AD526BDZ - 4 MHz Programmable Gain Amp | Analog Devices
MPN: AD526BDZ ✓ ActiveAD526BDZ Overview
A software-programmable gain amplifier is a precision analog signal-conditioning device whose gain is selected by digital control signals. In the product hierarchy, an SPGA is a specialized amplifier IC that combines an operational amplifier, a precision resistor network, and digital gain-control logic. This integration allows one amplifier to replace multiple fixed-gain stages while supporting calibration, attenuation, range selection, and programmable measurement systems.
The AD526BDZ provides five binary gain selections of 1, 2, 4, 8, and 16. Its TTL-compatible latched inputs allow a microcontroller, parallel interface, or other digital controller to establish the operating gain. Because the amplifier, resistor network, and latched control circuitry are integrated on one monolithic IC, the device requires no external components. This simplifies implementation while reducing the number of discrete precision resistors and switching networks normally required in variable-gain front ends.
The AD526 family combines a 4 MHz -3 dB bandwidth with a 24 V/µs slew rate, allowing the amplifier to process signals substantially faster than a low-frequency precision measurement amplifier. Its specified input bias current is 50 pA and input offset voltage is 250 µV. These characteristics make it useful in data-acquisition front ends, sensor signal conditioning, laboratory instrumentation, industrial measurement systems, and analog-to-digital converter input stages.
Operation is supported from ±4.5 V to ±16.5 V, corresponding to a total supply span of 9 V to 33 V, and the specified temperature range is -40°C to +85°C. The wide bipolar supply range supports conventional analog and industrial systems while providing headroom for input and output signal excursions. The manufacturer lists the AD526BDZ as active and specifies it for tube packaging in the distributor record.
For implementation, connect the analog input to the appropriate signal and return terminals, drive the latched gain-control inputs with compatible logic, and operate the supply rails within the specified limits. Because the gain-control inputs are latched, account for the latch timing when changing gain in a sampled measurement system. Check the input and output operating ranges against the selected gain and supply voltage before applying large signals.
This product page combines the AD526 family gain architecture, operating specifications, package information, sourcing guidance, comparison criteria, and practical design notes into a compact engineering reference. It also identifies verified drop-in alternatives while distinguishing package, electrical, lifecycle, and application-selection considerations.
Drop-in alternatives for AD526BDZ — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with AD526BDZ (same form factor and footprint) — differing in Package, External Gain-Setting Components, Architecture, Amplifier Type, Product Type.
AD526BD
✅ Drop-InContact for price
View Datasheet →AD526CD
✅ Drop-InContact for price
View Datasheet →AD526CDZ
✅ Drop-InContact for price
View Datasheet →AD526ADZ
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →AD526BDZ Maximum Ratings & Electrical Characteristics
| Amplifier Type | Software-programmable gain amplifier |
| Number of Circuits | 1 circuit |
| Architecture | Single-ended monolithic SPGA |
| Programmable Gain Settings | 1, 2, 4, 8, and 16 |
| -3 dB Bandwidth | 4 MHz |
| Slew Rate | 24 V/µs |
| Input Bias Current | 50 pA |
| Input Offset Voltage | 250 µV |
| Supply Voltage Range | ±4.5 V to ±16.5 V |
| Operating Temperature Range | -40°C to +85°C |
| Gain-Control Interface | TTL-compatible latched inputs |
| External Components Required | 0 components |
| Package | 16-CDIP |
| Packaging Type | Tube |
| Lifecycle Status | Active |
AD526BDZ 16-cdip Pin Configuration Guide
Pin configuration for AD526BDZ (16-cdip package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.
No detailed pinout data available for AD526BDZ.
Refer to the datasheet for full pin configuration.
Typical Applications
AD526BDZ is suitable for 6 applications: Programmable Data-Acquisition Front End, Industrial Sensor Signal Conditioning, Laboratory Measurement Equipment, ADC Input Amplification, Audio and Communication Gain Control, Automated Test and Calibration Systems.
Programmable Data-Acquisition Front End
The AD526BDZ fits the input stage of a programmable data-acquisition system because one amplifier can select among gains of 1, 2, 4, 8, and 16 through TTL-compatible latched inputs. Its 4 MHz -3 dB bandwidth and 24 V/µs slew rate allow the device to process fast acquisition channels without changing the physical input amplifier. The integrated resistor network also eliminates external gain-selection components, simplifying the analog front end. Designers should verify each gain’s signal swing and acquisition bandwidth against the intended sensor range before programming the control logic.
