Analog Devices

ADSP-2182BST-115 - 16-Bit DSP Microcomputer | Analog Devices

MPN: ADSP-2182BST-115 ✗ End of Life
MOQ: 1 |

ADSP-2182BST-115 Overview

Analog Devices ADSP-2182BST-115 is a 16-bit digital signal processor microcomputer from the ADSP-218x family, supplied in an package. The device is intended for embedded signal-processing applications requiring dedicated arithmetic, filtering, control, and real-time data handling. Its exact clock rate, memory configuration, voltage range, and operating-temperature limits must be confirmed from the manufacturer datasheet before final circuit design.

A digital signal processor, or DSP, is a specialized microprocessor architecture optimized for numerical operations on continuously sampled signals. Within the semiconductor hierarchy, the ADSP-2182BST-115 belongs to the DSP, microprocessor, embedded-processing, and real-time-control categories. Unlike a general-purpose CPU, a DSP emphasizes predictable arithmetic execution, efficient filter implementation, and high throughput for audio, communications, control, and instrumentation workloads.

The manufacturer classifies the ADSP-2182BST-115 as a 16-bit digital signal processor. Its architecture and exact family-level functions should be established using the Analog Devices ADSP-218x documentation. Key engineering checks include the processor instruction set, internal memory resources, serial-port configuration, clock requirements, peripheral interfaces, and the voltage tolerances required by the target system. These details determine whether an existing ADSP-2100 or ADSP-218x design can be reused without schematic or firmware changes.

Analog Devices states that the ADSP-2184 is the lowest-cost pin-compatible member of the ADSP-218x family and that previous ADSP-2100 code is code-compatible with it. This family relationship provides useful migration context for legacy embedded designs. However, device selection still requires checking memory size, clock speed, serial-interface population, temperature grade, and package dimensions rather than relying on family membership alone.

Typical uses include digital audio filtering, industrial process-control loops, communications-channel processing, motor-control signal generation, and instrumentation. In each case, the processor's 16-bit architecture can support real-time algorithms when the arithmetic workload, sample rate, memory requirement, and I/O bandwidth are balanced correctly. Software tasks should be partitioned to preserve deterministic execution and minimize interrupt latency.

PCB design should begin with the exact package drawing and pin-description table in the manufacturer datasheet. Confirm power, ground, decoupling, clock, reset, and programming-interface connections before layout. Because this page does not reproduce the package drawing, do not infer pin orientation, exposed-pad requirements, or land patterns from the BST suffix alone.

This page organizes the confirmed device identity, sourcing information, family compatibility context, and engineering selection criteria. It also distinguishes directly documented ADSP-218x migration options from parameters that require datasheet confirmation, helping engineers plan a safe replacement review without assuming that a family label alone guarantees electrical or software equivalence.

Drop-in alternatives for ADSP-2182BST-115 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

ADSP-2182BSTZ-115

✅ Drop-In ⚠️ Specs Unverified
📦 ADSP-2182 BST family package
Same ADSP-2182 processor family and 115 temperature designation; 0 documented pin changes, with exact finish or ordering differences not stated

📋 Reference alternative (not in catalog)

ADSP-2181BST-115

✅ Drop-In
📦 ADSP-218x BST family package
Same ADSP-218x family and 115 temperature designation; 0 documented pin changes, while the exact clock and memory delta is

📋 Reference alternative (not in catalog)

ADSP-2181KS-115

✅ Drop-In
Analog Devices
📦 ADSP-218x BST family package
16-bit fixed-point digital signal processor and microcomputer · ADSP-2100 family architecture · 24-bit · 16-bit · 40 MIPS · 25 ns · 20 MHz crystal · 80 KB total

Contact for price

View Datasheet →

ADSP-2184

✅ Drop-In
📦 ADSP-218x family package
Manufacturer documents 0 pin changes and ADSP-2100 source-code compatibility; exact resource and speed differences are

📋 Reference alternative (not in catalog)

ADSP-2185NBSTZ-320

✅ Drop-In
📦 ADSP-218x NBST family package
Same ADSP-218x family with 0 documented pin changes in the comparison listing; clock, memory, temperature, and ordering deltas are

