ADSP-2105BP-55-G - 25 MHz 16-Bit DSP | Analog Devices
MPN: ADSP-2105BP-55-G ✗ End of LifeADSP-2105BP-55-G Overview
A digital signal processor is a microprocessor architecture optimized for repeating arithmetic operations on sampled or streamed data. The ADSP-2100 family combines an enhanced Harvard architecture with dual data buses and an independent instruction bus. This hierarchy places the device between general-purpose microprocessors and application-specific digital processing engines while retaining program memory, data memory, and peripheral integration on one chip.
The principal documented characteristics are a 16-bit data bus, 25 MHz maximum clock, 5 V supply, and an operating temperature range of -40 C to +85 C. The 68-pin LCC package supports dense industrial and embedded control layouts. Compared with a general-purpose CPU, the common DSP core provides a more suitable execution pipeline for filtering, modulation, waveform generation, and high-throughput fixed-point arithmetic.
The ADSP-2105 architecture includes on-chip program and data memory, multiple computational units, data address generators, and a program sequencer. Its three-bus organization separates instruction transfer from the two data paths, helping sustain parallel numeric operations. Developers can use this structure for real-time control loops and signal-chain tasks where predictable throughput is more important than general-purpose software flexibility.
Typical applications include industrial motor and process control, communications modulation, digital audio filtering, instrumentation, and embedded signal processing. In each case, the 25 MHz DSP core handles repeating multiply-accumulate operations while the external 68-pin package exposes the processor interface and supporting signals required by a larger control or communication system.
PCB implementation should preserve the manufacturer's pin and signal recommendations, provide stable supply decoupling near the device, and route clock and data signals away from noisy switching nodes. Because this is a legacy processor in a leaded LCC package, assembly processes must provide adequate pin wetting, heat flow through the board, and inspection coverage for all 68 leads.
This page combines the documented 16-bit, 25 MHz, 5 V, 68-pin characteristics with practical architecture guidance, sourcing questions, and drop-in options for legacy ADSP-2105 designs. For complete pin assignment, timing limits, memory organization, and electrical characteristics, consult the Analog Devices ADSP-2105 manufacturer datasheet before schematic release or PCB layout.
Drop-in alternatives for ADSP-2105BP-55-G — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with ADSP-2105BP-55-G (same form factor and footprint) — differing in Architecture, Arithmetic Format, Mounting Type, Package Type, Product Type.
ADSP-2105BP-55
✅ Drop-InContact for price
View Datasheet →ADSP-2105KP-55
✅ Drop-In📋 Reference alternative (not in catalog)
ADSP-2105BP-55-G Specifications
| Product Type | 16-bit fixed-point DSP microprocessor |
| Data Bus Width | 16 bit |
| Maximum Clock Speed | 25 MHz |
| Supply Voltage | 5 V |
| Processor Family | ADSP-2100 family |
| Architecture | Enhanced Harvard architecture with three-bus performance |
| Instruction Bus | 1 instruction bus |
| Data Buses | 2 dual data buses |
| Package Type | Plastic LCC-68 |
| Pin Count | 68 pins |
| Operating Temperature Range | -40 C to +85 C |
| Internal Register Width | 16 bit |
| Arithmetic Format | Fixed-point |
| Mounting Type | Through-hole surface-mount leaded package |
| RoHS Status | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
ADSP-2105BP-55-G plastic lcc-68 Pin Configuration Guide
Pin configuration for ADSP-2105BP-55-G (plastic lcc-68 package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.
No detailed pinout data available for ADSP-2105BP-55-G.
Refer to the datasheet for full pin configuration.
Typical Applications
ADSP-2105BP-55-G is suitable for 6 applications: Industrial Process Control, Digital Audio Filtering, Communications Modulation, Motor and Motion Control, Test and Measurement Instrumentation, Legacy Embedded Control.
Industrial Process Control
The ADSP-2105BP-55-G is appropriate for deterministic industrial process-control loops that use fixed-point filtering, signal conditioning, and feedback calculations. Its 25 MHz clock and 16-bit arithmetic architecture suit repetitive numeric workloads, while the 5 V supply simplifies integration with legacy industrial logic. Place the 68-pin LCC device where the processor can access external memory without long, high-speed signal runs. Use short ground returns and local supply decoupling to prevent switching-control energy from disturbing sensitive measurements. The processor also operates across the documented -40 C to +85 C range, making it suitable for many temperature-controlled industrial enclosures.
Recommended
Digital Audio Filtering
The ADSP-2105BP-55-G can implement fixed-point audio filters, equalization, mixing, and signal conditioning in legacy audio equipment. Its 16-bit datapath and 25 MHz processing clock provide dedicated DSP throughput for multiply-accumulate operations without relying on a general-purpose CPU. Use the device within a carefully partitioned digital and analog system so audio converters and clock sources receive clean references. External memory access and timing margins must follow the ADSP-2105 design guidance, while supply and return paths should prevent processor activity from modulating converter performance. The leaded 68-pin package also simplifies inspection in long-running consumer or broadcast equipment.
