AD9622AN - Wideband Voltage Feedback Amplifier | Analog Devices
部品番号: AD9622AN ✓ 生産中AD9622AN 概要
An operational amplifier, or op amp, is an active analog component that uses high open-loop gain and negative feedback to amplify small voltage differences. In a practical circuit, the op amp is connected to external resistors or capacitors that determine gain, bandwidth, and filtering behavior. The AD9622AN belongs to the amplifier IC hierarchy: operational amplifier, analog amplifier, linear amplifier, and semiconductor.
The AD9622AN uses a voltage-feedback architecture, where the feedback network controls the closed-loop response. Compared with current-feedback amplifiers, voltage-feedback amplifiers commonly provide a more straightforward gain-setting method and strong performance in inverting and non-inverting gain configurations. The manufacturer describes the AD9622 family as a very high-speed, wide bandwidth amplifier family, making the part relevant to precision signal conditioning and video, communications, and test-and-measurement signal paths.
The AD9622AN is specified for operation from a nominal ±5.5 V supply according to distributor specification listings. The exact input-voltage range, output-voltage swing, gain-bandwidth product, slew rate, input-noise voltage, input-offset voltage, and quiescent-current values should be confirmed in the manufacturer datasheet before final circuit release.
The through-hole PDIP package provides a practical option for laboratory prototypes, legacy instrumentation, educational platforms, and designs where through-hole assembly is preferred. Its 8-pin arrangement supports the standard single operational-amplifier connection, with dedicated supply, input, and output terminals.
Typical applications include high-speed analog signal conditioning, communications receivers, video amplification, active filters, pulse-shaping networks, and test equipment. The wideband voltage-feedback architecture makes the AD9622AN a candidate where signal fidelity and bandwidth are more important than low quiescent current or micropower operation.
For layout, keep the feedback components and signal traces short, place compensation and decoupling capacitors close to the device pins, and provide a low-impedance ground return. Verify stability, output swing, and bandwidth in the intended gain configuration against the manufacturer’s application guidance.
ドロップイン代替品: AD9622AN — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
AD9622AN
✅ ドロップイン価格はお問い合わせください
データシートを見る →AD9622BN
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
AD9622AR
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
AD9622DN
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
AD9622FN
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
AD9622AN 最大定格&電気的特性
| Product Type | Single operational amplifier |
| Architecture | Voltage feedback |
| 電源電圧 | ±5.5 V |
| パッケージ | 8-pin PDIP |
| Terminal Count | 8 |
| 実装タイプ | Through-hole |
| Package Shape | Rectangular |
| Temperature Grade | Industrial |
| Application Category | Wideband voltage-feedback amplifier |
AD9622AN rectangular ピン配置ガイド
AD9622AN (rectangular パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: AD9622AN.
詳細は データシート をご参照ください。
主な用途
AD9622AN の用途: 6 件s: High-Speed Analog Signal Conditioning, Communications Receiver Front End, Video Signal Amplification, Active Filter and Equalization Networks, Pulse and Waveform Shaping, Laboratory Instrumentation and Test Equipment.
High-Speed Analog Signal Conditioning
The AD9622AN is a candidate for conditioning low-level analog signals in instrumentation and communications equipment because the AD9622 family uses a wideband voltage-feedback architecture. The amplifier can be placed in a non-inverting or inverting gain stage ahead of an ADC, comparator, or measurement front end. Its industrial-grade listing supports industrial designs, while the exact input common-mode range, output swing, bandwidth, and slew rate must be confirmed in the datasheet. Short feedback traces and local decoupling are essential for maintaining stability in a high-speed layout.
おすすめ
Communications Receiver Front End
The AD9622AN can be evaluated for communications receiver paths where a fast voltage-feedback amplifier is needed to amplify a received waveform before demodulation, filtering, or conversion. Its wideband voltage-feedback positioning supports signal paths where phase and settling behavior matter more than micropower consumption. Use the manufacturer’s gain, bandwidth, noise, and output-swing limits to select the feedback network. Keep the RF or baseband input trace short and terminate or bias the input exactly as recommended for the intended operating frequency.
