ADUM141D0BRWZ-RL7 - Quad Digital Isolator 150Mbps | Analog Devices
MPN: ADUM141D0BRWZ-RL7 ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $4.5 | $4.50 |
| 10 | $4.05 | $40.50 |
| 100 | $3.6 | $360.00 |
| 500 | $3.24 | $1,620.00 |
| 1,000 | $2.88 | $2,880.00 |
Drop-in alternatives for ADUM141D0BRWZ-RL7 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
ADUM141D0BRWZ
✅ Drop-In✓ In Stock
$3.4 / Unit
View Datasheet →ADUM1411BRWZ
✅ Drop-In📋 Reference alternative (not in catalog)
ADUM4401BRWZ
✅ Drop-In📋 Reference alternative (not in catalog)
ADUM141D0BRWZ-RL7 Maximum Ratings & Electrical Characteristics
| Number of Channels | 4 |
| Channel Configuration | 3/1 (3 forward, 1 reverse) |
| Isolation Voltage | 3750 Vrms |
| Data Rate | 150 Mbps |
| CMTI | 75 kV/µs |
| Supply Voltage (VDD1) | 1.7 V to 5.5 V |
| Supply Voltage (VDD2) | 1.7 V to 5.5 V |
| Operating Temperature Range | -40°C to +125°C |
| Package | 16-SOIC (0.295", 7.50mm Width) |
| Mounting Type | Surface Mount |
| Propagation Delay | [DATA_NEEDED: Propagation delay] |
| Power Consumption | [DATA_NEEDED: Power consumption] |
| RoHS Status | Compliant |
| Lead-Free | Yes |
| Technology | iCoupler |
ADUM141D0BRWZ-RL7 Pin Configuration
| Pin 1 | VDD1 — Supply voltage for side 1 |
| Pin 2 | GND1 — Ground for side 1 |
| Pin 3 | VIA — Input channel A (forward) |
| Pin 4 | VIB — Input channel B (forward) |
| Pin 5 | VIC — Input channel C (forward) |
| Pin 6 | VOD — Output channel D (reverse) |
| Pin 7 | GND1 — Ground for side 1 |
| Pin 8 | NC — No connect |
| Pin 9 | NC — No connect |
| Pin 10 | GND2 — Ground for side 2 |
| Pin 11 | VID — Input channel D (reverse) |
| Pin 12 | VOA — Output channel A (forward) |
| Pin 13 | VOB — Output channel B (forward) |
| Pin 14 | VOC — Output channel C (forward) |
| Pin 15 | GND2 — Ground for side 2 |
| Pin 16 | VDD2 — Supply voltage for side 2 |
Safe Operating Area (SOA) & Thermal Characteristics
No official SOA curve available for this digital IC. Always operate within absolute maximum ratings specified in the datasheet. Ensure adequate cooling and derate as needed.
Typical Applications
ADUM141D0BRWZ-RL7 is suitable for 6 applications: Industrial Fieldbus Communication, Isolated SPI Interface, Motor Control and Power Inverters, Medical Equipment Isolation, Communication Systems, Data Acquisition Systems.
Industrial Fieldbus Communication
The ADUM141D0BRWZ-RL7 is ideal for industrial fieldbus systems such as PROFIBUS, CAN, and RS-485, where galvanic isolation is required to protect against ground loops and voltage transients. Its 150 Mbps data rate supports high-speed communication, while the 75 kV/µs CMTI ensures reliable operation in electrically noisy factory environments. The 3/1 channel configuration allows for a primary data path and a reverse control signal, making it suitable for protocols that require bidirectional communication. The wide supply voltage range (1.7V to 5.5V) enables direct interface with various logic levels used in industrial controllers. The 3750 Vrms isolation rating provides robust protection against voltage spikes, ensuring system safety and reliability.
Recommended
Isolated SPI Interface
The ADUM141D0BRWZ-RL7 is well-suited for isolating SPI buses between microcontrollers and peripheral devices such as ADCs, DACs, and sensors. Its 150 Mbps data rate easily handles SPI clock speeds up to 50 MHz, while the 3/1 channel configuration provides three forward channels for MOSI, SCLK, and CS, and one reverse channel for MISO. The low propagation delay ensures minimal timing skew, critical for high-speed SPI communication. The device's high CMTI prevents data corruption from fast transients in industrial environments. The wide supply range allows direct connection to 3.3V or 5V SPI interfaces without level shifting. This makes it an excellent choice for isolated data acquisition systems.
Recommended
Motor Control and Power Inverters
In motor control and power inverter applications, the ADUM141D0BRWZ-RL7 provides galvanic isolation between the low-voltage control circuitry and the high-voltage power stage. Its 3750 Vrms isolation rating ensures safe separation, while the 75 kV/µs CMTI prevents false triggering from fast switching transients in the power stage. The 150 Mbps data rate supports high-frequency PWM signals, enabling precise motor control. The 3/1 channel configuration can be used for three-phase gate drive signals and a reverse feedback signal. The wide operating temperature range (-40°C to +125°C) makes it suitable for harsh industrial environments. The device's robust design ensures reliable operation in high-vibration and high-temperature conditions.
Recommended
Medical Equipment Isolation
The ADUM141D0BRWZ-RL7 is suitable for medical equipment requiring patient isolation, such as ECG monitors, defibrillators, and infusion pumps. Its 3750 Vrms isolation rating meets the safety requirements for medical devices, providing protection against electric shock. The high data rate and CMTI ensure accurate transmission of physiological signals without interference. The wide supply voltage range allows integration with low-power medical sensors. The device's small SOIC-16 package is ideal for space-constrained medical devices. The RoHS compliance and lead-free construction meet environmental regulations for medical electronics. The robust design ensures long-term reliability in critical healthcare applications.
Recommended
Communication Systems
The ADUM141D0BRWZ-RL7 is used in communication systems to isolate digital interfaces between line cards, base stations, and network equipment. Its 150 Mbps data rate supports high-speed serial links, while the 3/1 channel configuration is ideal for isolating TX/RX data paths. The high CMTI ensures reliable operation in environments with electromagnetic interference. The wide supply range allows interface with various logic families used in telecom equipment. The device's low propagation delay minimizes latency in time-sensitive communication protocols. The 3750 Vrms isolation rating provides protection against lightning surges and ground potential differences, enhancing system robustness.
Recommended
Data Acquisition Systems
The ADUM141D0BRWZ-RL7 is ideal for isolating data acquisition systems where sensors and ADCs are located in remote or high-voltage environments. Its high data rate supports fast sampling rates, while the 3/1 channel configuration can isolate SPI or parallel data buses. The high CMTI prevents noise from corrupting measurement data. The wide supply range allows direct interface with 5V sensors and 3.3V ADCs. The device's low power consumption is beneficial for battery-powered data loggers. The 3750 Vrms isolation rating protects sensitive measurement circuitry from ground loops and transients, ensuring accurate and reliable data acquisition.
Recommended
Recommended Products Summary
Engineering reference data for ADUM141D0BRWZ-RL7 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | ADUM141D0BRWZ | ADUM141D0BRQZ-RL7 | ADUM141E0BRZ-RL7 | ADUM1411BRWZ |
|---|---|---|---|---|---|
| Package | 16-SOIC (0.295", 7.50mm Width) | 16-SOIC (0.295", 7.50mm Width) - same | 16-SOIC (0.154", 3.90mm Width) - different | 16-SOIC (0.154", 3.90mm Width) - different | 16-SOIC (0.295", 7.50mm Width) - same |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Isolation Voltage | 3750 Vrms | 3750 Vrms | 3750 Vrms | 3000 Vrms | 3750 Vrms |
| Data Rate | 150 Mbps | 150 Mbps | 150 Mbps | 150 Mbps | 150 Mbps |
| Channel Configuration | 3/1 | 3/1 | 3/1 | 3/1 | 1/3 |
| CMTI | 75 kV/µs | 75 kV/µs | 75 kV/µs | 75 kV/µs | 75 kV/µs |
| Supply Voltage Range | 1.7V to 5.5V | 1.7V to 5.5V | 1.7V to 5.5V | 1.7V to 5.5V | 1.7V to 5.5V |
| Operating Temperature | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C |
Key Differentiators
- Higher data rate (150 Mbps) compared to ADUM4401BRWZ (90 Mbps) (vs ADUM4401BRWZ)
- 3/1 channel configuration provides reverse channel for feedback (vs ADUM4401BRWZ)
- Wide supply voltage range (1.7V to 5.5V) supports low-voltage logic (vs ADUM4401BRWZ)
Design Notes
For optimal performance, place decoupling capacitors (0.1 µF and 10 µF) close to the VDD1 and VDD2 pins. Ensure a solid ground plane on both sides of the isolation barrier. Maintain adequate creepage and clearance distances (at least 8 mm for 3750 Vrms) between the two isolated grounds to meet safety standards.
Keep the high-speed signal traces as short as possible to minimize parasitic inductance and capacitance. Avoid routing sensitive signals near the isolation barrier. Use differential signaling if possible for high-speed data lines to reduce EMI. Reference the Analog Devices layout guidelines for iCoupler devices.
Do not exceed the absolute maximum ratings for supply voltage (7V) or input/output voltage. Ensure that the input signals do not exceed the supply voltage. Avoid floating unused inputs; tie them to a defined logic level. Verify that the total power dissipation does not exceed the package thermal limits.
Compliance Information
RoHS compliant per Analog Devices product page. Not AEC-Q100 qualified; automotive variants available in ADuM141E series.
