Analog Devices

AD9631AR - High-Speed Voltage Feedback Op Amp | Analog Devices

N.º de pieza: AD9631AR ✓ Activo
6 V to 12 V Vdss 8-SOIC Package
MOQ: 1 |

AD9631AR Descripción general

The Analog Devices AD9631AR is an ultralow-distortion, high-speed voltage-feedback operational amplifier in an 8-pin SOIC package. The device is designed for wideband signal-chain applications and is stable at a gain of +1. Its listed operating supply range is 6 V to 12 V, equivalent to a dual-supply operating range of ±3 V to ±6 V, while its input-voltage noise density is listed at 7 nV/√Hz. The AD9631AR is identified by Analog Devices as a production device and is described as a single-channel voltage-feedback amplifier.

A voltage-feedback operational amplifier is a feedback-controlled amplifier that uses voltage error at its high-impedance input to correct the output. This architecture belongs to the broader linear-amplifier and signal-conditioning hierarchy, where precision amplifiers are used for instrumentation, communications, analog-to-digital-converter interfaces, active filtering, and buffer functions. The AD9631 family is positioned for applications requiring high bandwidth, low distortion, fast settling performance, and operation at low noise gains.

The AD9631AR combines an 8-SOIC package with operation from a single 6 V to 12 V supply and a specified gain-of-1 stability architecture. Analog Devices identifies the family as an ultralow-distortion, high-speed amplifier for applications formerly served by current-feedback devices. The manufacturer also documents the closely related AD9632, which is optimized for a gain of +2, while the AD9631 is specifically characterized for stable operation at gain +1.

Typical uses include photodiode receiver front ends, communications equipment, data-acquisition channels, active filters, and high-speed instrumentation. In a receiver, the amplifier can convert a small detector current or voltage into a voltage suitable for downstream conversion or digitization. The device's speed and low-distortion characteristics also make it appropriate for broadband analog stages where a conventional general-purpose operational amplifier may not provide sufficient bandwidth.

Designers should use the manufacturer's pin description and typical application circuits when assigning PCB traces. Supply bypassing, grounding, input and output impedance, and gain-setting resistors directly influence high-frequency behavior. The 8-SOIC layout requires careful placement of input and feedback components to minimize parasitic capacitance and preserve the intended bandwidth and distortion performance.

Alternativas directas para AD9631AR — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con AD9631AR (mismo factor de forma y huella) — difiere en Architecture, Package.

Analog Devices
Architecture: Classical voltage-feedback architecture
Package: 8-lead SOIC
Comparar con AD9631AR →

AD9631ARZ

✅ Sustitución directa
Analog Devices
📦 8-SOIC
Voltage-feedback operational amplifier · 1 circuit · Classical voltage-feedback architecture · Unity-gain stable · 8-lead SOIC · Surface mount · Production · Rev. D

Consulte el precio

Ver hoja de datos →

AD9631ARZ-REEL

✅ Sustitución directa
📦 8-SOIC
Same AD9631 electrical family and 8-SOIC footprint; alternate reel ordering suffix

📋 Alternativa de referencia (no en el catálogo)

AD9631ARZ-REEL7

✅ Sustitución directa
📦 8-SOIC
Same AD9631 electrical family and 8-SOIC footprint; alternate reel orientation ordering suffix

📋 Alternativa de referencia (no en el catálogo)

AD9631ARZ-RL

✅ Sustitución directa
📦 8-SOIC
Same AD9631 electrical family and 8-SOIC footprint; alternate large-reel ordering suffix

📋 Alternativa de referencia (no en el catálogo)

AD9631ARZ-R2

✅ Sustitución directa
📦 8-SOIC
Same AD9631 electrical family and 8-SOIC footprint; alternate manufacturer ordering suffix

📋 Alternativa de referencia (no en el catálogo)

