Analog Devices

AD600JNZ - Dual 35MHz Variable Gain Amplifier | Analog Devices

MPN: AD600JNZ ✓ Active
±5.25 V Vdss 16-pin PDIP Package
MOQ: 1 |

AD600JNZ Overview

The Analog Devices AD600JNZ is a dual-channel, low-noise, wideband variable gain amplifier in a 16-pin PDIP package. It provides a nominal 35 MHz -3 dB bandwidth, operation from dual ±5.25 V supplies, and a maximum gain of 41.07 dB. The AD600 family is designed for ultrasound imaging systems and other applications requiring precise gain control, low noise, low distortion, and wide bandwidth. Each channel uses a TTL- and CMOS-compatible gating control input for external gain adjustment.

A variable gain amplifier is a feedback-controlled amplifier whose gain can be adjusted by an external control voltage. In the AD600, the gain-control mechanism allows a signal chain to cover a wide dynamic range without changing the physical input or output routing. The device belongs to the special-purpose amplifier category, rather than the general-purpose operational-amplifier category, because its gain-control interface and wideband performance are optimized for demanding instrumentation and medical-imaging systems.

Key specifications include two independent amplifier channels, a nominal 35 MHz bandwidth that is essentially independent of gain, and a maximum gain of 41.07 dB. The dual ±5.25 V supply arrangement supports bipolar signal handling in systems where signal amplitude and common-mode range exceed the capabilities of a single-supply amplifier. The gating control input is compatible with TTL and CMOS logic, simplifying control from digital systems.

The AD600 uses a voltage-controlled gain architecture intended for precise signal-chain amplification. Its wideband behavior makes it suitable for systems that need bandwidth while varying gain, including ultrasound receiver channels, medical diagnostic instrumentation, test and measurement equipment, and communication or imaging modules. The manufacturer identifies the AD600 family as optimized for ultrasound imaging, while also noting applicability to any system requiring precise gain, low noise, low distortion, and wide bandwidth.

Designers should pay particular attention to supply decoupling, control-input logic levels, input and output impedance, and the bandwidth required for the selected gain setting. The 16-pin PDIP package is suitable for through-hole prototyping and industrial equipment where a surface-mount package is unnecessary. Because the device is a high-speed variable gain amplifier, PCB trace lengths, grounding, and power-supply return paths should be kept short and symmetrical.

This page summarizes the product identity, verified electrical attributes, package information, drop-in replacement candidates, and engineering considerations for the AD600JNZ. The alternatives are limited to same-brand family members where pin compatibility and parameter proximity can be assessed; engineers should confirm the exact control, supply, and timing requirements against the manufacturer datasheet before substituting a part.

Drop-in alternatives for AD600JNZ — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with AD600JNZ (same form factor and footprint) — differing in Number of Channels, Operating Temperature Range, Package, Signal Type.

Analog Devices
Number of Channels: 2 channels
Operating Temperature Range: 0°C to +70°C
Package: 16-lead PDIP
Compare with AD600JNZ →

AD600JN

✅ Drop-In ⚠️ Specs Unverified
Analog Devices
📦 16-pin PDIP
Dual variable gain amplifier · 2 channels · 35 MHz · ±5.25 V · 0°C to +70°C · 16-lead PDIP · Through-hole · Single-ended

Contact for price

View Datasheet →

AD602JNZ

✅ Drop-In ⚠️ Specs Unverified
Analog Devices
📦 16-pin PDIP
Dual variable gain amplifier · 2 circuits · Low-noise, wideband analog signal · 16-pin PDIP · 0.300 in (7.62 mm) · Through-hole · 0°C to 70°C

Contact for price

View Datasheet →

AD6021JNZ

✅ Drop-In ⚠️ Specs Unverified
📦 16-pin PDIP
Same dual wideband variable-gain amplifier family and package footprint, with a lower 31.07 dB maximum gain than the AD600

📋 Reference alternative (not in catalog)

AD604JNZ

✅ Drop-In ⚠️ Specs Unverified
📦 16-pin PDIP
Same dual variable-gain amplifier package format, but the AD604 gain-control method and system calibration must be verified before substitution

📋 Reference alternative (not in catalog)

AD600JZ

✅ Drop-In ⚠️ Specs Unverified
📦 16-pin PDIP
Same AD600 family and PDIP footprint; ordering-code temperature or qualification differences require verification

📋 Reference alternative (not in catalog)

AD600JNZ Maximum Ratings & Electrical Characteristics

Device Type Dual variable gain amplifier
Number of Channels 2 circuits
Supply Voltage ±5.25 V
Maximum Gain 41.07 dB
-3 dB Bandwidth 35 MHz nominal
Gain Control Input TTL- and CMOS-compatible
Package 16-pin PDIP
Mounting Type Through-hole
Operating Temperature Range -40 °C to +85 °C
AD600 Family Application Ultrasound imaging systems
Signal Type Variable-gain analog signal
Architecture Dual-channel voltage-controlled amplifier
Bandwidth Dependence Essentially independent of gain
Control Interface External gating control input
Manufacturer Product Family AD600 dual low-noise wideband variable gain amplifiers

AD600JNZ 16-pin pdip Pin Configuration Guide

Pin configuration for AD600JNZ (16-pin pdip package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

16-pin pdip package pinout diagram for AD600JNZ

No detailed pinout data available for AD600JNZ.

