Analog Devices

ADSP-2111KS-52 - 13 MHz 16-Bit DSP | Analog Devices

MPN: ADSP-2111KS-52 ✓ Active
5 V Vdss Other, PLASTIC, LCC-68 Package 13 MHz Speed
MOQ: 1 |

ADSP-2111KS-52 Overview

Analog Devices ADSP-2111KS-52 is a fixed-point DSP microprocessor from the ADSP-2100 family, featuring a 16-bit data bus, 13 MHz maximum clock frequency, 512 RAM words, and a 5 V supply in a surface-mount plastic package. The processor uses an enhanced Harvard architecture with one instruction bus and two independent data buses, allowing instruction execution and data transfers to proceed through separate paths. Reported package descriptions include LCC-68, QFP-100, and 80-BQFP, so the physical land pattern must be confirmed against the manufacturer package drawing before PCB release.

A digital signal processor is a specialized microprocessor architecture optimized for repetitive numerical operations on sampled audio, communications, control, or instrumentation signals. In the broader semiconductor hierarchy, the ADSP-2111KS-52 belongs to the digital signal processor, microprocessor, and embedded-processing markets. Its Harvard-style organization and dedicated data paths reduce the instruction-fetch bottleneck encountered when conventional processors execute successive multiply-accumulate operations.

The ADSP-2111KS-52 provides 512 RAM words of on-chip memory and a 16-bit internal data-bus width, while one catalog description identifies a 24-bit external data-bus width. It operates from a 5 V supply and is specified for a -40°C to +85°C commercial temperature range. Another source lists a 25 MHz clock, while the same catalog group identifies the maximum clock frequency as 13 MHz; engineers should therefore use the clock definition and operating-mode conditions in the manufacturer datasheet for the selected grade.

The enhanced Harvard architecture is central to this processor’s performance. One instruction bus and two data buses permit separate instruction and data traffic, supporting the ADSP-2100 family’s three-bus processing model. On-chip RAM reduces external-memory transactions for time-critical routines, but final throughput depends on instruction mix, memory availability, wait states, and the clock configuration used by the finished system.

Typical uses for this DSP architecture include audio signal processing, communications filtering, modulation, control loops, and instrumentation. In an audio system, it can implement gain control, mixing, equalization, and sample-rate conversion. In communications equipment, its parallel fixed-point architecture supports filtering and real-time data movement. The 512 RAM words are modest, so workflows requiring larger buffers or more complex control software need external memory and careful address-space planning.

The first design step is to verify the exact package and pin assignment for ADSP-2111KS-52, because published catalog records do not agree on lead count and package nomenclature. Confirm the manufacturer pin-description table, exposed-pad requirements, thermal data, and recommended land pattern before routing. A new PCB should not be released solely from a marketplace package thumbnail or an automatically normalized catalog field.

This page consolidates the verified electrical, architectural, environmental, and sourcing details for ADSP-2111KS-52 and distinguishes confirmed characteristics from package metadata that still requires schematic-level verification. It also provides application guidance, comparison dimensions, practical design cautions, and a structured path for identifying whether an existing ADSP-2100-family design can be reused or whether a redesign is required.

Drop-in alternatives for ADSP-2111KS-52 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

No drop-in alternatives available for this product.

Request Alternatives

ADSP-2111KS-52 Specifications

Product Type Fixed-point DSP microprocessor
Processor Family ADSP-2100 family
Architecture Enhanced Harvard architecture
Data Bus Width 16-bit
External Data Bus Width 24-bit
Fixed-Point Word Length 16-bit
Maximum Clock Frequency 13 MHz
Alternate Reported Clock Speed 25 MHz
Instruction Bus 1 instruction bus
Data Buses 2 independent data buses
On-Chip RAM 512 RAM words
Supply Voltage 5 V
Operating Temperature -40°C to +85°C
Temperature Grade Commercial
Package Type Other, PLASTIC, LCC-68
Alternate Reported Package 80-BQFP
Additional Reported Package QFP-100
Mounting Type Surface mount
Terminal Form Gull wing
Package Shape Square

ADSP-2111KS-52 square Pin Configuration Guide

Pin configuration for ADSP-2111KS-52 (square package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

square package pinout diagram for ADSP-2111KS-52

No detailed pinout data available for ADSP-2111KS-52.

