Analog Devices

ADF4159CCPZ-RL7 - 13 GHz Fractional-N PLL | Analog Devices

MPN: ADF4159CCPZ-RL7 ✓ Active
24-lead LFCSP with exposed pad Package 13 GHz Speed
MOQ: 1 |

ADF4159CCPZ-RL7 Overview

The Analog Devices ADF4159CCPZ-RL7 is a 13 GHz fractional-N frequency synthesizer with direct modulation and fast and slow waveform generation in a 24-lead LFCSP package with an exposed pad. It provides a 500 MHz to 13 GHz input range, a 2 GHz maximum output frequency, and a 25-bit fixed modulus that supports sub-hertz frequency resolution. These characteristics place it within the PLL and clock-generator hierarchy of clock and timing integrated circuits.

A fractional-N frequency synthesizer is a clock and timing IC that generates a programmable output frequency from a stable reference. It belongs to the broader sequence of PLL-based frequency synthesizer, clock and timing IC, and semiconductor categories. The fractional-N architecture allows fine frequency spacing without requiring an impractically high reference frequency, making the device useful where precise tuning and rapid phase-lock acquisition are both important.

Principal features include direct modulation, fast waveform generation, slow waveform generation, and a 25-bit fractional-N modulus. The 13 GHz maximum operating frequency supports microwave and RF signal chains, while sub-hertz resolution permits fine channel selection. The low-noise digital phase-frequency detector, precision charge pump, and programmable reference divider provide the core loop functions, although exact divider ratios, lock-time curves, and phase-noise values should be selected from the manufacturer datasheet for the intended reference and loop design.

The ADF4159 architecture combines frequency synthesis with programmable waveform generation to support applications requiring both a synthesized carrier and modulation control. Direct modulation can reduce system complexity by superimposing control information onto the generated output without requiring a separate modulation path in every design. The exact modulation bandwidth, output power, and spur performance remain dependent on reference quality, loop filter design, device settings, and board implementation.

Typical uses include microwave test and measurement, RF signal generators, communications test equipment, frequency conversion systems, and local-oscillator generation. It is also appropriate for laboratory and industrial instrumentation where programmable RF output, fine resolution, and fast acquisition are more important than minimum unit cost. The exposed-pad LFCSP construction supports compact layouts, although careful thermal and return-path design is required.

When laying out the circuit, follow the manufacturer datasheet when assigning pins, selecting loop-filter components, placing decoupling capacitors, and routing the RF and reference paths. Keep the reference and RF connections short, maintain a controlled ground return around the exposed pad, and verify lock behavior across temperature, supply voltage, and output-frequency ranges before production.

This page combines the ADF4159 architecture, package details, replacement comparisons, application guidance, and practical design considerations in one engineering-focused reference. It also highlights where pin-compatible alternatives differ in operating range or qualification so that replacements can be evaluated without overlooking functional constraints.

Drop-in alternatives for ADF4159CCPZ-RL7 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with ADF4159CCPZ-RL7 (same form factor and footprint) — differing in Package, Frequency Resolution, Maximum Output Frequency, Product Type.

Analog Devices
Package: 24-lead WFQFN exposed-pad CSP
Frequency Resolution: Subhertz
Product Type: Fractional-N frequency synthesizer with modulation and waveform generation
Compare with ADF4159CCPZ-RL7 →
Analog Devices
Package: 24-lead LFCSP-WQ, 4 x 4 mm
Maximum Output Frequency: 13.5 GHz
Product Type: Fractional-N frequency synthesizer
Compare with ADF4159CCPZ-RL7 →

ADF4159WCCPZ-RL7

✅ Drop-In
📦 24-lead LFCSP (CP-24) with exposed pad
Automotive-qualified family option with the same 13 GHz maximum RF input frequency; operating range is 0% different at the headline frequency.

📋 Reference alternative (not in catalog)

ADF4169CCPZ-RL7

✅ Drop-In
Analog Devices
📦 24-lead LFCSP (CP-24) with exposed pad
Fractional-N frequency synthesizer · 13.5 GHz · 1 · 25 bit · Sub-hertz · Direct modulation · Fast and slow waveform generation · Low-noise digital PFD

Contact for price

View Datasheet →

ADF4169WCCPZ-RL7

✅ Drop-In
📦 24-lead LFCSP (CP-24) with exposed pad
Automotive-qualified 12 GHz maximum RF input option versus 13 GHz for the target, a reduction of approximately 7.7%; pinout and package are shared.

📋 Reference alternative (not in catalog)

ADF4159CCPZ

✅ Drop-In
Analog Devices
📦 24-lead LFCSP (CP-24) with exposed pad
Fractional-N frequency synthesizer with modulation and waveform generation · 13 GHz · 25 bit · Subhertz · 110 MHz · CMOS · CMOS · 1 output

Contact for price

View Datasheet →

ADF4159CCPZ-RL7 Specifications

Device Type Fractional-N frequency synthesizer and PLL
Maximum RF Input Frequency 13 GHz
Minimum RF Input Frequency 500 MHz
Maximum Output Frequency 2 GHz
Fractional-N Fixed Modulus 25 bit
Frequency Resolution Sub-hertz
Modulation Capability Direct modulation
Waveform Generation Fast and slow waveform generation
Phase Detector Low-noise digital phase-frequency detector
Charge Pump Precision charge pump
Reference Divider Programmable
Package 24-lead LFCSP with exposed pad
Package Code CP-24
Shipping Format Tape and reel

ADF4159CCPZ-RL7 cp-24 Pin Configuration Guide

Pin configuration for ADF4159CCPZ-RL7 (cp-24 package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

cp-24 package pinout diagram for ADF4159CCPZ-RL7

No detailed pinout data available for ADF4159CCPZ-RL7.

Refer to the datasheet for full pin configuration.

Typical Applications

ADF4159CCPZ-RL7 is suitable for 6 applications: Microwave Signal Generators, RF Communications Test Equipment, Local Oscillator Generation, Industrial RF Measurement, Frequency-Modulated Waveform Generation, Laboratory Frequency Calibration.

📡

Microwave Signal Generators

The ADF4159CCPZ-RL7 fits microwave signal-generator front ends that require programmable output and fine frequency spacing. Its 500 MHz to 13 GHz input range and 25-bit fixed modulus support sub-hertz resolution, while direct modulation can place control information directly on the synthesized waveform. The 2 GHz maximum output frequency covers demanding test and measurement channels within that range. Designers should use the manufacturer loop-filter guidance, preserve a short RF return path, and verify phase noise and spurious performance with the intended reference oscillator. The exposed thermal pad requires adequate copper and via support so that temperature rise does not shift acquisition behavior or disturb the output reference.

🌐

RF Communications Test Equipment

The ADF4159CCPZ-RL7 is appropriate for communications test equipment that must synthesize accurately spaced RF channels. A 25-bit fixed modulus provides sub-hertz theoretical resolution, and the 500 MHz to 13 GHz input range offers broad reference-channel coverage for instrumentation operating below the 2 GHz output ceiling. Direct modulation and programmable waveform generation can simplify channel stimulus and modulation tests. The main engineering constraints are reference phase noise, loop bandwidth, output-power calibration, and spur control. Use short, impedance-controlled RF routing, a return path referenced to the exposed pad, and the manufacturer application circuit as the baseline before adding frequency-dependent gain correction or external attenuators.

📶

Local Oscillator Generation

The ADF4159CCPZ-RL7 can generate a programmable local oscillator for RF mixers, receivers, and frequency-conversion stages requiring precise channel selection. Its fractional-N architecture supports fine tuning without relying solely on coarse channel spacing, and direct modulation offers a path to fast frequency or phase control when the receiver architecture permits it. Because the device reaches 13 GHz at its RF input and produces up to 2 GHz, system planners should distinguish the synthesizer input band from the final output band and account for divider settings. Reference spurs, phase noise, leakage, and loop filter component tolerances must be included in the receiver error budget. The exposed pad should be tied to the supply and ground plane according to the recommended land pattern.

🏭

Industrial RF Measurement

The ADF4159CCPZ-RL7 supports industrial RF measurement systems that need digitally controlled, repeatable frequency generation. The 13 GHz headline input capability, 25-bit fixed modulus, and programmable reference divider allow a single synthesizer architecture to cover numerous instrument ranges through divider programming. Direct modulation is useful when the test source must reproduce modulated conditions, while fast and slow waveform generation adds flexibility for controlled sweeps. Calibration across the full output band is necessary because RF losses and board parasitics vary with frequency. Place the reference and charge-pump components close to their pins, provide low-inductance supply connections, and include the exposed pad in the thermal model when predicting temperature drift.

📈

Frequency-Modulated Waveform Generation

The ADF4159CCPZ-RL7 is suited to systems that need programmable modulation as well as a synthesized carrier. Direct modulation can reduce the number of separate RF modulation chains, while fast and slow waveform generation supports different modulation trajectories within a single synthesizer design. The 500 MHz to 13 GHz RF input range and 2 GHz maximum output provide a broad operating framework for waveform test and simulation systems. Engineers must still confirm the usable modulation bandwidth, output level, and distortion from the manufacturer datasheet and application circuit. Keep modulation and digital-control traces away from sensitive reference nodes, and validate filtering and amplitude response across the intended waveform bandwidth rather than assuming carrier frequency alone defines performance.

🧪

Laboratory Frequency Calibration

The ADF4159CCPZ-RL7 can act as the synthesis element in a laboratory calibration source where fine frequency resolution and programmable control are important. Its sub-hertz resolution and programmable reference architecture are useful for generating closely spaced test tones or calibration points, while the 25-bit fixed modulus allows detailed channel planning. The same architecture can support automated sweep and modulation experiments through its digital control interface. Measurement accuracy will be limited by the external reference, divider accuracy, loop phase noise, and calibration procedure rather than the nominal resolution alone. Use a low-noise reference with a suitable isolation arrangement, validate the loop filter against the desired acquisition time, and preserve ground continuity under the exposed pad during repeated thermal cycling.

Recommended Products Summary

ADF4159 Base family frequency-synthesizer device Used in: Microwave Signal Generators, RF Communications Test Equipment, Local Oscillator Generation, Industrial RF Measurement, Frequency-Modulated Waveform Generation, Laboratory Frequency Calibration EVAL-ADF4159 Manufacturer evaluation board for the ADF4159 family Used in: Microwave Signal Generators, RF Communications Test Equipment, Industrial RF Measurement, Frequency-Modulated Waveform Generation, Laboratory Frequency Calibration ADF4159WCCPZ-RL7 Automotive-qualified same-package family option Used in: Microwave Signal Generators, Industrial RF Measurement ADF4169CCPZ-RL7 Analog Devices Used in: RF Communications Test Equipment ADF4107BRU-REEL Analog Devices Used in: Local Oscillator Generation ADF4106BRU-REEL Analog Devices Used in: Local Oscillator Generation ADF4169WCCPZ-RL7 Pin-compatible automotive waveform-generator option Used in: Frequency-Modulated Waveform Generation ADF4107BCP-REEL Analog Devices Used in: Laboratory Frequency Calibration
What is the ADF4159CCPZ-RL7?
The ADF4159CCPZ-RL7 is a 13 GHz fractional-N frequency synthesizer with direct modulation and fast and slow waveform generation. According to the Analog Devices product page and manufacturer datasheet, it uses a 25-bit fixed modulus for sub-hertz frequency resolution and is packaged in a 24-lead LFCSP with an exposed pad. It is intended for precise RF clock generation, modulation, and frequency-control systems.
What frequency range does the ADF4159CCPZ-RL7 support?
The ADF4159CCPZ-RL7 supports RF input frequencies from 500 MHz to 13 GHz and has a maximum output frequency of 2 GHz. The Analog Devices product page identifies the device as a 13 GHz fractional-N frequency synthesizer, while distributor specifications list the 500 MHz lower input limit. These figures define the operating envelope that must be checked against the intended reference and channel plan.
What is the maximum output frequency of the ADF4159CCPZ-RL7?
The maximum output frequency of the ADF4159CCPZ-RL7 is 2 GHz. This value is listed in the exact-part distributor specifications for the device and is lower than its 13 GHz maximum RF input frequency. Use the manufacturer datasheet to select divider settings and verify that the requested output frequency, modulation mode, and reference configuration are simultaneously supported.
Where can I download the ADF4159CCPZ-RL7 datasheet PDF?
The official ADF4159CCPZ-RL7 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4159.pdf. The manufacturer product page is at https://www.analog.com/en/products/adf4159.html. These documents contain the authoritative pin descriptions, register information, electrical characteristics, application circuit, and recommended implementation details.
Where is the pinout for the ADF4159CCPZ-RL7?
The pinout for the ADF4159CCPZ-RL7 is located in the pin-description table of the official Analog Devices ADF4159 datasheet. The device uses a 24-lead LFCSP CP-24 package with an exposed pad. Use that table when assigning supply, ground, reference, RF, charge-pump, and digital-control connections, and preserve the exposed-pad thermal and electrical requirements shown in the land-pattern guidance.
Is ADF4159CCPZ-RL7 suitable for RF signal generation?
The ADF4159CCPZ-RL7 is suitable for RF signal-generation systems requiring programmable frequency, direct modulation, and fractional-N resolution. Its 500 MHz to 13 GHz input range, 2 GHz maximum output, and 25-bit fixed modulus support fine-grained frequency planning according to the Analog Devices datasheet. Suitability still depends on loop bandwidth, phase-noise targets, output power, spur limits, and modulation bandwidth.
What can replace the ADF4159CCPZ-RL7?
The closest documented pin-compatible replacement is the ADF4169CCPZ-RL7 in the same 24-lead CP-24 LFCSP, although its maximum RF frequency is lower than the ADF4159CCPZ-RL7's 13 GHz limit. The ADF4159WCCPZ-RL7 is another same-package family option with automotive qualification. Confirm register compatibility, operating range, modulation bandwidth, and qualification before assigning either part as a production replacement.
Is the ADF4169CCPZ-RL7 the same as the ADF4159CCPZ-RL7?
No. The ADF4169CCPZ-RL7 uses the same 24-lead LFCSP footprint and pin arrangement, but its maximum RF input frequency is 12 GHz rather than the ADF4159CCPZ-RL7's 13 GHz, a reduction of approximately 7.7%. The shared package makes PCB reuse possible, while register behavior and operating limits still require verification against the manufacturer documentation before substitution.
When should I choose the ADF4159CCPZ-RL7 over the ADF4159WCCPZ-RL7?
Choose the ADF4159CCPZ-RL7 for standard industrial or commercial designs that require the 13 GHz fractional-N performance without the automotive qualification of the W variant. Select the ADF4159WCCPZ-RL7 when the design requires the corresponding automotive-qualified family option. Both use the 24-lead CP-24 LFCSP, so the decision should be based on qualification, temperature requirements, and verified electrical specifications rather than footprint alone.
What is the best Analog Devices equivalent for the ADF4159CCPZ-RL7?
The best same-package Analog Devices alternatives depend on the highest required RF frequency. The ADF4169CCPZ-RL7 provides a pin-compatible 24-lead LFCSP option up to 12 GHz, while the ADF4159WCCPZ-RL7 preserves the 13 GHz family performance with automotive qualification. For a direct design substitution, verify the complete register map, reference-divider range, modulation bandwidth, and lifecycle requirements before release.
Where can I buy the ADF4159CCPZ-RL7 online?
Use the Request a Quote form on this page to request the exact ADF4159CCPZ-RL7, current lead time, and stock status. The part is identified as a 24-lead LFCSP tape-and-reel orderable component. Providing the complete MPN helps avoid confusion with the automotive-qualified ADF4159WCCPZ-RL7 or other ADF4159 package and temperature variants.
What is the price of the ADF4159CCPZ-RL7?
The current unit price for the ADF4159CCPZ-RL7 is shown through the Request a Quote workflow on this page. Submit the exact MPN and required quantity for a current quotation. Because the orderable code identifies the 24-lead LFCSP tape-and-reel configuration, do not substitute the automotive-qualified W suffix when requesting the standard part.
What is the lead time for the ADF4159CCPZ-RL7?
The current lead time for the ADF4159CCPZ-RL7 should be requested through the Request a Quote form on this page. Include the intended quantity, shipping destination, and target date in the request. The exact orderable MPN is ADF4159CCPZ-RL7, which identifies the standard 24-lead LFCSP device in tape-and-reel format.
Is the ADF4159CCPZ-RL7 in stock?
Current inventory for the ADF4159CCPZ-RL7 should be confirmed through the Request a Quote form on this page. Include the required order quantity so the response can reflect an executable allocation rather than a generic device listing. The request should state the full suffix exactly because ADF4159WCCPZ-RL7 is a different automotive-qualified orderable variant.
What are the key specifications of the ADF4159CCPZ-RL7 that engineers should know?
The key specifications are a 500 MHz to 13 GHz RF input range, 2 GHz maximum output frequency, 25-bit fixed modulus, sub-hertz resolution, direct modulation, and fast and slow waveform generation. The Analog Devices datasheet also describes a low-noise digital phase-frequency detector, precision charge pump, and programmable reference divider. The device is supplied in a 24-lead LFCSP CP-24 package with an exposed pad.

Engineering reference data for ADF4159CCPZ-RL7 — comparison, design guidance, and compliance information.

Selection Guide

Choose the ADF4159CCPZ-RL7 when the design needs a 13 GHz maximum RF input, sub-hertz fractional-N resolution, direct modulation, and both fast and slow waveform generation in a 24-lead LFCSP. Select ADF4159WCCPZ-RL7 when the same headline RF range and package are needed but the automotive-qualified W variant is required. Consider ADF4169CCPZ-RL7 for pin-compatible designs whose maximum input requirement is no more than 12 GHz, and use ADF4169WCCPZ-RL7 when both that lower input ceiling and automotive qualification are acceptable. ADF4159CCPZ can be evaluated when the required shipping configuration matches that ordering code. In every case, shared package geometry does not by itself prove register, bandwidth, phase-noise, or lifecycle equivalence. Confirm those characteristics against the manufacturer datasheet before using an alternative as a drop-in production replacement.

Comparison with Alternatives

Parameter This Product ADF4159WCCPZ-RL7 ADF4169CCPZ-RL7 ADF4169WCCPZ-RL7 ADF4159CCPZ
Package 24-lead LFCSP (CP-24) with exposed pad 24-lead LFCSP (CP-24) with exposed pad 24-lead LFCSP (CP-24) with exposed pad 24-lead LFCSP (CP-24) with exposed pad 24-lead LFCSP (CP-24) with exposed pad
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Maximum RF Input Frequency 13 GHz 13 GHz 12 GHz 12 GHz 13 GHz

Key Differentiators

  • Higher maximum RF input frequency than the ADF4169 alternatives (vs ADF4169CCPZ-RL7)
  • Direct modulation with fast and slow waveform generation (vs ADF4107BRU-REEL)
  • Sub-hertz fractional-N resolution (vs ADF4169WCCPZ-RL7)
  • Same 24-lead footprint across identified family alternatives (vs ADF4159WCCPZ-RL7)

Design Notes

Follow the manufacturer land pattern for the 24-lead CP-24 LFCSP and connect the exposed pad to the ground plane with multiple thermal and electrical vias. Keep the reference input, charge-pump connection, and decoupling components close to their associated pins. A short, continuous ground return is more important than an elaborate external ground connection because RF phase noise and accidental modulation can increase when loop-current paths become inductive.

Treat the reference path as a high-purity signal path even though its operating frequency may be below the RF output. Route it away from the RF output and switching-node areas, use a controlled impedance, and decouple supply pins near the device. When evaluating loop performance, use the same reference, filter, and board construction intended for production because parasitic inductance in the charge-pump and filter nodes can alter damping and acquisition behavior.

Validate direct-modulation bandwidth, output level, phase noise, and spurious signals with the final reference oscillator and loop-filter values. The sub-hertz frequency resolution is a synthesis capability, not a guarantee of absolute accuracy; reference error, divider quantization, leakage, and calibration determine realized accuracy. Keep modulation-control traces short and isolated from the reference and charge-pump nodes to reduce coupling into the synthesized carrier.

The exposed pad is the primary path for removing package heat. Estimate junction temperature from the actual dissipation and board thermal resistance, then verify it across ambient temperature, output frequency, and supply conditions. Use a copper area and via pattern consistent with the manufacturer recommendation. Avoid placing a thermally restrictive cutout beneath the pad, since an isolated pad can raise operating temperature and alter RF performance during long laboratory or industrial measurements.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The exact-part sources do not explicitly state the compliance status of ADF4159CCPZ-RL7. The W suffix identifies an automotive-qualified family option, but automotive qualification must not be assumed for the standard target MPN.

Related Searches

ADF4159CCPZ-RL7 datasheet ADF4159CCPZ-RL7 pinout ADF4159CCPZ-RL7 datasheet pdf ADF4159CCPZ-RL7 equivalent ADF4159CCPZ-RL7 replacement ADF4159CCPZ-RL7 price ADF4159CCPZ-RL7 stock ADF4159CCPZ-RL7 LFCSP-24 ADF4159CCPZ-RL7 vs ADF4169CCPZ-RL7 13 GHz fractional-N PLL ADF4159 direct modulation frequency synthesizer ADF4159CCPZ-RL7 application circuit Analog Devices ADF4159CCPZ-RL7 ADF4159 25-bit fixed modulus ADF4159CCPZ-RL7 LFCSP footprint

Related Components & Terms

Analog Devices ADF4159CCPZ-RL7 ADF4159 ADF4159WCCPZ-RL7 ADF4169CCPZ-RL7 ADF4169WCCPZ-RL7 ADF4159CCPZ EVAL-ADF4159 fractional-N frequency synthesizer phase-locked loop PLL clock and timing IC frequency synthesizer direct modulation fast waveform generation slow waveform generation 25-bit fixed modulus sub-hertz frequency resolution digital phase-frequency detector precision charge pump programmable reference divider 24-lead LFCSP CP-24 package exposed pad surface-mount semiconductor
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details