ATF22V10CQ-15XI - 500-Gate 15ns 24-TSSOP PLD | Microchip
MPN: ATF22V10CQ-15XI ✓ ActiveATF22V10CQ-15XI Overview
An EEPLD, or electrically erasable programmable logic device, is a user-programmable semiconductor that stores a logic configuration in nonvolatile Flash memory. It occupies a middle position between simple fixed-function gates and larger FPGAs. The ATF22V10CQ-15XI belongs to the broader PLD family, combining combinational and registered logic resources with a compact surface-mount footprint for glue-logic, control, decoding, and interface-control designs.
The device provides 10 macrocells, approximately 500 gates, 24 I/O positions, and operation up to 83.3 MHz. Its 15 ns speed designation supports designs requiring deterministic propagation timing. Electrically erasable Flash technology allows the configuration to be reprogrammed during development, production, or field updates, while a typical low-power figure of 10 microamperes supports low-duty-cycle embedded control and legacy equipment modernization.
The ATF22V10CQ family uses a 5 V supply and CMOS implementation. Because the configuration is stored in Flash rather than volatile memory, the programmed logic remains available after power is removed. The 24-pin TSSOP package is suitable for compact industrial, communications, consumer, and legacy control boards, although designers should confirm timing, output-drive, and power specifications against the manufacturer datasheet for the selected system voltage and temperature range.
Typical uses include address decoding, control-signal multiplexing, keyboard and display controllers, interface glue logic, small state machines, and industrial equipment upgrades. In a replacement design, the PLD can consolidate several gates, counters, and combinational functions into one programmable component, reducing component count while retaining field-update flexibility.
The principal design consideration is compatibility: logic equations, pin assignments, timing constraints, and supply requirements must be reviewed before replacing an existing device. The 24-TSSOP footprint also requires adequate copper clearance and solderable land geometry, while programming must use a compatible device programmer and the correct configuration file.
This product record combines the Microchip family architecture, verified package and speed information, drop-in replacement analysis, practical programming guidance, and parameter-by-parameter comparison to support schematic review, PCB compatibility checks, and sourcing decisions.
Drop-in alternatives for ATF22V10CQ-15XI — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
ATF22V10CQ-15XC
✅ Drop-InContact for price
View Datasheet →ATF22V10CQ-15XL
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
ATF22V10CQ-10XC
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
ATF22V10CQ-10XI
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
ATF22V10CQ-20XC
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
ATF22V10CQ-15XI Maximum Ratings & Electrical Characteristics
| Device Type | Electrically Erasable Programmable Logic Device (EEPLD) |
| Architecture | High-performance CMOS electrically erasable programmable logic device |
| Configuration Memory Technology | Electrically erasable Flash memory |
| Number of Macrocells | 10 macrocells |
| Equivalent Logic Capacity | Approximately 500 gates |
| Input Count | 24 inputs |
| Output Count | 10 outputs |
| Total I/O Count | 24 I/O positions |
| Speed Grade | 15 ns |
| Maximum Operating Frequency | 83.3 MHz |
| Operating Supply Voltage | 5 V |
| Family Speed Range | Down to 5 ns |
| Typical Power Dissipation | 10 microamperes |
| Package | 24-pin TSSOP |
| Mounting Type | Surface mount |
| Logic Type | SPLD |
ATF22V10CQ-15XI 24-pin tssop Pin Configuration Guide
Pin configuration for ATF22V10CQ-15XI (24-pin tssop package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for ATF22V10CQ-15XI.
Refer to the datasheet for full pin configuration.
Typical Applications
ATF22V10CQ-15XI is suitable for 6 applications: Industrial Address Decoding, Interface Control Logic, Legacy Equipment Modernization, Keyboard and Display Control, Embedded Sequencing and Control, Communications Adapter Logic.
Industrial Address Decoding
The ATF22V10CQ-15XI fits compact address-decoding and command-routing logic where a 5 V control system must interpret several address or enable inputs. Its 10 macrocells and approximately 500 gates provide enough programmable logic to combine decoding equations, register selected commands, and suppress glitches without a separate gate-logic cascade. The 15 ns speed grade supports operation up to 83.3 MHz. A 24-TSSOP package also allows a compact replacement for older SOIC- or PLCC-based boards when the land pattern and pin functions are verified. Engineers should confirm every power, input, output, and programming connection against the manufacturer pin table before treating it as a direct replacement.
Recommended
Interface Control Logic
The ATF22V10CQ-15XI can implement protocol state machines, command qualification, and data-routing logic between otherwise unrelated digital blocks. With 24 I/O positions, 10 macrocells, and a 15 ns grade, the device provides a practical way to coordinate handshake signals, mux selections, and interrupt requests. Its electrically erasable Flash configuration allows logic changes during equipment qualification or field maintenance without changing the PCB. The 83.3 MHz family operating frequency provides useful timing margin for moderate-speed control paths. Because the device is not a general-purpose microcontroller, designers should map all state and timing behavior into the programming tool and verify setup, hold, and output constraints against the datasheet.
Recommended
Legacy Equipment Modernization
The ATF22V10CQ-15XI is useful when modernizing older 5 V equipment that used several TTL and CMOS gates for control, counting, or signal conditioning. Its 10 programmable macrocells can consolidate repetitive Boolean functions, and Flash-based configuration makes engineering revisions easier than masked PLD implementations. The 24-TSSOP footprint helps reduce board-space requirements when replacing larger SOIC logic. A drop-in migration is practical only after comparing pin names, supply pins, control functions, and timing limits with the original device. Engineers should also preserve or deliberately update the configuration file, since changing package code does not automatically translate the programmed logic or environmental qualification.
