Microchip Technology

ATF22V10CQ-15XC - 15ns Glue-Logic PLD | Microchip

MPN: ATF22V10CQ-15XC ✗ End of Life
5 V Vdss 28-pin PLCC Package 15 ns Speed
MOQ: 1 |

ATF22V10CQ-15XC Overview

The Microchip ATF22V10CQ-15XC is a high-performance CMOS electrically erasable programmable logic device with 10 macrocells, approximately 500 gates, and a 15 ns speed grade. It is based on electrically erasable Flash memory and is packaged in a 28-pin PLCC. The device consolidates small quantities of combinational and sequential glue logic into one reprogrammable component, allowing design revisions without changing the PCB.

A programmable logic device, or PLD, is a digital semiconductor whose internal AND-array, OR-array, and flip-flop resources can be configured to implement custom Boolean functions. Within the broader hierarchy, an SPLD is a programmable logic device, an SPLD is a semiconductor, and the ATF22V10CQ-15XC is a 10-macrocell CMOS SPLD. Unlike a fixed gate array or FPGA, it is intended primarily for compact control, decoding, address mapping, state-machine, and interface logic rather than high-density parallel processing.

Key characteristics include a 15 ns device speed, 10 macrocells, and a stated family frequency of 83.3 MHz. Its electrically erasable Flash configuration supports reusable logic and simplifies firmware updates. The manufacturer datasheet also identifies low-power operation down to 10 uA typical for the ATF22V10C family, 200 mA latch-up immunity, and backward compatibility with the ATF22V10B(Q) and AT22V10(L) families. RoHS-compliant green-package options are identified for the ATF22V10CQ family.

The ATF22V10C architecture provides a practical balance between capacity and implementation effort. Each macrocell can contribute combinational product terms and registered logic, allowing compact encoders, decoders, counters, state machines, and control sequences. Because the device is electrically erasable and reprogrammable, it is useful for prototypes, production control logic, and field updates where changing a programmed logic pattern is more efficient than respinning a board.

Typical applications include DMA control, graphics-processing support, state-machine control, address decoding, PCI-interface glue logic, and general 5 V system control. The 10-macrocell structure can consolidate several small gates and flip-flops into a single package, reducing board area when the design does not require an FPGA or microcontroller.

PCB design should preserve the device's standard PLCC footprint, socket compatibility, and programming access. Keep power and ground connections short, provide a stable 5 V supply, and follow the manufacturer's programming-device and decoupling recommendations. Confirm the package drawing and pin assignment for the exact suffix before layout because PLCC and surface-mount options exist within the broader ATF22V10C family.

This product page combines the manufacturer's device description with package, speed, macrocell, technology, compliance, programming, and drop-in-replacement guidance. It also highlights practical differences among same-footprint family members so engineers can compare timing grade, temperature grade, and lifecycle considerations before committing a design.

Drop-in alternatives for ATF22V10CQ-15XC — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with ATF22V10CQ-15XC (same form factor and footprint) — differing in Device Type, Package, Supply Voltage.

Microchip Technology
Device Type: Electrically Erasable Programmable Logic Device (EEPLD)
Package: 28-PLCC (11.51 mm x 11.51 mm)
Supply Voltage: 5 V ± 10% for military and industrial grades; 5 V ± 5% for commercial grades
Compare with ATF22V10CQ-15XC →

ATF22V10CQ-15JU

✅ Drop-In
Microchip Technology
📦 PLCC-28
Electrically Erasable CMOS Programmable Logic Device (SPLD) · Simple PLD with AND-OR logic architecture · Electrically erasable Flash memory · 500 gates · 10 macrocells · 10 I/O pins · 83.3 MHz · 15 ns

Contact for price

View Datasheet →

ATF22V10CQ-15JI

✅ Drop-In
📦 PLCC-28
Same 10-macrocell ATF22V10CQ architecture and 15 ns speed class; the suffix denotes a different package or temperature designation.

