Microchip Technology

ATSAMD51N19A-AU - 120MHz Cortex-M4F MCU | Microchip

MPN: ATSAMD51N19A-AU ✓ Active
100-pin TQFP Package 120 MHz Speed 512 KB flash (512K x 8) Memory
MOQ: 1 |

ATSAMD51N19A-AU Overview

The Microchip Technology ATSAMD51N19A-AU is a 32-bit ARM Cortex-M4F microcontroller operating up to 120 MHz, with 512 KB of flash memory and a 100-pin TQFP package measuring 14 x 14 mm. It belongs to the SAM D51 series of general-purpose microcontrollers and combines a Cortex-M4 processor with a hardware floating-point unit for efficient control, signal-processing, and communications workloads.

A microcontroller is a programmable semiconductor device that integrates a processor core, memory, peripherals, and I/O into one component. The ATSAMD51N19A-AU therefore sits within the hierarchy of embedded controller, microcontroller, embedded processor, and semiconductor. Its 32-bit architecture and 120 MHz operating rate make it suitable for systems that need more computation than a basic 8-bit or 16-bit controller, while its integrated peripherals reduce the component count of an embedded design.

Key characteristics include a 512 KB flash configuration, a 14 x 14 mm TQFP-100 package, and operation at up to 120 MHz. The Cortex-M4F core includes an FPU, which accelerates floating-point operations in control loops, filtering, and sensor-processing software. The manufacturer describes the SAM D51 family as targeting general-purpose applications and using dual-panel flash with ECC across family configurations; the exact flash organization, RAM capacity, and ECC behavior for this ordering code must be confirmed from the device documentation.

The ATSAMD51N19A-AU is positioned for embedded industrial control, connected equipment, data acquisition, and human-machine-interface designs. Its package provides a large pin count for external peripherals, while the 120 MHz processor provides headroom for protocol handling and real-time control. Exact UART, SPI, I2C, ADC, DAC, USB, timer, and pin-multiplexing details should be selected from the manufacturer pin table rather than inferred from the family description.

A typical design would place the MCU beside power regulation, clock circuitry, communication transceivers, and sensors, followed by PCB-level validation of clock margins, signal integrity, decoupling, and exposed thermal behavior. Firmware configuration must also account for peripheral pin assignment, boot behavior, clock-tree settings, and the specific operating mode selected during design.

The most important replacement decision is pin compatibility rather than CPU similarity alone. ATSAMD51J19A-AU and ATSAMD51N20A-AU are same-package family candidates, while ATSAME51J19A-AU belongs to the closely related E51 family. Verify the exact peripheral set, flash density, RAM, pin multiplexing, and electrical characteristics before approving any substitution.

This page combines manufacturer-series information, distributor identification, package details, price evidence, same-package candidates, and engineering guidance to support faster component selection while keeping unresolved device-specific data explicitly visible.

Drop-in alternatives for ATSAMD51N19A-AU — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with ATSAMD51N19A-AU (same form factor and footprint) — differing in Package, Operating Temperature, ADC, DAC, MSL Level.

Microchip Technology
Package: 64-pin TQFP (10 x 10 mm)
Operating Temperature: -40 C to +85 C (industrial)
ADC: 12-bit, 1 MSPS
Compare with ATSAMD51N19A-AU →
Microchip Technology
Package: 100-pin TQFP (14x14 mm)
Operating Temperature: -40C to +125C (extended)
Compare with ATSAMD51N19A-AU →
Microchip Technology
Package: 100-pin TQFP (14x14 mm)
Operating Temperature: -40C to +85C (industrial)
ADC: 12-bit, up to 1 MSPS, up to 32 channels
Compare with ATSAMD51N19A-AU →
Microchip Technology
Package: 64-pin TQFP (10x10 mm)
Operating Temperature: -40 C to +85 C (industrial, AU)
ADC: 12-bit SAR, up to 1 Msps
Compare with ATSAMD51N19A-AU →