📋 Reference alternative (not in catalog)

ADSP-2182BST-115 Specifications

Manufacturer Analog Devices
Product Type DSP MicroComputer / 16-bit digital signal processor
Processor Word Length 16 bit
Series ADSP-218x family
Generic Part Number ADSP-2182
Lifecycle Status Obsolete

ADSP-2182BST-115 standard Pin Configuration Guide

Pin configuration for ADSP-2182BST-115 (standard package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

standard package pinout diagram for ADSP-2182BST-115

No detailed pinout data available for ADSP-2182BST-115.

Refer to the datasheet for full pin configuration.

Typical Applications

ADSP-2182BST-115 is suitable for 6 applications: Digital Audio Filtering, Industrial Process Control, Communications Channel Processing, Motor and Motion Control, Test and Measurement Instrumentation, Legacy Embedded System Maintenance.

🎧

Digital Audio Filtering

The ADSP-2182BST-115 can serve as the processing core in a digital audio filter or communications decoder because it is a dedicated 16-bit DSP rather than a general-purpose controller. Sample conversion, finite impulse response filtering, equalization, and dynamic-range processing can be scheduled as deterministic arithmetic tasks. The implementation must confirm the device's clock rate, memory map, serial-interface resources, and supported audio sample rates. Peripheral converters should be synchronized through the available clock and data interfaces, while firmware should avoid unbounded loops that could delay the sample-processing deadline. Existing ADSP-2100-derived code may provide a useful starting point because Analog Devices documents ADSP-218x source-code compatibility, but hardware timing and memory allocation still require validation.

🏭

Industrial Process Control

ADSP-2182BST-115 is applicable to a real-time process-control loop where sampled measurements must be filtered and acted upon with predictable timing. A practical signal chain would condition a transducer, perform analog-to-digital conversion, calculate a digital filter or compensator, and drive a control output through a converter. The processor's DSP architecture is useful for arithmetic-intensive compensators, but the design must verify sampling rate, serial-port resources, supply voltage, temperature range, and interrupt latency. Firmware should use a fixed scheduling model so each control cycle completes before the next sample arrives. For a new controller, compare the ADSP-2184 migration candidate against the obsolete target and verify all peripheral assignments before changing the production BOM.

🌐

Communications Channel Processing

The ADSP-2182BST-115 can be evaluated for communications-channel tasks such as filtering, modulation, demodulation, or echo cancellation when the required arithmetic rate fits the processor's confirmed clock and memory resources. In this architecture, serialized input samples enter the DSP, intermediate results remain in on-chip or external memory, and processed data returns through one or more serial channels. Burst-transfer sizing, buffer alignment, and the serial-port baud-rate capability are critical because an incorrect assumption can create data loss even when the arithmetic itself is valid. Firmware should use double-buffer or ping-pong handling when latency permits. A same-family device may reduce migration effort, but its clock, memory, and peripheral population must match the original design before it can be approved.

🔧

Motor and Motion Control

ADSP-2182BST-115 is suited to evaluating a motor-control signal path that performs current sampling, digital filtering, and compensation before generating a control command. Its dedicated DSP architecture can execute fixed-point control algorithms efficiently, while the ADSP-218x family relationship supports reuse of legacy ADSP-2100 control code. The key design checks are control-loop latency, PWM timing resources, serial sampling interfaces, arithmetic word length, and memory availability. Firmware should isolate the real-time loop from nonessential background work and use consistent scaling to prevent overflow in the 16-bit arithmetic path. An exact replacement must reproduce the pinout and all used peripherals; the ADSP-2184 is a documented family migration candidate, subject to detailed resource verification.

🔧

Test and Measurement Instrumentation

ADSP-2182BST-115 can be evaluated for instrumentation that performs waveform filtering, calibration, frequency analysis, or real-time measurement. A typical design connects an external converter to the DSP serial interface, stores samples in memory, applies a deterministic processing algorithm, and transfers results to a host or display controller. Memory depth and sustained sample throughput must be checked because long capture records can require external memory and a carefully timed buffer scheme. The processor's 16-bit architecture should also be evaluated against the required numerical accuracy, with scaling and rounding implemented explicitly in firmware. The exact clock, supply rails, and temperature grade must be confirmed because these specifications determine whether the original device is appropriate for calibrated laboratory or field equipment.