AD9631AR Valores máximos y características eléctricas

Amplifier Type Voltage Feedback Amplifier
Number of Circuits 1 circuit
Channel Count 1 channel
Encapsulado 8-SOIC
Tipo de montaje Surface Mount
Tensión de alimentación de funcionamiento 6 V to 12 V
Minimum Dual Supply Voltage ±3 V
Maximum Dual Supply Voltage ±6 V
Stable Gain +1
Input Voltage Noise Density 7 nV/√Hz
Architecture Voltage feedback
Signal Type Single-ended
Product Status Production
Evaluation Board AD9631AR-EBZ
Evaluation Board Package 8-SOIC
Related Gain-Optimized Part AD9632, stable at gain +2
Evaluation Board RoHS Status RoHS Compliant
Power Dissipation 900 mW maximum
Package Length 5 mm maximum
Package Height 1.5 mm maximum

Guía de configuración de pines de AD9631AR 1.5 mm maximum

Configuración de pines para AD9631AR (encapsulado 1.5 mm maximum). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado 1.5 mm maximum para AD9631AR

No hay datos detallados de patillaje disponibles para AD9631AR.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

AD9631AR es adecuado para 6 aplicacións: Photodiode Receiver Front End, High-Speed Data Acquisition, Communications Signal Conditioning, Active Filtering, Broadband Instrumentation, Analog-to-Digital Converter Interface.

📷

Photodiode Receiver Front End

The AD9631AR fits a low-noise photodiode receiver because it combines a high-speed voltage-feedback architecture with stable operation at gain +1 and a 6 V to 12 V supply range. Place the amplifier close to the detector output so the signal is amplified before cable capacitance and board parasitics add significant loading. The 7 nV/√Hz input-noise figure supports low-amplitude receiver design, while the gain-of-1 stability is useful for transimpedance or front-end stages that cannot tolerate high minimum-gain restrictions. Use the manufacturer's pin-description table and reference configuration to assign feedback, balance, supply, and output connections.

📊

High-Speed Data Acquisition

The AD9631AR is appropriate for a high-speed acquisition channel that must amplify a small signal close to unity gain before conversion or sampling. Its gain-of-1 stability avoids requiring the higher minimum gain often imposed on high-speed voltage-feedback amplifiers, while the 6 V to 12 V operating range supports common laboratory and embedded supply arrangements. Place the amplifier near the source to minimize high-frequency loss, and keep the feedback loop short and symmetric. The evaluation board can help reproduce the intended circuit before converting it into a compact 8-SOIC PCB layout.

🌐

Communications Signal Conditioning

The AD9631AR can serve as a broadband signal-conditioning amplifier in communications equipment where the input stage requires low distortion and operation close to unity gain. Its voltage-feedback architecture supports conventional resistor-defined gain networks, and the listed 6 V to 12 V supply range accommodates multiple system rail arrangements. The amplifier is best positioned near the receiver or sensor to reduce trace loss before amplification. Designers should follow the manufacturer's typical application circuits for decoupling and feedback-component selection because high-frequency stability depends on total parasitic capacitance around the input and feedback nodes.

🔧

Active Filtering

The AD9631AR is suitable for active-filter stages that need more bandwidth than a general-purpose operational amplifier and can be configured near gain +1. Its gain-of-1 stability is particularly relevant to first-stage filters with modest closed-loop gain, while the 8-SOIC footprint supports compact implementation. Use short feedback paths and a ground plane that remains continuous beneath the amplifier to limit noise pickup and feedback coupling. Exact resistor and capacitor values should be calculated against the desired filter response and checked with the manufacturer guidance for stability at the selected noise gain.

🖥️

Broadband Instrumentation

The AD9631AR fits broadband instrumentation requiring a single high-speed voltage-feedback amplifier with stable unity-gain operation. A 6 V to 12 V supply range gives designers flexibility when building laboratory instruments around common power rails, while the compact 8-SOIC outline supports multi-channel analog boards. Preserve performance by placing decoupling close to the supply pins, using a low-inductivity ground return, and avoiding long high-impedance input traces. The AD9631AR-EBZ evaluation board provides a practical way to characterize noise, output drive, and the intended feedback network before final assembly.

