be reviewed for via-in-pad construction, solder-mask and stencil requirements, and the number of layers needed to route 468 user I/O plus dedicated power, ground, configuration, and clock balls.
Use the AMD power-delivery guidance for the exact XCKU035 device when defining the VCCINT, VCCAUX, VCCBRAM, and other applicable rails. Separate high-current distribution paths as recommended, place local decoupling at the relevant supply balls, and verify the design against the device's stated core voltage of 0.95 V. Rail sequencing, ramp limits, and power-supply tolerance should be included in system-level validation rather than inferred from the package name.
Estimated: the device is specified for an industrial junction-temperature range up to 100°C. The actual case and ambient limits depend on PCB copper, adjacent components, airflow, and the power consumed by the configured design. Use the manufacturer's power-estimation methodology for the implemented design, model the board in its enclosure, and preserve thermal spreading paths. Do not treat the 100°C junction limit as an allowable ambient specification.
High-speed interfaces and clocks must be routed with continuous reference planes, controlled impedance, and appropriate escape geometry. Keep the 784-ball device's power and ground balls connected through a stack-up capable of supporting its switching current, and avoid splitting return paths beneath high-speed nets. Simulation should reflect actual connector, package, and PCB models, while test points should be placed without disrupting the intended high-speed topology.
A matching ball count does not by itself establish replacement equivalence. The -1 speed grade can alter timing margins, and the -2SFVA784E commercial-temperature suffix changes environmental coverage. Conversely, alternatives in FFVA1156, FBVA676, or other package variants are not drop-in choices for an SFVA784 PCB. After any substitution, rerun timing analysis, I/O mapping, power integrity, thermal analysis, and board-level validation using the exact replacement ordering code.
Uyumluluk Bilgisi
The industrial-temperature suffix does not by itself establish AEC-Q100 qualification. Compliance declarations were not stated in the product listings and require confirmation from AMD documentation or the supplier.