AD526BDZ - 4 MHz Programmable Gain Amp | Analog Devices
부품 번호: AD526BDZ ✓ 활성AD526BDZ 개요
A software-programmable gain amplifier is a precision analog signal-conditioning device whose gain is selected by digital control signals. In the product hierarchy, an SPGA is a specialized amplifier IC that combines an operational amplifier, a precision resistor network, and digital gain-control logic. This integration allows one amplifier to replace multiple fixed-gain stages while supporting calibration, attenuation, range selection, and programmable measurement systems.
The AD526BDZ provides five binary gain selections of 1, 2, 4, 8, and 16. Its TTL-compatible latched inputs allow a microcontroller, parallel interface, or other digital controller to establish the operating gain. Because the amplifier, resistor network, and latched control circuitry are integrated on one monolithic IC, the device requires no external components. This simplifies implementation while reducing the number of discrete precision resistors and switching networks normally required in variable-gain front ends.
The AD526 family combines a 4 MHz -3 dB bandwidth with a 24 V/µs slew rate, allowing the amplifier to process signals substantially faster than a low-frequency precision measurement amplifier. Its specified input bias current is 50 pA and input offset voltage is 250 µV. These characteristics make it useful in data-acquisition front ends, sensor signal conditioning, laboratory instrumentation, industrial measurement systems, and analog-to-digital converter input stages.
Operation is supported from ±4.5 V to ±16.5 V, corresponding to a total supply span of 9 V to 33 V, and the specified temperature range is -40°C to +85°C. The wide bipolar supply range supports conventional analog and industrial systems while providing headroom for input and output signal excursions. The manufacturer lists the AD526BDZ as active and specifies it for tube packaging in the distributor record.
For implementation, connect the analog input to the appropriate signal and return terminals, drive the latched gain-control inputs with compatible logic, and operate the supply rails within the specified limits. Because the gain-control inputs are latched, account for the latch timing when changing gain in a sampled measurement system. Check the input and output operating ranges against the selected gain and supply voltage before applying large signals.
This product page combines the AD526 family gain architecture, operating specifications, package information, sourcing guidance, comparison criteria, and practical design notes into a compact engineering reference. It also identifies verified drop-in alternatives while distinguishing package, electrical, lifecycle, and application-selection considerations.
드롭인 대체품: AD526BDZ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: AD526BDZ (동일 폼 팩터 및 풋프린트) — 차이점: Package, External Gain-Setting Components, Architecture, Amplifier Type, Product Type.
AD526BD
✅ 드롭인가격 문의
데이터시트 보기 →AD526CD
✅ 드롭인가격 문의
데이터시트 보기 →AD526CDZ
✅ 드롭인가격 문의
데이터시트 보기 →AD526ADZ
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →AD526BDZ 최대 정격 & 전기적 특성
| Amplifier Type | Software-programmable gain amplifier |
| Number of Circuits | 1 circuit |
| Architecture | Single-ended monolithic SPGA |
| Programmable Gain Settings | 1, 2, 4, 8, and 16 |
| -3 dB Bandwidth | 4 MHz |
| Slew Rate | 24 V/µs |
| Input Bias Current | 50 pA |
| Input Offset Voltage | 250 µV |
| Supply Voltage Range | ±4.5 V to ±16.5 V |
| 동작 온도 범위 | -40°C to +85°C |
| Gain-Control Interface | TTL-compatible latched inputs |
| External Components Required | 0 components |
| 패키지 | 16-CDIP |
| Packaging Type | Tube |
| 수명 주기 상태 | Active |
AD526BDZ 16-cdip 핀 구성 가이드
AD526BDZ(16-cdip 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: AD526BDZ.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
AD526BDZ 적합 용도: 6 애플리케이션s: Programmable Data-Acquisition Front End, Industrial Sensor Signal Conditioning, Laboratory Measurement Equipment, ADC Input Amplification, Audio and Communication Gain Control, Automated Test and Calibration Systems.
Programmable Data-Acquisition Front End
The AD526BDZ fits the input stage of a programmable data-acquisition system because one amplifier can select among gains of 1, 2, 4, 8, and 16 through TTL-compatible latched inputs. Its 4 MHz -3 dB bandwidth and 24 V/µs slew rate allow the device to process fast acquisition channels without changing the physical input amplifier. The integrated resistor network also eliminates external gain-selection components, simplifying the analog front end. Designers should verify each gain’s signal swing and acquisition bandwidth against the intended sensor range before programming the control logic.
