Analog Devices

LT1012IN8 - Picoamp Input Precision Op Amp | Analog Devices

MPN: LT1012IN8 ✗ End of Life
Microvolt class Vdss Picoampere class Id 8-pin PDIP Package
MOQ: 1 |

LT1012IN8 Overview

Analog Devices LT1012IN8 is a picoamp-input, microvolt-offset precision operational amplifier with a 5 mA output-current capability, approximately 1 mW power dissipation on two Ni-Cad batteries, and an 8-pin PDIP package. The LT1012 family combines extremely low input bias current with high common-mode rejection, high power-supply rejection, low voltage noise, low current noise, and minimal warm-up drift.

A precision operational amplifier is a voltage-feedback amplifier designed to minimize error contributions from input bias current, offset voltage, drift, noise, and power-supply variation. Within the broader hierarchy of semiconductor devices, the LT1012 is an analog integrated circuit, and within analog integrated circuits it belongs to the precision operational-amplifier family. Its internally compensated architecture allows it to operate as a closed-loop amplifier without an external compensation capacitor.

The principal benefits of the LT1012IN8 are picoampere-scale input bias current maintained across the full -55 °C to 125 °C temperature range, microvolt-scale input offset voltage, low offset drift, and low voltage and current noise. The manufacturer identifies the device as a universal precision amplifier for instrumentation buffers, low-level signal conditioning, sensor interfaces, battery-powered measurement systems, photodiode amplifiers, and high-impedance transducers. Its low-power operating characteristics are particularly useful when the amplifier must operate from small-cell or dual-cell sources.

Technically, the LT1012 combines low input bias current with low offset voltage and drift rather than optimizing only one parameter. This balance is important because high source impedance can convert input leakage into a substantial input-voltage error, while long-term measurement accuracy can be limited by offset drift. The common-mode and power-supply rejection characteristics also reduce errors caused by signal-source reference shifts and supply variation. Internally compensated operation simplifies closed-loop design while retaining stable operation in precision amplifier topologies.

Typical applications include pH and electrochemical sensor amplification, photodiode and optical-sensor signal chains, high-impedance instrumentation, low-current measurement, precision bridge amplifiers, and battery-operated test equipment. In these systems, the LT1012 can serve as a non-inverting buffer, inverting amplifier, transimpedance amplifier, or instrumentation-amplifier input stage. The 5 mA load-current capability supports the low-power signal paths associated with portable and industrial measurement systems.

Design should begin by checking input common-mode range, output swing, supply current, and stability for the intended feedback network. Input-bias-current error should be calculated using the source impedance, while offset and drift requirements should be evaluated over the actual temperature span. Because the LT1012IN8 is a legacy PDIP device, board layout, socket availability, thermal exposure, and obsolescence-risk management may influence lifecycle planning.

This product record combines manufacturer electrical characteristics, package and ordering information, source-document links, practical application guidance, and a structured comparison of confirmed same-package alternatives. It also highlights the engineering trade-offs that matter when selecting a picoamp-input precision amplifier for high-impedance, low-power measurement systems.

Drop-in alternatives for LT1012IN8 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with LT1012IN8 (same form factor and footprint) — differing in Compensation, Input Bias Current, Input Offset Voltage, Operating Temperature Range, Package.

Analog Devices
Compensation: Internally compensated
Input Bias Current: 25 pA
Input Offset Voltage: 8 uV
Compare with LT1012IN8 →

LT1012IN8#PBF

✅ Drop-In
📦 8-pin PDIP
Lead-free ordering designation with the same 8-pin PDIP footprint and LT1012 precision-amplifier function

📋 Reference alternative (not in catalog)

LT1012AIN8

✅ Drop-In
📦 8-pin PDIP
Same 8-pin PDIP package and precision-amplifier function; qualification and temperature-grade suffix must be confirmed

📋 Reference alternative (not in catalog)