ATSAMD51J19A-AU

✅ Drop-In
Microchip Technology
📦 TQFP-100
ARM Cortex-M4F with FPU · 120 MHz · 512 KB (512K x 8) with ECC · 192 KB · 273 (estimated from 120 MHz) · 1.71 V to 3.63 V · -40 C to +85 C (industrial) · 64-pin TQFP (10 x 10 mm)

Contact for price

View Datasheet →

ATSAMD51N20A-AU

✅ Drop-In
Microchip Technology
📦 TQFP-100
ARM Cortex-M4F with FPU · 120 MHz · 1 MB (1M x 8) dual-panel with ECC · 256 KB with ECC · 1.71 V to 3.6 V · 12-bit, up to 1 MSPS, up to 32 channels · Dual 12-bit DAC · USB 2.0 Full-/High-Speed with on-chip PHY

Contact for price

View Datasheet →

ATSAME51J19A-AU

✅ Drop-In
Microchip Technology
📦 TQFP-100
ARM Cortex-M4F with FPU · 120 MHz · 512 KB (dual-panel, 512K x 8) · 1.71 V to 3.63 V · 64-pin TQFP (10x10 mm) · -40 C to +85 C (industrial, AU) · USB 2.0 Full-Speed Device/Host

Contact for price

View Datasheet →

ATSAMD51N19A-AU Maximum Ratings & Electrical Characteristics

Product Type 32-bit ARM Cortex-M4F microcontroller
Processor Core ARM Cortex-M4 with floating-point unit
Maximum CPU Frequency 120 MHz
Program Memory 512 KB flash (512K x 8)
Architecture 32-bit
Package 100-pin TQFP
Package Dimensions 14 x 14 mm
Mounting Type Surface mount
Application Target General-purpose embedded applications
Series SAM D51
RoHS Status unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

ATSAMD51N19A-AU 14 x 14 mm Pin Configuration Guide

Pin configuration for ATSAMD51N19A-AU (14 x 14 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

14 x 14 mm package pinout diagram for ATSAMD51N19A-AU

No detailed pinout data available for ATSAMD51N19A-AU.

Refer to the datasheet for full pin configuration.

Typical Applications

ATSAMD51N19A-AU is suitable for 6 applications: Industrial Control and Automation, Connected Sensor and IoT Equipment, Data Acquisition and Signal Processing, Human-Machine Interface Controller, Communications Gateway, Precision Timing and Motor Control.

🏭

Industrial Control and Automation

The ATSAMD51N19A-AU fits industrial control modules that coordinate sensors, actuators, and communications while requiring deterministic embedded performance. Its ARM Cortex-M4F processor operates up to 120 MHz, providing capacity for control loops, protocol handling, and floating-point calculations, while the 100-pin TQFP exposes a generous set of I/O options. The 512 KB flash supports a substantial embedded application, but developers should confirm SRAM availability, peripheral assignments, and clock-tree requirements from the device documentation. For a production design, validate operating voltage, temperature range, isolation boundaries, and EMC performance at the system level.

🧩

Connected Sensor and IoT Equipment

The ATSAMD51N19A-AU is appropriate for connected sensing equipment where a local controller must acquire data, apply filtering, and communicate through serial interfaces. The Cortex-M4F core reaches 120 MHz and includes a floating-point unit that accelerates common sensor-processing operations without requiring a separate numeric processor. Its 512 KB of program flash provides room for networking, diagnostics, and application firmware. Designers should allocate communication and debug pins through the official pin-muxing tables, then validate signal levels, clock stability, antenna coexistence, and low-power behavior in the finished enclosure.

📟

Data Acquisition and Signal Processing

The ATSAMD51N19A-AU can serve as the central processor in a data-acquisition system that combines analog inputs, digital sensors, and local data processing. The 120 MHz Cortex-M4F core provides useful throughput for filtering and control, and its hardware FPU improves efficiency in floating-point algorithms. The 512 KB flash configuration also allows meaningful local buffering and firmware integration. Exact ADC resolution, channel count, sampling behavior, and DAC availability must be confirmed for the ordering code. PCB design should prioritize stable references, clean analog grounding, appropriate filtering, and separation between sensitive acquisition paths and high-current switching nodes.

