Analog Devices

ADF4212BRUZ-RL7 - 2.7 GHz PLL Frequency Synthesizer | Analog Devices

MPN: ADF4212BRUZ-RL7 ✓ Active
2.7 V to 5.5 V Vdss Programmable Id 20-pin TSSOP, 4.40 mm width Package 2.7 GHz Speed
MOQ: 1 |

ADF4212BRUZ-RL7 Overview

The Analog Devices ADF4212BRUZ-RL7 is a dual PLL clock and frequency synthesizer IC with a maximum RF/IF operating frequency of 2.7 GHz, a 2.7 V to 5.5 V supply range, and a 20-pin TSSOP package. The -RL7 ordering option identifies the tape-and-reel package, while the RUZ suffix identifies the 20-pin TSSOP form factor.

A PLL, or phase-locked loop, is a feedback-controlled frequency-generation system. It compares a reference signal with a divided output signal, drives a voltage-controlled oscillator or VCO through a loop filter, and locks the output to the reference. The ADF4212 family provides programmable dual-modulus prescalers, programmable charge-pump currents, a 3-wire serial interface, lock detection, Fastlock operation, and a separate charge-pump supply for extended tuning-voltage range in 3 V systems.

Key features include RF and IF prescaler options of 8/9, 16/17, 32/33, and 64/65. The architecture supports RF synthesis up to 2.7 GHz and IF synthesis up to 1.0 GHz. Programmable charge-pump currents allow loop bandwidth and phase-noise performance to be adjusted with the external loop filter, while the 15-bit reference counter allows selectable reference frequencies at the phase-frequency detector input.

The ADF4212 is configured through a simple 3-wire serial interface. Analog and digital lock-detect functions provide status information for system control, and Fastlock mode can reduce acquisition time in frequency-hopping or rapidly retuned systems. A separate VP charge-pump supply allows the tuning-voltage headroom to be expanded when the main supply is only 3 V.

Typical uses include wireless receiver and transmitter local oscillators, RF up-conversion and down-conversion sections, IF signal chains, instrumentation, and frequency-generation modules. The 20-pin TSSOP package supports surface-mount PCB construction while keeping the design within a compact footprint.

For implementation, place the reference and charge-pump components close to the device and design the external loop filter for the intended phase-noise and lock-time requirements. Confirm prescaler, divider, charge-pump, and register settings against the application note and evaluate lock behavior across temperature and supply variation.

This product page combines the manufacturer product information, distributor package and ordering details, direct replacement candidates, and practical PLL design guidance to support component selection, PCB planning, and frequency-synthesizer implementation.

Drop-in alternatives for ADF4212BRUZ-RL7 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with ADF4212BRUZ-RL7 (same form factor and footprint) — differing in Package.

Analog Devices
Package: 20-lead TSSOP, 4.40 mm width
Compare with ADF4212BRUZ-RL7 →

ADF4212BRUZ-RL

✅ Drop-In
📦 20-pin TSSOP
Same ADF4212 function, 2.7 GHz maximum RF frequency, and 20-pin TSSOP footprint; -RL tape-and-reel packing replaces the target's -RL7 7-inch reel ordering option.

📋 Reference alternative (not in catalog)

ADF4212BRUZ

✅ Drop-In
Analog Devices
📦 20-pin TSSOP
Dual phase-locked-loop clock/frequency synthesizer IC · 2.7 GHz · 1.0 GHz · 2.7 V to 5.5 V · Yes · 8/9, 16/17, 32/33, and 64/65 · Programmable · 3-wire

