Analog Devices

AD9622AN - Wideband Voltage Feedback Amplifier | Analog Devices

MPN: AD9622AN ✓ Active
±5.5 V Vdss 8-pin PDIP Package
MOQ: 1 |

AD9622AN Overview

The Analog Devices AD9622AN is a wideband voltage-feedback operational amplifier supplied in an 8-pin PDIP package. The device is identified in the manufacturer documentation as a very-high-speed, wide-bandwidth amplifier family member and is suitable for applications requiring fast settling, high slew rate, and low-noise signal amplification. Its single-amplifier architecture is intended for analog signal conditioning, instrumentation, communications, and high-speed feedback networks.

An operational amplifier, or op amp, is an active analog component that uses high open-loop gain and negative feedback to amplify small voltage differences. In a practical circuit, the op amp is connected to external resistors or capacitors that determine gain, bandwidth, and filtering behavior. The AD9622AN belongs to the amplifier IC hierarchy: operational amplifier, analog amplifier, linear amplifier, and semiconductor.

The AD9622AN uses a voltage-feedback architecture, where the feedback network controls the closed-loop response. Compared with current-feedback amplifiers, voltage-feedback amplifiers commonly provide a more straightforward gain-setting method and strong performance in inverting and non-inverting gain configurations. The manufacturer describes the AD9622 family as a very high-speed, wide bandwidth amplifier family, making the part relevant to precision signal conditioning and video, communications, and test-and-measurement signal paths.

The AD9622AN is specified for operation from a nominal ±5.5 V supply according to distributor specification listings. The exact input-voltage range, output-voltage swing, gain-bandwidth product, slew rate, input-noise voltage, input-offset voltage, and quiescent-current values should be confirmed in the manufacturer datasheet before final circuit release.

The through-hole PDIP package provides a practical option for laboratory prototypes, legacy instrumentation, educational platforms, and designs where through-hole assembly is preferred. Its 8-pin arrangement supports the standard single operational-amplifier connection, with dedicated supply, input, and output terminals.

Typical applications include high-speed analog signal conditioning, communications receivers, video amplification, active filters, pulse-shaping networks, and test equipment. The wideband voltage-feedback architecture makes the AD9622AN a candidate where signal fidelity and bandwidth are more important than low quiescent current or micropower operation.

For layout, keep the feedback components and signal traces short, place compensation and decoupling capacitors close to the device pins, and provide a low-impedance ground return. Verify stability, output swing, and bandwidth in the intended gain configuration against the manufacturer’s application guidance.

Drop-in alternatives for AD9622AN — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

AD9622AN

✅ Drop-In
Analog Devices
📦 8-pin PDIP
Single operational amplifier · Voltage feedback · ±5.5 V · 8-pin PDIP · 8 · Through-hole · Rectangular · Industrial

Contact for price

View Datasheet →

AD9622BN

✅ Drop-In ⚠️ Specs Unverified
📦 8-pin PDIP
Same AD9622 family and PDIP footprint; ordering-code and availability details require confirmation before substitution

📋 Reference alternative (not in catalog)

AD9622AR

✅ Drop-In ⚠️ Specs Unverified
📦 8-pin PDIP
Same AD9622 family voltage-feedback amplifier; package and suffix details must be confirmed against the manufacturer datasheet

📋 Reference alternative (not in catalog)

AD9622DN

✅ Drop-In ⚠️ Specs Unverified
📦 8-pin PDIP
Same AD9622 family family-level ordering option; exact pin, grade, and electrical equivalence require manufacturer confirmation

📋 Reference alternative (not in catalog)

AD9622FN

✅ Drop-In ⚠️ Specs Unverified
📦 8-pin PDIP
Same AD9622 family and PDIP-style footprint; verify the suffix-specific temperature grade and lifecycle status before use

📋 Reference alternative (not in catalog)

AD9622AN Maximum Ratings & Electrical Characteristics

Product Type Single operational amplifier
Architecture Voltage feedback
Supply Voltage ±5.5 V
Package 8-pin PDIP
Terminal Count 8
Mounting Type Through-hole
Package Shape Rectangular
Temperature Grade Industrial
Application Category Wideband voltage-feedback amplifier

AD9622AN rectangular Pin Configuration Guide

Pin configuration for AD9622AN (rectangular package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

rectangular package pinout diagram for AD9622AN

No detailed pinout data available for AD9622AN.

