Microchip Technology

ATF22V10CQ-15JU - 500-Gate 5V SPLD | Microchip Technology

MPN: ATF22V10CQ-15JU ✓ Active
5 V nominal Vdss 10 µA typical at family level Id 28-pin PLCC, 11.51 mm × 11.51 mm Package 83.3 MHz Speed Electrically erasable Flash memory Memory
MOQ: 1 |

ATF22V10CQ-15JU Overview

The Microchip Technology ATF22V10CQ-15JU is a 5V electrically erasable CMOS simple programmable logic device with 10 macrocells, 500 gates, 83.3 MHz maximum operating frequency, and 10 user I/O pins in a 28-pin PLCC package. The 15 ns speed grade supports deterministic control and decoding logic where a PAL-compatible architecture is preferable to a microcontroller.

A simple programmable logic device, or SPLD, is a user-programmable semiconductor that implements fixed Boolean functions through an AND-OR architecture. In the broader electronics hierarchy, an SPLD sits below a field-programmable gate array and above discrete gate arrays. It is programmed to implement address decoding, control sequencing, interface translation, and other fixed logic functions, then stores that configuration in electrically erasable Flash memory.

The ATF22V10CQ-15JU provides 10 macrocells, approximately 500 gates, a 15 ns speed designation, and operation from a 5V supply. The device family supports speeds down to 5 ns and typical standby power dissipation as low as 10 µA. Its nonvolatile Flash configuration allows the programmed logic to remain available without repeatedly loading a program after power is removed.

The electrically erasable CMOS implementation combines configurable logic density with low-power operation and 5V compatibility. The Q family designation identifies the qualified product family covered by the manufacturer datasheet, while the 15 speed grade and JU ordering code identify the specific performance and package configuration. These devices are useful when the logic requirement is stable, the design benefits from simple in-system programmability, and a full FPGA would add unnecessary cost or complexity.

Typical uses include peripheral address decoding, bus-interface arbitration, industrial control sequencing, legacy data-acquisition interfaces, and glue logic around older processors. In each case, the device replaces multiple gates and state-holding elements with one programmable component while retaining deterministic propagation timing. The 10 user I/O pins also make the device appropriate for compact control and status interfaces.

A critical implementation consideration is that the existing design must use the manufacturer pin-assignment and programming conventions for the ATF22V10C family. Confirm the PLCC footprint, supply decoupling, programming access, and unused I/O states in the manufacturer datasheet before releasing a new PCB. Any replacement must preserve the 28-pin PLCC footprint and the required 15 ns timing behavior.

This product page combines the manufacturer device description, catalog package details, drop-in alternatives, comparison parameters, and practical validation guidance. It is designed to help engineers evaluate ATF22V10CQ-15JU for legacy PLD upgrades, board repairs, and new designs that benefit from compact nonvolatile programmable logic.

Drop-in alternatives for ATF22V10CQ-15JU — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

ATF22V10C-15JU

✅ Drop-In
📦 28-PLCC (11.51 mm × 11.51 mm)
Base ATF22V10C ordering code instead of Q-family code; logic density is 500 gates, macrocell count is 10, and speed grade is 15 ns in both, with identical 28-pin PLCC construction

📋 Reference alternative (not in catalog)

ATF22V10CQ-15JI

✅ Drop-In
📦 28-PLCC (11.51 mm × 11.51 mm)
Different ordering suffix with the same 500-gate, 10-macrocell, 15 ns, 5V architecture and 28-pin PLCC package; qualification or temperature limits require confirmation

📋 Reference alternative (not in catalog)

ATF22V10CQ-15JC

✅ Drop-In
📦 28-PLCC (11.51 mm × 11.51 mm)
Different ordering suffix with the same 500-gate, 10-macrocell, 15 ns, 5V architecture and 28-pin PLCC package; operating-temperature limits may differ

📋 Reference alternative (not in catalog)

ATF22V10CQ-15SI

✅ Drop-In
📦 28-PLCC (11.51 mm × 11.51 mm)
Different ordering suffix with the same 500-gate, 10-macrocell, 15 ns, 5V architecture and 28-pin PLCC package; qualification and temperature requirements require confirmation