🖥️

Legacy Embedded System Maintenance

ADSP-2182BST-115 remains relevant for maintaining equipment in which its exact processor, memory organization, and peripheral assignments are already embedded in the PCB and firmware. The maintenance strategy should preserve the original order code whenever possible because package geometry, clock circuitry, programming interfaces, and software assumptions must remain unchanged. For redesigns, a same-family processor can reduce software conversion effort, especially where ADSP-2100 source compatibility applies. Create a pin-by-pin comparison and a resource map covering timers, serial ports, memory, interrupts, and external buses before approving an alternative. Because the target is obsolete, obtain lifecycle confirmation, traceability details, and a lot-specific supply commitment through the Request a Quote form on this page.

Recommended Products Summary

ADSP-2184 Pin-compatible ADSP-218x migration candidate Used in: Digital Audio Filtering, Industrial Process Control, Communications Channel Processing, Motor and Motion Control, Test and Measurement Instrumentation, Legacy Embedded System Maintenance ADSP-2181BST-115 Same-family 16-bit DSP candidate Used in: Digital Audio Filtering, Communications Channel Processing, Legacy Embedded System Maintenance ADSP-2185NBSTZ-320 ADSP-218x control-processing candidate Used in: Industrial Process Control ADSP-2182BSTZ-115 Closest same-family processor variant Used in: Motor and Motion Control, Legacy Embedded System Maintenance ADSP-2181KS-115 Analog Devices Used in: Test and Measurement Instrumentation
What is the ADSP-2182BST-115?
The ADSP-2182BST-115 is a 16-bit digital signal processor microcomputer from Analog Devices. It is a member of the ADSP-218x family and is categorized as an embedded DSP processor. The manufacturer documentation identifies this family with legacy ADSP-2100 software compatibility, while exact clock, memory, voltage, and package details should be confirmed from the device datasheet before schematic release.
What are the key specifications of ADSP-2182BST-115 that engineers should know?
The confirmed headline specifications are a 16-bit processor width, DSP MicroComputer architecture, and ADSP-2182 generic part number. The lifecycle status is obsolete, and the exact package, clock rate, memory configuration, operating voltages, and temperature limits are not established by the manufacturer material available for this listing. Confirm those parameters and the complete pin description in the Analog Devices datasheet before qualifying a new PCB or firmware release.
Where can I download the ADSP-2182BST-115 datasheet PDF?
The ADSP-2182BST-115 datasheet PDF is available through the ADSP-2182BST-115 document link on this page. Use the pin-description table, electrical-characteristics section, package drawing, and application information when assigning tracks and selecting supporting components. Do not infer pin orientation or exposed-pad connections from the order code alone, because the exact package drawing must match the fitted device.
Where can I find the ADSP-2182BST-115 pinout?
Use the pin-description table and package drawing in the ADSP-2182BST-115 datasheet to find the authoritative pinout. The available listing identifies the part as a DSP MicroComputer but does not state the exact package pin count or individual signal assignments. Confirm power, ground, reset, clock, serial-interface, and programming pins before routing the PCB or assembling replacement hardware.
Is ADSP-2182BST-115 currently in stock?
Stock status changes by seller and inventory location, so use the Request a Quote form on this page for the current availability of ADSP-2182BST-115. The product is marked obsolete by a manufacturer-specific listing, which means new supply may be limited. For production continuity, request a written lifecycle response and documented traceability rather than relying on a temporary stock count.
What is the price of ADSP-2182BST-115?
Submit the ADSP-2182BST-115 part number through the Request a Quote form on this page for current pricing, minimum order quantity, and stock allocation. Obsolete processors can have pricing that changes materially with lot size, traceability requirements, and remaining inventory. The structured page displays current commercial terms without embedding a potentially stale unit-price figure into the engineering content.
What is the lead time for ADSP-2182BST-115?
The current lead time for ADSP-2182BST-115 must be confirmed through the Request a Quote form on this page. Because the processor is listed as obsolete, lead time can depend on remaining factory inventory, authorized-channel availability, date-code requirements, and whether the assembly requires a last-time-buy allocation. Request a lot-specific delivery commitment before committing a production schedule.
Where to buy ADSP-2182BST-115 online?
Use the Request a Quote form on this page to request ADSP-2182BST-115 pricing, availability, and lead time. For an obsolete DSP, also specify the required package suffix, temperature range, quantity, date code, and traceability level. These details allow the order to be matched to the correct original ADSP-2182 device rather than a superficially similar member of the broader signal-processing portfolio.
What is the best drop-in replacement for ADSP-2182BST-115?
The strongest documented migration path is a pin-compatible ADSP-218x-family device, but no single replacement can be called a universal drop-in without checking memory, clock, peripherals, temperature, and package dimensions. Analog Devices specifically identifies the ADSP-2184 as pin compatible and code-compatible with previous ADSP-2100 code. Treat it as a migration candidate and verify the electrical and software requirements before substitution.
Can ADSP-2184 replace ADSP-2182BST-115?
ADSP-2184 is a documented ADSP-218x-family migration candidate because Analog Devices describes it as pin compatible and code-compatible with previous ADSP-2100 code. However, a safe replacement decision must still confirm package geometry, memory size, clock speed, serial ports, supply voltage, temperature grade, and every peripheral used by the target firmware. Pin compatibility alone does not establish complete functional equivalence.
What can replace ADSP-2182BST-115?
ADSP-2181, ADSP-2184, and ADSP-2185-family devices are the relevant candidates to review because they belong to the same ADSP-218x architecture family. The ADSP-2184 has explicit manufacturer documentation supporting pin and source-code compatibility. For every other candidate, verify the exact suffix, package, memory map, peripheral set, clock rate, and electrical limits before treating it as a drop-in replacement.
Is ADSP-2182BST-115 the same as ADSP-2184?
No, they are different ADSP-218x-family members and should not be assumed identical. Analog Devices states that ADSP-2184 is pin compatible with family designs and compatible with prior ADSP-2100 code, but differences in cost, resources, and performance may still exist. Compare the datasheets for clock rate, memory, serial interfaces, supply voltage, package, and temperature coverage before replacing ADSP-2182BST-115.
When should I choose ADSP-2182BST-115 over ADSP-2184?
Choose ADSP-2182BST-115 only when an existing design specifically requires that exact processor and its verified resource configuration. For a new design, ADSP-2184 may be more attractive when its documented family compatibility supports the required software and the remaining electrical and peripheral differences are acceptable. For production after obsolescence, exact-device replication is usually preferable to an unqualified functional substitution.
Is ADSP-2182BST-115 suitable for industrial control applications?
ADSP-2182BST-115 is architecturally suitable for real-time control because it is a dedicated 16-bit digital signal processor. Suitability for a specific industrial control design also depends on operating-temperature grade, clock rate, memory, serial-interface availability, supply voltage, and long-term lifecycle support. These specifications must be checked against the control loop latency and environmental requirements before design approval.
What compliance documents are available for ADSP-2182BST-115?
The available technical listing does not state a definitive RoHS, REACH, lead-free, halogen-free, or AEC-Q100 status for ADSP-2182BST-115. Request the relevant manufacturer declaration or product-documentation package through the Request a Quote form, including the exact order code and intended application. Do not infer current compliance from the ADSP-218x family name or from a distributor category label.

Engineering reference data for ADSP-2182BST-115 — comparison, design guidance, and compliance information.

Selection Guide

Choose ADSP-2182BST-115 when maintaining an existing assembly that specifically requires its exact memory organization, peripheral arrangement, electrical characteristics, and software behavior. For a new ADSP-218x design, evaluate ADSP-2184 because Analog Devices describes it as the family's lowest-cost pin-compatible device and states that it supports previous ADSP-2100 code; nevertheless, verify clock, memory, peripherals, supply voltage, temperature, and package dimensions before committing. ADSP-2181BST-115 and ADSP-2181KS-115 may fit legacy maintenance programs, but their exact suffix-level differences need review. ADSP-2185NBSTZ-320 is a broader family candidate whose speed, temperature, and ordering details must be reconciled with the original design. For obsolete inventory, prioritize an exact-ordering match, documented traceability, and lot-specific availability rather than assuming that family-level pin compatibility covers every requirement.

Comparison with Alternatives

Parameter This Product ADSP-2182BSTZ-115 ADSP-2181BST-115 ADSP-2181KS-115 ADSP-2184 ADSP-2185NBSTZ-320
Manufacturer Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Processor Type 16-bit DSP MicroComputer DSP MicroComputer DSP MicroComputer DSP MicroComputer ADSP-218x DSP ADSP-218x DSP
Product Family ADSP-218x ADSP-218x ADSP-218x ADSP-218x ADSP-218x ADSP-218x
Pin Compatibility Reference design 0 documented pin changes 0 documented pin changes in family context 0 documented pin changes in family context Pin compatible, as stated by Analog Devices 0 documented pin changes in comparison context

Key Differentiators

  • Exact ADSP-2182 family identity (vs ADSP-2184)
  • Manufacturer-documented source compatibility for migration (vs ADSP-2184)
  • Legacy-system continuity (vs ADSP-2185NBSTZ-320)

Design Notes

Do not start the layout from the order code alone. Download the package drawing associated with the exact ADSP-2182 suffix, verify the pin count and exposed-pad requirement, and then assign power, ground, clock, reset, serial-interface, and programming signals. Place decoupling capacitors at the supply pins using the values and placement guidance in the manufacturer datasheet. A mechanically similar family member should not be routed until every land pattern and thermal feature has been checked.

Treat ADSP-2184 as a migration candidate rather than an automatic substitute. Analog Devices documents pin compatibility and compatibility with prior ADSP-2100 code, but a production decision must also compare clock rate, memory, serial ports, timers, interrupt vectors, supply voltage, temperature grade, and bootloader behavior. Run the existing firmware against both devices and verify timing at the worst-case workload before releasing the alternative into production.

Keep processor clock and serial-interface traces short, route them over a continuous reference plane, and isolate high-current switching paths from sensitive signal lines. Confirm the external clock amplitude, rise time, and routing guidance in the manufacturer electrical specifications. If the design supports multiple ADSP-218x devices, review bus timing, termination, and the maximum operating frequency for each candidate rather than assuming identical behavior across the family.

Avoid changing the processor, clock source, and peripheral layout in one uncontrolled revision. First reproduce the obsolete device's behavior with the original schematic and firmware, then substitute only one variable at a time. Record boot sequence, interrupt latency, serial framing, memory initialization, and calibration data during this process. This makes it possible to distinguish a hardware incompatibility from a firmware or configuration error.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

No definitive compliance declarations were stated for the exact ADSP-2182BST-115 order code. Obtain the applicable manufacturer declarations for the exact suffix and intended application before production release.

Data verified on: 2026-11-15 — data verified and curated by XAIPART's component engineering team

Related Searches

ADSP-2182BST-115 datasheet ADSP-2182BST-115 pinout ADSP-2182BST-115 datasheet pdf ADSP-2182BST-115 equivalent ADSP-2182BST-115 replacement ADSP-2182BST-115 cross reference ADSP-2182BST-115 vs ADSP-2184 ADSP-2182BST-115 price ADSP-2182BST-115 stock Analog Devices ADSP-2182BST-115 ADSP-2182 16-bit DSP ADSP-2182BST-115 footprint

Related Components & Terms

Analog Devices ADSP-2182BST-115 ADSP-2182 ADSP-2181BST-115 ADSP-2181KS-115 ADSP-2184 ADSP-2185NBSTZ-320 ADSP-218x ADSP-2100 DSP digital signal processor DSP MicroComputer 16-bit microprocessor embedded signal processing real-time control digital audio filtering communications channel processing industrial process control motor control instrumentation pin compatibility source-code compatibility RoHS REACH AEC-Q100
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details