AD8015ARZ - 240MHz Differential TIA | Analog Devices
部品番号: AD8015ARZ ✓ 生産中AD8015ARZ 概要
A transimpedance amplifier, or TIA, is an amplifier that converts a small input current into an output voltage. A photodiode generates current when illuminated by an optical carrier, while a TIA converts that current into a voltage suitable for further amplification, threshold detection, or digitization. The TIA belongs to the amplifier IC hierarchy and supports optical communication, monitoring, sensing, and instrumentation systems.
The AD8015 combines wide bandwidth, low noise, and differential output in one integrated circuit. Its 240 MHz bandwidth supports FDDI receivers and SONET/SDH receivers operating at data rates up to 155 Mbps. Differential output can reduce sensitivity to common-mode noise when the receiver is connected to a balanced clock, comparator, or analog-to-digital converter. The single-supply architecture simplifies system implementation compared with a dual-supply photodiode front end.
At the electrical level, the device is intended to combine a wideband current-to-voltage conversion stage with a differential output stage. The 500 ps pulse-width capability and 1.5 ns rise and fall times indicate very fast transient behavior, which helps preserve short optical pulse shapes. Its 8-pin SOIC package supports conventional surface-mount assembly, although high-speed layout demands short signal paths and careful return-plane management.
Typical applications include 155 Mbps SONET/SDH optical receivers, FDDI optical network interfaces, high-speed optical communication modules, and photodiode-based light measurement circuits. The differential output is particularly useful when the next stage can accept balanced signaling or when reducing common-mode pickup is a priority. The device can also support industrial optical sensing when the optical and electrical bandwidth requirements align with its operating characteristics.
The critical design consideration is parasitic control. Photodiode capacitance, feedback resistance, package inductance, and PCB capacitance can alter the effective bandwidth and stability of the transimpedance stage. Use the manufacturer pin description and recommended application circuit when assigning PCB connections, and keep the photodiode and feedback network close to the amplifier.
This page combines device specifications, pin-assignment guidance, practical fiber-optic design considerations, and technically constrained replacement options. It also distinguishes true drop-in candidates from functional alternatives that would require circuit or package changes.
ドロップイン代替品: AD8015ARZ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: AD8015ARZ (同一形状・フットプリント) — 相違点: Package, Primary Application, Amplifier Type, AEC-Q100 Qualification, REACH Status.
AD8017ARZ
✅ ドロップイン価格はお問い合わせください
データシートを見る →AD8016ARB
✅ ドロップイン価格はお問い合わせください
データシートを見る →AD8014ARZ
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →AD8018ARZ
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →AD8015ARZ 最大定格&電気的特性
| Product Type | Single-supply differential-output transimpedance amplifier |
| Bandwidth | 240 MHz |
| Supported Data Rate | Up to 155 Mbps |
| Pulse Width | 500 ps |
| 立ち上がり時間 | 1.5 ns |
| 立ち下がり時間 | 1.5 ns |
| 出力構成 | Differential voltage |
| Input Type | Photodiode current input |
| Supply Configuration | Single supply |
| パッケージ | 8-pin SOIC |
| 実装タイプ | Surface mount |
| Primary Application | Fiber-optic receiver |
| Optical Protocol Application | FDDI receiver |
| Telecommunications Application | SONET/SDH receiver |
AD8015ARZ 8-pin soic ピン配置ガイド
AD8015ARZ (8-pin soic パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: AD8015ARZ.
詳細は データシート をご参照ください。
主な用途
AD8015ARZ の用途: 6 件s: SONET/SDH Optical Receiver, FDDI Fiber-Optic Interface, High-Speed Optical Communication Module, Optical Light-Level Measurement, Industrial Optical Sensing, Optical Pulse Capture and Analysis.
SONET/SDH Optical Receiver
The AD8015ARZ fits a 155 Mbps-class SONET/SDH receiver because its 240 MHz bandwidth and 1.5 ns rise and fall times can process the edges of short optical pulses. Place the device in the photodiode front end so the incoming photocurrent becomes a differential voltage for downstream clock recovery or decision circuitry. The main design trade-off is that the 500 ps pulse-width capability does not eliminate the need for controlled PCB parasitics, so the photodiode, feedback network, and amplifier inputs should be closely coupled.