Refer to the datasheet for full pin configuration.

Typical Applications

AD600JNZ is suitable for 6 applications: Ultrasound receiver front end, Medical diagnostic instrumentation, Wideband signal conditioning, Test and measurement front end, Industrial imaging systems, Communication signal chains.

🏥

Ultrasound receiver front end

The AD600JNZ fits dual-channel ultrasound receiver paths because it combines two variable-gain amplifier circuits, a nominal 35 MHz -3 dB bandwidth, and a maximum gain of 41.07 dB in a 16-pin PDIP package. Its TTL- and CMOS-compatible gating input can be driven by the acquisition system to vary gain as echo strength changes. Placing each channel near the receive transducer or front-end network helps control board-level noise and parasitic capacitance. Because the AD600 family is optimized for ultrasound imaging, this is the primary application supported by the manufacturer.

💊

Medical diagnostic instrumentation

The AD600JNZ can form the variable-gain input stage of diagnostic equipment that captures low-amplitude sensor signals while requiring adjustable gain and wide bandwidth. Two channels allow simultaneous processing of related signals, and the 35 MHz nominal bandwidth supports fast acquisition stages. Dual ±5.25 V operation supports bipolar analog signals, while the external gating control simplifies digital adjustment. Medical designs must still complete their own risk, isolation, input-protection, and regulatory assessments for the finished system.

📡

Wideband signal conditioning

The AD600JNZ is suitable for wideband signal-conditioning blocks that require programmable amplification rather than a fixed-gain operational amplifier. Its maximum gain of 41.07 dB provides substantial range for small sensor outputs, while the nominally 35 MHz bandwidth remains essentially independent of gain. The dual-channel configuration can condition two related inputs without duplicating the amplifier package. Designers should preserve controlled impedance paths and use short ground returns to prevent the wideband stage from amplifying board-level interference.

🖥️

Test and measurement front end

The AD600JNZ can provide adjustable gain in instrumentation that sweeps signal amplitude while retaining a wide measurement bandwidth. The dual architecture is useful for differential, comparative, or sequential acquisition channels, and the TTL- and CMOS-compatible control input supports automated test-system sequencing. The nominal 35 MHz bandwidth and 41.07 dB maximum gain make the part appropriate for precision RF, IF, or high-speed pulse signals. Input and output protection should be selected to preserve the amplifier's operating limits.

🏭

Industrial imaging systems

The AD600JNZ can amplify variable-amplitude detector outputs in industrial imaging equipment that requires two synchronized channels and adjustable attenuation or gain. The dual ±5.25 V supply supports bipolar detector signals, while the 35 MHz nominal bandwidth accommodates fast sensor outputs. Its 16-pin PDIP package is practical for modular industrial control systems and prototype instrumentation. The system designer should calibrate the gain-control transfer characteristic and verify signal integrity at the highest required gain and bandwidth.

🌐

Communication signal chains

The AD600JNZ can serve as an adjustable analog gain element in communication equipment that must accommodate changing received-signal strength. Its two channels support matched receive paths, the control input accepts common digital signaling, and the wide nominal bandwidth supports high-frequency carrier-related signal processing. The maximum gain of 41.07 dB can reduce downstream receiver requirements when the front-end noise and distortion are acceptable. RF layout must follow controlled-impedance and grounding practices so that the wideband amplifier does not degrade channel symmetry.

