Microchip Technology

ATF22V10CQ-15XI - 500-Gate 15ns 24-TSSOP PLD | Microchip

Teilenummer: ATF22V10CQ-15XI ✓ Aktiv
5 V Vdss 24-pin TSSOP Package 15 ns Speed Electrically erasable Flash memory Memory
MOQ: 1 |

ATF22V10CQ-15XI Übersicht

The Microchip ATF22V10CQ-15XI is a high-performance electrically erasable programmable logic device with 10 macrocells, approximately 500 logic gates, a 15 ns speed grade, and a 5 V operating supply in a 24-pin TSSOP package. It combines a 24-input, 10-output architecture with electrically erasable Flash memory, providing field-programmable logic without a dedicated external SRAM or mask-programming step.

An EEPLD, or electrically erasable programmable logic device, is a user-programmable semiconductor that stores a logic configuration in nonvolatile Flash memory. It occupies a middle position between simple fixed-function gates and larger FPGAs. The ATF22V10CQ-15XI belongs to the broader PLD family, combining combinational and registered logic resources with a compact surface-mount footprint for glue-logic, control, decoding, and interface-control designs.

The device provides 10 macrocells, approximately 500 gates, 24 I/O positions, and operation up to 83.3 MHz. Its 15 ns speed designation supports designs requiring deterministic propagation timing. Electrically erasable Flash technology allows the configuration to be reprogrammed during development, production, or field updates, while a typical low-power figure of 10 microamperes supports low-duty-cycle embedded control and legacy equipment modernization.

The ATF22V10CQ family uses a 5 V supply and CMOS implementation. Because the configuration is stored in Flash rather than volatile memory, the programmed logic remains available after power is removed. The 24-pin TSSOP package is suitable for compact industrial, communications, consumer, and legacy control boards, although designers should confirm timing, output-drive, and power specifications against the manufacturer datasheet for the selected system voltage and temperature range.

Typical uses include address decoding, control-signal multiplexing, keyboard and display controllers, interface glue logic, small state machines, and industrial equipment upgrades. In a replacement design, the PLD can consolidate several gates, counters, and combinational functions into one programmable component, reducing component count while retaining field-update flexibility.

The principal design consideration is compatibility: logic equations, pin assignments, timing constraints, and supply requirements must be reviewed before replacing an existing device. The 24-TSSOP footprint also requires adequate copper clearance and solderable land geometry, while programming must use a compatible device programmer and the correct configuration file.

This product record combines the Microchip family architecture, verified package and speed information, drop-in replacement analysis, practical programming guidance, and parameter-by-parameter comparison to support schematic review, PCB compatibility checks, and sourcing decisions.

Drop-in-Alternativen für ATF22V10CQ-15XI – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

ATF22V10CQ-15XC

✅ Drop-In
Microchip Technology
📦 24-TSSOP
Electrically erasable CMOS SPLD · 10 macrocells · 500 gates · 15 ns · 83.3 MHz · 5 V · Electrically erasable Flash memory · 10 uA typical

Preis auf Anfrage

Datenblatt ansehen →

ATF22V10CQ-15XL

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 24-TSSOP
Same 24-TSSOP footprint, 10 macrocells, 500-gate architecture, 5 V supply, and 15 ns speed; ordering-grade temperature designation differs, so verify the grade

📋 Referenzalternative (nicht im Katalog)

ATF22V10CQ-10XC

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 24-TSSOP
Same 10-macrocell, 500-gate, 5 V architecture and 24-TSSOP footprint; speed changes from 15 ns to 10 ns, a 5 ns or 33.3% improvement

📋 Referenzalternative (nicht im Katalog)

ATF22V10CQ-10XI

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 24-TSSOP
Same 10-macrocell, 500-gate, 5 V architecture and 24-TSSOP footprint; speed changes from 15 ns to 10 ns, a 5 ns or 33.3% improvement

📋 Referenzalternative (nicht im Katalog)

ATF22V10CQ-20XC

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 24-TSSOP
Same 10-macrocell, 500-gate, 5 V architecture and 24-TSSOP footprint; speed changes from 15 ns to 20 ns, a 5 ns or 33.3% reduction

📋 Referenzalternative (nicht im Katalog)