Contact for price

View Datasheet →

ADF4212BRUZ-RL7 Specifications

Product Type Dual PLL clock and frequency synthesizer IC
Maximum RF Frequency 2.7 GHz
Maximum IF Frequency 1.0 GHz
Minimum RF Frequency 0 MHz
Power Supply Voltage Range 2.7 V to 5.5 V
Charge Pump Supply Separate VP supply
RF Prescaler Ratios 8/9, 16/17, 32/33, and 64/65
IF Prescaler Ratios 8/9, 16/17, 32/33, and 64/65
Charge Pump Current Programmable
Control Interface 3-wire serial interface
Reference Counter 15-bit
Lock Detection Analog and digital
Acquisition Mode Fastlock mode
Power-Down Mode Supported
Number of Pins 20 pins
Package 20-pin TSSOP, 4.40 mm width
Mounting Type Surface mount
Operating Temperature Range -40 °C to +85 °C

ADF4212BRUZ-RL7 20-pin tssop, 4.40 mm width Pin Configuration Guide

Pin configuration for ADF4212BRUZ-RL7 (20-pin tssop, 4.40 mm width package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

20-pin tssop, 4.40 mm width package pinout diagram for ADF4212BRUZ-RL7

No detailed pinout data available for ADF4212BRUZ-RL7.

Refer to the datasheet for full pin configuration.

Typical Applications

ADF4212BRUZ-RL7 is suitable for 6 applications: Wireless Transmitter Local Oscillator, Wireless Receiver Down-Conversion, RF Up-Conversion Local Oscillator, Frequency Instrumentation Signal Source, IF Signal-Chain Frequency Generation, Frequency-Hopping Communication System.

🌐

Wireless Transmitter Local Oscillator

The ADF4212BRUZ-RL7 fits a wireless transmitter local-oscillator stage because its RF synthesizer reaches 2.7 GHz and its programmable prescalers support multiple RF operating ratios. The 3-wire interface allows the transmitter controller to configure frequency-divider, prescaler, and charge-pump registers during channel changes. A separate VP supply can increase the tuning-voltage range of the external VCO, while Fastlock supports faster acquisition in frequency-hopping systems. The external loop filter and VCO must still be tuned for the target channel spacing, phase-noise limit, and lock-time requirement.

📱

Wireless Receiver Down-Conversion

The ADF4212BRUZ-RL7 can generate receiver local-oscillator signals for RF down-conversion and separate IF synthesis. Its maximum RF frequency of 2.7 GHz and maximum IF frequency of 1.0 GHz cover common wireless conversion architectures, while programmable RF and IF prescalers provide design flexibility. Analog and digital lock outputs let the receiver firmware confirm lock before enabling signal processing. Board-level filtering, reference routing, and loop-filter layout remain essential for reliable phase noise and conversion performance.

⚡

RF Up-Conversion Local Oscillator

For RF up-conversion, the ADF4212BRUZ-RL7 supplies a programmable local-oscillator reference derived from a stable system reference. The 2.7 GHz maximum RF frequency supports transmit and mixer drive architectures in the supported operating range, while the 15-bit reference counter permits selectable reference frequencies at the phase-frequency detector input. The separate charge-pump supply is useful when the external VCO needs additional tuning range. Reference spurs and phase noise should be evaluated against the receiver sensitivity budget.

🔧

Frequency Instrumentation Signal Source

The ADF4212BRUZ-RL7 is suitable as the PLL core in a programmable frequency-source module where a single reference must generate an RF or IF output. Its programmable dividers, prescalers, charge-pump currents, and Fastlock mode provide the controls needed to balance resolution against acquisition time. The 20-pin TSSOP supports compact surface-mount assemblies, although the external reference buffer, loop filter, VCO, and output chain remain separate components. Firmware should verify lock after every frequency update and report faults through the digital lock signal.

🖥️

IF Signal-Chain Frequency Generation

The ADF4212BRUZ-RL7's IF synthesizer can operate up to 1.0 GHz, making it appropriate for IF-generation blocks in receivers, transmitters, and test equipment. Independent RF and IF prescaler choices of 8/9, 16/17, 32/33, and 64/65 permit the divider architecture to be matched to the desired channel plan. Fastlock mode is useful when the system changes IF frequency frequently, while lock detection supports deterministic sequencing. Component selection for the loop filter and VCO should follow the required phase-noise, spur, and lock-time specifications.

