AD526BDZ - 4 MHz Programmable Gain Amp | Analog Devices
MPN: AD526BDZ ✓ Hoạt độngAD526BDZ Tóm tắt
A software-programmable gain amplifier is a precision analog signal-conditioning device whose gain is selected by digital control signals. In the product hierarchy, an SPGA is a specialized amplifier IC that combines an operational amplifier, a precision resistor network, and digital gain-control logic. This integration allows one amplifier to replace multiple fixed-gain stages while supporting calibration, attenuation, range selection, and programmable measurement systems.
The AD526BDZ provides five binary gain selections of 1, 2, 4, 8, and 16. Its TTL-compatible latched inputs allow a microcontroller, parallel interface, or other digital controller to establish the operating gain. Because the amplifier, resistor network, and latched control circuitry are integrated on one monolithic IC, the device requires no external components. This simplifies implementation while reducing the number of discrete precision resistors and switching networks normally required in variable-gain front ends.
The AD526 family combines a 4 MHz -3 dB bandwidth with a 24 V/µs slew rate, allowing the amplifier to process signals substantially faster than a low-frequency precision measurement amplifier. Its specified input bias current is 50 pA and input offset voltage is 250 µV. These characteristics make it useful in data-acquisition front ends, sensor signal conditioning, laboratory instrumentation, industrial measurement systems, and analog-to-digital converter input stages.
Operation is supported from ±4.5 V to ±16.5 V, corresponding to a total supply span of 9 V to 33 V, and the specified temperature range is -40°C to +85°C. The wide bipolar supply range supports conventional analog and industrial systems while providing headroom for input and output signal excursions. The manufacturer lists the AD526BDZ as active and specifies it for tube packaging in the distributor record.
For implementation, connect the analog input to the appropriate signal and return terminals, drive the latched gain-control inputs with compatible logic, and operate the supply rails within the specified limits. Because the gain-control inputs are latched, account for the latch timing when changing gain in a sampled measurement system. Check the input and output operating ranges against the selected gain and supply voltage before applying large signals.
This product page combines the AD526 family gain architecture, operating specifications, package information, sourcing guidance, comparison criteria, and practical design notes into a compact engineering reference. It also identifies verified drop-in alternatives while distinguishing package, electrical, lifecycle, and application-selection considerations.
Bộ thay thế dễ dàng lắp đặt cho AD526BDZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với AD526BDZ (cùng hình factor và footprint) — khác nhau ở Package, External Gain-Setting Components, Architecture, Amplifier Type, Product Type.
AD526BD
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →AD526CD
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →AD526CDZ
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →AD526ADZ
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →AD526BDZ Tỷ lệ tối đa & tính chất điện
| Amplifier Type | Software-programmable gain amplifier |
| Number of Circuits | 1 circuit |
| Architecture | Single-ended monolithic SPGA |
| Programmable Gain Settings | 1, 2, 4, 8, and 16 |
| -3 dB Bandwidth | 4 MHz |
| Slew Rate | 24 V/µs |
| Input Bias Current | 50 pA |
| Input Offset Voltage | 250 µV |
| Supply Voltage Range | ±4.5 V to ±16.5 V |
| Khoảng nhiệt độ hoạt động | -40°C to +85°C |
| Gain-Control Interface | TTL-compatible latched inputs |
| External Components Required | 0 components |
| Hộp | 16-CDIP |
| Packaging Type | Tube |
| Trạng thái vòng đời | Active |
Hướng dẫn cấu hình chân AD526BDZ 16-cdip
Cấu hình chân cho AD526BDZ (16-cdip gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho AD526BDZ.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
AD526BDZ phù hợp cho 6 Áp dụngs: Programmable Data-Acquisition Front End, Industrial Sensor Signal Conditioning, Laboratory Measurement Equipment, ADC Input Amplification, Audio and Communication Gain Control, Automated Test and Calibration Systems.
Programmable Data-Acquisition Front End
The AD526BDZ fits the input stage of a programmable data-acquisition system because one amplifier can select among gains of 1, 2, 4, 8, and 16 through TTL-compatible latched inputs. Its 4 MHz -3 dB bandwidth and 24 V/µs slew rate allow the device to process fast acquisition channels without changing the physical input amplifier. The integrated resistor network also eliminates external gain-selection components, simplifying the analog front end. Designers should verify each gain’s signal swing and acquisition bandwidth against the intended sensor range before programming the control logic.