ATF22V10CQ-15XI Grenzwerte & elektrische Eigenschaften

Device Type Electrically Erasable Programmable Logic Device (EEPLD)
Architecture High-performance CMOS electrically erasable programmable logic device
Configuration Memory Technology Electrically erasable Flash memory
Number of Macrocells 10 macrocells
Equivalent Logic Capacity Approximately 500 gates
Input Count 24 inputs
Output Count 10 outputs
Total I/O Count 24 I/O positions
Speed Grade 15 ns
Maximum Operating Frequency 83.3 MHz
Betriebsversorgungsspannung 5 V
Family Speed Range Down to 5 ns
Typical Power Dissipation 10 microamperes
Gehäuse 24-pin TSSOP
Montageart Surface mount
Logic Type SPLD

ATF22V10CQ-15XI 24-pin tssop Pinbelegungsleitfaden

Pinbelegung für ATF22V10CQ-15XI (24-pin tssop-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für ATF22V10CQ-15XI im 24-pin tssop-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für ATF22V10CQ-15XI.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

ATF22V10CQ-15XI ist geeignet für 6 Anwendungs: Industrial Address Decoding, Interface Control Logic, Legacy Equipment Modernization, Keyboard and Display Control, Embedded Sequencing and Control, Communications Adapter Logic.

🏭

Industrial Address Decoding

The ATF22V10CQ-15XI fits compact address-decoding and command-routing logic where a 5 V control system must interpret several address or enable inputs. Its 10 macrocells and approximately 500 gates provide enough programmable logic to combine decoding equations, register selected commands, and suppress glitches without a separate gate-logic cascade. The 15 ns speed grade supports operation up to 83.3 MHz. A 24-TSSOP package also allows a compact replacement for older SOIC- or PLCC-based boards when the land pattern and pin functions are verified. Engineers should confirm every power, input, output, and programming connection against the manufacturer pin table before treating it as a direct replacement.

🌐

Interface Control Logic

The ATF22V10CQ-15XI can implement protocol state machines, command qualification, and data-routing logic between otherwise unrelated digital blocks. With 24 I/O positions, 10 macrocells, and a 15 ns grade, the device provides a practical way to coordinate handshake signals, mux selections, and interrupt requests. Its electrically erasable Flash configuration allows logic changes during equipment qualification or field maintenance without changing the PCB. The 83.3 MHz family operating frequency provides useful timing margin for moderate-speed control paths. Because the device is not a general-purpose microcontroller, designers should map all state and timing behavior into the programming tool and verify setup, hold, and output constraints against the datasheet.

🔧

Legacy Equipment Modernization

The ATF22V10CQ-15XI is useful when modernizing older 5 V equipment that used several TTL and CMOS gates for control, counting, or signal conditioning. Its 10 programmable macrocells can consolidate repetitive Boolean functions, and Flash-based configuration makes engineering revisions easier than masked PLD implementations. The 24-TSSOP footprint helps reduce board-space requirements when replacing larger SOIC logic. A drop-in migration is practical only after comparing pin names, supply pins, control functions, and timing limits with the original device. Engineers should also preserve or deliberately update the configuration file, since changing package code does not automatically translate the programmed logic or environmental qualification.

📺

Keyboard and Display Control

The ATF22V10CQ-15XI can implement scanning, key-state decoding, display multiplexing, and indicator control in compact human-interface equipment. Its 24 I/O positions allow keyboard inputs and display-control outputs to be combined with programmable debounce or sequencing functions, while the 10-macrocell limit keeps the design appropriate for small control panels rather than graphics processors. The 5 V supply matches many legacy display and keyboard circuits, and the 15 ns grade supports moderate scan timing. The 24-TSSOP package supports compact board layouts, but engineers must account for package orientation, signal timing, and output drive. Programming the final scan and display equations during hardware bring-up simplifies changes to key layouts or indicator behavior.