Recommended
Industrial Sensor Signal Conditioning
The AD526BDZ is appropriate for industrial sensors whose output amplitude changes over a wide operating range. Selectable gains of 1, 2, 4, 8, and 16 let the controller adapt the signal level presented to an ADC without replacing the analog hardware. Its 50 pA input bias current is especially useful with high-impedance sources, while the 4 MHz bandwidth provides more signal speed than many slow precision-only amplifiers. The 16-CDIP package supports through-hole assembly in systems where ruggedized component selection and straightforward servicing are important.
Recommended
Laboratory Measurement Equipment
The AD526BDZ can provide range selection in laboratory instruments that measure signals of widely differing amplitudes. A single AD526 channel replaces separate gain stages for ratios of 1, 2, 4, 8, and 16, while the latched digital interface allows the instrument controller to select the appropriate range. The 250 µV input offset and 50 pA input bias characteristics support low-level measurement work, and the 4 MHz bandwidth supports higher-bandwidth instrumentation. System-level offset calibration should account for the selected gain when establishing measurement accuracy.
Recommended
ADC Input Amplification
The AD526BDZ is suitable as an adjustable gain stage ahead of an analog-to-digital converter when the source amplitude varies between acquisition ranges. Its programmable gains of 1 through 16 maximize the usable ADC input span, and the 4 MHz -3 dB bandwidth can serve fast conversion systems rather than only slow instrumentation channels. The 24 V/µs slew rate helps preserve large-amplitude transient behavior. The design must verify converter settling requirements, anti-alias filtering, and whether the selected AD526 gain produces adequate settling time before the next conversion.
Recommended
Audio and Communication Gain Control
The AD526BDZ can implement a digitally controlled gain section in audio, communications, or general analog test equipment where five gain ratios are sufficient. The available settings of 1, 2, 4, 8, and 16 provide coarse attenuation or amplification ahead of another converter or signal-processing stage. A 4 MHz bandwidth and 24 V/µs slew rate support fast waveform movement, while the latched inputs simplify connection to a digital control bus. Engineers should verify output swing, slew-driven distortion, and signal-ground return paths for the intended audio or communications bandwidth.
Recommended
Automated Test and Calibration Systems
The AD526BDZ is useful in automated test systems where a controller must apply predictable attenuation and amplification during calibration. Its latched gain inputs permit repeatable selection of 1, 2, 4, 8, or 16 through digital control rather than manual switch settings. The monolithic integration reduces external relay and resistor networks, improving repeatability and reducing board area. For metrology-grade measurements, characterize offset and gain error at each setting and include those results in the system calibration algorithm. The 16-CDIP format is also convenient for instrument prototypes and serviceable assemblies.
Recommended
Recommended Products Summary
Engineering reference data for AD526BDZ — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | AD526BD | AD526CD | AD526CDZ | AD526ADZ |
|---|---|---|---|---|---|
| Package | 16-CDIP | 16-CDIP | 16-CDIP | 16-CDIP | 16-CDIP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Programmable Gain Settings | 1, 2, 4, 8, and 16 | 1, 2, 4, 8, and 16 | 1, 2, 4, 8, and 16 | 1, 2, 4, 8, and 16 | 1, 2, 4, 8, and 16 |
Key Differentiators
- Provides five digitally selected gain ratios in one monolithic device (vs AD526CD)
- Combines a 4 MHz bandwidth with 24 V/µs slew rate (vs AD526CDZ)
- Uses a documented complete-replacement relationship for second sourcing (vs AD526BD)
Design Notes
Do not assume that every AD526 ordering suffix is an automatic drop-in substitute. The AD526BD is specifically described as a complete replacement for the AD526BDZ, while AD526CD, AD526CDZ, and AD526ADZ require review of package, temperature, and ordering-suffix details. Confirm pin names, package construction, electrical limits, and lifecycle status in the manufacturer datasheet before changing an approved BOM.
Keep the analog input path short and connect the signal return directly to the amplifier ground according to the pin-description table in the AD526 datasheet. The gain-control inputs are latched, so route them away from sensitive analog inputs where possible and observe the specified latch timing. For a new PCB, assign every package lead from the manufacturer pinout rather than inferring connections from the generic DIP footprint.
Treat gain changes as system-level settling events. The AD526BDZ offers gains of 1, 2, 4, 8, and 16 with a 4 MHz -3 dB bandwidth, but acquisition systems must allow sufficient time for the selected gain and downstream anti-alias network to settle before sampling. Place any required filtering according to the selected gain and highest signal frequency, and validate transient behavior with the actual source impedance and cable capacitance.
Compliance Information
The available product pages identify the active AD526 family and its electrical characteristics but do not state order-specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Obtain current compliance documentation for the exact AD526BDZ ordering code.