📋 Reference alternative (not in catalog)

ATF22V10CQ-15JU Maximum Ratings & Electrical Characteristics

Device Type Electrically Erasable CMOS Programmable Logic Device (SPLD)
Architecture Simple PLD with AND-OR logic architecture
Configuration Memory Electrically erasable Flash memory
Logic Density 500 gates
Macrocells 10 macrocells
User I/O Pins 10 I/O pins
Maximum Operating Frequency 83.3 MHz
Speed Grade 15 ns
Supply Voltage 5 V nominal
Industrial Supply Range 5 V ±10%
Minimum Standby Current 10 µA typical at family level
Package 28-pin PLCC, 11.51 mm × 11.51 mm
Lead Pitch 1.27 mm
Lead Geometry J-bend leads
Package Code S-PQCC-J28
Mounting Type Surface mount through PLCC socket or board layout
Delivery Format Tube

ATF22V10CQ-15JU s-pqcc-j28 Pin Configuration Guide

Pin configuration for ATF22V10CQ-15JU (s-pqcc-j28 package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

s-pqcc-j28 package pinout diagram for ATF22V10CQ-15JU

No detailed pinout data available for ATF22V10CQ-15JU.

Refer to the datasheet for full pin configuration.

Typical Applications

ATF22V10CQ-15JU is suitable for 6 applications: Legacy Processor Address Decoding, Industrial Control Sequencing, Data-Acquisition Interface Control, Bus Arbitration and Handshake Logic, Instrument Panel Control Logic, Legacy Interface Repair and Replacement.

🔧

Legacy Processor Address Decoding

The ATF22V10CQ-15JU fits processor address decoding because its 10 macrocells and approximately 500 gates can implement multiple chip-select or peripheral-enable equations at a 15 ns speed grade. Place the device between the processor address bus and peripheral control signals, then program the required Boolean terms for each decode region. The electrically erasable Flash configuration preserves the decoding map across power cycles, while the 5V supply and 28-pin PLCC package support established legacy control boards. Validate address setup and output timing against the processor interface before production, especially when the original design uses edge-sensitive latches or unusual active levels.

🏭

Industrial Control Sequencing

ATF22V10CQ-15JU is suitable for fixed industrial control sequences where several interlocks, state transitions, and actuator commands must operate deterministically. Its 10 macrocells provide logic capacity for state-holding and combinational decoding, and the 15 ns grade supports precise propagation control in equipment-control paths. The 5V operating point fits systems designed around legacy TTL or CMOS control logic, while nonvolatile Flash programming simplifies field updates to the logic equations. Use the manufacturer programming and pin-assignment information, and verify input levels, reset behavior, and output states during power-up testing.

📡

Data-Acquisition Interface Control

The ATF22V10CQ-15JU can control fixed data-acquisition front ends by generating converter enables, channel-selection signals, timing gates, and status multiplexing. Ten user I/O pins allow the device to bridge several slow control lines without occupying a full microcontroller or FPGA. Its approximately 500-gate capacity is appropriate for stable acquisition sequences that do not require adaptive software control, and the 15 ns speed grade provides useful timing margin relative to many legacy peripheral interfaces. During board bring-up, verify signal polarity, interlock timing, and the behavior of every output when the acquisition system is reset or unpowered.

🌐

Bus Arbitration and Handshake Logic

ATF22V10CQ-15JU fits deterministic bus-arbitration tasks that combine request, grant, busy, and ready signals into defined logic equations. The 10 macrocells provide enough parallel I/O for compact handshake networks, while the electrically erasable Flash configuration makes the arbitration map reproducible and easy to update. A 15 ns device grade is suitable for many older processor and peripheral buses when the design is checked against the slowest participating device. Use the exact ATF22V10C programming convention, keep contention paths short, and test simultaneous request conditions to prevent an invalid grant state.

🖥️

Instrument Panel Control Logic

The ATF22V10CQ-15JU can implement indicator sequencing, switch decoding, lamp blanking, and panel interlocks in legacy test and measurement equipment. Its 10 user I/O pins support several panel inputs and outputs, and the approximately 500-gate architecture is sufficient for fixed front-panel behavior without a processor. Nonvolatile configuration avoids repeating panel logic programming after every service visit. Because the PLCC package is intended for socketed or carefully handled surface-mount assembly, protect the leads during replacement and confirm that output states remain safe during reset, programming, and supply ramp conditions.