🖥️

Human-Machine Interface Controller

The ATSAMD51N19A-AU is well suited to a human-machine interface controller because it combines a 120 MHz processor with a 100-pin package that offers more peripheral connection options than compact microcontroller packages. It can manage display updates, input handling, status logic, and communication tasks within one embedded design. The floating-point unit benefits graphics calculations or filtered UI behavior, while 512 KB flash accommodates interface firmware. Before schematic capture, confirm the required display, storage, and touch-controller interfaces against the official peripheral and pin tables. Layout should include deliberate routing for high-speed display or memory interfaces and careful treatment of exposed board space around the TQFP.

🌐

Communications Gateway

The ATSAMD51N19A-AU can be used in a communications gateway that terminates one or more serial interfaces and manages protocol conversion, routing, or configuration. The 120 MHz Cortex-M4F core supplies enough instruction throughput for simultaneous protocol tasks, while the hardware floating-point unit can assist measurement and filtering functions. Its 512 KB flash provides space for stack configuration and field-update logic. Exact UART, SPI, I2C, USB, and Ethernet connectivity must be checked from the device documentation rather than assumed. Board-level validation should examine signal integrity, termination, isolation requirements, clock jitter, and grounding when the gateway interfaces with external equipment.

🔧

Precision Timing and Motor Control

The ATSAMD51N19A-AU can support precision timing, motion control, or equipment-control subsystems where computational headroom and a large pin count are useful. The Cortex-M4F core operates at 120 MHz and can execute control calculations with hardware floating-point support, while the 100-pin TQFP allows multiple timers, communications channels, and control signals to be assigned. Before selecting the device, verify timer resolution, complementary outputs, fault inputs, ADC triggering, and PWM characteristics in the exact device documentation. Firmware should include safe-state behavior and independent shutdown paths, while the PCB must provide controlled current paths, robust return connections, and protection against transient events.