Refer to the datasheet for full pin configuration.

Typical Applications

ADSP-2111KS-52 is suitable for 6 applications: Audio Mixing and Equalization, Communications Filtering, Industrial Control Loop, Instrumentation Signal Conditioning, Data Acquisition Front End, Legacy Equipment Refresh.

🎧

Audio Mixing and Equalization

The ADSP-2111KS-52 is suitable for small audio-processing systems that perform mixing, filtering, gain adjustment, or equalization on fixed-point sample data. Its 16-bit data organization aligns with common 16-bit audio formats, while the one-instruction and two-data-bus Harvard architecture supports concurrent instruction execution and data transfers. At the listed 13 MHz maximum clock frequency, however, designers must budget cycle cost for each filter section and ensure that 512 RAM words accommodate the working buffers, coefficients, and stack. A practical implementation places the processor beside a codec or DAC, uses buffered serial audio I/O, and keeps real-time routines separate from noncritical processing.

🌐

Communications Filtering

The ADSP-2111KS-52 can serve as the real-time computational core in communications equipment performing filtering, interpolation, decimation, or other fixed-point signal operations. Its two independent data buses allow instruction fetches and data transfers to use separate paths, a useful feature for routines that repeatedly access coefficients and samples. The 13 MHz clock rating requires careful cycle budgeting, especially for cascaded filters or algorithms with many branches. Designers should also treat the 512 RAM words as a strict local working-memory budget. External memory may extend buffering capability, but wait states and bus arbitration must be included in throughput analysis.

🏭

Industrial Control Loop

The ADSP-2111KS-52 can implement deterministic control calculations in industrial equipment, including proportional-integral-derivative processing, sensor conditioning, actuator command generation, and digital filtering. Its fixed-point architecture can make loop timing repeatable when the software avoids dynamic-memory operations and uses a verified cycle-counted schedule. The 512 RAM words can hold filter coefficients and state variables, but a multi-axis or high-rate controller may need additional external storage. The -40°C to +85°C operating range supports many industrial environments. Design work should also separate analog sensor paths from the digital processor and validate timing at the 13 MHz maximum clock rather than relying on average workload estimates.

🔧

Instrumentation Signal Conditioning

The ADSP-2111KS-52 is applicable to measurement instruments that digitize a sensor signal and perform filtering, calibration, scaling, or compensation before producing a result. Its two independent data buses are useful for numerical kernels that alternate between coefficient access and sample processing, while the 16-bit fixed-point format supports conventional precision-oriented arithmetic. Designers should determine whether 512 RAM words are sufficient for the selected algorithm and whether a floating-point host is required for setup and calibration. A practical design validates timing with representative data, isolates the DSP supply with local decoupling, and confirms the package land pattern against the manufacturer drawing before fabrication.

📊

Data Acquisition Front End

The ADSP-2111KS-52 can support data-acquisition front ends that require local filtering or format conversion between a converter and a host or communications interface. The processor’s fixed-point arithmetic and Harvard-style bus structure allow sampling routines to remain separate from slower control and transfer code. Its 13 MHz maximum clock frequency is suitable for many moderate-bandwidth signal chains, but sustained throughput depends on sample width, channel count, memory speed, and interrupt overhead. Use 512 RAM words for time-critical sample buffers where possible, then transfer completed blocks through a slower interface. This division prevents external-memory latency from disrupting deterministic acquisition timing.

🖥️

Legacy Equipment Refresh

ADSP-2111KS-52 is most appropriate in a legacy-equipment refresh when the objective is to reproduce an existing ADSP-2100-family signal-processing function while retaining proven algorithms and board architecture. Its 512 RAM words, 16-bit data organization, and 13 MHz maximum clock rating can reproduce suitable designs without introducing a new software ecosystem. Before ordering, confirm that the required package, lead count, pin numbering, clock source, and memory interface match the installed processor. A refresh design should also review the age of the surrounding power supply, external memory, and clock circuitry, since replacing only the DSP may not resolve failures caused by aged support components.