📋 Reference alternative (not in catalog)

ATF22V10C-10XC

✅ Drop-In ⚠️ Specs Unverified
Microchip Technology
📦 PLCC-28
Electrically erasable programmable logic device (PLD) · ATF22V10C · 22V10, 10 macrocells · 500 gates · 10 macrocells · 10 ns for ATF22V10C-10XC · Down to 5 ns · Electrically erasable Flash memory

Contact for price

View Datasheet →

ATF22V10C-15JC

✅ Drop-In ⚠️ Specs Unverified
Microchip Technology
📦 PLCC-28
Electrically Erasable Programmable Logic Device (EEPLD) · CMOS electrically erasable Flash memory · 500 gates · 10 macrocells · 15 ns · Down to 5 ns · 5 V ± 10% for military and industrial grades; 5 V ± 5% for commercial grades · 10 µA

Contact for price

View Datasheet →

ATF22V10C-15JI

✅ Drop-In ⚠️ Specs Unverified
Microchip Technology
📦 PLCC-28
High-performance electrically erasable programmable logic device · CMOS electrically erasable Flash memory · 500 gate equivalents · 10 macrocells · 15 ns · 5 ns · 5 V · 5 V ±10%

Contact for price

View Datasheet →

ATF22V10CQ-15XC Maximum Ratings & Electrical Characteristics

Device Type Electrically erasable CMOS SPLD
Macrocells 10 macrocells
Approximate Logic Capacity 500 gates
Speed Grade 15 ns
Maximum Stated Family Frequency 83.3 MHz
Supply Voltage 5 V
Configuration Technology Electrically erasable Flash memory
Low-Power Dissipation 10 uA typical
Latch-Up Immunity 200 mA
Package 28-pin PLCC
Temperature Grade Commercial grade
Mounting Type Surface mount
Backward Compatibility Compatible with ATF22V10B(Q) and AT22V10(L) families
RoHS Status Compliant
Green Package Pb/Halide-free option
Number of Pins 28 pins
Programming Electrically erasable and reprogrammable

ATF22V10CQ-15XC pb/halide-free option Pin Configuration Guide

Pin configuration for ATF22V10CQ-15XC (pb/halide-free option package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

pb/halide-free option package pinout diagram for ATF22V10CQ-15XC

No detailed pinout data available for ATF22V10CQ-15XC.

Refer to the datasheet for full pin configuration.

Typical Applications

ATF22V10CQ-15XC is suitable for 6 applications: DMA Control Logic, State-Machine Control, PCI Interface Glue Logic, Address Decoding and Memory Control, 5 V System Glue Logic, Industrial Control and Instrumentation.

⚡

DMA Control Logic

The ATF22V10CQ-15XC fits compact DMA request, channel-enable, and sequencing logic because its 10 macrocells can combine registered state transitions with address and command decoding. The 15 ns speed class supports common 5 V control paths, while approximately 500 gates allow several small functions to share one package. A designer should verify the worst-case macrocell delay against the DMA timing budget and preserve the standard 28-pin PLCC footprint. Compared with a small microcontroller, the ATF22V10CQ-15XC offers direct combinational and sequential logic without firmware overhead, although its architecture is less flexible for extensive future expansion.

🔧

State-Machine Control

The ATF22V10CQ-15XC is suitable for compact state-machine control because each of its 10 macrocells can contribute registered logic alongside Boolean functions. A typical implementation can encode command sequencing, mode transitions, and output enables without implementing those functions as scattered gate logic. Its 15 ns grade provides timing margin for many 5 V control sequences, while the electrically erasable Flash configuration permits logic updates without replacing the device. Validate setup and hold requirements in the manufacturer's timing table, and check every used macrocell against the final fuse or programming-file allocation before release.

🖥️

PCI Interface Glue Logic

The ATF22V10CQ-15XC can consolidate PCI-interface command decoding, status-bit logic, and local control sequencing into a small 28-pin PLCC. Its 10 macrocells provide dedicated capacity for registered outputs and Boolean decode terms, while the 15 ns timing class is relevant to control-path rather than high-speed parallel data timing. The device's electrically erasable Flash configuration is useful when an interface-control revision requires a logic change without a PCB respin. System designers should confirm setup and hold timing for the PCI controller interface and verify the exact pin assignment in the manufacturer package drawing.

🖥️

Address Decoding and Memory Control

The ATF22V10CQ-15XC is a practical fit for compact address decoding, chip-select generation, and memory-control sequencing in 5 V systems. Approximately 500 gates and 10 macrocells allow decode equations and registered control outputs to coexist in one package, reducing board area compared with separate gate arrays. The 15 ns speed grade should be checked against address-to-select delay and clock-to-output requirements rather than assumed from the product family name. Because the architecture is a SPLD, the design must fit its macrocell structure; larger decoders or extensive control trees may require another ATF22V10C option or a different programmable-logic architecture.

🏭

5 V System Glue Logic

The ATF22V10CQ-15XC is designed for glue logic in 5 V systems, where several gates, flip-flops, and status decoders can be consolidated into one programmable package. Its electrically erasable Flash technology supports repeatable configuration and design revisions, while the approximately 10 uA typical low-power figure applies to the ATF22V10C family under its specified conditions. For an existing 5 V board, check supply tolerances, input thresholds, output drive, and power sequencing before replacing discrete logic. The main benefit is reduced component count and board area; the trade-off is that design changes remain constrained by the 10-macrocell architecture.

🏭

Industrial Control and Instrumentation

The ATF22V10CQ-15XC can implement deterministic command decoding, alarm logic, sequencing, and I/O control in industrial instrumentation where a microcontroller would be excessive. Its 10 macrocells provide a compact implementation space, and the 15 ns speed class is suitable for many control and decode paths. The exact XC suffix is associated with a commercial-grade order code, so environmental requirements should be reviewed against the manufacturer's temperature table before deployment. Compared with an MCU, the PLD offers deterministic combinational behavior and simple programming, but it requires the logic to be compiled into the device configuration and has less runtime flexibility.

What is ATF22V10CQ-15XC?
The ATF22V10CQ-15XC is a 10-macrocell CMOS simple programmable logic device with approximately 500 gates, a 15 ns speed grade, and electrically erasable Flash configuration memory. It is intended for compact glue logic, state-machine control, decoding, and other fixed-control functions. According to the Microchip ATF22V10C(Q) datasheet, the ATF22V10C family uses proven electrically erasable Flash technology and supports low-power dissipation down to 10 uA typical.
What are the key specifications of ATF22V10CQ-15XC?
The ATF22V10CQ-15XC combines 10 macrocells, approximately 500 gates, a 15 ns speed grade, and 5 V operation in a 28-pin PLCC package. The ATF22V10C family is also identified as CMOS and electrically erasable, with speeds down to 5 ns and power dissipation as low as 10 uA typical. These specifications place the device in the simple programmable logic device class rather than the FPGA or microcontroller categories.
Where can I download the ATF22V10CQ-15XC datasheet PDF?
The official ATF22V10C(Q) datasheet PDF is available from Microchip at the manufacturer document URL shown on this page. It covers the ATF22V10C and ATF22V10CQ families, including architecture, timing, electrical characteristics, package information, programming procedures, and ordering information. Use the pin-description table and package drawings in that document when assigning tracks or creating a new PCB footprint.
Where can I find the ATF22V10CQ-15XC pinout?
The ATF22V10CQ-15XC pin assignment is found in the pin-description table and package drawing in the Microchip ATF22V10C(Q) datasheet. Assign the PCB footprint directly from the 28-pin PLCC outline and pin numbering rather than relying on a generic PLCC symbol. The X package suffix identifies the PLCC option, while programming, power, ground, and I/O functions must be confirmed against the exact datasheet pin table.
Can ATF22V10CQ-15XC replace ATF22V10B or AT22V10 logic?
Yes, the manufacturer identifies the ATF22V10CQ family as backward-compatible with ATF22V10B(Q) and AT22V10(L) devices. Compatibility means the newer Flash-based ATF22V10C architecture was designed as an upgrade path for earlier erasable PLDs, but engineers should still verify package dimensions, pinout, active levels, timing, and programming requirements before treating an existing board as a literal drop-in replacement.
What can replace ATF22V10CQ-15XC?
The closest verified replacement is the 28-pin PLCC ATF22V10CQ-15JU, while ATF22V10CQ-15JI provides another same-family PLCC option. Both retain the 10-macrocell ATF22V10CQ architecture and 15 ns speed class, but temperature grade or qualification differs. No cross-manufacturer drop-in replacement is established for this exact PLCC footprint, so a functional substitute should not be assumed to be pin-to-pin compatible.
Is ATF22V10CQ-15XC the same as ATF22V10CQ-15JU?
No. The ATF22V10CQ-15XC and ATF22V10CQ-15JU share the ATF22V10CQ architecture, 10 macrocells, 15 ns speed grade, and 28-pin PLCC format, but their order codes encode different device grades. The XC suffix denotes the commercial-temperature option, while JU identifies another package or temperature designation. Confirm the exact suffix in the manufacturer ordering table for procurement and qualification.