LT1012CN8

✅ Drop-In ⚠️ Specs Unverified
📦 8-pin PDIP
Same 8-pin PDIP package and LT1012 family; commercial temperature-grade coverage differs from the full-temperature IN8 grade

📋 Reference alternative (not in catalog)

LT1012DIN8

✅ Drop-In ⚠️ Specs Unverified
📦 8-pin PDIP
Same 8-pin PDIP package and LT1012 family; industrial temperature-grade coverage differs from the -55 °C to 125 °C IN8 specification

📋 Reference alternative (not in catalog)

LT1012BIN8

✅ Drop-In ⚠️ Specs Unverified
📦 8-pin PDIP
Same 8-pin PDIP package and LT1012 family; grade-specific temperature limits differ from the full-temperature IN8 version

📋 Reference alternative (not in catalog)

LT1012IN8 Maximum Ratings & Electrical Characteristics

Product Type Single, internally compensated precision operational amplifier
Input Bias Current Picoampere class
Input Offset Voltage Microvolt class
Offset Drift Low drift with time and temperature
Voltage Noise Low noise
Current Noise Low noise
Output Load Current 5 mA
Battery Power Dissipation 1 mW on two Ni-Cad batteries
Open-Loop Voltage Gain 1,000,000 V/V
Operating Temperature Range -55 °C to 125 °C
Common-Mode Rejection Extremely high; numeric ratio not stated
Power-Supply Rejection Extremely high; numeric ratio not stated
Compensation Internal
Circuit Count 1 amplifier
Package 8-pin PDIP
Mounting Type Through-hole

LT1012IN8 Pin Configuration

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
Pin 1 OFFSET NULL — Offset-voltage null adjustment
Pin 2 INVERTING INPUT — Inverting input terminal
Pin 3 NON-INVERTING INPUT — Non-inverting input terminal
Pin 4 V- — Negative power-supply terminal
Pin 5 OFFSET NULL — Offset-voltage null adjustment
Pin 6 OUTPUT — Amplifier output
Pin 7 V+ — Positive power-supply terminal
Pin 8 NC — Not connected

Typical Applications

LT1012IN8 is suitable for 6 applications: Electrochemical Sensor Signal Conditioning, Photodiode Amplification, Battery-Powered Measurement, Precision Bridge Amplifier, High-Impedance Instrumentation Buffer, Low-Current Sensor Interface.

⚡

Electrochemical Sensor Signal Conditioning

The LT1012IN8 fits electrochemical, pH, and ion-sensor interfaces because picoampere-class input bias current limits leakage-generated error at high source impedance. Its microvolt-class offset voltage and low offset drift support stable measurement when the sensor output is small and the input reference can vary. The amplifier can operate as a non-inverting preamplifier or transimpedance stage, while 5 mA output-current capability suits the low-power measurement paths commonly used in portable analyzers. A principal trade-off is its legacy 8-pin PDIP format, so new compact instrument designs must account for board area and long-term sourcing.

📷

Photodiode Amplification

The LT1012IN8 is suitable for low-current photodiode and optical-sensor amplification because picoampere input bias current reduces error current relative to many conventional precision amplifiers. Its low voltage and current noise preserve small-signal fidelity, while the 5 mA output-current rating supports the feedback network and following stages. The amplifier can implement a transimpedance configuration with a feedback resistor and compensation capacitor selected for the detector capacitance and required bandwidth. Designers should verify stability, input capacitance, and achievable bandwidth because low input current alone does not guarantee a usable transimpedance bandwidth.

🔋

Battery-Powered Measurement

The LT1012IN8 supports battery-powered measurement systems because Analog Devices reports approximately 1 mW power dissipation when operating from two Ni-Cad batteries, with output load capability of 5 mA. Low power reduces the thermal and battery-current burden of portable instrumentation, while picoampere input bias current is valuable when sensors present high source impedance. The internally compensated amplifier simplifies implementation as a voltage buffer or gain stage. The design should still include low-leakage PCB materials and clean assembly practices because board contamination can overwhelm the extremely small bias current in high-impedance nodes.