📈

Analog-to-Digital Converter Interface

The AD9631AR can provide the drive and signal conditioning stage preceding an analog-to-digital converter when the desired closed-loop gain is near +1. Its stable gain-of-1 operation differentiates it from amplifiers intended to work only at higher noise gain, and the broad supply range supports several converter-interface architectures. Place the amplifier close to the converter input to minimize trace capacitance and maintain edge quality. Component selection should account for the converter's input capacitance, settling requirements, and kickback behavior using the manufacturer's application guidance rather than assuming a generic op-amp model is sufficient.

Resumen de productos recomendados

AD9631AR-EBZ 8-SOIC evaluation board for prototyping the AD9631 amplifier Se usa en: Photodiode Receiver Front End, High-Speed Data Acquisition, Active Filtering, Broadband Instrumentation, Analog-to-Digital Converter Interface AD9632ANZ Analog Devices Se usa en: Communications Signal Conditioning, Analog-to-Digital Converter Interface
What is the AD9631AR?
The AD9631AR is a single-channel, high-speed voltage-feedback operational amplifier from Analog Devices. It is an ultralow-distortion amplifier that is stable at a gain of +1 and comes in an 8-SOIC package. According to the Analog Devices AD9631 product page, the AD9631 family is in production and is intended for wideband applications previously served by current-feedback amplifiers.
What is the operating voltage of AD9631AR?
The AD9631AR operates from 6 V to 12 V, corresponding to a listed dual-supply range of ±3 V to ±6 V. This supply range allows the amplifier to be used in circuits with single 6 V or 12 V rails as well as split ±3 V, ±5 V, or ±6 V supplies. Powering the device within its specified range is essential for maintaining its expected bandwidth, distortion, and output behavior.
Where can I download the AD9631AR datasheet PDF?
The manufacturer datasheet is available from Analog Devices through the official AD9631/AD9632 PDF at https://www.analog.com/media/en/technical-documentation/data-sheets/AD9631_9632.pdf. The Analog Devices product page at https://www.analog.com/en/products/ad9631.html also links to the data sheet and supporting documentation. Use the manufacturer document for pin assignments, electrical characteristics, recommended operating conditions, and typical application circuits.
Where can I find the AD9631AR pinout?
The AD9631AR pinout is shown in the manufacturer AD9631/AD9632 data sheet and its 8-pin SOIC pin-description table. The AD9631AR contains one amplifier channel and uses an 8-SOIC outline. When laying out a PCB, assign the supply, input, output, feedback, and balance connections directly from that table rather than inferring pins from another member of the AD9631 family.
What are the key specifications of AD9631AR that engineers should know?
The key AD9631AR specifications are its voltage-feedback architecture, 8-SOIC package, 6 V to 12 V operating supply range, and stable operation at gain +1. Analog Devices also lists a 7 nV/√Hz input-voltage noise density for the family comparison data and describes the device as an ultralow-distortion, high-speed amplifier. These parameters make it most relevant to wideband receiver, filter, and instrumentation circuits.
Is AD9631AR stable at gain 1?
Yes, the AD9631AR is explicitly designed to remain stable at a gain of +1. The manufacturer describes the AD9631 as the gain-of-1 member of the AD9631/AD9632 family, with the AD9632 optimized for gain +2. This distinction is important when selecting feedback resistors, because stability, bandwidth, and distortion behavior depend on the selected closed-loop gain.
What is the best drop-in replacement for AD9631AR?
The closest documented drop-in choice is the AD9631ARZ, which uses the same 8-SOIC package and represents the same AD9631 electrical family. Its suffix identifies a different ordering or packaging format rather than a different amplifier function. Before replacement, compare the exact temperature grade, tape-and-reel orientation, and orderable suffix against the original purchasing specification. No cross-brand equivalent with confirmed pin compatibility appears in the manufacturer documentation reviewed for this part.
Can AD9631ARZ replace AD9631AR?
The AD9631ARZ can serve as a same-family drop-in alternative when its package, temperature grade, and ordering suffix satisfy the original BOM requirements. Both parts use the 8-SOIC outline and the AD9631 voltage-feedback amplifier architecture. The comparison must also confirm supply range, gain stability, performance grade, and availability before treating the alternate suffix as an exact procurement replacement.
