ATF22V10CQ-15XC - 15ns Glue-Logic PLD | Microchip
MPN: ATF22V10CQ-15XC ✗ Son Kullanım ZamanıATF22V10CQ-15XC Genel Bakış
A programmable logic device, or PLD, is a digital semiconductor whose internal AND-array, OR-array, and flip-flop resources can be configured to implement custom Boolean functions. Within the broader hierarchy, an SPLD is a programmable logic device, an SPLD is a semiconductor, and the ATF22V10CQ-15XC is a 10-macrocell CMOS SPLD. Unlike a fixed gate array or FPGA, it is intended primarily for compact control, decoding, address mapping, state-machine, and interface logic rather than high-density parallel processing.
Key characteristics include a 15 ns device speed, 10 macrocells, and a stated family frequency of 83.3 MHz. Its electrically erasable Flash configuration supports reusable logic and simplifies firmware updates. The manufacturer datasheet also identifies low-power operation down to 10 uA typical for the ATF22V10C family, 200 mA latch-up immunity, and backward compatibility with the ATF22V10B(Q) and AT22V10(L) families. RoHS-compliant green-package options are identified for the ATF22V10CQ family.
The ATF22V10C architecture provides a practical balance between capacity and implementation effort. Each macrocell can contribute combinational product terms and registered logic, allowing compact encoders, decoders, counters, state machines, and control sequences. Because the device is electrically erasable and reprogrammable, it is useful for prototypes, production control logic, and field updates where changing a programmed logic pattern is more efficient than respinning a board.
Typical applications include DMA control, graphics-processing support, state-machine control, address decoding, PCI-interface glue logic, and general 5 V system control. The 10-macrocell structure can consolidate several small gates and flip-flops into a single package, reducing board area when the design does not require an FPGA or microcontroller.
PCB design should preserve the device's standard PLCC footprint, socket compatibility, and programming access. Keep power and ground connections short, provide a stable 5 V supply, and follow the manufacturer's programming-device and decoupling recommendations. Confirm the package drawing and pin assignment for the exact suffix before layout because PLCC and surface-mount options exist within the broader ATF22V10C family.
This product page combines the manufacturer's device description with package, speed, macrocell, technology, compliance, programming, and drop-in-replacement guidance. It also highlights practical differences among same-footprint family members so engineers can compare timing grade, temperature grade, and lifecycle considerations before committing a design.
Drop-in alternatifler için ATF22V10CQ-15XC — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller ATF22V10CQ-15XC (aynı form faktörü ve ayağa oturma) — farklı olan Device Type, Package, Supply Voltage.
ATF22V10CQ-15JU
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ATF22V10CQ-15JI
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
ATF22V10C-10XC
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ATF22V10C-15JC
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ATF22V10C-15JI
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ATF22V10CQ-15XC Maksimum Değerlendirmeler & Elektriksel Özellikler
| Device Type | Electrically erasable CMOS SPLD |
| Macrocells | 10 macrocells |
| Approximate Logic Capacity | 500 gates |
| Speed Grade | 15 ns |
| Maximum Stated Family Frequency | 83.3 MHz |
| Besleme Gerilimi | 5 V |
| Configuration Technology | Electrically erasable Flash memory |
| Low-Power Dissipation | 10 uA typical |
| Latch-Up Immunity | 200 mA |
| Paket | 28-pin PLCC |
| Temperature Grade | Commercial grade |
| Montaj Türü | Surface mount |
| Backward Compatibility | Compatible with ATF22V10B(Q) and AT22V10(L) families |
| RoHS Durumu | Compliant |
| Green Package | Pb/Halide-free option |
| Pin Sayısı | 28 pins |
| Programming | Electrically erasable and reprogrammable |
ATF22V10CQ-15XC pb/halide-free option Pin Yapısı Kılavuzu
ATF22V10CQ-15XC (pb/halide-free option paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: ATF22V10CQ-15XC.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
ATF22V10CQ-15XC için uygundur 6 uygulamas: DMA Control Logic, State-Machine Control, PCI Interface Glue Logic, Address Decoding and Memory Control, 5 V System Glue Logic, Industrial Control and Instrumentation.
DMA Control Logic
The ATF22V10CQ-15XC fits compact DMA request, channel-enable, and sequencing logic because its 10 macrocells can combine registered state transitions with address and command decoding. The 15 ns speed class supports common 5 V control paths, while approximately 500 gates allow several small functions to share one package. A designer should verify the worst-case macrocell delay against the DMA timing budget and preserve the standard 28-pin PLCC footprint. Compared with a small microcontroller, the ATF22V10CQ-15XC offers direct combinational and sequential logic without firmware overhead, although its architecture is less flexible for extensive future expansion.
Önerilen
State-Machine Control
The ATF22V10CQ-15XC is suitable for compact state-machine control because each of its 10 macrocells can contribute registered logic alongside Boolean functions. A typical implementation can encode command sequencing, mode transitions, and output enables without implementing those functions as scattered gate logic. Its 15 ns grade provides timing margin for many 5 V control sequences, while the electrically erasable Flash configuration permits logic updates without replacing the device. Validate setup and hold requirements in the manufacturer's timing table, and check every used macrocell against the final fuse or programming-file allocation before release.
