AD9631AR - High-Speed Voltage Feedback Op Amp | Analog Devices
MPN: AD9631AR ✓ ActiveAD9631AR Overview
A voltage-feedback operational amplifier is a feedback-controlled amplifier that uses voltage error at its high-impedance input to correct the output. This architecture belongs to the broader linear-amplifier and signal-conditioning hierarchy, where precision amplifiers are used for instrumentation, communications, analog-to-digital-converter interfaces, active filtering, and buffer functions. The AD9631 family is positioned for applications requiring high bandwidth, low distortion, fast settling performance, and operation at low noise gains.
The AD9631AR combines an 8-SOIC package with operation from a single 6 V to 12 V supply and a specified gain-of-1 stability architecture. Analog Devices identifies the family as an ultralow-distortion, high-speed amplifier for applications formerly served by current-feedback devices. The manufacturer also documents the closely related AD9632, which is optimized for a gain of +2, while the AD9631 is specifically characterized for stable operation at gain +1.
Typical uses include photodiode receiver front ends, communications equipment, data-acquisition channels, active filters, and high-speed instrumentation. In a receiver, the amplifier can convert a small detector current or voltage into a voltage suitable for downstream conversion or digitization. The device's speed and low-distortion characteristics also make it appropriate for broadband analog stages where a conventional general-purpose operational amplifier may not provide sufficient bandwidth.
Designers should use the manufacturer's pin description and typical application circuits when assigning PCB traces. Supply bypassing, grounding, input and output impedance, and gain-setting resistors directly influence high-frequency behavior. The 8-SOIC layout requires careful placement of input and feedback components to minimize parasitic capacitance and preserve the intended bandwidth and distortion performance.
Drop-in alternatives for AD9631AR — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with AD9631AR (same form factor and footprint) — differing in Architecture, Package.
AD9631ARZ
✅ Drop-InContact for price
View Datasheet →AD9631ARZ-REEL
✅ Drop-In📋 Reference alternative (not in catalog)
AD9631ARZ-REEL7
✅ Drop-In📋 Reference alternative (not in catalog)
AD9631ARZ-RL
✅ Drop-In📋 Reference alternative (not in catalog)
AD9631ARZ-R2
✅ Drop-In📋 Reference alternative (not in catalog)
AD9631AR Maximum Ratings & Electrical Characteristics
| Amplifier Type | Voltage Feedback Amplifier |
| Number of Circuits | 1 circuit |
| Channel Count | 1 channel |
| Package | 8-SOIC |
| Mounting Type | Surface Mount |
| Operating Supply Voltage | 6 V to 12 V |
| Minimum Dual Supply Voltage | ±3 V |
| Maximum Dual Supply Voltage | ±6 V |
| Stable Gain | +1 |
| Input Voltage Noise Density | 7 nV/√Hz |
| Architecture | Voltage feedback |
| Signal Type | Single-ended |
| Product Status | Production |
| Evaluation Board | AD9631AR-EBZ |
| Evaluation Board Package | 8-SOIC |
| Related Gain-Optimized Part | AD9632, stable at gain +2 |
| Evaluation Board RoHS Status | RoHS Compliant |
| Power Dissipation | 900 mW maximum |
| Package Length | 5 mm maximum |
| Package Height | 1.5 mm maximum |
AD9631AR 1.5 mm maximum Pin Configuration Guide
Pin configuration for AD9631AR (1.5 mm maximum package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.
No detailed pinout data available for AD9631AR.
Refer to the datasheet for full pin configuration.
Typical Applications
AD9631AR is suitable for 6 applications: Photodiode Receiver Front End, High-Speed Data Acquisition, Communications Signal Conditioning, Active Filtering, Broadband Instrumentation, Analog-to-Digital Converter Interface.
Photodiode Receiver Front End
The AD9631AR fits a low-noise photodiode receiver because it combines a high-speed voltage-feedback architecture with stable operation at gain +1 and a 6 V to 12 V supply range. Place the amplifier close to the detector output so the signal is amplified before cable capacitance and board parasitics add significant loading. The 7 nV/√Hz input-noise figure supports low-amplitude receiver design, while the gain-of-1 stability is useful for transimpedance or front-end stages that cannot tolerate high minimum-gain restrictions. Use the manufacturer's pin-description table and reference configuration to assign feedback, balance, supply, and output connections.
Recommended
High-Speed Data Acquisition
The AD9631AR is appropriate for a high-speed acquisition channel that must amplify a small signal close to unity gain before conversion or sampling. Its gain-of-1 stability avoids requiring the higher minimum gain often imposed on high-speed voltage-feedback amplifiers, while the 6 V to 12 V operating range supports common laboratory and embedded supply arrangements. Place the amplifier near the source to minimize high-frequency loss, and keep the feedback loop short and symmetric. The evaluation board can help reproduce the intended circuit before converting it into a compact 8-SOIC PCB layout.