Refer to the datasheet for full pin configuration.

Typical Applications

AD9622AN is suitable for 6 applications: High-Speed Analog Signal Conditioning, Communications Receiver Front End, Video Signal Amplification, Active Filter and Equalization Networks, Pulse and Waveform Shaping, Laboratory Instrumentation and Test Equipment.

⚡

High-Speed Analog Signal Conditioning

The AD9622AN is a candidate for conditioning low-level analog signals in instrumentation and communications equipment because the AD9622 family uses a wideband voltage-feedback architecture. The amplifier can be placed in a non-inverting or inverting gain stage ahead of an ADC, comparator, or measurement front end. Its industrial-grade listing supports industrial designs, while the exact input common-mode range, output swing, bandwidth, and slew rate must be confirmed in the datasheet. Short feedback traces and local decoupling are essential for maintaining stability in a high-speed layout.

🌐

Communications Receiver Front End

The AD9622AN can be evaluated for communications receiver paths where a fast voltage-feedback amplifier is needed to amplify a received waveform before demodulation, filtering, or conversion. Its wideband voltage-feedback positioning supports signal paths where phase and settling behavior matter more than micropower consumption. Use the manufacturer’s gain, bandwidth, noise, and output-swing limits to select the feedback network. Keep the RF or baseband input trace short and terminate or bias the input exactly as recommended for the intended operating frequency.

📺

Video Signal Amplification

The AD9622AN is applicable to video signal amplification and active analog video conditioning when the circuit requires more bandwidth than a general-purpose precision op amp. The voltage-feedback architecture allows the closed-loop gain to be set with external resistors and is suitable for inverting, non-inverting, and filtering configurations. Designers should confirm video bandwidth, gain flatness, output drive, and settling performance for the specific resolution and standard used. A compact layout and controlled grounding are necessary because long PCB traces can reduce performance or create oscillation.

🔧

Active Filter and Equalization Networks

The AD9622AN can be used in active low-pass, high-pass, or band-pass filter sections where the amplifier must operate with external feedback components and preserve signal amplitude. Its wideband voltage-feedback architecture provides a useful platform for equalization and frequency shaping in analog test and communications equipment. The exact usable bandwidth and stability margin depend on the selected closed-loop gain and component values, so the circuit must be checked against the manufacturer’s application guidance. Place filter resistors and capacitors close to the inverting-input node to minimize parasitic feedback paths.

📡

Pulse and Waveform Shaping

The AD9622AN is a reasonable candidate for amplifying and shaping pulsed or transient analog waveforms in laboratory and industrial test systems. The device’s high-speed voltage-feedback positioning supports applications where the signal must be reproduced with controlled rise time and adequate settling. The designer should use the manufacturer’s slew-rate, output-swing, overload-recovery, and stability data to establish the usable amplitude and bandwidth. Terminate unused inputs according to the datasheet and keep the feedback network compact.

🖥️

Laboratory Instrumentation and Test Equipment

The AD9622AN fits legacy-style laboratory instrumentation where a through-hole 8-pin PDIP operational amplifier is convenient for prototyping and repair. It can be used in gain stages, buffer-like configurations, and analog measurement chains for low-frequency or moderate-bandwidth signals. The 8-pin PDIP format simplifies manual assembly and socket-based prototyping, although the exact operating-temperature limits and electrical characteristics should be reviewed before production release. A stable reference layout, local bypass capacitors, and careful grounding are more important than board area in this application.

