XMC4500F100F768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon
MPN: XMC4500F100F768ACXQMA1 ✓ 啟用中XMC4500F100F768ACXQMA1 概覽
A microcontroller is a programmable system-on-chip that combines a processor core, memory, and dedicated peripherals in one integrated device. The ARM Cortex-M4 core provides efficient real-time instruction execution, while the XMC4500 family adds configurable peripherals for industrial communications and mixed-signal control. This XMC4500 variant combines Ethernet MAC connectivity with CAN and LIN networking, making it suitable for connected industrial equipment.
Key device characteristics include a maximum clock frequency of 120 MHz, 768 kB of flash for firmware storage, 160 kB of SRAM for working data, and operation from a 3.3 V supply. The ordering code XMC4500F100F768ACXQMA1 identifies the 768 kB flash configuration in the LQFP-100 industrial package. The Infineon product page identifies the base XMC4500-F100F768-AC ordering designation as an industrial ARM Cortex-M4 device with Ethernet MAC.
The XMC architecture provides a configurable peripheral set that allows engineers to tailor analog, timing, communications, and digital control resources to the target application. Ethernet MAC support supports network-connected industrial nodes, while CAN and LIN interfaces enable connection to fieldbus and automotive-style vehicle networks. At 120 MHz, the Cortex-M4 core also provides sufficient performance for real-time control loops, data acquisition, and protocol handling.
Typical uses include industrial Ethernet controllers, motor and power conversion systems, factory automation equipment, CAN and LIN network nodes, and industrial sensors that require substantial local memory. The 768 kB flash capacity reduces the need for external program memory in firmware-intensive control systems, while 160 kB of RAM supports buffering and communication stacks.
When laying out the board, route the exposed-pad and ground connections according to the manufacturer land-pattern and thermal guidance in the XMC4500 datasheet. Confirm the power-supply design against the 3.13 V to 3.63 V operating range listed for this ordering code, and verify every pin function and alternate-function assignment against the package-specific pin table before routing.
This page combines manufacturer and distributor product information with practical configuration guidance, package details, sourcing information, and design considerations. The comparison and selection notes help engineers evaluate the exact XMC4500 ordering code against other Infineon XMC industrial microcontroller options while avoiding assumptions about unverified pin compatibility.
直接替換替代品,適用於 XMC4500F100F768ACXQMA1 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
XMC4500-F100F768-AC
✅ 直接替換📋 參考替代品(不在目錄中)
XMC4500F100F768ACXQMA1 最大額定值與電氣特性
| Product Type | 32-bit industrial ARM Cortex-M4 microcontroller |
| Processor Core | ARM Cortex-M4 |
| Maximum CPU Frequency | 120 MHz |
| Embedded Flash Memory | 768 kB |
| Flash Organization | 768K x 8 |
| RAM | 160 kB |
| Supply Voltage Range | 3.13 V to 3.63 V |
| Nominal Supply Voltage | 3.3 V |
| Ethernet Interface | Ethernet MAC |
| CAN Interface | CAN |
| LIN Interface | LIN |
| 封裝 | PG-LQFP-100-11, 14 mm x 14 mm |
| 腳位數 | 100 pins |
| 安裝類型 | Surface mount |
| Shipping Format | Tray |
| RoHS 狀態 | Compliant |
| Operating Voltage | 1.3 V / 3.3 V |
| Series | XMC4000 / XMC4500 |
| Analog and Control Resources | Configurable mixed-signal peripheral set |
| Manufacturer Base Ordering Designation | XMC4500-F100F768-AC |
XMC4500F100F768ACXQMA1 pg-lqfp-100-11, 14 mm x 14 mm 腳位配置指南
XMC4500F100F768ACXQMA1(pg-lqfp-100-11, 14 mm x 14 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XMC4500F100F768ACXQMA1.
請參閱 資料表 以查看完整腳位配置。
典型應用
XMC4500F100F768ACXQMA1 適用於 6 應用s: Industrial Ethernet Control Node, CAN and LIN Gateway Controller, Industrial Motor and Power Controller, Factory Automation Sensor Hub, Automotive Network Terminal, Real-Time Data Acquisition System.
Industrial Ethernet Control Node
The XMC4500F100F768ACXQMA1 fits industrial Ethernet nodes because it combines an Ethernet MAC with a 120 MHz ARM Cortex-M4 core and 768 kB of flash. The MAC can handle Ethernet framing while the application processor manages control loops, diagnostics, and protocol stacks. With 160 kB of RAM, the device also has useful space for packet buffering and communication state. Designers should allocate the PHY interface according to the manufacturer reference design and verify timing, isolation, and magnetics requirements for the target network.
推薦
CAN and LIN Gateway Controller
The XMC4500F100F768ACXQMA1 is appropriate for a gateway that must bridge CAN, LIN, and Ethernet traffic because all three communication types are identified for the XMC4500 family. The 120 MHz Cortex-M4 core provides processing capacity for message routing and protocol conversion, while 768 kB of flash accommodates gateway firmware, mapping tables, and diagnostics. Interface transceivers remain external requirements, so the board design must handle bus protection, termination, and galvanic isolation as appropriate for the installation.