What is the ADSP-2111KS-52?
The ADSP-2111KS-52 is an Analog Devices fixed-point digital signal processor in the ADSP-2100 family. It uses an enhanced Harvard architecture with one instruction bus, two independent data buses, a 16-bit data bus, 512 RAM words, a 13 MHz maximum clock frequency, and a 5 V supply. The product is intended for real-time audio, communications, control, and instrumentation signal-processing systems.
What is the operating voltage of ADSP-2111KS-52?
The ADSP-2111KS-52 operates from a 5 V supply. This value applies to the processor’s power rail and should be coordinated with the voltage tolerances, decoupling requirements, and I/O levels of connected memory and interface components. The device also requires the correct sequencing relationships between its supply, clock, reset, and control signals; use the manufacturer datasheet pin table and recommended application circuit when designing the power network.
What is the maximum clock frequency of ADSP-2111KS-52?
The maximum clock frequency listed for ADSP-2111KS-52 is 13 MHz. A separate product record also describes a 25 MHz clock speed, but the 13 MHz figure is the value identified specifically as the maximum clock frequency for this MPN. Use the clock limits, divider arrangements, and operating conditions in the ADSP-2100 family documentation when configuring the processor and validating timing.
What memory is built into ADSP-2111KS-52?
The ADSP-2111KS-52 contains 512 RAM words of on-chip memory. This internal storage supports time-critical data, coefficients, stack activity, and frequently executed routines without requiring every access to occur through an external memory interface. The available system memory may depend on the complete processor configuration, so software designers should reserve stack and application memory carefully when targeting the ADSP-2100 family.
Which package does ADSP-2111KS-52 use?
Catalog records identify several package descriptions for ADSP-2111KS-52, including plastic LCC-68, 80-BQFP, and QFP-100. Because those records conflict, the exact mechanical package must be confirmed from the manufacturer drawing before a PCB footprint is released. Do not infer lead count from the MPN suffix alone; verify pin names, numbering, body dimensions, lead pitch, and exposed-pad requirements.
Where can I download the ADSP-2111KS-52 datasheet PDF?
The ADSP-2111KS-52 datasheet is available through the Analog Devices document link reproduced on the ADSP-2111KS-52 datasheet page. The document identifies the part as an ADSP-2100 family DSP microcomputer and provides the processor architecture, electrical characteristics, pin descriptions, and package information needed for design work. Use the manufacturer’s pin-description table for every PCB assignment because catalog package fields conflict for this legacy device.
Where is the ADSP-2111KS-52 pinout located?
The ADSP-2111KS-52 pinout is located in the pin-description table of the Analog Devices ADSP-2100 family datasheet. The pin table should be matched to the confirmed mechanical package before assigning tracks or defining a footprint. A public package diagram cannot be assigned reliably from the catalog metadata alone because records variously identify LCC-68, 80-BQFP, and QFP-100 configurations.
What can replace ADSP-2111KS-52?
No verified drop-in replacement for ADSP-2111KS-52 is identified. A replacement must match the exact package and pinout, support 5 V operation, provide compatible data-bus and memory interfaces, and maintain acceptable timing and software compatibility. Same-family speed or temperature grades are not automatically interchangeable, so each candidate should be checked against the ADSP-2100 family pin table before being treated as a direct replacement.
What is the best drop-in replacement for ADSP-2111KS-52?
The best drop-in replacement cannot be selected without a verified pin-compatible ADSP-2100-family part in the same mechanical package. The essential checks are lead count, pin numbering, 5 V supply compatibility, clock requirements, memory configuration, and signal functions. Because published records disagree on the target package and no candidate is documented as pin-to-pin compatible, substituting an XFP- or LQFP-based processor without a verified package cross-reference would be risky.
Is ADSP-2111KS-52 suitable for audio processing?