🏭

Precision Bridge Amplifier

The LT1012IN8 can serve as an input or gain stage in precision bridge measurements where offset voltage, drift, and common-mode errors directly affect accuracy. Its microvolt-class offset voltage and high common-mode rejection suit low-level sensor bridges, while the 5 mA output-current capability supports conventional resistive feedback networks. The device may be paired with matched resistors and a differential stage to improve rejection of excitation drift. Before committing to the design, calculate input-bias-current error from bridge output impedance and confirm that signal common-mode voltage remains within the amplifier’s operating limits.

🧰

High-Impedance Instrumentation Buffer

The LT1012IN8 fits instrumentation buffering when source impedance is high enough that input leakage becomes a material measurement error. Picoampere-class bias current, maintained over the full -55 °C to 125 °C range, helps preserve signal integrity in capacitive sensors, electrometers, and laboratory probes. The microvolt offset specification supports precision signal conditioning, and the low-noise characteristics improve the signal-to-noise ratio for small sensor outputs. Layout remains critical: minimize exposed PCB area around inputs, use guarding where appropriate, and prevent flux residue or humidity from creating leakage paths comparable to the specified bias current.

🔧

Low-Current Sensor Interface

The LT1012IN8 is appropriate for low-current sensors whose output impedance makes amplifier input leakage the dominant error term. Its picoampere bias current reduces the error voltage generated across that impedance, while microvolt offset and low drift preserve accuracy over time and temperature. The 5 mA output-current capability is sufficient for common resistive feedback networks and modest downstream loads. The internally compensated topology supports straightforward closed-loop implementation. Engineers should still validate the complete signal path against sensor leakage, PCB cleanliness, supply noise, temperature range, and the required settling time.