Recommended
Communications Signal Conditioning
The AD9631AR can serve as a broadband signal-conditioning amplifier in communications equipment where the input stage requires low distortion and operation close to unity gain. Its voltage-feedback architecture supports conventional resistor-defined gain networks, and the listed 6 V to 12 V supply range accommodates multiple system rail arrangements. The amplifier is best positioned near the receiver or sensor to reduce trace loss before amplification. Designers should follow the manufacturer's typical application circuits for decoupling and feedback-component selection because high-frequency stability depends on total parasitic capacitance around the input and feedback nodes.
Recommended
Active Filtering
The AD9631AR is suitable for active-filter stages that need more bandwidth than a general-purpose operational amplifier and can be configured near gain +1. Its gain-of-1 stability is particularly relevant to first-stage filters with modest closed-loop gain, while the 8-SOIC footprint supports compact implementation. Use short feedback paths and a ground plane that remains continuous beneath the amplifier to limit noise pickup and feedback coupling. Exact resistor and capacitor values should be calculated against the desired filter response and checked with the manufacturer guidance for stability at the selected noise gain.
Recommended
Broadband Instrumentation
The AD9631AR fits broadband instrumentation requiring a single high-speed voltage-feedback amplifier with stable unity-gain operation. A 6 V to 12 V supply range gives designers flexibility when building laboratory instruments around common power rails, while the compact 8-SOIC outline supports multi-channel analog boards. Preserve performance by placing decoupling close to the supply pins, using a low-inductivity ground return, and avoiding long high-impedance input traces. The AD9631AR-EBZ evaluation board provides a practical way to characterize noise, output drive, and the intended feedback network before final assembly.
Recommended
Analog-to-Digital Converter Interface
The AD9631AR can provide the drive and signal conditioning stage preceding an analog-to-digital converter when the desired closed-loop gain is near +1. Its stable gain-of-1 operation differentiates it from amplifiers intended to work only at higher noise gain, and the broad supply range supports several converter-interface architectures. Place the amplifier close to the converter input to minimize trace capacitance and maintain edge quality. Component selection should account for the converter's input capacitance, settling requirements, and kickback behavior using the manufacturer's application guidance rather than assuming a generic op-amp model is sufficient.
Recommended
Recommended Products Summary
Engineering reference data for AD9631AR — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | AD9631ARZ | AD9631ARZ-REEL | AD9631ARZ-REEL7 | AD9631ARZ-RL | AD9631ARZ-R2 |
|---|---|---|---|---|---|---|
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Amplifier Type | Voltage Feedback Amplifier | Voltage Feedback | Voltage Feedback | Voltage Feedback | Voltage Feedback | Voltage Feedback |
| Channel Count | 1 channel | 1 channel | 1 channel | 1 channel | 1 channel | 1 channel |
| Operating Supply Voltage | 6 V to 12 V | 6 V to 12 V | 6 V to 12 V | 6 V to 12 V | 6 V to 12 V | 6 V to 12 V |
| Input Voltage Noise Density | 7 nV/√Hz | 7 nV/√Hz | 7 nV/√Hz | 7 nV/√Hz | 7 nV/√Hz | 7 nV/√Hz |
| Stable Gain | +1 | +1 | +1 | +1 | +1 | +1 |
| Maximum Power Dissipation | 900 mW | 900 mW | 900 mW | 900 mW | 900 mW | 900 mW |
| Package Length | 5 mm maximum | 5 mm maximum | 5 mm maximum | 5 mm maximum | 5 mm maximum | 5 mm maximum |
| Package Height | 1.5 mm maximum | 1.5 mm maximum | 1.5 mm maximum | 1.5 mm maximum | 1.5 mm maximum | 1.5 mm maximum |
Key Differentiators
- Unity-gain stability (vs AD9632ANZ)
- Compact single-amplifier implementation (vs AD9631ARZ)
- Single-supply operating flexibility (vs AD9631ARZ-REEL7)
Design Notes
Place the input, feedback, and output components close to the AD9631AR to minimize parasitic capacitance and trace inductance. Keep high-impedance input nodes physically short and use a continuous ground reference beneath the 8-SOIC footprint. The amplifier is stable at gain +1, but the final stability and distortion behavior still depend on the complete feedback network, source impedance, load, and PCB parasitics.
Use the manufacturer-recommended bypass capacitors at the supply pins and route them through the shortest practical path to the ground plane. The AD9631AR operates from 6 V to 12 V, and supply noise can appear as output noise or reduced headroom. Verify the supply rails at the device under maximum operating current and ensure the source can support the required transient current without causing rail droop.
Treat the AD9631AR as a high-speed circuit even when its bandwidth specification is not being used directly. Avoid long input and feedback traces, keep resistor junctions physically small, and account for capacitance at the feedback node. If the source or load is capacitive, use the manufacturer's guidance for isolation resistors or compensation to prevent peaking and ringing.
Compliance Information
Analog Devices states that the universal single high-speed amplifier evaluation boards associated with the AD9631 family are RoHS Compliant. Compliance for the exact AD9631AR ordering code should be confirmed from the manufacturer's current product records.