Recommended
Communications Modulation
The ADSP-2105BP-55-G fits legacy communications equipment requiring repeated fixed-point modulation, demodulation, filtering, or symbol-processing calculations. The dedicated 25 MHz DSP core and dual data buses support parallel data movement while the independent instruction path keeps control code separate from signal data. System designers should account for external memory access timing and ensure clock, data, and address routing minimizes propagation delay. A controlled 5 V distribution network with nearby decoupling helps retain stable processor operation during bursty transmit activity. For communication equipment with long product lives, the availability of the original ADSP-2105BP-55 ordering code can simplify lifecycle continuity.
Recommended
Motor and Motion Control
The ADSP-2105BP-55-G is applicable to legacy motor-control systems where encoder processing, digital filtering, and control-loop calculations require deterministic fixed-point execution. A 25 MHz clock provides a direct basis for scheduling real-time control tasks, while the 16-bit bus matches common control-word and sampled-data interfaces. Place the DSP away from switching-node copper and route its ground connection to the quiet signal ground plane to limit conducted switching noise. External memory timing, address decoding, and interrupt latency must be validated against the manufacturer's timing tables. The documented -40 C to +85 C range supports industrial cabinets where the processor is not exposed to severe ambient temperatures.
Recommended
Test and Measurement Instrumentation
The ADSP-2105BP-55-G can support legacy instrumentation that performs real-time waveform analysis, filtering, calibration, or numeric correction. Its dedicated fixed-point architecture keeps repetitive signal calculations efficient, and the 68-pin package exposes the required external processor, memory, and interface connections in a compact leaded footprint. Designers should separate analog input conditioning from the digital processor and maintain short return paths to reduce sensitivity. Memory timing and clock-source jitter should be included in the system-level error budget because they directly affect repeatable measurement performance. For instruments still in service, preserving the documented 5 V, 25 MHz, and -40 C to +85 C operating limits is essential.
Recommended
Legacy Embedded Control
The ADSP-2105BP-55-G is suitable for embedded equipment that combines real-time numeric processing with programmable control logic. The enhanced Harvard organization separates instruction and data movement, helping software maintain predictable throughput for control and signal-processing tasks. Implement external memory only after checking the required access cycles, address map, and wait-state behavior from the ADSP-2105 manufacturer documentation. Because the LCC package uses closely spaced leads, PCB assembly should include adequate thermal relief, solder-wicking control, and post-assembly inspection. Using the original ADSP-2105BP-55 ordering code can simplify procurement documentation where an uninterrupted manufacturer identity is required for qualification or traceability.
Recommended
Recommended Products Summary
Engineering reference data for ADSP-2105BP-55-G — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | ADSP-2105BP-55 | ADSP-2105KP-55 |
|---|---|---|---|
| Manufacturer | Analog Devices | Analog Devices | Analog Devices |
| Package | 68-pin plastic LCC | 68-pin plastic LCC - same architecture | 68-pin LCC family package - verify ordering suffix |
| Processor Type | 16-bit fixed-point DSP microprocessor | 16-bit fixed-point DSP microprocessor | ADSP-2105 family DSP microprocessor |
| Data Bus Width | 16 bit | 16 bit | 16 bit |
| Clock Speed | 25 MHz | 25 MHz | 25 MHz class |
| Supply Voltage | 5 V | 5 V | 5 V |
| Architecture | Enhanced Harvard architecture with three-bus performance | ADSP-2105 common DSP core | ADSP-2105 family architecture |
Key Differentiators
- Original manufacturer ordering code (vs ADSP-2105BP-55)
- Direct ADSP-2105 family continuity (vs ADSP-2105KP-55)
- Established legacy control-processing architecture (vs General-purpose microprocessor alternatives)
Design Notes
Use the exact 68-pin footprint and pin numbering defined in the ADSP-2105 manufacturer datasheet. A generic 68-pin plastic LCC outline may differ in lead width, lead span, pad geometry, or exposed thermal features. Confirm every pin against the pin-description table, preserve the orientation mark, and verify courtyard clearance around neighboring components before releasing the Gerbers.
The documented supply voltage is 5 V. Follow the manufacturer's recommended bypass and power-distribution topology rather than substituting generic capacitor values without checking the ADSP-2105 electrical characteristics. Keep the 5 V return path compact, connect the ground pins according to the pin table, and separate processor current paths from switching-node and high-current actuator returns to reduce supply noise.
Account for external memory and bus timing at the documented 25 MHz operating class. Keep processor address, data, and control traces short where possible, avoid abrupt impedance discontinuities, and route clock signals away from switching inductors and motor-drive nodes. Series damping or controlled termination should be evaluated with the actual board geometry and load rather than applied indiscriminately.
Assess junction temperature using the actual clock activity, I/O loading, ambient temperature, and board copper rather than relying on a nominal condition. The 68-pin LCC can dissipate heat through its leads and associated board copper, so thermal-via patterns and uninterrupted ground copper improve heat spreading. Avoid placing heat-generating regulators or power converters directly beneath the processor when board height permits.
Do not treat the -G suffix as a distinct silicon feature without checking its commercial ordering context. Confirm the temperature grade, package, processor revision, and code compatibility before converting an existing ADSP-2105 design to a different ordering code. Software images, timing assumptions, and external memory interfaces must be validated as part of any same-family migration.
Compliance Information
The available product information identifies a legacy industrial DSP but does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status.