Recommended Products Summary

LT1012AIN8 Same-family precision amplifier for grade evaluation Used in: Electrochemical Sensor Signal Conditioning, Photodiode Amplification, Battery-Powered Measurement, Precision Bridge Amplifier, High-Impedance Instrumentation Buffer, Low-Current Sensor Interface LT1012IN8#PBF Lead-free same-package ordering option Used in: Electrochemical Sensor Signal Conditioning, Photodiode Amplification, Battery-Powered Measurement, Precision Bridge Amplifier, High-Impedance Instrumentation Buffer, Low-Current Sensor Interface
What is the LT1012IN8?
The LT1012IN8 is an internally compensated, single precision operational amplifier with picoampere-class input bias current and microvolt-class input offset voltage. According to the manufacturer datasheet, it maintains picoampere bias currents over the full -55 °C to 125 °C range and also provides low voltage noise, low current noise, low power consumption, and minimal warm-up drift.
What are the key specifications of LT1012IN8?
The LT1012IN8 is a single precision op amp in an 8-pin PDIP package. The manufacturer datasheet identifies picoampere input bias current, microvolt offset voltage, low offset drift, low voltage and current noise, a 1,000,000 V/V open-loop gain, 5 mA output load capability, and operation from -55 °C to 125 °C as principal characteristics.
Where can I download the LT1012IN8 datasheet PDF?
The LT1012IN8 datasheet PDF is available from Analog Devices at the official LT1012 datasheet link listed with this product. The document is titled “Picoamp Input Current, Microvolt Offset, Low Noise Op Amp” and should be used to confirm electrical characteristics, pin assignments, ordering information, and operating-limit details before final circuit release.
Where can I find the LT1012IN8 pinout?
The LT1012IN8 pinout is shown in the pin-configuration section of the manufacturer datasheet. The 8-pin PDIP device uses the standard dual operational-amplifier arrangement: offset null on pins 1 and 5, inverting input on pin 2, non-inverting input on pin 3, negative supply on pin 4, output on pin 6, positive supply on pin 7, and no connection on pin 8.
Where to buy LT1012IN8 online?
Use the Request a Quote form on this page to request LT1012IN8 availability, current commercial terms, and an order quotation. The form allows engineers to specify quantity, packaging requirements, and delivery needs without relying on stale distributor listings or third-party marketplace recommendations.
What is the price of LT1012IN8?
The current commercial price for LT1012IN8 is not displayed as a static figure on this page because pricing and availability change with order quantity and sourcing conditions. Submit the Request a Quote form with your required quantity and delivery location to obtain the applicable quotation for the exact LT1012IN8 ordering code.
What is the lead time for LT1012IN8?
The current lead time for LT1012IN8 should be confirmed through the Request a Quote form on this page. Because the order code is a legacy 8-pin PDIP configuration, include your required quantity, approved source list, target delivery date, and any traceability or documentation requirements when requesting the quotation.
Is LT1012IN8 in stock?
Current LT1012IN8 stock should be confirmed through the Request a Quote form on this page rather than inferred from a distributor search result. Include the exact MPN, quantity, package preference, and required ship date so the supplier can return an availability commitment against the correct ordering configuration.
What can replace LT1012IN8?
The closest confirmed drop-in choices are same-package LT1012 ordering variants, including LT1012IN8#PBF and LT1012AIN8, subject to checking the manufacturer ordering table for grade and termination differences. The LT1012IN8#PBF uses an 8-pin PDIP footprint and the LT1012AIN8 is also listed as an 8-pin PDIP amplifier, but engineers should verify temperature grade and lead-finish requirements before substitution.
Is LT1012IN8 the same as LT1012AIN8?
The LT1012IN8 and LT1012AIN8 are both listed as single amplifiers in an 8-pin PDIP package, but their full ordering codes may indicate different qualification or commercial conditions. According to manufacturer ordering information, the exact grade suffix must be checked against temperature range, automotive requirements, and termination before treating either part as a drop-in replacement.
LT1012IN8 vs LT1012IN8#PBF - which is better?
The LT1012IN8#PBF is the lead-free ordering option in the same 8-pin PDIP package, while LT1012IN8 denotes the original ordering code. The LT1012IN8#PBF is generally preferable for new RoHS-controlled production, subject to confirming the complete ordering table, while the original code may matter for maintaining an existing approved BOM.
When should I choose LT1012IN8 over another precision op amp?
Choose the LT1012IN8 when the design combines picoampere-class input bias current, microvolt-class offset voltage, low noise, and operation over -55 °C to 125 °C. It is especially appropriate for high-source-impedance sensors and low-power battery systems where input leakage would create a larger error than the amplifier’s offset and noise performance.
Is LT1012IN8 suitable for battery-powered instrumentation?
The LT1012IN8 is suitable for battery-powered instrumentation because the manufacturer reports approximately 1 mW power dissipation when operating from two Ni-Cad batteries while delivering up to 5 mA of load current. This low-power behavior, combined with picoampere input bias current, supports compact electrochemical, photodiode, and portable measurement systems.
What is the best Analog Devices equivalent for LT1012IN8?
The best Analog Devices equivalent is an LT1012 variant with the same 8-pin PDIP footprint, electrical function, and required temperature grade. LT1012IN8#PBF and LT1012AIN8 are the closest confirmed candidates, but the manufacturer ordering table must be checked because suffix changes can affect qualification, lead finish, or commercial status even when the package remains unchanged.
What design considerations apply to LT1012IN8 PCB layout?
Keep the input node and feedback components physically close to the amplifier to minimize leakage from board contamination, humidity, and contamination-induced currents. Use guarding where appropriate, clean the PCB assembly, avoid leakage-prone flux residues near high-impedance inputs, and account for socket or board leakage when picoampere input bias is the dominant error source.

Engineering reference data for LT1012IN8 — comparison, design guidance, and compliance information.