🧩

Embedded Sequencing and Control

The ATF22V10CQ-15XI can implement a compact sequencer, command scheduler, or discrete controller for systems that do not justify a microcontroller. Ten macrocells and approximately 500 gates are sufficient for multi-step state transitions, interlocks, timing qualifiers, and output defaults, while operation up to 83.3 MHz supports faster control than a purely mechanical relay sequence. Electrically erasable Flash lets engineers revise the sequence without replacing the component. The principal constraint is capacity and I/O distribution rather than software flexibility: complex branching, arithmetic, and extensive diagnostics are better assigned to a microcontroller. Keep the PLD functions bounded, document every macrocell equation, and verify reset, power-up, and timing behavior in the manufacturer programming environment.

📱

Communications Adapter Logic

The ATF22V10CQ-15XI can bridge simple legacy communication peripherals by performing bit-rate normalization, framing assistance, buffer control, and command multiplexing. Its 24 I/O positions provide sufficient connectivity for parallel data, status, and handshake paths, while the 15 ns speed grade supports operation up to 83.3 MHz for moderate-rate logic. Electrically erasable Flash configuration is particularly useful when adapting a family of related adapters that share most hardware but require different control equations. Designers should keep the PLD outside high-speed analog or impedance-sensitive paths, use external drivers where required, and verify input thresholds and output timing at the 5 V operating condition. The programmed configuration should be archived with the adapter firmware for maintainability.

What is the ATF22V10CQ-15XI?
The ATF22V10CQ-15XI is a Microchip electrically erasable programmable logic device with 10 macrocells, approximately 500 gates, a 15 ns speed grade, and a 24-pin TSSOP package. According to the Microchip ATF22V10C(Q) datasheet, it uses CMOS electrically erasable Flash memory and operates from a 5 V supply, making it suitable for compact programmable control and interface logic.
What are the key specifications of ATF22V10CQ-15XI that engineers should know?
The ATF22V10CQ-15XI combines 10 macrocells, approximately 500 gates, 24 I/O positions, a 15 ns speed grade, and operation up to 83.3 MHz in a 24-TSSOP package. The manufacturer datasheet also identifies 5 V operation, CMOS construction, electrically erasable Flash configuration memory, and a typical low-power figure of 10 microamperes. These parameters define its suitability for small glue-logic and control systems.
Where can I download the ATF22V10CQ-15XI datasheet PDF?
The ATF22V10CQ-15XI datasheet PDF is available through the Microchip document link on this page, with the complete ATF22V10C(Q) family datasheet hosted at Microchip. The document covers the device architecture, package options, electrical characteristics, and programming information. Use the family document together with the exact ordering code, ATF22V10CQ-15XI, when confirming electrical limits and package details.
Where can I find the ATF22V10CQ-15XI pinout?
The ATF22V10CQ-15XI pin assignment is documented in the pin-description and package diagrams within the Microchip ATF22V10C(Q) datasheet. Because individual terminal names were not reproduced for this record, use the manufacturer pin table to map inputs, outputs, control signals, programming pins, power, and ground before laying out a PCB or assigning logic equations.
Is ATF22V10CQ-15XI suitable for industrial control logic?
The ATF22V10CQ-15XI is suitable when the system uses 5 V power and the required logic fits within 10 macrocells. Its 15 ns speed grade, 83.3 MHz operating frequency, and electrically erasable Flash configuration support deterministic control and reprogrammable equipment. Confirm the exact temperature range and industrial qualification status in the manufacturer documentation before deploying it in a regulated or high-temperature environment.
ATF22V10CQ-15XI vs ATF22V10CQ-15XC - which is better?