What is the best cross-brand equivalent for ATF22V10CQ-15XC?
No cross-brand drop-in equivalent is established for the ATF22V10CQ-15XC. The device combines a specific 28-pin PLCC footprint, 10-macrocell Flash-programmable architecture, and 15 ns timing class, so a generic SPLD carrying a similar gate count is not automatically interchangeable. A responsible replacement should preserve the footprint, macrocell architecture, pin functions, supply voltage, timing, and programming method rather than relying only on a marketplace similarity score.
When should I choose ATF22V10CQ-15XC over ATF22V10C-10XC?
Choose ATF22V10CQ-15XC when a 15 ns speed grade is sufficient and the design benefits from the Q-family Flash-programmable implementation. Choose ATF22V10C-10XC when the faster 10 ns timing class is required by a critical path. Both belong to the 10-macrocell ATF22V10C family, so the decision should be based on timing margin, qualification grade, and availability rather than gate count.
Is ATF22V10CQ-15XC suitable for state-machine and DMA control?
Yes. The ATF22V10CQ-15XC is explicitly associated with state-machine control, DMA control, graphics-processing support, and glue logic for 5 V systems. Its 10 macrocells can implement compact registered control sequences and Boolean decoding without the resource overhead of a small microcontroller or FPGA. The 15 ns timing class should be checked against the worst-case propagation and clock requirements of the target logic.
What is the lead time for ATF22V10CQ-15XC?
The current manufacturer lead time for ATF22V10CQ-15XC is not stated on this page. Use the Request a Quote form on this page to request current availability, minimum order quantity, and lead time for the exact 28-pin PLCC order code. This legacy programmable logic device requires a complete Suffix check because different ATF22V10CQ package and temperature options are not interchangeable.
Where can I buy ATF22V10CQ-15XC online?
Use the Request a Quote form on this page to request ATF22V10CQ-15XC availability and a quotation for the exact suffix. The product is a 10-macrocell, 15 ns ATF22V10CQ device in a 28-pin PLCC package. Include the required commercial or industrial qualification level and programming-file details in the request so the supplied configuration can be matched correctly.
Is ATF22V10CQ-15XC in stock?
Current stock status for ATF22V10CQ-15XC changes by region and order quantity and should be confirmed through the Request a Quote form on this page. Submit the exact MPN ATF22V10CQ-15XC, the 28-pin PLCC package requirement, and the required quantity. This avoids confusion with the related ATF22V10CQ variants offered in other packages or temperature grades.
What is the price of ATF22V10CQ-15XC?
Use the Request a Quote form on this page for the current ATF22V10CQ-15XC quotation and stock position. Quote requests should identify the complete MPN, 28-pin PLCC package, commercial-grade suffix, and required quantity. Because programmed or legacy logic devices can vary by quantity and traceability requirement, the live quotation is more useful than a stale unit-price reference.
How does ATF22V10CQ-15XC compare with a GAL16V8 or ATF16V8?
The ATF22V10CQ-15XC is smaller than a 16-macrocell GAL16V8-class device, with 10 macrocells, approximately 500 gates, and a 15 ns speed grade. It also uses electrically erasable Flash configuration rather than a fuse-based or other legacy programming mechanism. Selection should consider macrocell count, architecture, package, speed, and programming tool support; a device with more gates cannot automatically implement a design written for a different PLD architecture.

Engineering reference data for ATF22V10CQ-15XC — comparison, design guidance, and compliance information.

Selection Guide

Choose ATF22V10CQ-15XC for compact 5 V glue logic, DMA or state-machine control, address decoding, and interface sequencing where the 10-macrocell ATF22V10CQ architecture and 15 ns speed class are sufficient. Choose ATF22V10C-10XC when the same architecture and PLCC footprint are needed but a faster 10 ns class provides necessary timing margin. Choose ATF22V10CQ-15JU or ATF22V10CQ-15JI when procurement or qualification requirements favor those suffix-defined grade options. Do not select the ATF16V8CZ-15XC merely because it shares the 15 ns designation; its 16-macrocell architecture and programming details differ. No cross-manufacturer drop-in has been established for the exact 28-pin PLCC device, so a functional equivalent should be treated as a redesign candidate until footprint, macrocell architecture, timing, and programming compatibility are proven.

Comparison with Alternatives

Parameter This Product ATF22V10CQ-15JU ATF22V10CQ-15JI ATF22V10C-10XC ATF22V10C-15JC ATF22V10C-15JI
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 28-pin PLCC 28-pin PLCC 28-pin PLCC 28-pin PLCC 28-pin PLCC 28-pin PLCC
Device Type Electrically erasable CMOS SPLD Electrically erasable CMOS SPLD Electrically erasable CMOS SPLD Electrically erasable CMOS SPLD Electrically erasable CMOS SPLD Electrically erasable CMOS SPLD
Macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells
Approximate Gate Capacity 500 gates 500 gates 500 gates 500 gates 500 gates 500 gates
Speed Grade 15 ns 15 ns 15 ns 10 ns 15 ns 15 ns
Supply Voltage 5 V 5 V 5 V 5 V 5 V 5 V
Configuration Memory Electrically erasable Flash Electrically erasable Flash Electrically erasable Flash Electrically erasable Flash Electrically erasable Flash Electrically erasable Flash
Low-Power Dissipation 10 uA typical family value 10 uA typical family value 10 uA typical family value 10 uA typical family value 10 uA typical family value 10 uA typical family value

Key Differentiators

  • Flash-programmable logic with 10 integrated macrocells (vs GAL16V8B-25LP)
  • Faster timing option within the same ATF22V10C family (vs ATF22V10C-10XC)
  • Compact 500-gate implementation for fixed control logic (vs ATF16V8CZ-15XC)

Design Notes

Assign the footprint directly from the 28-pin PLCC package drawing in the Microchip ATF22V10C(Q) datasheet. Confirm the socket or land pattern, pin-1 orientation, and exposed component clearance rather than relying on a generic PLCC library symbol. Keep power and ground connections short and place the required input and output decoupling capacitors close to their associated pins to minimize supply transients during programming and operation.

Do not treat every ATF22V10CQ order code as interchangeable solely because it has the same family name. The package, speed, temperature grade, and qualification requirements are encoded by the suffix. Before substitution, verify the 28-pin PLCC footprint, supply voltage, 15 ns timing requirement, macrocell allocation, and programming method. A device in a 24-pin SOIC or PDIP package requires PCB changes and is not a drop-in replacement.

For interfaces where the ATF22V10CQ-15XC output drives a clock, chip-select, or control line, check the receiver's setup and hold requirements against the device's worst-case clock-to-output and propagation delays. Keep these outputs away from sensitive analog or high-speed clock nodes, and use the manufacturer's timing information to establish any required synchronizing stages. The 15 ns grade should not be interpreted as a guaranteed margin for every external load or board trace.

Compliance Information

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Yes
Halogen Free
Yes
Conflict Minerals
Unknown

The ATF22V10CQ family documentation identifies Pb/Halide-free green-package options and RoHS compliance. REACH, automotive qualification, and conflict-minerals declarations are not stated.

Related Searches

ATF22V10CQ-15XC datasheet ATF22V10CQ-15XC datasheet pdf ATF22V10CQ-15XC pinout ATF22V10CQ-15XC equivalent ATF22V10CQ-15XC replacement ATF22V10CQ-15XC cross reference ATF22V10CQ-15XC vs ATF22V10C-10XC ATF22V10CQ-15XC PLCC footprint ATF22V10CQ-15XC application circuit Microchip ATF22V10CQ-15XC ATF22V10CQ-15XC price ATF22V10CQ-15XC stock

Related Components & Terms

Microchip Technology ATF22V10CQ-15XC ATF22V10CQ-15JU ATF22V10CQ-15JI ATF22V10C-10XC ATF22V10C-15JC ATF22V10C-15JI ATF22V10C ATF22V10B(Q) AT22V10(L) Simple Programmable Logic Device SPLD Electrically Erasable Flash CMOS 10 macrocells 500 gates 15 ns 83.3 MHz 5 V supply 28-pin PLCC PLCC package family surface mount DMA control state-machine control PCI interface glue logic
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details