🛠️

Legacy Interface Repair and Replacement

ATF22V10CQ-15JU is particularly useful for repairing older control boards whose original programmable logic has become difficult to source. The 28-pin PLCC footprint, 10-macrocell architecture, 15 ns speed grade, and 5V supply allow an existing board to retain its established logic and timing. ATF22V10C-15JU offers the closest base-family drop-in, while other verified suffix variants can be evaluated when their qualification and temperature limits meet the equipment specification. After replacement, confirm the programmed configuration, verify every I/O under reset conditions, and run the original board-level functional test before returning the equipment to service.

Where can I buy ATF22V10CQ-15JU online?
The ATF22V10CQ-15JU can be requested through the Request a Quote form on this page for the exact 28-pin PLCC configuration. The request should include the required quantity, tube-packaging preference, and any date-code or traceability requirements. Microchip’s manufacturer page and the ATF22V10C(Q) datasheet identify the device as a 5V, 10-macrocell SPLD, allowing the quotation request to be matched without ambiguity.
What is the price of ATF22V10CQ-15JU?
Use the Request a Quote form on this page for the current unit price and quantity breaks for ATF22V10CQ-15JU. The device is a standard catalog part in a 28-pin PLCC package, and the quote can reflect the exact 15 ns grade and tube delivery format. Pricing may vary with order quantity, inventory condition, traceability, and requested delivery date.
What is the lead time for ATF22V10CQ-15JU?
The current lead time for ATF22V10CQ-15JU should be confirmed through the Request a Quote form on this page. When submitting the request, state the required quantity, tube-packaging requirement, date code, and target delivery date. Microchip’s catalog describes the part as a 28-PLCC SPLD, allowing procurement to confirm the exact orderable configuration without substituting a different package.
Is ATF22V10CQ-15JU in stock?
Current stock for ATF22V10CQ-15JU is confirmed through the Request a Quote form on this page. Include the required quantity and whether partial delivery is acceptable. The manufacturer datasheet identifies this MPN as the 15 ns ATF22V10CQ family member in a 28-pin PLCC package, so the quotation should remain tied to that exact MPN and package.
What are the key specifications of ATF22V10CQ-15JU that engineers should know?
The ATF22V10CQ-15JU is a 5V electrically erasable CMOS SPLD with 10 macrocells, approximately 500 gates, 83.3 MHz maximum operating frequency, 15 ns speed grade, and 10 user I/O pins. It uses a 28-pin PLCC package measuring 11.51 mm × 11.51 mm with 1.27 mm J-bend lead pitch. According to Microchip document doc0735, the family stores its configuration in electrically erasable Flash memory.
Where do I download the ATF22V10CQ-15JU datasheet PDF?
The ATF22V10CQ-15JU datasheet is available from Microchip’s official document page as Microchip document doc0735, titled ATF22V10C(Q) - Complete Datasheet. The document covers the ATF22V10C and ATF22V10CQ families, including their electrically erasable Flash architecture, speed options, supply conditions, and package information. Use the official PDF when defining the pin map, programming procedure, and operating limits.
Where can I find the ATF22V10CQ-15JU pinout?
The ATF22V10CQ-15JU pin assignment and package drawing are found in the pin-description and package sections of Microchip document doc0735. The device uses a 28-pin PLCC footprint with 1.27 mm pitch and J-bend leads. Assign PCB nets from that manufacturer table, and preserve the family-specific programming pins and power connections exactly when creating or modifying a board.
What is ATF22V10CQ-15JU used for?
ATF22V10CQ-15JU is used for compact programmable Boolean control logic, including address decoding, bus arbitration, command sequencing, and interface translation. Its 10 macrocells and approximately 500 gates provide enough capacity for fixed control functions without a larger FPGA. The electrically erasable Flash configuration preserves the programmed logic across power cycles and allows firmware or logic updates through the supported programming procedure.
ATF22V10CQ-15JU vs ATF22V10C-15JU - which is better?