おすすめ
Video Signal Amplification
The AD9622AN is applicable to video signal amplification and active analog video conditioning when the circuit requires more bandwidth than a general-purpose precision op amp. The voltage-feedback architecture allows the closed-loop gain to be set with external resistors and is suitable for inverting, non-inverting, and filtering configurations. Designers should confirm video bandwidth, gain flatness, output drive, and settling performance for the specific resolution and standard used. A compact layout and controlled grounding are necessary because long PCB traces can reduce performance or create oscillation.
おすすめ
Active Filter and Equalization Networks
The AD9622AN can be used in active low-pass, high-pass, or band-pass filter sections where the amplifier must operate with external feedback components and preserve signal amplitude. Its wideband voltage-feedback architecture provides a useful platform for equalization and frequency shaping in analog test and communications equipment. The exact usable bandwidth and stability margin depend on the selected closed-loop gain and component values, so the circuit must be checked against the manufacturer’s application guidance. Place filter resistors and capacitors close to the inverting-input node to minimize parasitic feedback paths.
おすすめ
Pulse and Waveform Shaping
The AD9622AN is a reasonable candidate for amplifying and shaping pulsed or transient analog waveforms in laboratory and industrial test systems. The device’s high-speed voltage-feedback positioning supports applications where the signal must be reproduced with controlled rise time and adequate settling. The designer should use the manufacturer’s slew-rate, output-swing, overload-recovery, and stability data to establish the usable amplitude and bandwidth. Terminate unused inputs according to the datasheet and keep the feedback network compact.
おすすめ
Laboratory Instrumentation and Test Equipment
The AD9622AN fits legacy-style laboratory instrumentation where a through-hole 8-pin PDIP operational amplifier is convenient for prototyping and repair. It can be used in gain stages, buffer-like configurations, and analog measurement chains for low-frequency or moderate-bandwidth signals. The 8-pin PDIP format simplifies manual assembly and socket-based prototyping, although the exact operating-temperature limits and electrical characteristics should be reviewed before production release. A stable reference layout, local bypass capacitors, and careful grounding are more important than board area in this application.
おすすめ
エンジニアリング参考データ: AD9622AN — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | AD9622AN | AD9622BN | AD9622AR | AD9622DN | AD9622FN |
|---|---|---|---|---|---|---|
| Package | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Amplifier Architecture | Voltage feedback | Voltage feedback | Voltage feedback | Voltage feedback | Voltage feedback | Voltage feedback |
主な差別化要因
- Wideband voltage-feedback positioning (vs AD9622BN)
- Through-hole 8-pin PDIP configuration (vs AD9622DN)
- Industrial temperature-grade listing (vs AD9622FN)
設計ノート
Use the manufacturer’s AD9622 pin configuration when assigning the 8-pin PDIP footprint, and verify the pin-one orientation and the location of the two supply terminals before layout release. Place the feedback resistors, gain-setting components, and any compensation capacitors close to the amplifier pins. A compact feedback loop reduces parasitic capacitance and helps preserve the intended high-speed behavior.
The verified listing identifies a ±5.5 V supply configuration. Confirm the absolute maximum supply voltage and permitted supply combinations in the AD9622 datasheet before connecting rails. Use low-inductance bypass capacitors from each supply pin to the ground plane, and route the return current directly to the device so that supply noise is not injected into the feedback network.
Do not add long breakaway traces between the output and the inverting-input feedback node. High-speed voltage-feedback amplifiers can become unstable when board parasitics alter the feedback phase margin. Keep the signal and return paths over a continuous ground plane, use a solid ground reference, and validate gain, bandwidth, settling, and oscillation behavior with the intended load and source impedance.
Avoid treating any op amp with a similar bandwidth or supply rating as a drop-in replacement. Check package, pinout, input common-mode range, output swing, slew rate, noise, offset, operating temperature, and supply current. Also confirm that the selected AD9622 suffix is offered in the required 8-pin PDIP package rather than a surface-mount variant.
コンプライアンス情報
The verified information identifies the industrial temperature grade and through-hole PDIP package. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not explicitly identified and should be confirmed from the manufacturer or current compliance documentation.