Both parts use the same 24-pin TSSOP package and the same 10-macrocell ATF22V10CQ architecture with a 15 ns speed grade. The distinction is the ordering-code grade, so temperature range and qualification should be checked in the Microchip datasheet. Choose the grade whose electrical limits match the industrial environment rather than assuming the X suffix identifies equivalent temperature coverage.
When should I choose ATF22V10CQ-15XI over ATF22V10CQ-10XC?
Choose ATF22V10CQ-15XI when a 15 ns device speed grade provides sufficient timing margin, while ATF22V10CQ-10XC offers a faster 10 ns grade for paths requiring more frequency or tighter setup and hold margins. Both use the same 24-TSSOP footprint and ATF22V10CQ architecture. The faster part is preferable only when the board timing actually requires it.
What is the best drop-in replacement for ATF22V10CQ-15XI?
ATF22V10CQ-15XC is the closest same-family drop-in candidate because it retains the 24-TSSOP package, 10-macrocell architecture, 5 V supply, and 15 ns speed grade. ATF22V10CQ-10XC and ATF22V10CQ-10XI are pin-compatible alternatives when a faster 10 ns grade is acceptable. Before replacement, verify temperature grade, timing constraints, programming compatibility, and the manufacturer pinout.
Can ATF22V10CQ-15XI replace an ATF22V10CQ with a different package?
The ATF22V10CQ-15XI should only replace a candidate housed in the same 24-pin TSSOP package. PLCC, SOIC, and other package options use different lead arrangements and may not have identical programming or control-pin assignments. A device with similar logic capacity and speed is not automatically a PCB drop-in replacement; footprint, pin names, power pins, and programming signals must all match.
What programming considerations apply to ATF22V10CQ-15XI?
The ATF22V10CQ-15XI stores its logic configuration in electrically erasable Flash memory and requires a compatible programmer, the correct device algorithm, and a valid JEDEC file or equivalent configuration format. Because Flash configurations can be erased and rewritten, engineers can update logic during prototyping. Always confirm programmer socket, package orientation, programming voltage, and security requirements against the Microchip programming documentation.
How much power does the ATF22V10CQ-15XI consume?
The ATF22V10CQ-15XI family is specified at power dissipation as low as 10 microamperes typical, according to the manufacturer datasheet. Actual board consumption also depends on the 5 V supply, selected speed grade, number of active macrocells, output loading, and switching activity. Use the datasheet operating-current conditions and the final logic configuration when performing a power-budget estimate.
What can replace ATF22V10CQ-15XI on the same PCB?
The ATF22V10CQ-15XC is a direct same-package replacement candidate with the same 10 macrocells, 500-gate-class architecture, 5 V supply, and 15 ns grade. ATF22V10CQ-10XC and ATF22V10CQ-10XI can also fit the 24-TSSOP footprint if their faster 10 ns timing is acceptable. Validate pin compatibility, programming support, and environmental qualification before approving a substitution.
Where can I buy ATF22V10CQ-15XI online?
Use the Request a Quote form on this page to request ATF22V10CQ-15XI availability, current lead time, and a quotation tailored to the required quantity and packaging. The 5 V, 10-macrocell, 24-TSSOP device is listed by authorized distribution channels, but stock and lead time can change. Provide your firmware and programming requirements when requesting the quotation.
What is the price of ATF22V10CQ-15XI?
The current unit price for ATF22V10CQ-15XI should be obtained through the Request a Quote form on this page. Pricing can vary with order quantity, packaging, programmed-device requirements, and market availability. The structured product record is designed to update commercial terms without embedding a stale price in technical guidance, so use the quote form for the actionable commercial response.
Is ATF22V10CQ-15XI in stock and what is its lead time?
Stock and lead time for ATF22V10CQ-15XI should be confirmed through the Request a Quote form on this page using the required quantity and delivery schedule. The part is offered as a 24-TSSOP, 5 V, 15 ns programmable logic device, but inventory status can change by package, programming condition, and regional supply. Submit the requested quantity and any programming or inspection requirements for a production-ready commitment.

