ADUM1400ARWZ-RL7 - Quad Digital Isolator 1Mbps | Analog Devices
MPN: ADUM1400ARWZ-RL7 ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $3.5 | $3.50 |
| 10 | $3.15 | $31.50 |
| 100 | $2.8 | $280.00 |
| 500 | $2.52 | $1,260.00 |
| 1,000 | $2.24 | $2,240.00 |
Drop-in alternatives for ADUM1400ARWZ-RL7 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
ADUM1400ARWZ
✅ Drop-In✓ In Stock
$2.22 / Unit
View Datasheet →ADUM1400BRWZ
✅ Drop-In📋 Reference alternative (not in catalog)
ADUM1400CRWZ
✅ Drop-In📋 Reference alternative (not in catalog)
ADUM1401ARWZ
✅ Drop-In✓ In Stock
$2.19 / Unit
View Datasheet →ADUM1402ARWZ
✅ Drop-In📋 Reference alternative (not in catalog)
ISO7221
✅ Drop-In📋 Reference alternative (not in catalog)
SI8620
✅ Drop-In📋 Reference alternative (not in catalog)
ADUM1400ARWZ-RL7 Maximum Ratings & Electrical Characteristics
| Number of Channels | 4 |
| Channel Directionality | 4/0 (unidirectional) |
| Isolation Voltage | 2500 Vrms |
| Data Rate | 1 Mbps |
| Common-Mode Transient Immunity (CMTI) | 25 kV/µs |
| Supply Voltage (Side 1) | 2.7 V to 5.5 V |
| Supply Voltage (Side 2) | 2.7 V to 5.5 V |
| Propagation Delay | [DATA_NEEDED: Propagation Delay] |
| Pulse Width Distortion | [DATA_NEEDED: Pulse Width Distortion] |
| Operating Temperature Range | -40°C to +105°C |
| Package | 16-SOIC (0.295", 7.50mm Width) |
| Mounting Type | Surface Mount |
| RoHS Status | Compliant |
| Technology | iCoupler |
| Number of Pins | 16 |
ADUM1400ARWZ-RL7 Pin Configuration
| Pin 1 | VDD1 — Supply voltage side 1 |
| Pin 2 | GND1 — Ground side 1 |
| Pin 3 | VIA — Input channel A |
| Pin 4 | VIB — Input channel B |
| Pin 5 | VIC — Input channel C |
| Pin 6 | VID — Input channel D |
| Pin 7 | NC — No connect |
| Pin 8 | NC — No connect |
| Pin 9 | NC — No connect |
| Pin 10 | VOD — Output channel D |
| Pin 11 | VOC — Output channel C |
| Pin 12 | VOB — Output channel B |
| Pin 13 | VOA — Output channel A |
| Pin 14 | GND2 — Ground side 2 |
| Pin 15 | VDD2 — Supply voltage side 2 |
| Pin 16 | NC — No connect |
Safe Operating Area (SOA) & Thermal Characteristics
No official SOA curve available for this digital IC. Always operate within absolute maximum ratings specified in the datasheet. Ensure adequate cooling and derate as needed.
Typical Applications
ADUM1400ARWZ-RL7 is suitable for 6 applications: Industrial Fieldbus Isolation, Isolated SPI/UART Interface, Motor Control Isolation, Medical Device Isolation, Power Supply Monitoring, Isolated Sensor Interface.
Industrial Fieldbus Isolation
The ADUM1400ARWZ-RL7 provides galvanic isolation for industrial fieldbus interfaces like RS-485 and CAN. Its 2500 Vrms isolation and 25 kV/µs CMTI protect against ground loops and voltage transients in factory automation. The 1 Mbps data rate is sufficient for most fieldbus protocols, and the 4 unidirectional channels can isolate TX, RX, and control signals. The wide supply range (2.7V-5.5V) allows interfacing with 3.3V or 5V logic. Its low power consumption and compact SOIC-16 package make it ideal for space-constrained PLC modules.
Recommended
Isolated SPI/UART Interface
The ADUM1400ARWZ-RL7 is well-suited for isolating SPI or UART interfaces between microcontrollers and peripherals. Its 4 unidirectional channels can carry MOSI, MISO, SCK, and CS signals, or TX, RX, and control lines. The 1 Mbps data rate supports standard SPI clock speeds and UART baud rates. The high CMTI ensures reliable communication in noisy environments. The device's low propagation delay and pulse width distortion maintain signal integrity. It operates from 2.7V to 5.5V, enabling level shifting between different logic domains.
Recommended
Motor Control Isolation
In motor control systems, the ADUM1400ARWZ-RL7 isolates the microcontroller from high-voltage gate drivers and power stages. Its 2500 Vrms isolation protects low-voltage logic from motor supply transients. The 1 Mbps data rate is adequate for PWM control signals and feedback. The high CMTI (25 kV/µs) prevents false triggering during switching events. The device's wide temperature range (-40°C to +105°C) suits industrial motor drives. Its 4 channels can isolate PWM, enable, and fault signals.
Recommended
Medical Device Isolation
The ADUM1400ARWZ-RL7 provides patient isolation in medical devices, meeting safety standards for galvanic isolation. Its 2500 Vrms rating ensures protection against leakage currents. The 1 Mbps data rate is sufficient for monitoring signals like ECG or SpO2. The device's low power consumption is critical for battery-powered devices. The compact SOIC-16 package fits portable designs. Its high reliability and long-term stability make it suitable for life-critical applications.
Recommended
Power Supply Monitoring
The ADUM1400ARWZ-RL7 isolates digital monitoring signals from power supply rails. It can transmit status signals like power-good, fault, and enable across the isolation barrier. The 2500 Vrms isolation protects monitoring circuitry from high voltages. The 1 Mbps data rate is adequate for status updates. The device's wide supply range allows operation from the monitored rail or a separate logic supply. Its low power consumption minimizes load on the monitored supply.
Recommended
Isolated Sensor Interface
The ADUM1400ARWZ-RL7 isolates digital sensor outputs from the main controller, preventing ground loops and noise. It can transmit data from temperature, pressure, or proximity sensors. The 1 Mbps data rate supports most sensor communication protocols. The high CMTI ensures reliable data transfer in industrial environments. The device's 4 channels can carry data, clock, and control signals. Its wide temperature range suits harsh environments.
Recommended
Recommended Products Summary
Engineering reference data for ADUM1400ARWZ-RL7 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | ADUM1400ARWZ | ADUM1400BRWZ | ADUM1400CRWZ | ADUM1401ARWZ | ADUM1402ARWZ | ISO7221 | SI8620 |
|---|---|---|---|---|---|---|---|---|
| Package | 16-SOIC (0.295", 7.50mm Width) | 16-SOIC (same) | 16-SOIC (same) | 16-SOIC (same) | 16-SOIC (same) | 16-SOIC (same) | 16-SOIC (same) | 16-SOIC (same) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Texas Instruments | Silicon Labs |
| Number of Channels | 4 | 4 | 4 | 4 | 4 | 4 | 2 | 2 |
| Data Rate | 1 Mbps | 1 Mbps | 10 Mbps | 90 Mbps | 1 Mbps | 1 Mbps | 150 Mbps | 150 Mbps |
| Isolation Voltage | 2500 Vrms | 2500 Vrms | 2500 Vrms | 2500 Vrms | 2500 Vrms | 2500 Vrms | 2500 Vrms | 2500 Vrms |
| CMTI | 25 kV/µs | 25 kV/µs | 25 kV/µs | 25 kV/µs | 25 kV/µs | 25 kV/µs | 25 kV/µs | 35 kV/µs |
| Supply Voltage Range | 2.7V to 5.5V | 2.7V to 5.5V | 2.7V to 5.5V | 2.7V to 5.5V | 2.7V to 5.5V | 2.7V to 5.5V | 3.0V to 5.5V | 2.5V to 5.5V |
| Operating Temperature | -40°C to +105°C | -40°C to +105°C | -40°C to +105°C | -40°C to +105°C | -40°C to +105°C | -40°C to +105°C | -40°C to +125°C | -40°C to +125°C |
Key Differentiators
- 4 unidirectional channels in a single package (vs ISO7221)
- iCoupler technology with monolithic transformers (vs SI8620)
- Wide supply range (2.7V to 5.5V) (vs ISO7221)
Design Notes
For optimal isolation performance, maintain at least 8mm creepage and clearance distances between the input and output sides on the PCB. Use a solid ground plane under each side, but do not connect the grounds together except through the isolator. Place 0.1µF decoupling capacitors close to VDD1 and VDD2 pins to filter high-frequency noise.
The ADUM1400ARWZ-RL7 requires both VDD1 and VDD2 to be powered. Ensure each supply is within 2.7V to 5.5V. The device consumes low power, but decoupling is essential to maintain signal integrity. Use a 10µF bulk capacitor in addition to 0.1µF ceramic on each supply rail if the power source is far from the device.
Do not exceed the absolute maximum ratings, including isolation voltage and supply voltage. Ensure the input signals do not exceed the supply voltage. Avoid floating input pins; tie unused inputs to GND or VDD. Verify that the data rate does not exceed 1 Mbps to prevent data corruption.
Compliance Information
RoHS compliant per Analog Devices product page. Not AEC-Q100 qualified.