🧩

Frequency-Hopping Communication System

The ADF4212BRUZ-RL7 fits frequency-hopping systems because Fastlock mode is designed to support faster lock acquisition when the synthesizer changes channels. Its 2.7 GHz RF range, programmable prescalers, and programmable charge-pump currents allow the acquisition behavior and tuning plan to be optimized. The 3-wire interface simplifies host control, and the analog or digital lock indication can gate transmission until the local oscillator is valid. Rapid hopping performance must be verified with the actual reference, VCO, loop filter, temperature range, and channel sequence.

Recommended Products Summary

ADF4212BRUZ-RL Same ADF4212 PLL in a tape-and-reel ordering option Used in: Wireless Transmitter Local Oscillator, RF Up-Conversion Local Oscillator, IF Signal-Chain Frequency Generation ADF4212BRUZ Analog Devices Used in: Wireless Receiver Down-Conversion, Frequency Instrumentation Signal Source, Frequency-Hopping Communication System
What is the ADF4212BRUZ-RL7?
The ADF4212BRUZ-RL7 is a dual phase-locked-loop clock and frequency synthesizer from Analog Devices. According to the manufacturer product page, it supports RF synthesis up to 2.7 GHz and IF synthesis up to 1.0 GHz from a 2.7 V to 5.5 V supply. It is packaged in a 20-pin TSSOP and uses a 3-wire serial interface for register control.
What are the key specifications of ADF4212BRUZ-RL7 that engineers should know?
The ADF4212BRUZ-RL7 combines a maximum RF frequency of 2.7 GHz, a maximum IF frequency of 1.0 GHz, and a 2.7 V to 5.5 V supply range in a 20-pin TSSOP package. The Analog Devices product page identifies programmable RF and IF prescalers, programmable charge-pump currents, analog and digital lock detection, Fastlock mode, power-down operation, and a separate VP charge-pump supply.
Where can I download the ADF4212BRUZ-RL7 datasheet PDF?
The official ADF4212 product page at Analog Devices is the primary location for technical documentation and ordering information. A separate hosted ADF4212BRUZ-RL7 PDF is also listed at https://pdf.digi-electronics.com/pdf/1471/ADF4212BRUZRL7-datasheet.pdf. Use the manufacturer document for final design decisions because it contains the authoritative register and electrical details.
Where can I find the ADF4212BRUZ-RL7 pinout?
The ADF4212BRUZ-RL7 pin assignment is defined by the 20-pin TSSOP pin-description table in the Analog Devices ADF4212 documentation. Use that table when assigning signals and PCB tracks because it includes the supply, ground, reference, synthesizer, control, and lock-detect connections. The product listing confirms the 20-pin TSSOP package and 4.40 mm body width.
What prescaler ratios does the ADF4212 support?
The ADF4212 supports programmable RF and IF dual-modulus prescaler ratios of 8/9, 16/17, 32/33, and 64/65. According to the Analog Devices product page, these choices support the ADF4212 family's 1.0 GHz IF and 2.7 GHz RF operating ranges. The selected ratio must be coordinated with the N-counter settings and VCO frequency plan.
What supply voltage does the ADF4212BRUZ-RL7 require?
The ADF4212BRUZ-RL7 operates from a 2.7 V to 5.5 V power supply. The Analog Devices product page also states that a separate VP charge-pump supply permits extended tuning voltage in 3 V systems. This separation is important when the external VCO requires more tuning-voltage headroom than the main device supply can provide.
How is the ADF4212BRUZ-RL7 programmed?
The ADF4212BRUZ-RL7 is programmed through a 3-wire serial interface. According to the Analog Devices product page, all on-chip registers are controlled by this interface, including the prescaler, frequency-divider, charge-pump, lock-detection, and Fastlock settings. Firmware must sequence register writes correctly and verify the returned lock status during initialization.
Can ADF4212BRUZ-RL7 be used for wireless receiver and transmitter local oscillators?
Yes, the ADF4212BRUZ-RL7 is suitable for wireless receiver and transmitter local-oscillator generation. Its programmable RF and IF synthesizers reach 2.7 GHz and 1.0 GHz, respectively, while the separate charge-pump supply supports wider VCO tuning range. The external loop filter and RF layout remain critical to achieving the intended phase noise and lock performance.
What is the difference between ADF4212BRUZ and ADF4212BRUZ-RL7?
ADF4212BRUZ and ADF4212BRUZ-RL7 are both 20-pin TSSOP ADF4212 devices, and the available comparison identifies the same 0 MHz to 2.7 GHz frequency range and pin count. The ordering suffixes distinguish the packaging configuration: ADF4212BRUZ is listed as tube-packed, while ADF4212BRUZ-RL7 is a tape-and-reel ordering option. The RL7 variant is therefore the preferred assembled-board option for reel-fed manufacturing.
Can ADF4212BRUZ-RL replace ADF4212BRUZ-RL7?
ADF4212BRUZ-RL is the closest direct ordering alternative identified for the target because it uses the same ADF4212 circuit, 20-pin TSSOP package, and 2.7 GHz maximum RF frequency. The difference is the reel or tape packaging suffix rather than a functional change. Confirm the Analog Devices ordering information and inspect the shipping package before treating the parts as manufacturing interchangeable.
What can replace ADF4212BRUZ-RL7?
ADF4212BRUZ-RL is the direct same-family replacement candidate because it retains the ADF4212 architecture, 20-pin TSSOP footprint, and 2.7 GHz maximum RF frequency. The -RL suffix identifies the tape-and-reel packaging option, while the -RL7 target is the 7-inch reel ordering form. Validate the specific Analog Devices ordering code before production use.
What is the best Analog Devices equivalent for ADF4212BRUZ-RL7?
The best identified Analog Devices equivalent is ADF4212BRUZ-RL because it uses the same ADF4212 PLL function and 20-pin TSSOP footprint while using the -RL tape-and-reel ordering suffix. The target uses the -RL7 7-inch reel form. No cross-manufacturer drop-in equivalent with verified pin compatibility and parametric matching was identified.
When should I choose ADF4212BRUZ-RL7 over ADF4208BRUZ?
Choose ADF4212BRUZ-RL7 when the design needs the ADF4212 family's RF frequency range up to 2.7 GHz and IF capability up to 1.0 GHz. The ADF4208 appears in comparison listings as another 20-pin TSSOP PLL, but those listings do not establish identical RF limits, prescaler options, register maps, or tuning performance. Verify those functional details before treating either device as a substitute.
Where can I buy ADF4212BRUZ-RL7 and check its availability?
Use the Request a Quote form on this page to request current ADF4212BRUZ-RL7 availability, lead time, and commercial terms for your required quantity. The distributor listing identifies the part as a 2.7 GHz, single-circuit clock and frequency synthesizer in a 20-pin TSSOP package. The ordering option shown for this product is tape and reel.
What is the lead time for ADF4212BRUZ-RL7?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. The product information confirms the exact MPN, 20-pin TSSOP package, -RL7 tape-and-reel ordering option, and -40 °C to +85 °C operating-temperature grade. Factory lead time can vary with quantity and inventory status, so confirm it before committing a production schedule.

Engineering reference data for ADF4212BRUZ-RL7 — comparison, design guidance, and compliance information.