Is AD9631AR the same as AD9632ANZ?
No, AD9631AR and AD9632ANZ are related family members but are not interchangeable without review. The AD9631 is optimized for stable operation at gain +1, while the AD9632 is characterized for gain +2. That optimization changes bandwidth and stability behavior around the selected gain, so the choice depends on the feedback network and system gain rather than package identity alone.
When should I choose AD9631AR over AD9632ANZ?
Choose the AD9631AR when the signal chain requires stable operation at unity gain or a low closed-loop gain close to +1. Choose the AD9632ANZ when the circuit is designed around a gain of +2 and the associated AD9632 bandwidth and stability characteristics are preferable. Both belong to the same high-speed family, but their gain optimization is a functional distinction that must match the intended feedback topology.
What is AD9631AR suitable for?
The AD9631AR is suitable for photodiode receiver paths, communications equipment, data-acquisition channels, active filters, and high-speed instrumentation. Its gain-of-1 stability makes it especially useful where the input stage must operate close to unity gain without the instability concerns associated with some high-speed amplifiers. The analog.com product family information identifies wideband receiver and signal-conditioning uses.
How should I design around the AD9631AR for low distortion?
Design around the AD9631AR by following the manufacturer's typical application circuits for supply decoupling, feedback resistors, source and load impedances, and output loading. Keep the feedback loop compact and minimize parasitic capacitance around high-impedance input and feedback nodes. Correct grounding and symmetric layout are especially important because an 8-SOIC amplifier operating at high speed can pick up layout-related degradation that is not visible in low-frequency simulation.
Where can I buy AD9631AR online?
Use the Request a Quote form on this page to request the AD9631AR, current commercial terms, and availability. The form is the appropriate channel for exact suffix matching, quantity requirements, and shipment planning. It also avoids ambiguity between the AD9631AR order code and related AD9631 family packaging or evaluation-board part numbers.
What is the price of AD9631AR?
Submit the AD9631AR to the Request a Quote form on this page for current pricing and quantity-break terms. The page presents price information only when it can be matched to the exact AD9631AR order code. Include your required quantity, packing preference, and delivery location so the returned quotation reflects the correct commercial configuration.
What is the lead time for AD9631AR and is it in stock?
Request current lead time and stock confirmation through the Request a Quote form on this page. Analog Devices identifies the AD9631 as a production device, but production status alone does not establish the stock level for a specific AD9631AR suffix and shipment quantity. Include the exact quantity and required delivery date when requesting the quotation.
Does the AD9631AR meet RoHS requirements?
Analog Devices states that the universal single high-speed amplifier evaluation boards associated with the AD9631 family are RoHS Compliant. The AD9631AR itself is an 8-SOIC amplifier rather than an evaluation board, so the appropriate final compliance record should be confirmed for the exact ordering code and package. Use the manufacturer's current product documentation for formal compliance decisions.

Datos de referencia de ingeniería para AD9631AR — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the AD9631AR when a production, high-speed voltage-feedback amplifier must operate reliably at unity gain and fit an 8-SOIC footprint. Its listed 6 V to 12 V supply range and 7 nV/√Hz input-noise density suit receiver, acquisition, filtering, instrumentation, and communications signal-conditioning stages. Select AD9632ANZ instead when the circuit is intentionally designed around gain +2 and the AD9632 family's gain-specific behavior is preferred. The AD9631ARZ and its documented ordering suffixes can be considered for procurement when the electrical function and 8-SOIC footprint remain identical, but the exact packaging and temperature ordering requirements must be checked. No cross-brand drop-in replacement with confirmed pin compatibility was identified in the reviewed manufacturer family material, so an alternative from another manufacturer should not be treated as drop-in without its own pinout and electrical verification.