Technische Referenzdaten für ATF22V10CQ-15XI – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the ATF22V10CQ-15XI for a 5 V, 24-TSSOP design requiring 10 macrocells, approximately 500 gates, a 15 ns speed grade, and electrically erasable Flash configuration. ATF22V10CQ-15XC is the closest functional alternative when its ordering-grade temperature and qualification specifications satisfy the application. Use ATF22V10CQ-10XC or ATF22V10CQ-10XI when the board requires a faster 10 ns timing margin and the programming, pinout, and environmental details are verified. ATF22V10CQ-20XC is appropriate when slower timing is acceptable and the same footprint and architecture are retained. For all alternatives, confirm the exact 24-TSSOP pin assignment, supply pins, programming signals, timing limits, and temperature grade. Parts in PLCC, SOIC, or other packages are not PCB drop-in choices even when their logic capacities and speed ratings are similar.

Vergleich mit Alternativen

Parameter Dieses Produkt ATF22V10CQ-15XC ATF22V10CQ-15XL ATF22V10CQ-10XC ATF22V10CQ-10XI ATF22V10CQ-20XC
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 24-TSSOP 24-TSSOP 24-TSSOP 24-TSSOP 24-TSSOP 24-TSSOP
Device Type Electrically erasable PLD Electrically erasable PLD Electrically erasable PLD Electrically erasable PLD Electrically erasable PLD Electrically erasable PLD
Macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells
Logic Capacity Approximately 500 gates Approximately 500 gates Approximately 500 gates Approximately 500 gates Approximately 500 gates Approximately 500 gates
Speed Grade 15 ns 15 ns 15 ns 10 ns 10 ns 20 ns
Operating Supply Voltage 5 V 5 V 5 V 5 V 5 V 5 V
Configuration Memory Electrically erasable Flash memory Electrically erasable Flash memory Electrically erasable Flash memory Electrically erasable Flash memory Electrically erasable Flash memory Electrically erasable Flash memory
I/O Count 24 I/O positions 24 I/O positions 24 I/O positions 24 I/O positions 24 I/O positions 24 I/O positions

Wichtigste Unterscheidungsmerkmale

  • Matches the 15 ns ATF22V10CQ performance grade (vs. ATF22V10CQ-10XC)
  • Provides a 10-macrocell, approximately 500-gate programmable architecture in a compact 24-TSSOP package (vs. ATF22V10CQ-15XC)
  • Offers the same 83.3 MHz family operating frequency as the 15 ns alternatives (vs. ATF22V10CQ-15XL)

Designhinweise

Use the manufacturer 24-TSSOP land pattern and verify pin 1 orientation against the PCB silkscreen and package marking. A drop-in software or MPN decision does not eliminate footprint checking: keep exposed pad, lead pitch, solder-mask, and paste geometry within assembly-house capability. Review every power, ground, input, output, and programming signal against the datasheet pin table before releasing artwork.

Estimate the 5 V rail budget from the selected ATF22V10CQ grade, enabled macrocell count, output loading, and switching activity rather than using the family's 10 microampere typical low-power figure alone. Provide local input and output decoupling according to the manufacturer layout guidance, maintain the required supply range, and include the PLD current plus programming-fixture and interface loads in the power design.

Do not treat equal macrocell count and speed as sufficient proof of interchangeability. Confirm that the alternative uses the same 24-TSSOP pinout, has compatible power and programming pins, satisfies the system's setup and hold timing, and is supported by the selected programmer. For the ATF22V10CQ-10XC and ATF22V10CQ-10XI alternatives, the 10 ns grade is faster than the 15 ns target and may change timing assumptions but should preserve the footprint.

Keep clock, reset, and high-fanout decode paths short, and avoid routing programming or control signals beside sensitive analog traces where practical. Preserve a clear ground-return path and place decoupling close to the device supply pins. Because the ATF22V10CQ-15XI can operate up to 83.3 MHz, use controlled impedance where timing-critical nets leave the device and follow the manufacturer's recommended input, output, and unused-pin treatment.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the exact ordering code. Confirm current declarations for the selected Microchip part.

Ähnliche Suchanfragen

ATF22V10CQ-15XI datasheet ATF22V10CQ-15XI datasheet pdf ATF22V10CQ-15XI pinout ATF22V10CQ-15XI equivalent ATF22V10CQ-15XI replacement ATF22V10CQ-15XI cross reference ATF22V10CQ-15XI footprint ATF22V10CQ-15XI programming ATF22V10CQ-15XI price ATF22V10CQ-15XI stock ATF22V10CQ-15XI vs ATF22V10CQ-15XC Microchip ATF22V10CQ-15XI ATF22V10CQ 24-TSSOP PLD ATF22V10CQ 15ns 500 gate ATF22V10CQ-15XI schematic

Verwandte Bauteile & Begriffe

Microchip Technology ATF22V10CQ-15XI ATF22V10CQ-15XC ATF22V10CQ-15XL ATF22V10CQ-10XC ATF22V10CQ-10XI ATF22V10CQ-20XC ATF22V10C ATF22V10CQ EEPLD SPLD programmable logic device electrically erasable Flash memory CMOS 24-TSSOP TSSOP package family surface-mount technology 10 macrocells 500 logic gates 15 ns speed grade 83.3 MHz 5 V supply address decoding interface control logic
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen