XMC4500F100F768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon
MPN: XMC4500F100F768ACXQMA1 ✓ AktifXMC4500F100F768ACXQMA1 Ringkasan
A microcontroller is a programmable system-on-chip that combines a processor core, memory, and dedicated peripherals in one integrated device. The ARM Cortex-M4 core provides efficient real-time instruction execution, while the XMC4500 family adds configurable peripherals for industrial communications and mixed-signal control. This XMC4500 variant combines Ethernet MAC connectivity with CAN and LIN networking, making it suitable for connected industrial equipment.
Key device characteristics include a maximum clock frequency of 120 MHz, 768 kB of flash for firmware storage, 160 kB of SRAM for working data, and operation from a 3.3 V supply. The ordering code XMC4500F100F768ACXQMA1 identifies the 768 kB flash configuration in the LQFP-100 industrial package. The Infineon product page identifies the base XMC4500-F100F768-AC ordering designation as an industrial ARM Cortex-M4 device with Ethernet MAC.
The XMC architecture provides a configurable peripheral set that allows engineers to tailor analog, timing, communications, and digital control resources to the target application. Ethernet MAC support supports network-connected industrial nodes, while CAN and LIN interfaces enable connection to fieldbus and automotive-style vehicle networks. At 120 MHz, the Cortex-M4 core also provides sufficient performance for real-time control loops, data acquisition, and protocol handling.
Typical uses include industrial Ethernet controllers, motor and power conversion systems, factory automation equipment, CAN and LIN network nodes, and industrial sensors that require substantial local memory. The 768 kB flash capacity reduces the need for external program memory in firmware-intensive control systems, while 160 kB of RAM supports buffering and communication stacks.
When laying out the board, route the exposed-pad and ground connections according to the manufacturer land-pattern and thermal guidance in the XMC4500 datasheet. Confirm the power-supply design against the 3.13 V to 3.63 V operating range listed for this ordering code, and verify every pin function and alternate-function assignment against the package-specific pin table before routing.
This page combines manufacturer and distributor product information with practical configuration guidance, package details, sourcing information, and design considerations. The comparison and selection notes help engineers evaluate the exact XMC4500 ordering code against other Infineon XMC industrial microcontroller options while avoiding assumptions about unverified pin compatibility.
Pilihan pengganti yang segera untuk XMC4500F100F768ACXQMA1 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
XMC4500-F100F768-AC
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XMC4500F100F768ACXQMA1 Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 32-bit industrial ARM Cortex-M4 microcontroller |
| Processor Core | ARM Cortex-M4 |
| Maximum CPU Frequency | 120 MHz |
| Embedded Flash Memory | 768 kB |
| Flash Organization | 768K x 8 |
| RAM | 160 kB |
| Supply Voltage Range | 3.13 V to 3.63 V |
| Nominal Supply Voltage | 3.3 V |
| Ethernet Interface | Ethernet MAC |
| CAN Interface | CAN |
| LIN Interface | LIN |
| Kemasan | PG-LQFP-100-11, 14 mm x 14 mm |
| Kiraan Pin | 100 pins |
| Jenis Pemasangan | Surface mount |
| Shipping Format | Tray |
| Status RoHS | Compliant |
| Operating Voltage | 1.3 V / 3.3 V |
| Series | XMC4000 / XMC4500 |
| Analog and Control Resources | Configurable mixed-signal peripheral set |
| Manufacturer Base Ordering Designation | XMC4500-F100F768-AC |
Panduan Konfigurasi Pin XMC4500F100F768ACXQMA1 pg-lqfp-100-11, 14 mm x 14 mm
Konfigurasi pin untuk XMC4500F100F768ACXQMA1 (pg-lqfp-100-11, 14 mm x 14 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk XMC4500F100F768ACXQMA1.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
XMC4500F100F768ACXQMA1 patut untuk 6 aplikasis: Industrial Ethernet Control Node, CAN and LIN Gateway Controller, Industrial Motor and Power Controller, Factory Automation Sensor Hub, Automotive Network Terminal, Real-Time Data Acquisition System.
Industrial Ethernet Control Node
The XMC4500F100F768ACXQMA1 fits industrial Ethernet nodes because it combines an Ethernet MAC with a 120 MHz ARM Cortex-M4 core and 768 kB of flash. The MAC can handle Ethernet framing while the application processor manages control loops, diagnostics, and protocol stacks. With 160 kB of RAM, the device also has useful space for packet buffering and communication state. Designers should allocate the PHY interface according to the manufacturer reference design and verify timing, isolation, and magnetics requirements for the target network.
Disebarkan
CAN and LIN Gateway Controller
The XMC4500F100F768ACXQMA1 is appropriate for a gateway that must bridge CAN, LIN, and Ethernet traffic because all three communication types are identified for the XMC4500 family. The 120 MHz Cortex-M4 core provides processing capacity for message routing and protocol conversion, while 768 kB of flash accommodates gateway firmware, mapping tables, and diagnostics. Interface transceivers remain external requirements, so the board design must handle bus protection, termination, and galvanic isolation as appropriate for the installation.
Disebarkan
Industrial Motor and Power Controller
The XMC4500F100F768ACXQMA1 can serve as the supervisory controller in an industrial motor or power-conversion system. Its configurable mixed-signal peripheral set supports analog acquisition and timing-intensive control functions, while the 120 MHz Cortex-M4 core manages control algorithms and communication tasks. The 160 kB RAM allows meaningful working-buffer capacity for real-time data and diagnostics. Power stage design, protection features, and safety functions must be evaluated separately because the MCU is not itself a power-semiconductor driver.
Disebarkan
Factory Automation Sensor Hub
The XMC4500F100F768ACXQMA1 works well as a factory sensor hub that gathers process data and forwards it over industrial networks. Its configurable analog and mixed-signal resources can support multiple sensing channels, and the 768 kB flash provides room for calibration data, filtering algorithms, and device management software. Ethernet MAC, CAN, and LIN allow one controller to serve different levels of the plant network. Sensor excitation, analog filtering, and precision reference design should be handled according to the datasheet guidance and the required measurement accuracy.
Disebarkan
Automotive Network Terminal
The XMC4500F100F768ACXQMA1 can be considered for an automotive-style network terminal because the XMC4500 selection profile identifies CAN and LIN networking alongside mixed-signal acquisition. The 120 MHz Cortex-M4 core can supervise body or industrial vehicle functions, and 768 kB of flash leaves room for layered diagnostics and communication firmware. Vehicle-grade qualification, temperature limits, and exact interface availability must be checked against the ordering code because the industrial ordering designation does not by itself establish AEC-Q100 qualification.
Disebarkan
Real-Time Data Acquisition System
The XMC4500F100F768ACXQMA1 supports real-time acquisition systems that combine analog measurement with high-speed data handling and networked results. The 120 MHz ARM Cortex-M4 core provides deterministic control and filtering capability, and 160 kB of RAM provides a practical buffer for acquisition batches. Its Ethernet MAC allows captured data to be streamed to a host or plant server without a separate communications controller. Sampling rates, converter accuracy, anti-aliasing design, and memory transfer rates should be verified against the selected external signal chain.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk XMC4500F100F768ACXQMA1 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | XMC4500-F100F768-AC |
|---|---|---|
| Package | PG-LQFP-100-11, 14 mm x 14 mm | PG-LQFP-100-11, 14 mm x 14 mm |
| Brand | Infineon Technologies | Infineon Technologies |
| Processor Core | ARM Cortex-M4 | ARM Cortex-M4 |
| Maximum CPU Frequency | 120 MHz | 120 MHz |
| Flash Memory | 768 kB | 768 kB |
| RAM | 160 kB | 160 kB |
| Supply Voltage | 3.13 V to 3.63 V, nominal 3.3 V | 3.3 V industrial configuration |
| Ethernet Connectivity | Ethernet MAC | Ethernet MAC |
| CAN and LIN Support | CAN and LIN | CAN and LIN networking |
| Ordering Designation | XMC4500F100F768ACXQMA1 | XMC4500-F100F768-AC base designation |
Penyeberangsung Jelas
- Largest confirmed flash configuration within the directly identified XMC4500 ordering family (vsXMC4500-F100F768-AC)
- Integrated multi-protocol industrial networking (vsXMC4500-F100F768-AC)
- Substantial embedded memory for control firmware (vsXMC4500-F100F768-AC)
Catatan Desain
Design the supply network for the listed 3.13 V to 3.63 V operating range and use the voltage, decoupling, and startup conditions specified in the Infineon XMC4500 datasheet. Place high-frequency decoupling capacitors close to the device supply pins and route the exposed pad to the ground plane with low impedance. Verify the regulator's startup behavior against the requirements of the attached peripherals.
Follow the PG-LQFP-100-11 land pattern and exposed-pad recommendation in the official package information rather than deriving pad geometry from a generic LQFP drawing. Keep sensitive analog inputs away from high-current switching nodes and Ethernet or CAN routing where practical. Use a continuous ground reference beneath the device to support return currents and reduce susceptibility to digital coupling.
Do not substitute a related XMC4300, XMC4400, or other Cortex-M4 microcontroller solely by core and package count. The flash size, RAM capacity, peripheral set, alternate-function mappings, and package pinout can differ across families. Confirm the complete ordering table, memory configuration, communication peripherals, exposed-pad connection, and software driver support before authorizing a replacement.
Keep Ethernet, CAN, and LIN traces away from sensitive analog inputs and route each interface according to its external transceiver and connector requirements. Ethernet differential pairs should be length-matched and routed over a continuous reference plane, while CAN and LIN conductors require the specified termination arrangements. Validate inter-packet and radiated emissions at the assembled-product level rather than relying only on schematic review.
Maklumat Kesediaan
The distributor product listing identifies the XMC4500F100F768ACXQMA1 as RoHS compliant. AEC-Q100 qualification, REACH status, halogen-free status, lead-free status, and conflict-minerals status are not established by the available manufacturer and distributor information.