What is the ATSAMD51N19A-AU?
The ATSAMD51N19A-AU is a Microchip Technology SAM D51 microcontroller built around a 32-bit ARM Cortex-M4F processor with a floating-point unit. It operates up to 120 MHz and includes 512 KB of flash memory in a 100-pin TQFP package measuring 14 x 14 mm. Microchip identifies the device as a general-purpose member of the SAM D51 family.
What is the maximum clock speed of ATSAMD51N19A-AU?
The ATSAMD51N19A-AU operates at up to 120 MHz. Its processor is an ARM Cortex-M4F core, which supports the 32-bit instruction set and includes a hardware floating-point unit. The 120 MHz rating makes the device suitable for real-time control, communications, and embedded signal-processing applications, although the achievable peripheral clocking must follow the device configuration and operating conditions.
How much flash memory does ATSAMD51N19A-AU have?
The ATSAMD51N19A-AU contains 512 KB of flash memory, organized as 512K x 8. Microchip describes the wider SAM D51 family as using dual-panel flash with ECC, but the exact panel organization and operational behavior for this ordering code must be confirmed in the device documentation before it is used in a safety- or reliability-critical design.
What package does ATSAMD51N19A-AU use?
The ATSAMD51N19A-AU uses a 100-pin TQFP surface-mount package measuring 14 x 14 mm. The package provides substantially more external connection options than a small QFN package, making it convenient for designs that need multiple communication, analog, or general-purpose I/O functions. PCB land patterns and pin assignments must follow the manufacturer package drawing.
Where can I download the ATSAMD51N19A-AU datasheet?
The ATSAMD51N19A-AU documentation is available through the Microchip product page linked on this page and through the datasheet index listed in the source records. Use the manufacturer documents for the authoritative pin table, electrical characteristics, memory map, clock requirements, and programming guidance. The 100-pin pinout should be assigned directly from the package-specific device documentation.
Where can I find the ATSAMD51N19A-AU pinout?
The ATSAMD51N19A-AU pinout is found in the package drawing and pin-description table for its 100-pin TQFP configuration. Public pinout references identify the package as TQFP-100, but a complete pin-by-pin assignment cannot be safely reconstructed from a search summary. Use the manufacturer pin table when assigning every power, ground, reset, debug, clock, analog, and communication signal.
Where to buy ATSAMD51N19A-AU online?
Use the Request a Quote form on this page to request ATSAMD51N19A-AU availability, packaging details, and a quotation for your required quantity. The form is the appropriate route for current commercial terms because availability and lead time can change without notice. Confirm that the quoted line item is the exact ATSAMD51N19A-AU ordering code.
What is the price of ATSAMD51N19A-AU?
The current ATSAMD51N19A-AU quotation is obtained through the Request a Quote form on this page. The product record contains a market reference point, but it is not a quantity-break quotation and should not be treated as the final transaction price. Submit the required quantity, package preference, and target delivery location for current pricing.
What is the lead time for ATSAMD51N19A-AU?
Request the current lead time through the Request a Quote form on this page. Lead time can vary with order quantity, manufacturing status, allocation, and shipment destination, so a general claim would not represent the purchaser's actual schedule. The manufacturer product page should be used to confirm lifecycle status before committing the project schedule.
Is ATSAMD51N19A-AU in stock?
Current ATSAMD51N19A-AU stock should be confirmed through the Request a Quote form on this page. The product is identified by Microchip as part of the active SAM D51 series, but device-level stock can differ by package, quantity, and date code. Provide the required quantity and delivery location to obtain an allocation response.
ATSAMD51N19A-AU vs ATSAMD51J19A-AU: which is better?
The ATSAMD51N19A-AU and ATSAMD51J19A-AU are closely related SAM D51 devices, but the correct choice depends on the exact flash, RAM, peripheral, and pin-multiplexing requirements of the design. The family comparison data does not provide enough numeric differences to recommend one unconditionally. Compare the complete ordering information and device tables before treating either part as a replacement.
ATSAMD51N19A-AU vs ATSAMD51N20A-AU: which is better?
ATSAMD51N19A-AU and ATSAMD51N20A-AU belong to the same SAM D51 family and use the same 100-pin TQFP package, making them relevant candidates for a board-level substitution review. The available comparison record does not state every numeric memory and peripheral difference. Select the part only after checking flash density, RAM, analog resources, communication features, and pin assignments.
What can replace ATSAMD51N19A-AU?
ATSAMD51J19A-AU and ATSAMD51N20A-AU are the principal same-package candidates identified for a replacement review. ATSAME51J19A-AU is a related same-package candidate from the SAM E51 family, while ATSAMD51N19A-AU-EFP is a packaging or ordering variant rather than a distinct functional upgrade. Firmware, peripherals, memory, and pin-multiplexing differences must be checked before replacement.
Is ATSAMD51N19A-AU the same as ATSAME51J19A-AU?
No. ATSAMD51N19A-AU belongs to the SAM D51 series, while ATSAME51J19A-AU belongs to the SAM E51 series. Although both are associated with a 100-pin package and the Cortex-M4F architecture, related architecture does not guarantee identical peripherals, memory, interrupt mapping, or board compatibility. Use the device-specific comparison tables for migration.
What are the key specifications of ATSAMD51N19A-AU?
The ATSAMD51N19A-AU combines a 32-bit ARM Cortex-M4F processor, a maximum operating frequency of 120 MHz, 512 KB of flash memory, and a 100-pin 14 x 14 mm TQFP package. Its floating-point unit is valuable for control and signal-processing workloads. The exact RAM size, voltage range, temperature limits, ADC configuration, and peripheral mix require confirmation from the manufacturer documentation.

Engineering reference data for ATSAMD51N19A-AU — comparison, design guidance, and compliance information.