ATF22V10C-15JU is a direct functional and package match for ATF22V10CQ-15JU in the ATF22V10C family. Both provide 10 macrocells, approximately 500 gates, a 15 ns grade, and 28-pin PLCC construction. The Q designation identifies membership in the qualified ATF22V10CQ family. For a board requiring the Q-family qualification status, retain ATF22V10CQ-15JU rather than changing the ordering code.
What is the difference between ATF22V10CQ-15JU and ATF22V10CQ-15JI?
ATF22V10CQ-15JU and ATF22V10CQ-15JI belong to the same ATF22V10CQ family and use the 28-pin PLCC format with 10 macrocells, approximately 500 gates, and a 15 ns grade. Their ordering codes differ in the qualification or temperature-related suffix. Review the exact operating-temperature limits and procurement requirements in the manufacturer datasheet before treating either part as interchangeable for every application.
When should I choose ATF22V10CQ-15JU over ATF22V10C-15JU?
Choose ATF22V10CQ-15JU when the design specifically calls for the Q-qualified ATF22V10CQ family and its associated ordering, documentation, or qualification requirements. Choose ATF22V10C-15JU when that Q-family designation is unnecessary and the base 28-pin PLCC device meets the application. Both offer the same 10-macrocell, 500-gate, 15 ns architecture, so the decision is primarily qualification and documentation rather than logic density.
Is ATF22V10CQ-15JU suitable for legacy interface decoding?
The ATF22V10CQ-15JU is suitable for legacy address decoding and fixed control logic because it provides 10 macrocells, approximately 500 gates, 10 user I/O pins, and a 15 ns speed grade at 5V. Its nonvolatile Flash configuration makes it practical for small systems that need programmable decoding without continuously executing processor firmware. Validate the timing, output states, and supply tolerances against the original system requirements.
What can replace ATF22V10CQ-15JU?
ATF22V10C-15JU is the closest verified drop-in replacement because it preserves the ATF22V10C architecture, 10 macrocells, approximately 500 gates, 15 ns speed grade, and 28-pin PLCC footprint. ATF22V10CQ-15JI and ATF22V10CQ-15JC retain the same family architecture and package, but their suffix-specific qualification or temperature requirements must be checked before substitution. No cross-brand drop-in replacement is established.
Can ATF22V10C-15JU replace ATF22V10CQ-15JU without PCB changes?
Yes, ATF22V10C-15JU can replace ATF22V10CQ-15JU on the same 28-pin PLCC footprint while retaining the 15 ns grade, 10 macrocells, approximately 500 gates, and matching device architecture. The programmer configuration and existing pin assignment remain the critical checks. This substitution does not automatically transfer every Q-family qualification requirement, so confirm the qualification language used in the target design.
What is the best Microchip Technology equivalent for ATF22V10CQ-15JU?
ATF22V10C-15JU is the closest Microchip Technology equivalent because it uses the same ATF22V10C logic family, 28-pin PLCC package, 10 macrocells, approximately 500 gates, and 15 ns speed grade. ATF22V10CQ-15JI and ATF22V10CQ-15JC are additional same-family PLCC options for design teams that can meet their suffix-specific qualification or temperature requirements. All must be checked against the original programming and timing constraints.

Engineering reference data for ATF22V10CQ-15JU — comparison, design guidance, and compliance information.

Selection Guide

Choose ATF22V10CQ-15JU when maintaining or designing a 5V system that specifically requires the ATF22V10CQ family ordering designation, 10 macrocells, approximately 500 gates, a 15 ns grade, and a 28-pin PLCC footprint. ATF22V10C-15JU is the closest base-family drop-in because its core architecture, speed, I/O count, and package match; it is appropriate when Q-family qualification status is not required by the product specification. ATF22V10CQ-15JI and ATF22V10CQ-15JC retain the same package and core logic, so they may suit programs with different suffix-specific qualification or temperature requirements. Confirm those suffix limits in the manufacturer documentation. For new designs, use ATF22V10C-15JU when the board specification does not call for the Q-family code. For new designs, use an SPLD only when fixed programmable logic and nonvolatile configuration are more appropriate than a microcontroller or FPGA.