Được đề xuất
Industrial Sensor Signal Conditioning
The AD526BDZ is appropriate for industrial sensors whose output amplitude changes over a wide operating range. Selectable gains of 1, 2, 4, 8, and 16 let the controller adapt the signal level presented to an ADC without replacing the analog hardware. Its 50 pA input bias current is especially useful with high-impedance sources, while the 4 MHz bandwidth provides more signal speed than many slow precision-only amplifiers. The 16-CDIP package supports through-hole assembly in systems where ruggedized component selection and straightforward servicing are important.
Được đề xuất
Laboratory Measurement Equipment
The AD526BDZ can provide range selection in laboratory instruments that measure signals of widely differing amplitudes. A single AD526 channel replaces separate gain stages for ratios of 1, 2, 4, 8, and 16, while the latched digital interface allows the instrument controller to select the appropriate range. The 250 µV input offset and 50 pA input bias characteristics support low-level measurement work, and the 4 MHz bandwidth supports higher-bandwidth instrumentation. System-level offset calibration should account for the selected gain when establishing measurement accuracy.
Được đề xuất
ADC Input Amplification
The AD526BDZ is suitable as an adjustable gain stage ahead of an analog-to-digital converter when the source amplitude varies between acquisition ranges. Its programmable gains of 1 through 16 maximize the usable ADC input span, and the 4 MHz -3 dB bandwidth can serve fast conversion systems rather than only slow instrumentation channels. The 24 V/µs slew rate helps preserve large-amplitude transient behavior. The design must verify converter settling requirements, anti-alias filtering, and whether the selected AD526 gain produces adequate settling time before the next conversion.
Được đề xuất
Audio and Communication Gain Control
The AD526BDZ can implement a digitally controlled gain section in audio, communications, or general analog test equipment where five gain ratios are sufficient. The available settings of 1, 2, 4, 8, and 16 provide coarse attenuation or amplification ahead of another converter or signal-processing stage. A 4 MHz bandwidth and 24 V/µs slew rate support fast waveform movement, while the latched inputs simplify connection to a digital control bus. Engineers should verify output swing, slew-driven distortion, and signal-ground return paths for the intended audio or communications bandwidth.
Được đề xuất
Automated Test and Calibration Systems
The AD526BDZ is useful in automated test systems where a controller must apply predictable attenuation and amplification during calibration. Its latched gain inputs permit repeatable selection of 1, 2, 4, 8, or 16 through digital control rather than manual switch settings. The monolithic integration reduces external relay and resistor networks, improving repeatability and reducing board area. For metrology-grade measurements, characterize offset and gain error at each setting and include those results in the system calibration algorithm. The 16-CDIP format is also convenient for instrument prototypes and serviceable assemblies.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho AD526BDZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | AD526BD | AD526CD | AD526CDZ | AD526ADZ |
|---|---|---|---|---|---|
| Package | 16-CDIP | 16-CDIP | 16-CDIP | 16-CDIP | 16-CDIP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Programmable Gain Settings | 1, 2, 4, 8, and 16 | 1, 2, 4, 8, and 16 | 1, 2, 4, 8, and 16 | 1, 2, 4, 8, and 16 | 1, 2, 4, 8, and 16 |
Bảo phân biệt quan trọng
- Provides five digitally selected gain ratios in one monolithic device (vsAD526CD)
- Combines a 4 MHz bandwidth with 24 V/µs slew rate (vsAD526CDZ)
- Uses a documented complete-replacement relationship for second sourcing (vsAD526BD)
Ghi chú thiết kế
Do not assume that every AD526 ordering suffix is an automatic drop-in substitute. The AD526BD is specifically described as a complete replacement for the AD526BDZ, while AD526CD, AD526CDZ, and AD526ADZ require review of package, temperature, and ordering-suffix details. Confirm pin names, package construction, electrical limits, and lifecycle status in the manufacturer datasheet before changing an approved BOM.
Keep the analog input path short and connect the signal return directly to the amplifier ground according to the pin-description table in the AD526 datasheet. The gain-control inputs are latched, so route them away from sensitive analog inputs where possible and observe the specified latch timing. For a new PCB, assign every package lead from the manufacturer pinout rather than inferring connections from the generic DIP footprint.
Treat gain changes as system-level settling events. The AD526BDZ offers gains of 1, 2, 4, 8, and 16 with a 4 MHz -3 dB bandwidth, but acquisition systems must allow sufficient time for the selected gain and downstream anti-alias network to settle before sampling. Place any required filtering according to the selected gain and highest signal frequency, and validate transient behavior with the actual source impedance and cable capacitance.
Thông tin tuân thủ
The available product pages identify the active AD526 family and its electrical characteristics but do not state order-specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Obtain current compliance documentation for the exact AD526BDZ ordering code.