The ADSP-2111KS-52 is suitable for audio processing when the application fits its 13 MHz maximum clock and 512 RAM words. Its two independent data buses support parallel numerical processing, making the architecture relevant to mixing, filtering, gain control, and equalization. Buffer-intensive playback, high-order filtering, or multichannel codec processing may require external memory and careful system-level verification.
Is ADSP-2111KS-52 suitable for communications equipment?
The ADSP-2111KS-52 can support communications signal-processing functions such as filtering, modulation-related computation, and real-time data movement. Its fixed-point 16-bit data organization and dual data buses are useful for predictable digital processing, while 512 RAM words limit the complexity of local buffers. Communications designs should verify throughput at the maximum clock, external-memory timing, and the required data format.
ADSP-2111KS-52 versus a modern DSP: which is better for a new design?
The ADSP-2111KS-52 is better when maintaining an existing ADSP-2100-family design, reusing proven software, and avoiding board changes is more important than using current processing resources. A modern DSP is generally preferable for new designs requiring greater memory, faster throughput, integrated peripherals, or current software support. The final choice also depends on the verified package because lead-count records for ADSP-2111KS-52 are inconsistent.
When should I choose ADSP-2111KS-52 over another ADSP-2100-family processor?
Choose ADSP-2111KS-52 when an existing design specifically targets its 13 MHz clock rating, 16-bit data organization, 512 RAM words, and verified electrical configuration. Choosing another family member may be appropriate when higher clock speed, more memory, additional peripherals, or a different package is required. The correct family-level comparison must use the manufacturer’s processor selector and package drawings rather than marketplace product fields.
Where can I buy ADSP-2111KS-52 and check current availability?
Use the Request a Quote form on this page to request the current ADSP-2111KS-52 quotation, stock position, minimum order quantity, and production lead time. Because availability can change rapidly for legacy processors, request the exact MPN and confirmed package configuration. A current authorized-channel quotation should also confirm whether the available material is original manufacturer stock, an authorized aftermarket solution, or another sourcing arrangement.
What is the price and lead time of ADSP-2111KS-52?
Request the current ADSP-2111KS-52 price and production lead time through the Request a Quote form on this page. The device is an older DSP in the ADSP-2100 family, so lead time and allocation may depend on remaining inventory, package confirmation, and product lifecycle planning. Include the target quantity, approved supplier requirement, and expected assembly cadence when requesting the quotation.
Is ADSP-2111KS-52 in stock?
Stock for ADSP-2111KS-52 should be confirmed through the Request a Quote form on this page at the time of your order. One catalog record describes the component as currently in active production, while another marketplace listing references a special manufacturer-part number. The quotation process should confirm exact MPN identity, package, date code, traceability, and the quantity available for allocation.
What are the key specifications engineers should know about ADSP-2111KS-52?
The key specifications are a 5 V supply, 13 MHz maximum clock frequency, 16-bit data bus, 512 RAM words, one instruction bus, two independent data buses, and a -40°C to +85°C operating range. The enhanced Harvard architecture supports parallel data movement for real-time numerical work. Physical implementation requires special care because catalog sources disagree among LCC-68, 80-BQFP, and QFP-100 package descriptions.
Is there an Analog Devices equivalent for ADSP-2111KS-52?
No verified Analog Devices equivalent is documented as a drop-in substitute for ADSP-2111KS-52. A same-family part is only a replacement when its complete ordering code confirms the same package, pinout, electrical limits, clock range, and memory organization. Request manufacturer application or FAE assistance if legacy software and PCB compatibility make a transition difficult, and do not assume that a similar clock rating establishes interchangeability.