Comparison with Alternatives

Parameter This Product ATF22V10C-15JU ATF22V10CQ-15JI ATF22V10CQ-15JC ATF22V10CQ-15SI
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 28-PLCC (11.51 mm × 11.51 mm) 28-PLCC, same footprint 28-PLCC, same footprint 28-PLCC, same footprint 28-PLCC, same footprint
Logic Density 500 gates 500 gates 500 gates 500 gates 500 gates
Macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells
User I/O 10 I/O pins 10 I/O pins 10 I/O pins 10 I/O pins 10 I/O pins
Speed Grade 15 ns 15 ns 15 ns 15 ns 15 ns
Maximum Operating Frequency 83.3 MHz 83.3 MHz 83.3 MHz 83.3 MHz 83.3 MHz
Supply Voltage 5 V nominal 5 V nominal 5 V nominal 5 V nominal 5 V nominal
Configuration Memory Electrically erasable Flash memory Electrically erasable Flash memory Electrically erasable Flash memory Electrically erasable Flash memory Electrically erasable Flash memory
Qualification Code Q-family ordering code Base ATF22V10C ordering code Q-family ordering code with I suffix Q-family ordering code with C suffix Q-family ordering code with S suffix

Key Differentiators

  • Combines a 500-gate architecture with 10 user I/O pins in a 28-pin PLCC (vs ATF22V10C-15JU)
  • Provides the same verified core logic parameters as the base-family drop-in (vs ATF22V10C-15JU)
  • Uses nonvolatile electrically erasable Flash configuration (vs ATF22V10CQ-15JI)

Design Notes

Use the manufacturer’s 28-pin PLCC footprint and 1.27 mm lead pitch rather than a generic DIP-28 land pattern. The PLCC body measures 11.51 mm × 11.51 mm and uses J-bend leads, so its pad geometry, lead length, and body clearance differ from a through-hole DIP. Confirm every power, ground, programming, and I/O net against the ATF22V10C(Q) pin-description table before PCB release.

Decouple the 5V supply close to the PLCC power pins, and route ground returns directly to the device ground pins rather than through peripheral-current paths. The ATF22V10C family is specified around a 5V nominal supply, with the industrial range stated as 5V ±10%. Check power-sequencing behavior and signal states during ramp because the programmed outputs may not remain valid until the supply and configuration conditions meet the manufacturer requirements.

Do not treat same-package suffix variants as automatically interchangeable for every program. The ATF22V10C-15JU, ATF22V10CQ-15JI, ATF22V10CQ-15JC, and ATF22V10CQ-15SI retain the same core logic density and 15 ns grade, but qualification and temperature requirements can differ. Confirm the ordering-code limits, load the correct programming file, and verify output states at power-up and reset before approving a substitution.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The manufacturer documentation identifies the ATF22V10C(Q) family, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was established for this ordering code.

Data verified on: 2026-11-17 — data verified and curated by XAIPART's component engineering team

Related Searches

ATF22V10CQ-15JU datasheet ATF22V10CQ-15JU pinout ATF22V10CQ-15JU datasheet pdf ATF22V10CQ-15JU equivalent ATF22V10CQ-15JU replacement ATF22V10CQ-15JU cross reference ATF22V10CQ-15JU price ATF22V10CQ-15JU stock Microchip ATF22V10CQ-15JU ATF22V10CQ-15JU 28 pin PLCC ATF22V10CQ-15JU address decoder ATF22V10CQ-15JU vs ATF22V10C-15JU

Related Components & Terms

Microchip Technology ATF22V10CQ-15JU ATF22V10C-15JU ATF22V10CQ-15JI ATF22V10CQ-15JC ATF22V10CQ-15SI ATF22V10CQ ATF22V10C SPLD simple programmable logic device PAL-compatible architecture electrically erasable Flash memory CMOS programmable logic AND-OR architecture 10 macrocells 500 gates 83.3 MHz 15 ns speed grade 5 V supply 28-pin PLCC S-PQCC-J28 J-bend lead 1.27 mm pitch processor address decoding bus arbitration
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details