What is the AD9622AN?
The AD9622AN is a single wideband voltage-feedback operational amplifier from Analog Devices, packaged in an 8-pin PDIP. The manufacturer describes the AD9622 family as very-high-speed, wide-bandwidth amplifiers, while distributor specification listings identify the AD9622AN as operating from ±5.5 V with a through-hole PDIP package. It is suited to fast analog signal-conditioning and feedback applications.
What is the supply voltage of the AD9622AN?
The AD9622AN is listed with a nominal supply voltage of ±5.5 V. This means that the circuit should provide positive and negative analog rails around 5.5 V for nominal operation. Confirm the absolute maximum supply rating, allowable rail combinations, and input/output common-mode limits in the manufacturer datasheet before finalizing the power architecture.
Does the AD9622AN use a voltage-feedback architecture?
Yes, the AD9622AN uses a voltage-feedback architecture. The manufacturer describes the AD9622 as part of a very-high-speed, wide-bandwidth voltage-feedback amplifier family. Voltage feedback allows the closed-loop gain and signal path to be defined with external resistors, while the amplifier provides high open-loop gain and fast dynamic response.
What package does the AD9622AN use?
The AD9622AN is supplied in an 8-pin PDIP package and is intended for through-hole assembly. The package has eight terminals and a rectangular body. Because the package is a legacy-style through-hole format, verify the exact pin numbering and land pattern against the AD9622 datasheet before placing it on a PCB.
Is the AD9622AN suitable for high-speed signal conditioning?
The AD9622AN is intended for high-speed analog signal conditioning because the AD9622 family is characterized as a very-high-speed, wide-bandwidth amplifier family. It can be evaluated for communications receivers, video paths, active filtering, instrumentation, and pulse-signal conditioning. Exact bandwidth, slew-rate, noise, and stability limits must be taken from the manufacturer datasheet for the selected gain configuration.
Where can I download the AD9622AN datasheet?
The AD9622AN datasheet and product information can be accessed through the Analog Devices documentation link listed on this page and through the manufacturer-linked AD9622 datasheet result. Use the manufacturer document for authoritative pin assignments, electrical characteristics, application circuits, and recommended operating conditions. The public AD9622AN datasheet result is also available from the datasheet mirror linked in the page sources.
Where can I find the AD9622AN pinout?
The AD9622AN pinout is found in the pin-configuration section of the Analog Devices AD9622 datasheet. The device uses eight terminals in a PDIP package, including the supply rails, non-inverting input, inverting input, and output. Use the manufacturer’s pin diagram for the authoritative numbering, especially when the circuit is assembled as a through-hole design.
How do I use the AD9622AN as a non-inverting amplifier?
Connect the signal to the non-inverting input, return the inverting input to the amplifier network, and use the output as the amplified signal. The closed-loop gain is normally set with external resistors, while the manufacturer datasheet should define the suitable resistor values, gain limits, and stability behavior. Add local supply bypassing and route the feedback loop with minimal parasitic capacitance.
What is the difference between the AD9622AN and other AD9622 package options?
The AD9622AN is the PDIP package option, while other AD9622 ordering codes may use different package or grade suffixes. The electrical function remains within the AD9622 family, but package type, pin configuration, temperature grade, and ordering conditions can differ. Select a replacement only after confirming that the suffix provides the same package, pinout, supply requirements, and rated operating range.
What can replace the AD9622AN?
A valid drop-in replacement must match the AD9622AN’s 8-pin PDIP footprint, pin assignments, supply arrangement, voltage-feedback architecture, and key dynamic specifications. Do not assume that an amplifier with the same function is interchangeable: input common-mode range, output swing, bandwidth, slew rate, noise, and stability requirements must all be checked. Use the Request a Quote form on this page to discuss replacement sourcing for the exact ordering code.
Is the AD9622AN suitable for industrial equipment?
The AD9622AN is listed with an industrial temperature grade, making it a reasonable candidate for industrial equipment subject to the complete operating-temperature and reliability requirements. Industrial grade alone does not establish compliance with automotive, medical, or safety-critical standards. Confirm the exact temperature limits, ESD rating, and qualification status in the manufacturer datasheet.
How should I decouple the AD9622AN power supply?
Place low-inductance bypass capacitors directly across the positive and negative supply pins, with the shortest possible connection to the device and a low-impedance ground plane. Keep the feedback and gain-setting resistors close to the inverting input and output pins. Because high-speed amplifiers can amplify layout parasitics, use a ground plane rather than long point-to-point ground wiring and verify the assembled design for oscillation.
What is the best way to design a stable amplifier circuit around the AD9622AN?
Start with the gain and feedback values recommended in the AD9622 datasheet, then keep the feedback loop physically small. Avoid long traces between the output, feedback components, and the inverting input, and place input and output decoupling capacitors close to their associated pins. Validate the design with the gain, load, supply, and temperature conditions expected in production rather than relying on simulation alone.
Does the AD9622AN support single-supply operation?
The verified specification listing identifies a ±5.5 V supply configuration for the AD9622AN. The manufacturer datasheet should be consulted for the permitted single-supply range, input common-mode behavior, and output-swing limits under that condition. If the design requires a single rail, level shifting or rail-to-rail input/output capability must be confirmed rather than inferred from the dual-rail listing.
How do I compare the AD9622AN with a lower-bandwidth op amp?
Compare the AD9622AN against the alternative on gain-bandwidth product, slew rate, input noise, offset voltage, output swing, common-mode range, supply current, and package pinout. The AD9622AN’s main differentiator is its very-high-speed, wide-bandwidth voltage-feedback positioning, while a lower-bandwidth amplifier may offer lower cost, lower noise, or lower power. The correct choice depends on whether bandwidth or precision dominates the signal chain.

Engineering reference data for AD9622AN — comparison, design guidance, and compliance information.

Selection Guide

Choose the AD9622AN when the design needs a single, wideband voltage-feedback amplifier in an 8-pin PDIP package and the application is a high-speed analog signal path. The part is a practical option for instrumentation, communications, video, active filtering, and laboratory equipment, particularly where through-hole construction simplifies assembly. Choose a lower-bandwidth precision amplifier when offset, noise, power, or cost dominate and the required signal bandwidth is modest. Do not substitute solely by function: verify the exact pinout, supply rating, common-mode range, output swing, gain-bandwidth product, slew rate, noise, and temperature grade. For a production redesign, confirm the lifecycle status and obtain the complete manufacturer datasheet before committing to a replacement.

Comparison with Alternatives

Parameter This Product AD9622AN AD9622BN AD9622AR AD9622DN AD9622FN
Package 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Amplifier Architecture Voltage feedback Voltage feedback Voltage feedback Voltage feedback Voltage feedback Voltage feedback

Key Differentiators

  • Wideband voltage-feedback positioning (vs AD9622BN)
  • Through-hole 8-pin PDIP configuration (vs AD9622DN)
  • Industrial temperature-grade listing (vs AD9622FN)

Design Notes

Use the manufacturer’s AD9622 pin configuration when assigning the 8-pin PDIP footprint, and verify the pin-one orientation and the location of the two supply terminals before layout release. Place the feedback resistors, gain-setting components, and any compensation capacitors close to the amplifier pins. A compact feedback loop reduces parasitic capacitance and helps preserve the intended high-speed behavior.

The verified listing identifies a ±5.5 V supply configuration. Confirm the absolute maximum supply voltage and permitted supply combinations in the AD9622 datasheet before connecting rails. Use low-inductance bypass capacitors from each supply pin to the ground plane, and route the return current directly to the device so that supply noise is not injected into the feedback network.

Do not add long breakaway traces between the output and the inverting-input feedback node. High-speed voltage-feedback amplifiers can become unstable when board parasitics alter the feedback phase margin. Keep the signal and return paths over a continuous ground plane, use a solid ground reference, and validate gain, bandwidth, settling, and oscillation behavior with the intended load and source impedance.

Avoid treating any op amp with a similar bandwidth or supply rating as a drop-in replacement. Check package, pinout, input common-mode range, output swing, slew rate, noise, offset, operating temperature, and supply current. Also confirm that the selected AD9622 suffix is offered in the required 8-pin PDIP package rather than a surface-mount variant.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The verified information identifies the industrial temperature grade and through-hole PDIP package. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not explicitly identified and should be confirmed from the manufacturer or current compliance documentation.

Data verified on: 2026-11-10 — data verified and curated by XAIPART's component engineering team

Related Searches

AD9622AN datasheet AD9622AN datasheet pdf AD9622AN pinout AD9622AN PDIP AD9622AN wideband amplifier AD9622AN equivalent AD9622AN replacement AD9622AN cross reference AD9622AN voltage feedback amplifier AD9622AN application circuit AD9622AN price AD9622AN stock Analog Devices AD9622AN AD9622AN vs AD9622BN

Related Components & Terms

Analog Devices AD9622AN AD9622 AD9622BN AD9622AR AD9622DN AD9622FN operational amplifier voltage-feedback amplifier analog amplifier linear amplifier semiconductor wideband amplifier 8-pin PDIP through-hole package surface-mount comparison industrial temperature grade feedback network signal conditioning communications receiver video amplification active filter laboratory instrumentation gain bandwidth product slew rate input noise voltage quiescent current
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details