Engineering reference data for ADSP-2111KS-52 — comparison, design guidance, and compliance information.

Selection Guide

Choose the ADSP-2111KS-52 when maintaining an ADSP-2100-family product, reproducing proven fixed-point signal-processing software, or replacing an installed processor in a legacy design. Its 13 MHz maximum clock frequency, 16-bit data organization, two independent data buses, and 512 RAM words are most appropriate for moderate-bandwidth audio, filtering, communications, and control tasks. Avoid it for new designs requiring large buffers, high channel counts, extensive connectivity, or substantially greater arithmetic throughput. Do not select a replacement based only on the ADSP-2100 family name: verify the exact package, pinout, memory interface, clock requirements, and supply compatibility. Because published records conflict on whether this MPN uses LCC-68, 80-BQFP, or QFP-100, confirm the manufacturer drawing before committing to a PCB footprint or alternative component.

Comparison with Alternatives

Parameter This Product
Brand Analog Devices
Package Conflicting records: plastic LCC-68, 80-BQFP, or QFP-100
Product Type Fixed-point DSP microprocessor
Processor Family ADSP-2100 family
Architecture Enhanced Harvard architecture
Data Bus Width 16-bit
External Data Bus Width 24-bit
Maximum Clock Frequency 13 MHz
On-Chip RAM 512 RAM words
Supply Voltage 5 V
Operating Temperature -40°C to +85°C
Mounting Type Surface mount

Key Differentiators

  • Dedicated parallel data paths for real-time signal processing (vs A general-purpose microcontroller)
  • Integrated local RAM for time-critical code and data (vs A processor without on-chip RAM)
  • Legacy ADSP-2100-family software continuity (vs A modern redesign platform)
  • Commercial-temperature operation (vs An extended-temperature grade)

Design Notes

Do not release a footprint until the mechanical package is resolved. Public product records identify plastic LCC-68, 80-BQFP, and QFP-100 configurations for ADSP-2111KS-52. Cross-check the manufacturer package drawing for body size, lead pitch, pin-1 orientation, exposed-pad requirements, and land-pattern tolerances. Treat any PCB library footprint built from marketplace metadata as provisional because a wrong lead count can place every processor signal on the wrong pad.

Build the 5 V supply network around the processor’s recommended decoupling and pin requirements. Place the highest-frequency ceramic capacitor close to the relevant supply and ground pins, preserve the recommended return path, and keep switching-regulator and high-current digital return currents away from sensitive signal routing. Validate supply tolerance, startup sequencing, reset behavior, and clock stability in the assembled system rather than relying only on steady-state simulation.

Resolve the 13 MHz versus 25 MHz clock records before establishing the timing budget. The 13 MHz value is identified as the maximum clock frequency for this MPN, while another catalog description lists 25 MHz. Use the ADSP-2100 family clock specifications and operating conditions to determine the permitted input, divider settings, and performance mode. Do not build a product around the higher value without explicit confirmation from the manufacturer documentation.

Separate real-time processor buses from external-memory and peripheral interfaces when practical. Route the instruction bus, two data buses, address lines, and associated control signals according to the manufacturer’s recommended layout, and avoid adding test pads or long stubs on sensitive timing paths. Because the processor uses separate instruction and data paths, route-length and return-path differences can affect timing margin; simulate the complete memory system with realistic loading and wait states.

Evaluate thermal performance at the maximum expected processing duty cycle rather than at idle. The catalog material does not provide a verified thermal-resistance figure for the exact package, so use the confirmed manufacturer package drawing for junction-temperature calculations. Account for the local 5 V dissipation, ambient range, PCB copper, enclosure conditions, and neighboring heat sources. If the package cannot be confirmed, do not assign a thermal rating or heatsink calculation from an assumed lead-count package.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact legacy MPN. The listed -40°C to +85°C range describes commercial-temperature operation rather than AEC-Q100 qualification.

Data verified on: 2026-11-10 — data verified and curated by XAIPART's component engineering team

Related Searches

ADSP-2111KS-52 datasheet ADSP-2111KS-52 specifications ADSP-2111KS-52 pinout ADSP-2111KS-52 datasheet pdf ADSP-2111KS-52 equivalent ADSP-2111KS-52 replacement ADSP-2111KS-52 cross reference ADSP-2111KS-52 package ADSP-2111KS-52 footprint Analog Devices ADSP-2111KS-52 ADSP-2111KS-52 price ADSP-2111KS-52 stock ADSP-2111KS-52 13 MHz DSP ADSP-2111KS-52 512 RAM ADSP-2111KS-52 audio processing

Related Components & Terms

Analog Devices ADSP-2111KS-52 ADSP-2100 family digital signal processor DSP microprocessor embedded signal processing fixed-point processor enhanced Harvard architecture instruction bus independent data buses 16-bit data bus 24-bit external data bus 512 RAM words 13 MHz clock 5 V power supply ADSP-2100 DSP microcomputer surface-mount plastic package LCC-68 80-BQFP QFP-100 audio signal processing communications filtering digital control loop instrumentation signal conditioning
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details