Selection Guide

Choose ATSAMD51N19A-AU when a design specifically requires a Microchip SAM D51 device with an explicitly documented 512 KB flash configuration, a 120 MHz ARM Cortex-M4F processor, and a 100-pin 14 x 14 mm TQFP. Consider ATSAMD51J19A-AU when its device table provides a better match for the required memory or peripheral mix, but verify the substitution rather than assuming equivalence. ATSAMD51N20A-AU is another same-package SAM D51 candidate whose flash, RAM, and feature differences must be reviewed. ATSAME51J19A-AU can be considered when a broader SAM E51 migration is acceptable, but it is a different MCU family and may require firmware, peripheral, and board validation. For all candidates, confirm pin multiplexing, supply voltage, temperature range, clock limits, package drawing, lifecycle status, and software-device support before releasing the PCB or production firmware.

Comparison with Alternatives

Parameter This Product ATSAMD51J19A-AU ATSAMD51N20A-AU ATSAME51J19A-AU
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 100-pin TQFP, 14 x 14 mm 100-pin TQFP 100-pin TQFP 100-pin TQFP
Series SAM D51 SAM D51 SAM D51 SAM E51
Processor Core 32-bit ARM Cortex-M4F ARM Cortex-M4F ARM Cortex-M4F ARM Cortex-M4F
Maximum CPU Frequency 120 MHz 120 MHz 120 MHz 120 MHz
Floating-Point Unit Yes Yes Yes Yes

Key Differentiators

  • Directly identified 512 KB flash configuration (vs ATSAMD51J19A-AU)
  • Established 120 MHz Cortex-M4F configuration (vs ATSAMD51N20A-AU)
  • Large 100-pin package supports extensive peripheral assignment (vs ATSAME51J19A-AU)

Design Notes

Use the manufacturer land pattern for the 100-pin 14 x 14 mm TQFP and confirm pin 1 orientation against the package drawing. Place all decoupling capacitors close to their assigned supply pins, with a dedicated local return path for each capacitor. Avoid routing high-current or fast-switching signals beneath the MCU where practical, and preserve access to programming and debug interfaces for manufacturing and field service.

Follow the device power-supply requirements, including the required voltage rails, sequencing, and maximum supply limits, directly from the manufacturer documentation. Check the 120 MHz operating mode against the internal and external clock limits before finalizing oscillator and power-tree choices. Use separate filtering branches where a sensitive analog rail and a switching-supply output coexist, and test startup, brownout, and reset behavior across the full supply range.

Assign communication, debug, and high-speed pins through the official pin-muxing table rather than relying on a generic package diagram. When the design includes external memories or other high-speed interfaces, apply the manufacturer's impedance, topology, and routing guidance. Provide controlled return paths for clock lines and isolate analog inputs from switching-node copper wherever the board layout permits.

Do not approve ATSAMD51J19A-AU, ATSAMD51N20A-AU, or ATSAME51J19A-AU as a direct replacement solely because they use a 100-pin TQFP and a Cortex-M4F core. Compare the exact flash and SRAM capacities, clock tree, peripheral inventory, interrupt vectors, pin multiplexing, and board-level voltage requirements. Reuse of a package drawing does not guarantee that an existing PCB can operate correctly with a different family member.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for the exact ordering code. AEC-Q100 status is not applicable to the general-purpose industrial ATSAMD51N19A-AU ordering code.

Related Searches

atsamd51n19a aut ATSAMD51N19A-AU datasheet ATSAMD51N19A-AU pinout ATSAMD51N19A datasheet pdf ATSAMD51N19A TQFP-100 pinout ATSAMD51N19A equivalent ATSAMD51N19A replacement ATSAMD51N19A vs ATSAMD51J19A ATSAMD51N19A vs ATSAMD51N20A ATSAMD51N19A price ATSAMD51N19A stock Microchip ATSAMD51N19A-AU ATSAMD51N19A 120MHz Cortex-M4F ATSAMD51N19A industrial control MCU

Related Components & Terms

Microchip Technology ATSAMD51N19A-AU ATSAMD51N19A ATSAMD51J19A-AU ATSAMD51N20A-AU ATSAME51J19A-AU SAM D51 SAM E51 ARM Cortex-M4F 32-bit microcontroller embedded processor floating-point unit 512 KB flash 120 MHz TQFP-100 14 x 14 mm TQFP surface-mount package industrial control data acquisition IoT equipment human-machine interface communications gateway motor control general-purpose embedded applications
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details