Recommended
Keyboard and Display Control
The ATF22V10CQ-15XI can implement scanning, key-state decoding, display multiplexing, and indicator control in compact human-interface equipment. Its 24 I/O positions allow keyboard inputs and display-control outputs to be combined with programmable debounce or sequencing functions, while the 10-macrocell limit keeps the design appropriate for small control panels rather than graphics processors. The 5 V supply matches many legacy display and keyboard circuits, and the 15 ns grade supports moderate scan timing. The 24-TSSOP package supports compact board layouts, but engineers must account for package orientation, signal timing, and output drive. Programming the final scan and display equations during hardware bring-up simplifies changes to key layouts or indicator behavior.
Recommended
Embedded Sequencing and Control
The ATF22V10CQ-15XI can implement a compact sequencer, command scheduler, or discrete controller for systems that do not justify a microcontroller. Ten macrocells and approximately 500 gates are sufficient for multi-step state transitions, interlocks, timing qualifiers, and output defaults, while operation up to 83.3 MHz supports faster control than a purely mechanical relay sequence. Electrically erasable Flash lets engineers revise the sequence without replacing the component. The principal constraint is capacity and I/O distribution rather than software flexibility: complex branching, arithmetic, and extensive diagnostics are better assigned to a microcontroller. Keep the PLD functions bounded, document every macrocell equation, and verify reset, power-up, and timing behavior in the manufacturer programming environment.
Recommended
Communications Adapter Logic
The ATF22V10CQ-15XI can bridge simple legacy communication peripherals by performing bit-rate normalization, framing assistance, buffer control, and command multiplexing. Its 24 I/O positions provide sufficient connectivity for parallel data, status, and handshake paths, while the 15 ns speed grade supports operation up to 83.3 MHz for moderate-rate logic. Electrically erasable Flash configuration is particularly useful when adapting a family of related adapters that share most hardware but require different control equations. Designers should keep the PLD outside high-speed analog or impedance-sensitive paths, use external drivers where required, and verify input thresholds and output timing at the 5 V operating condition. The programmed configuration should be archived with the adapter firmware for maintainability.
Recommended
Recommended Products Summary
Engineering reference data for ATF22V10CQ-15XI — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | ATF22V10CQ-15XC | ATF22V10CQ-15XL | ATF22V10CQ-10XC | ATF22V10CQ-10XI | ATF22V10CQ-20XC |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 24-TSSOP | 24-TSSOP | 24-TSSOP | 24-TSSOP | 24-TSSOP | 24-TSSOP |
| Device Type | Electrically erasable PLD | Electrically erasable PLD | Electrically erasable PLD | Electrically erasable PLD | Electrically erasable PLD | Electrically erasable PLD |
| Macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells |
| Logic Capacity | Approximately 500 gates | Approximately 500 gates | Approximately 500 gates | Approximately 500 gates | Approximately 500 gates | Approximately 500 gates |
| Speed Grade | 15 ns | 15 ns | 15 ns | 10 ns | 10 ns | 20 ns |
| Operating Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Configuration Memory | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory |
| I/O Count | 24 I/O positions | 24 I/O positions | 24 I/O positions | 24 I/O positions | 24 I/O positions | 24 I/O positions |
Key Differentiators
- Matches the 15 ns ATF22V10CQ performance grade (vs ATF22V10CQ-10XC)
- Provides a 10-macrocell, approximately 500-gate programmable architecture in a compact 24-TSSOP package (vs ATF22V10CQ-15XC)
- Offers the same 83.3 MHz family operating frequency as the 15 ns alternatives (vs ATF22V10CQ-15XL)
Design Notes
Use the manufacturer 24-TSSOP land pattern and verify pin 1 orientation against the PCB silkscreen and package marking. A drop-in software or MPN decision does not eliminate footprint checking: keep exposed pad, lead pitch, solder-mask, and paste geometry within assembly-house capability. Review every power, ground, input, output, and programming signal against the datasheet pin table before releasing artwork.
Estimate the 5 V rail budget from the selected ATF22V10CQ grade, enabled macrocell count, output loading, and switching activity rather than using the family's 10 microampere typical low-power figure alone. Provide local input and output decoupling according to the manufacturer layout guidance, maintain the required supply range, and include the PLD current plus programming-fixture and interface loads in the power design.
Do not treat equal macrocell count and speed as sufficient proof of interchangeability. Confirm that the alternative uses the same 24-TSSOP pinout, has compatible power and programming pins, satisfies the system's setup and hold timing, and is supported by the selected programmer. For the ATF22V10CQ-10XC and ATF22V10CQ-10XI alternatives, the 10 ns grade is faster than the 15 ns target and may change timing assumptions but should preserve the footprint.
Keep clock, reset, and high-fanout decode paths short, and avoid routing programming or control signals beside sensitive analog traces where practical. Preserve a clear ground-return path and place decoupling close to the device supply pins. Because the ATF22V10CQ-15XI can operate up to 83.3 MHz, use controlled impedance where timing-critical nets leave the device and follow the manufacturer's recommended input, output, and unused-pin treatment.
Compliance Information
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the exact ordering code. Confirm current declarations for the selected Microchip part.