Selection Guide

Choose the LT1012IN8 when high-source-impedance sensing, microvolt-level offset control, low noise, and operation from -55 °C to 125 °C are more important than minimizing board area. Its picoampere-class bias current is particularly valuable for electrochemical sensors, photodiodes, electrometers, and high-impedance instrumentation, while approximately 1 mW battery operation supports portable measurement. Select LT1012IN8#PBF for a lead-free same-package option after confirming the ordering table. Consider LT1012AIN8 when its specific qualification and temperature grade meet the design, and use CN8, DIN8, or BIN8 only when their respective grade ranges are acceptable. Because all candidates retain the legacy 8-pin PDIP footprint, they simplify PCB substitution, but suffix differences must be verified rather than assumed. None should be selected solely from package shape; bias current, offset, drift, noise, common-mode range, and lifecycle requirements remain decisive.

Comparison with Alternatives

Parameter This Product LT1012IN8#PBF LT1012AIN8 LT1012CN8 LT1012DIN8 LT1012BIN8
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin assis PDIP 8-pin PDIP
Product Type Precision operational amplifier Precision operational amplifier Precision operational amplifier Precision operational amplifier Precision operational amplifier Precision operational amplifier

Key Differentiators

  • Very low input bias current for precision high-impedance measurements (vs LT1012IN8#PBF)
  • Full-temperature picoampere bias-current performance (vs LT1012CN8)
  • Low-power operation with useful output-current capability (vs LT1012AIN8)

Design Notes

Keep the non-inverting input, inverting input, and feedback-resistor connections compact and isolated from high-impedance leakage paths. For picoampere-class operation, use a clean board surface, remove flux residues, avoid moisture traps, and consider guarding. The manufacturer rates the input bias current in picoamperes, so contamination currents comparable to that scale can dominate the measurement error.

Use the lowest supply voltage that still satisfies input common-mode range and output swing requirements. Analog Devices reports approximately 1 mW dissipation with two Ni-Cad batteries and a 5 mA load-current capability, making the LT1012IN8 suitable for low-power precision systems. Check supply-current behavior across temperature because bias-current and noise specifications do not by themselves characterize total power consumption.

Do not treat the IN8, AIN8, CN8, DIN8, or BIN8 suffixes as electrically interchangeable without checking the ordering table. The suffix may change temperature grade, qualification, or termination even though the device retains the 8-pin PDIP footprint. Confirm common-mode range, supply limits, offset limits, and lifecycle status for the exact production code before releasing a new PCB.

Calculate input-bias-current error as input bias current multiplied by total source impedance, and include PCB leakage, socket leakage, and protective-device leakage where relevant. Offset error and drift should be evaluated over the intended temperature span rather than at room temperature alone. These calculations help determine whether the LT1012IN8’s picoampere and microvolt characteristics materially improve the measurement.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The LT1012IN8#PBF ordering designation identifies a lead-free finish, but the compliance status of the original LT1012IN8 code cannot be inferred from that designation. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals status require confirmation from the manufacturer or current material documentation.

Data verified on: 2026-11-14 — data verified and curated by XAIPART's component engineering team

Related Searches

LT1012IN8 datasheet LT1012IN8 pinout LT1012IN8 datasheet pdf LT1012IN8 equivalent LT1012IN8 replacement LT1012IN8 vs LT1012IN8#PBF LT1012IN8 vs LT1012AIN8 LT1012IN8 8-pin PDIP LT1012IN8 picoamp input current LT1012IN8 precision op amp LT1012IN8 price LT1012IN8 stock Analog Devices LT1012IN8 LT1012IN8 high impedance instrumentation

Related Components & Terms

Analog Devices Linear Technology LT1012IN8 LT1012IN8#PBF LT1012AIN8 LT1012CN8 LT1012DIN8 LT1012BIN8 LT1012 precision operational amplifier analog integrated circuit precision amplifier picoampere input bias current microvolt offset voltage low voltage noise low current noise common-mode rejection power-supply rejection offset drift internally compensated amplifier 8-pin PDIP DIP package through-hole package electrochemical sensor photodiode amplifier
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details