추천
Industrial Sensor Signal Conditioning
The AD526BDZ is appropriate for industrial sensors whose output amplitude changes over a wide operating range. Selectable gains of 1, 2, 4, 8, and 16 let the controller adapt the signal level presented to an ADC without replacing the analog hardware. Its 50 pA input bias current is especially useful with high-impedance sources, while the 4 MHz bandwidth provides more signal speed than many slow precision-only amplifiers. The 16-CDIP package supports through-hole assembly in systems where ruggedized component selection and straightforward servicing are important.
추천
Laboratory Measurement Equipment
The AD526BDZ can provide range selection in laboratory instruments that measure signals of widely differing amplitudes. A single AD526 channel replaces separate gain stages for ratios of 1, 2, 4, 8, and 16, while the latched digital interface allows the instrument controller to select the appropriate range. The 250 µV input offset and 50 pA input bias characteristics support low-level measurement work, and the 4 MHz bandwidth supports higher-bandwidth instrumentation. System-level offset calibration should account for the selected gain when establishing measurement accuracy.
추천
ADC Input Amplification
The AD526BDZ is suitable as an adjustable gain stage ahead of an analog-to-digital converter when the source amplitude varies between acquisition ranges. Its programmable gains of 1 through 16 maximize the usable ADC input span, and the 4 MHz -3 dB bandwidth can serve fast conversion systems rather than only slow instrumentation channels. The 24 V/µs slew rate helps preserve large-amplitude transient behavior. The design must verify converter settling requirements, anti-alias filtering, and whether the selected AD526 gain produces adequate settling time before the next conversion.
추천
Audio and Communication Gain Control
The AD526BDZ can implement a digitally controlled gain section in audio, communications, or general analog test equipment where five gain ratios are sufficient. The available settings of 1, 2, 4, 8, and 16 provide coarse attenuation or amplification ahead of another converter or signal-processing stage. A 4 MHz bandwidth and 24 V/µs slew rate support fast waveform movement, while the latched inputs simplify connection to a digital control bus. Engineers should verify output swing, slew-driven distortion, and signal-ground return paths for the intended audio or communications bandwidth.
추천
Automated Test and Calibration Systems
The AD526BDZ is useful in automated test systems where a controller must apply predictable attenuation and amplification during calibration. Its latched gain inputs permit repeatable selection of 1, 2, 4, 8, or 16 through digital control rather than manual switch settings. The monolithic integration reduces external relay and resistor networks, improving repeatability and reducing board area. For metrology-grade measurements, characterize offset and gain error at each setting and include those results in the system calibration algorithm. The 16-CDIP format is also convenient for instrument prototypes and serviceable assemblies.
추천
추천 제품 요약
엔지니어링 참조 데이터: AD526BDZ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | AD526BD | AD526CD | AD526CDZ | AD526ADZ |
|---|---|---|---|---|---|
| Package | 16-CDIP | 16-CDIP | 16-CDIP | 16-CDIP | 16-CDIP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Programmable Gain Settings | 1, 2, 4, 8, and 16 | 1, 2, 4, 8, and 16 | 1, 2, 4, 8, and 16 | 1, 2, 4, 8, and 16 | 1, 2, 4, 8, and 16 |
주요 차별점
- Provides five digitally selected gain ratios in one monolithic device (vs AD526CD)
- Combines a 4 MHz bandwidth with 24 V/µs slew rate (vs AD526CDZ)
- Uses a documented complete-replacement relationship for second sourcing (vs AD526BD)
설계 노트
Do not assume that every AD526 ordering suffix is an automatic drop-in substitute. The AD526BD is specifically described as a complete replacement for the AD526BDZ, while AD526CD, AD526CDZ, and AD526ADZ require review of package, temperature, and ordering-suffix details. Confirm pin names, package construction, electrical limits, and lifecycle status in the manufacturer datasheet before changing an approved BOM.
Keep the analog input path short and connect the signal return directly to the amplifier ground according to the pin-description table in the AD526 datasheet. The gain-control inputs are latched, so route them away from sensitive analog inputs where possible and observe the specified latch timing. For a new PCB, assign every package lead from the manufacturer pinout rather than inferring connections from the generic DIP footprint.
Treat gain changes as system-level settling events. The AD526BDZ offers gains of 1, 2, 4, 8, and 16 with a 4 MHz -3 dB bandwidth, but acquisition systems must allow sufficient time for the selected gain and downstream anti-alias network to settle before sampling. Place any required filtering according to the selected gain and highest signal frequency, and validate transient behavior with the actual source impedance and cable capacitance.
규정 준수 정보
The available product pages identify the active AD526 family and its electrical characteristics but do not state order-specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Obtain current compliance documentation for the exact AD526BDZ ordering code.