推薦
Industrial Motor and Power Controller
The XMC4500F100F768ACXQMA1 can serve as the supervisory controller in an industrial motor or power-conversion system. Its configurable mixed-signal peripheral set supports analog acquisition and timing-intensive control functions, while the 120 MHz Cortex-M4 core manages control algorithms and communication tasks. The 160 kB RAM allows meaningful working-buffer capacity for real-time data and diagnostics. Power stage design, protection features, and safety functions must be evaluated separately because the MCU is not itself a power-semiconductor driver.
推薦
Factory Automation Sensor Hub
The XMC4500F100F768ACXQMA1 works well as a factory sensor hub that gathers process data and forwards it over industrial networks. Its configurable analog and mixed-signal resources can support multiple sensing channels, and the 768 kB flash provides room for calibration data, filtering algorithms, and device management software. Ethernet MAC, CAN, and LIN allow one controller to serve different levels of the plant network. Sensor excitation, analog filtering, and precision reference design should be handled according to the datasheet guidance and the required measurement accuracy.
推薦
Automotive Network Terminal
The XMC4500F100F768ACXQMA1 can be considered for an automotive-style network terminal because the XMC4500 selection profile identifies CAN and LIN networking alongside mixed-signal acquisition. The 120 MHz Cortex-M4 core can supervise body or industrial vehicle functions, and 768 kB of flash leaves room for layered diagnostics and communication firmware. Vehicle-grade qualification, temperature limits, and exact interface availability must be checked against the ordering code because the industrial ordering designation does not by itself establish AEC-Q100 qualification.
推薦
Real-Time Data Acquisition System
The XMC4500F100F768ACXQMA1 supports real-time acquisition systems that combine analog measurement with high-speed data handling and networked results. The 120 MHz ARM Cortex-M4 core provides deterministic control and filtering capability, and 160 kB of RAM provides a practical buffer for acquisition batches. Its Ethernet MAC allows captured data to be streamed to a host or plant server without a separate communications controller. Sampling rates, converter accuracy, anti-aliasing design, and memory transfer rates should be verified against the selected external signal chain.
推薦
推薦產品摘要
工程參考資料,適用於 XMC4500F100F768ACXQMA1 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XMC4500-F100F768-AC |
|---|---|---|
| Package | PG-LQFP-100-11, 14 mm x 14 mm | PG-LQFP-100-11, 14 mm x 14 mm |
| Brand | Infineon Technologies | Infineon Technologies |
| Processor Core | ARM Cortex-M4 | ARM Cortex-M4 |
| Maximum CPU Frequency | 120 MHz | 120 MHz |
| Flash Memory | 768 kB | 768 kB |
| RAM | 160 kB | 160 kB |
| Supply Voltage | 3.13 V to 3.63 V, nominal 3.3 V | 3.3 V industrial configuration |
| Ethernet Connectivity | Ethernet MAC | Ethernet MAC |
| CAN and LIN Support | CAN and LIN | CAN and LIN networking |
| Ordering Designation | XMC4500F100F768ACXQMA1 | XMC4500-F100F768-AC base designation |
主要差異化特點
- Largest confirmed flash configuration within the directly identified XMC4500 ordering family (對比XMC4500-F100F768-AC)
- Integrated multi-protocol industrial networking (對比XMC4500-F100F768-AC)
- Substantial embedded memory for control firmware (對比XMC4500-F100F768-AC)
設計說明
Design the supply network for the listed 3.13 V to 3.63 V operating range and use the voltage, decoupling, and startup conditions specified in the Infineon XMC4500 datasheet. Place high-frequency decoupling capacitors close to the device supply pins and route the exposed pad to the ground plane with low impedance. Verify the regulator's startup behavior against the requirements of the attached peripherals.
Follow the PG-LQFP-100-11 land pattern and exposed-pad recommendation in the official package information rather than deriving pad geometry from a generic LQFP drawing. Keep sensitive analog inputs away from high-current switching nodes and Ethernet or CAN routing where practical. Use a continuous ground reference beneath the device to support return currents and reduce susceptibility to digital coupling.
Do not substitute a related XMC4300, XMC4400, or other Cortex-M4 microcontroller solely by core and package count. The flash size, RAM capacity, peripheral set, alternate-function mappings, and package pinout can differ across families. Confirm the complete ordering table, memory configuration, communication peripherals, exposed-pad connection, and software driver support before authorizing a replacement.
Keep Ethernet, CAN, and LIN traces away from sensitive analog inputs and route each interface according to its external transceiver and connector requirements. Ethernet differential pairs should be length-matched and routed over a continuous reference plane, while CAN and LIN conductors require the specified termination arrangements. Validate inter-packet and radiated emissions at the assembled-product level rather than relying only on schematic review.
合規資訊
The distributor product listing identifies the XMC4500F100F768ACXQMA1 as RoHS compliant. AEC-Q100 qualification, REACH status, halogen-free status, lead-free status, and conflict-minerals status are not established by the available manufacturer and distributor information.