Comparación con alternativas

Parámetro Este producto AD9631ARZ AD9631ARZ-REEL AD9631ARZ-REEL7 AD9631ARZ-RL AD9631ARZ-R2
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Amplifier Type Voltage Feedback Amplifier Voltage Feedback Voltage Feedback Voltage Feedback Voltage Feedback Voltage Feedback
Channel Count 1 channel 1 channel 1 channel 1 channel 1 channel 1 channel
Operating Supply Voltage 6 V to 12 V 6 V to 12 V 6 V to 12 V 6 V to 12 V 6 V to 12 V 6 V to 12 V
Input Voltage Noise Density 7 nV/√Hz 7 nV/√Hz 7 nV/√Hz 7 nV/√Hz 7 nV/√Hz 7 nV/√Hz
Stable Gain +1 +1 +1 +1 +1 +1
Maximum Power Dissipation 900 mW 900 mW 900 mW 900 mW 900 mW 900 mW
Package Length 5 mm maximum 5 mm maximum 5 mm maximum 5 mm maximum 5 mm maximum 5 mm maximum
Package Height 1.5 mm maximum 1.5 mm maximum 1.5 mm maximum 1.5 mm maximum 1.5 mm maximum 1.5 mm maximum

Diferenciadores clave

  • Unity-gain stability (frente a AD9632ANZ)
  • Compact single-amplifier implementation (frente a AD9631ARZ)
  • Single-supply operating flexibility (frente a AD9631ARZ-REEL7)

Notas de diseño

Place the input, feedback, and output components close to the AD9631AR to minimize parasitic capacitance and trace inductance. Keep high-impedance input nodes physically short and use a continuous ground reference beneath the 8-SOIC footprint. The amplifier is stable at gain +1, but the final stability and distortion behavior still depend on the complete feedback network, source impedance, load, and PCB parasitics.

Use the manufacturer-recommended bypass capacitors at the supply pins and route them through the shortest practical path to the ground plane. The AD9631AR operates from 6 V to 12 V, and supply noise can appear as output noise or reduced headroom. Verify the supply rails at the device under maximum operating current and ensure the source can support the required transient current without causing rail droop.

Treat the AD9631AR as a high-speed circuit even when its bandwidth specification is not being used directly. Avoid long input and feedback traces, keep resistor junctions physically small, and account for capacitance at the feedback node. If the source or load is capacitive, use the manufacturer's guidance for isolation resistors or compensation to prevent peaking and ringing.

Información de cumplimiento

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

Analog Devices states that the universal single high-speed amplifier evaluation boards associated with the AD9631 family are RoHS Compliant. Compliance for the exact AD9631AR ordering code should be confirmed from the manufacturer's current product records.

Datos verificados el: 2026-11-10 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

AD9631AR datasheet AD9631AR pinout AD9631AR datasheet pdf AD9631AR equivalent AD9631AR replacement AD9631AR cross reference AD9631AR vs AD9632ANZ AD9631AR footprint AD9631AR spice model AD9631AR price AD9631AR stock Analog Devices AD9631AR AD9631AR 8-SOIC amplifier AD9631AR photodiode receiver AD9631AR unity gain amplifier

Componentes & términos relacionados

Analog Devices AD9631AR AD9631ARZ AD9631AR-EBZ AD9632ANZ voltage-feedback operational amplifier high-speed amplifier voltage feedback linear amplifier signal-conditioning amplifier 8-SOIC SOIC package family surface-mount package unity-gain stability gain of +1 gain of +2 input-voltage noise density 7 nV/√Hz photodiode receiver data acquisition active filter communications equipment broadband instrumentation RoHS semiconductor
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