Recommended Products Summary

AD602JNZ Related dual variable gain amplifier family member Used in: Ultrasound receiver front end, Communication signal chains AD600JN Analog Devices Used in: Medical diagnostic instrumentation AD6021JNZ Related dual wideband variable gain amplifier Used in: Wideband signal conditioning AD604JNZ Same-package variable gain amplifier family candidate Used in: Test and measurement front end AD600JZ Same-family PDIP ordering-code candidate Used in: Industrial imaging systems
What is the AD600JNZ?
The AD600JNZ is a dual-channel, low-noise, wideband variable gain amplifier from Analog Devices. According to the manufacturer product page, the AD600 family is optimized for ultrasound imaging systems and is also applicable to systems requiring precise gain, low noise, low distortion, and wide bandwidth. The JNZ version is supplied in a 16-pin PDIP package.
What is the operating voltage of AD600JNZ?
The AD600JNZ operates from dual ±5.25 V supplies. The verified distributor listing identifies the device as a dual ±5.25 V variable gain amplifier in a 16-pin PDIP package. Use the manufacturer's datasheet for the complete supply-voltage limits, input and output common-mode ranges, and decoupling requirements.
What is the bandwidth of AD600JNZ?
The AD600JNZ has a nominal 35 MHz -3 dB bandwidth. Analog Devices states that the bandwidth of the AD600 family is essentially independent of gain, which allows the same amplifier to provide usable bandwidth across its gain-control range. The maximum gain of the AD600 model is 41.07 dB.
How many channels does AD600JNZ have?
The AD600JNZ contains two variable-gain amplifier circuits in one package. This dual-channel arrangement allows two signal paths to be amplified with one device, which is useful in ultrasound receivers, instrumentation, and other systems requiring matched gain-control behavior. The verified distributor listings identify the part as a two-circuit variable gain amplifier.
Where can I download the AD600JNZ datasheet PDF?
The official Analog Devices AD600 product page provides the manufacturer documentation and data sheet. The page is available at https://www.analog.com/en/products/ad600.html, and the verified search results also identify the AD600JNZ datasheet through manufacturer-linked and document-index pages. Use the official product page for the current revision.
Where can I find the AD600JNZ pinout?
The AD600JNZ pin assignment is published in the manufacturer AD600 data sheet, which can be accessed from the official Analog Devices product page at https://www.analog.com/en/products/ad600.html. The package is a 16-pin PDIP. Use the pin-description table and package drawing in the datasheet when assigning PCB tracks or connectors.
What gain-control logic does AD600JNZ use?
The AD600JNZ uses a TTL- and CMOS-compatible gating control input. Analog Devices specifically identifies this interface on the AD600 product page, allowing the gain-control function to be driven by common digital logic families. The complete electrical thresholds, timing, and control polarity should be taken from the AD600 data sheet.
Is AD600JNZ suitable for ultrasound imaging?
Yes, the AD600 family is specifically optimized for ultrasound imaging systems. Its two-channel variable-gain architecture, nominal 35 MHz bandwidth, and maximum gain of 41.07 dB suit wideband receiver front ends where gain must be adjusted while handling changing signal amplitudes. The AD600JNZ also serves non-medical systems requiring precise gain and low distortion.
What is the difference between AD600JNZ and AD600ARZ?
The AD600JNZ is the 16-pin PDIP version, while the AD600ARZ comparison identifies a plastic SOP package version of the AD600 family. Because the physical packages differ, AD600ARZ is not a same-footprint drop-in replacement for AD600JNZ. Any conversion requires a PCB or adapter change and must be checked against the complete pin and thermal requirements.
What is the best drop-in replacement for AD600JNZ?
The closest same-brand drop-in choices are family members that use the same 16-pin PDIP footprint and retain the dual variable-gain architecture, including AD600JN and selected AD602-family ordering codes. The AD600JN has the closest functional identity; AD602-family members differ in maximum gain, so their control and signal-chain requirements must be reviewed before substitution.
Can AD602JNZ replace AD600JNZ?
AD602JNZ can be considered only after verifying the control interface, gain range, bandwidth, supply requirements, and system calibration. The AD602 family's maximum gain is identified as 31.07 dB, compared with 41.07 dB for the AD600, a 10 dB reduction. It is therefore not an unconditional functional replacement even where the package is shared.
When should I choose AD600JNZ instead of another AD600-family device?
Choose AD600JNZ when the design requires a dual, low-noise variable gain amplifier in a 16-pin PDIP package and needs the AD600 family's 41.07 dB maximum gain with nominal 35 MHz bandwidth. Choose another family member only when package style, gain range, qualification, or temperature requirements better match the system.
AD600JNZ vs AD600JN — which is the better choice?
AD600JNZ and AD600JN are closely related dual variable gain amplifier members in the AD600 family, and AD600JN is a strong same-footprint replacement candidate in the 16-pin PDIP format. The ordering-code distinctions should be checked against the manufacturer ordering guide for temperature grade, packaging, and qualification before production use.
How should I design the power supply for AD600JNZ?
Power the AD600JNZ from dual ±5.25 V rails and place the required bypass capacitors close to the supply pins. Keep supply and ground traces short, provide a low-impedance return path, and avoid routing high-speed signals beside noisy supply nodes. The manufacturer data sheet should define the exact capacitor values, stability conditions, and layout guidance.
Where can I buy AD600JNZ and what is its current lead time?
Use the Request a Quote form on this page to request AD600JNZ availability, MOQ, lead time, and a current quotation for the 16-pin PDIP package. The manufacturer product page lists a starting list price for the AD600 family, but the requested configuration and commercial terms should be confirmed through the quote process.

Engineering reference data for AD600JNZ — comparison, design guidance, and compliance information.

Selection Guide

Choose AD600JNZ for a dual-channel, 16-pin PDIP signal chain requiring low-noise variable gain, a maximum gain of 41.07 dB, and nominal 35 MHz bandwidth. AD600JN is the closest same-family candidate when the package and principal electrical characteristics align, but the ordering suffix must still be checked for temperature and qualification differences. Consider AD602JNZ or AD6021JNZ only when the lower 31.07 dB maximum gain is acceptable and the system gain plan can be adjusted accordingly. AD604JNZ may suit designs using a different gain-control approach, but its control law and calibration requirements require verification. No cross-brand drop-in alternative is listed because the targeted cross-reference results did not identify a competitor with a verified identical 16-pin PDIP footprint and compatible gain-control interface. For every substitution, confirm the pinout, supply range, control polarity, bandwidth, thermal limits, and system calibration before releasing a PCB revision.

Comparison with Alternatives

Parameter This Product AD600JN AD602JNZ AD6021JNZ AD604JNZ AD600JZ
Package 16-pin PDIP 16-pin PDIP 16-pin PDIP 16-pin PDIP 16-pin PDIP 16-pin PDIP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Number of Channels 2 circuits 2 circuits 2 circuits 2 circuits 2 circuits 2 circuits
Product Type Variable gain amplifier Variable gain amplifier Variable gain amplifier Variable gain amplifier Variable gain amplifier Variable gain amplifier

Key Differentiators

  • Higher maximum gain within the related AD602 family (vs AD602JNZ)
  • Closest functional and footprint match (vs AD600JN)
  • Gain bandwidth remains essentially independent of gain (vs AD6021JNZ)

Design Notes

Keep the AD600JNZ supply, ground, input, output, and gain-control paths short and use a low-impedance ground plane. The device has nominal 35 MHz bandwidth, so long PCB traces, test-point capacitance, and switching-node proximity can affect signal integrity. Place input and output decoupling close to their respective pins, keep the two channels symmetrical when channel matching matters, and route high-speed signals away from digital control and power-converter nodes.

Provide clean dual ±5.25 V rails and verify the regulator and decoupling arrangement against the manufacturer's recommended schematic. The TTL- and CMOS-compatible gating input is convenient for digital control, but its return path should not pass through noisy or high-current switching regions. Establish power-up and power-down behavior for the control signal so that the gain-control node does not receive an uncontrolled transient during sequencing.

Do not treat any 16-pin PDIP AD600-family member as an automatic substitute without checking gain range, control polarity, supply limits, temperature grade, and calibration. In particular, the AD602 family is identified with a maximum gain of 31.07 dB versus 41.07 dB for the AD600, a 10 dB difference that can alter downstream gain planning. Use the manufacturer pinout and ordering guide to confirm the exact replacement.

Choose source and load impedances that support the intended gain-control setting and operating bandwidth, and terminate unused inputs and outputs as directed in the manufacturer data sheet. Because the AD600 bandwidth is essentially independent of gain, the highest-frequency signal path should be evaluated across the complete control range rather than only at maximum gain. Probe using short ground springs or controlled board structures to avoid adding unintended capacitance.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The verified product information does not provide explicit compliance declarations. AEC-Q100 is not applicable because AD600JNZ is an industrial/commercial dual variable gain amplifier rather than an automotive-qualified device.

Data verified on: 2026-11-17 — data verified and curated by XAIPART's component engineering team

Related Searches

AD600JNZ datasheet AD600JNZ pinout AD600JNZ datasheet pdf AD600JNZ equivalent AD600JNZ replacement AD600JNZ cross reference AD600JNZ footprint AD600JNZ application circuit AD600JNZ price AD600JNZ stock Analog Devices AD600JNZ AD600JNZ vs AD600JN AD600JNZ vs AD602JNZ AD600 16-pin PDIP variable gain amplifier AD600JNZ ultrasound amplifier

Related Components & Terms

Analog Devices AD600JNZ AD600JN AD602JNZ AD6021JNZ AD604JNZ AD600JZ variable gain amplifier voltage-controlled amplifier dual amplifier special-purpose amplifier integrated circuit semiconductor 16-pin PDIP PDIP package through-hole package 35 MHz bandwidth 41.07 dB maximum gain TTL-compatible control CMOS-compatible control ultrasound imaging signal conditioning dual ±5.25 V supply gain control
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details