おすすめ
FDDI Fiber-Optic Interface
The AD8015ARZ is suitable for an FDDI receiver front end because the Analog Devices manufacturer datasheet identifies 240 MHz bandwidth and operation up to 155 Mbps as key capabilities. Its differential output provides a balanced signal for compatible downstream stages, while the single-supply arrangement simplifies system partitioning. For an FDDI design, verify the receiver's required bandwidth, allowable jitter, photodiode capacitance, and clock or data threshold circuitry before fixing the system bandwidth.
おすすめ
High-Speed Optical Communication Module
The AD8015ARZ can serve as the analog entry point in a high-speed optical communication module, converting weak photodiode current into a differential voltage before further processing. Its 240 MHz bandwidth provides margin for 155 Mbps-class links, and the 1.5 ns edge response supports short pulse reconstruction. Differential signaling is useful when the receiver board includes long interconnects or a downstream converter with balanced inputs, although module designers must balance bandwidth against photodiode capacitance and feedback stability.
おすすめ
Optical Light-Level Measurement
The AD8015ARZ can convert a photodiode signal into a differential measurement voltage for laboratory, industrial, or instrumentation systems that require fast optical response. Its 240 MHz bandwidth supports measurement of rapid optical events rather than only static light levels. The differential output can improve rejection of common-mode pickup when paired with balanced conversion circuitry, while the single-supply operation simplifies instrumentation front ends. Choose the photodiode and feedback values based on the expected current range and required temporal resolution.
おすすめ
Industrial Optical Sensing
The AD8015ARZ is suitable for industrial optical-sensing systems that detect fast modulation on a reflected or transmitted light path. Its 240 MHz bandwidth and 1.5 ns rise and fall times can preserve high-frequency intensity information, while differential output supports cleaner signal capture in electrically noisy environments. For industrial use, validate the operating-temperature range, supply tolerances, photodiode response, and environmental isolation requirements. A single-supply TIA also helps reduce the number of rails required around a compact sensor head.
おすすめ
Optical Pulse Capture and Analysis
The AD8015ARZ can form the input stage of a system that captures and analyzes short optical pulses because the device supports 500 ps pulse-width performance and 1.5 ns transitions. The differential voltage output can feed a suitable comparator, clocked sampler, or analysis channel without first converting the photodiode current to a single-ended signal. The practical limit is often the photodiode capacitance and physical interconnect, not the nominal amplifier bandwidth, so layout validation and bandwidth measurement remain essential.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: AD8015ARZ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | AD8017ARZ | AD8016ARB | AD8014ARZ | AD8018ARZ |
|---|---|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Product Type | Single-supply transimpedance amplifier | Transimpedance amplifier | Transimpedance amplifier | Transimpedance amplifier | Transimpedance amplifier |
| Primary Application | Fiber-optic receiver | Optical receiver | Optical receiver | Optical receiver | Optical receiver |
主な差別化要因
- Provides adequate bandwidth for 155 Mbps-class optical links (vs AD8016ARB)
- Lower bandwidth than the highest-speed same-family option (vs AD8014ARZ)
- Higher bandwidth than the lower-bandwidth family option (vs AD8018ARZ)
- Complete differential transimpedance function in one device (vs OPA875)
設計ノート
Keep the photodiode connection, feedback element, and AD8015ARZ input nodes physically short. At 240 MHz, PCB capacitance and inductance can materially alter the transimpedance response, and photodiode capacitance can reduce stability. Follow the manufacturer application circuit, use an uninterrupted ground reference, and route differential outputs as a balanced pair.
Place the supply bypass capacitor adjacent to the amplifier's supply and ground pins, using the connection arrangement shown in the Analog Devices manufacturer datasheet. Keep the return current from the bypass network out of the photodiode input path. Confirm the actual supply range, quiescent current, and allowable supply ripple before selecting the regulator.
Treat the differential output as a high-speed balanced signal rather than two unrelated single-ended outputs. Match the pair through the PCB and connector path, maintain consistent spacing over transitions, and terminate appropriately according to the downstream receiver. If output ringing appears, inspect package parasitics, connector discontinuities, and probe loading before attributing it to the amplifier.
Do not assume that the nominal 240 MHz bandwidth guarantees a usable 155 Mbps receiver response. The complete optical path includes the photodiode capacitance, feedback impedance, amplifier stability, noise, jitter, and downstream circuitry. Verify the complete channel with the selected photodiode and layout because substituting a higher-bandwidth family member may change noise, gain, stability, and power characteristics.
コンプライアンス情報
The exact-ordering-code compliance declarations must be confirmed using current Analog Devices product documentation and material-declaration records.