Önerilen
PCI Interface Glue Logic
The ATF22V10CQ-15XC can consolidate PCI-interface command decoding, status-bit logic, and local control sequencing into a small 28-pin PLCC. Its 10 macrocells provide dedicated capacity for registered outputs and Boolean decode terms, while the 15 ns timing class is relevant to control-path rather than high-speed parallel data timing. The device's electrically erasable Flash configuration is useful when an interface-control revision requires a logic change without a PCB respin. System designers should confirm setup and hold timing for the PCI controller interface and verify the exact pin assignment in the manufacturer package drawing.
Önerilen
Address Decoding and Memory Control
The ATF22V10CQ-15XC is a practical fit for compact address decoding, chip-select generation, and memory-control sequencing in 5 V systems. Approximately 500 gates and 10 macrocells allow decode equations and registered control outputs to coexist in one package, reducing board area compared with separate gate arrays. The 15 ns speed grade should be checked against address-to-select delay and clock-to-output requirements rather than assumed from the product family name. Because the architecture is a SPLD, the design must fit its macrocell structure; larger decoders or extensive control trees may require another ATF22V10C option or a different programmable-logic architecture.
Önerilen
5 V System Glue Logic
The ATF22V10CQ-15XC is designed for glue logic in 5 V systems, where several gates, flip-flops, and status decoders can be consolidated into one programmable package. Its electrically erasable Flash technology supports repeatable configuration and design revisions, while the approximately 10 uA typical low-power figure applies to the ATF22V10C family under its specified conditions. For an existing 5 V board, check supply tolerances, input thresholds, output drive, and power sequencing before replacing discrete logic. The main benefit is reduced component count and board area; the trade-off is that design changes remain constrained by the 10-macrocell architecture.
Önerilen
Industrial Control and Instrumentation
The ATF22V10CQ-15XC can implement deterministic command decoding, alarm logic, sequencing, and I/O control in industrial instrumentation where a microcontroller would be excessive. Its 10 macrocells provide a compact implementation space, and the 15 ns speed class is suitable for many control and decode paths. The exact XC suffix is associated with a commercial-grade order code, so environmental requirements should be reviewed against the manufacturer's temperature table before deployment. Compared with an MCU, the PLD offers deterministic combinational behavior and simple programming, but it requires the logic to be compiled into the device configuration and has less runtime flexibility.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: ATF22V10CQ-15XC — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | ATF22V10CQ-15JU | ATF22V10CQ-15JI | ATF22V10C-10XC | ATF22V10C-15JC | ATF22V10C-15JI |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-pin PLCC | 28-pin PLCC | 28-pin PLCC | 28-pin PLCC | 28-pin PLCC | 28-pin PLCC |
| Device Type | Electrically erasable CMOS SPLD | Electrically erasable CMOS SPLD | Electrically erasable CMOS SPLD | Electrically erasable CMOS SPLD | Electrically erasable CMOS SPLD | Electrically erasable CMOS SPLD |
| Macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells |
| Approximate Gate Capacity | 500 gates | 500 gates | 500 gates | 500 gates | 500 gates | 500 gates |
| Speed Grade | 15 ns | 15 ns | 15 ns | 10 ns | 15 ns | 15 ns |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Configuration Memory | Electrically erasable Flash | Electrically erasable Flash | Electrically erasable Flash | Electrically erasable Flash | Electrically erasable Flash | Electrically erasable Flash |
| Low-Power Dissipation | 10 uA typical family value | 10 uA typical family value | 10 uA typical family value | 10 uA typical family value | 10 uA typical family value | 10 uA typical family value |
Ana Farklılayıcılar
- Flash-programmable logic with 10 integrated macrocells (karşılaştırma:GAL16V8B-25LP)
- Faster timing option within the same ATF22V10C family (karşılaştırma:ATF22V10C-10XC)
- Compact 500-gate implementation for fixed control logic (karşılaştırma:ATF16V8CZ-15XC)
Tasarım Notları
Assign the footprint directly from the 28-pin PLCC package drawing in the Microchip ATF22V10C(Q) datasheet. Confirm the socket or land pattern, pin-1 orientation, and exposed component clearance rather than relying on a generic PLCC library symbol. Keep power and ground connections short and place the required input and output decoupling capacitors close to their associated pins to minimize supply transients during programming and operation.
Do not treat every ATF22V10CQ order code as interchangeable solely because it has the same family name. The package, speed, temperature grade, and qualification requirements are encoded by the suffix. Before substitution, verify the 28-pin PLCC footprint, supply voltage, 15 ns timing requirement, macrocell allocation, and programming method. A device in a 24-pin SOIC or PDIP package requires PCB changes and is not a drop-in replacement.
For interfaces where the ATF22V10CQ-15XC output drives a clock, chip-select, or control line, check the receiver's setup and hold requirements against the device's worst-case clock-to-output and propagation delays. Keep these outputs away from sensitive analog or high-speed clock nodes, and use the manufacturer's timing information to establish any required synchronizing stages. The 15 ns grade should not be interpreted as a guaranteed margin for every external load or board trace.
Uyumluluk Bilgisi
The ATF22V10CQ family documentation identifies Pb/Halide-free green-package options and RoHS compliance. REACH, automotive qualification, and conflict-minerals declarations are not stated.