Selection Guide

Choose ADF4212BRUZ-RL7 for a 2.7 GHz-class RF or 1.0 GHz-class IF synthesizer design that uses a 20-pin TSSOP, a 3-wire control interface, and a separate charge-pump supply. It is a practical production choice when the assembly process requires the -RL7 7-inch reel ordering form. Choose ADF4212BRUZ-RL when its -RL reel format is preferred and the underlying ADF4212 electrical configuration is unchanged. Choose ADF4212BRUZ when tube packaging is more suitable for the manufacturing flow or handling method. ADF4208BRUZ shares the visible 20-pin TSSOP format but lacks verified equivalence in maximum RF frequency, prescaler choices, register compatibility, and tuning performance, so it should be treated as a redesign candidate rather than a guaranteed drop-in replacement. No cross-manufacturer drop-in candidate with verified pin and parameter matching was identified.

Comparison with Alternatives

Parameter This Product ADF4212BRUZ-RL ADF4212BRUZ
Brand Analog Devices Analog Devices Analog Devices
Package 20-pin TSSOP 20-pin TSSOP - same 20-pin TSSOP - same
Product Type Dual PLL clock and frequency synthesizer IC Dual PLL clock and frequency synthesizer IC Dual PLL clock and frequency synthesizer IC
Maximum RF Frequency 2.7 GHz 2.7 GHz 2.7 GHz
Maximum IF Frequency 1.0 GHz 1.0 GHz 1.0 GHz
Power Supply Range 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V
Control Interface 3-wire serial interface 3-wire serial interface 3-wire serial interface
Ordering Packing -RL7 tape and reel -RL tape and reel Tube

Key Differentiators

  • Higher RF tuning range within the identified drop-in set (vs ADF4208BRUZ)
  • Production-oriented reel ordering option (vs ADF4212BRUZ)
  • Direct same-family tape-and-reel alternative (vs ADF4212BRUZ-RL)

Design Notes

Keep the reference input, charge-pump components, loop-filter network, and sensitive ground paths compact and physically separated from noisy switching nodes. Route the reference trace away from RF and digital return currents, use a continuous ground reference, and place the loop-filter components where their ground returns will not share high-current paths with the VCO or digital processor.

Coordinate the prescaler, N-divider, reference-counter, and charge-pump register values with the intended VCO range. A mismatched prescaler or divider program can produce an incorrect output frequency or prevent lock even though the reference and supplies are valid. After each frequency change, read the lock status and allow the loop to settle before enabling downstream circuitry.

Use the separate VP charge-pump supply to obtain the tuning-voltage range required by the external VCO, especially in 3 V systems. Confirm the maximum VP voltage against the Analog Devices electrical limits and design the regulator for low-noise operation. Decouple both the main supply and VP supply close to the device, and verify startup sequencing against the selected VCO and charge-pump configuration.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current Analog Devices product documentation or declaration. AEC-Q100 qualification is not applicable to this industrial-temperature PLL product.

Related Searches

ADF4212BRUZ-RL7 datasheet ADF4212BRUZ-RL7 pinout ADF4212BRUZ-RL7 datasheet pdf ADF4212BRUZ-RL7 equivalent ADF4212BRUZ-RL7 replacement ADF4212BRUZ-RL7 price ADF4212BRUZ-RL7 stock Analog Devices ADF4212BRUZ-RL7 ADF4212BRUZ-RL7 20 pin TSSOP ADF4212 2.7 GHz PLL ADF4212 wireless local oscillator ADF4212BRUZ-RL7 vs ADF4208BRUZ ADF4212BRUZ-RL7 application circuit ADF4212BRUZ-RL7 cross reference

Related Components & Terms

Analog Devices ADF4212BRUZ-RL7 ADF4212BRUZ-RL ADF4212BRUZ ADF4208BRUZ dual PLL phase-locked loop frequency synthesizer clock generator voltage-controlled oscillator dual-modulus prescaler phase-frequency detector charge pump 3-wire serial interface Fastlock mode analog lock detection digital lock detection 20-pin TSSOP TSSOP package family surface-mount package 2.7 GHz RF synthesis 1.0 GHz IF synthesis frequency hopping wireless local oscillator
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details