ATSAMD51N19A-AU - 120MHz Cortex-M4F MCU | Microchip
MPN: ATSAMD51N19A-AU ✓ AktifATSAMD51N19A-AU Genel Bakış
A microcontroller is a programmable semiconductor device that integrates a processor core, memory, peripherals, and I/O into one component. The ATSAMD51N19A-AU therefore sits within the hierarchy of embedded controller, microcontroller, embedded processor, and semiconductor. Its 32-bit architecture and 120 MHz operating rate make it suitable for systems that need more computation than a basic 8-bit or 16-bit controller, while its integrated peripherals reduce the component count of an embedded design.
Key characteristics include a 512 KB flash configuration, a 14 x 14 mm TQFP-100 package, and operation at up to 120 MHz. The Cortex-M4F core includes an FPU, which accelerates floating-point operations in control loops, filtering, and sensor-processing software. The manufacturer describes the SAM D51 family as targeting general-purpose applications and using dual-panel flash with ECC across family configurations; the exact flash organization, RAM capacity, and ECC behavior for this ordering code must be confirmed from the device documentation.
The ATSAMD51N19A-AU is positioned for embedded industrial control, connected equipment, data acquisition, and human-machine-interface designs. Its package provides a large pin count for external peripherals, while the 120 MHz processor provides headroom for protocol handling and real-time control. Exact UART, SPI, I2C, ADC, DAC, USB, timer, and pin-multiplexing details should be selected from the manufacturer pin table rather than inferred from the family description.
A typical design would place the MCU beside power regulation, clock circuitry, communication transceivers, and sensors, followed by PCB-level validation of clock margins, signal integrity, decoupling, and exposed thermal behavior. Firmware configuration must also account for peripheral pin assignment, boot behavior, clock-tree settings, and the specific operating mode selected during design.
The most important replacement decision is pin compatibility rather than CPU similarity alone. ATSAMD51J19A-AU and ATSAMD51N20A-AU are same-package family candidates, while ATSAME51J19A-AU belongs to the closely related E51 family. Verify the exact peripheral set, flash density, RAM, pin multiplexing, and electrical characteristics before approving any substitution.
This page combines manufacturer-series information, distributor identification, package details, price evidence, same-package candidates, and engineering guidance to support faster component selection while keeping unresolved device-specific data explicitly visible.
Drop-in alternatifler için ATSAMD51N19A-AU — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller ATSAMD51N19A-AU (aynı form faktörü ve ayağa oturma) — farklı olan Package, Operating Temperature, ADC, DAC, MSL Level.
ATSAMD51J19A-AU
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ATSAMD51N20A-AU
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ATSAME51J19A-AU
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ATSAMD51N19A-AU Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | 32-bit ARM Cortex-M4F microcontroller |
| Processor Core | ARM Cortex-M4 with floating-point unit |
| Maximum CPU Frequency | 120 MHz |
| Program Memory | 512 KB flash (512K x 8) |
| Architecture | 32-bit |
| Paket | 100-pin TQFP |
| Package Dimensions | 14 x 14 mm |
| Montaj Türü | Surface mount |
| Application Target | General-purpose embedded applications |
| Series | SAM D51 |
| RoHS Durumu | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
ATSAMD51N19A-AU 14 x 14 mm Pin Yapısı Kılavuzu
ATSAMD51N19A-AU (14 x 14 mm paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: ATSAMD51N19A-AU.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
ATSAMD51N19A-AU için uygundur 6 uygulamas: Industrial Control and Automation, Connected Sensor and IoT Equipment, Data Acquisition and Signal Processing, Human-Machine Interface Controller, Communications Gateway, Precision Timing and Motor Control.
Industrial Control and Automation
The ATSAMD51N19A-AU fits industrial control modules that coordinate sensors, actuators, and communications while requiring deterministic embedded performance. Its ARM Cortex-M4F processor operates up to 120 MHz, providing capacity for control loops, protocol handling, and floating-point calculations, while the 100-pin TQFP exposes a generous set of I/O options. The 512 KB flash supports a substantial embedded application, but developers should confirm SRAM availability, peripheral assignments, and clock-tree requirements from the device documentation. For a production design, validate operating voltage, temperature range, isolation boundaries, and EMC performance at the system level.
Önerilen
Connected Sensor and IoT Equipment
The ATSAMD51N19A-AU is appropriate for connected sensing equipment where a local controller must acquire data, apply filtering, and communicate through serial interfaces. The Cortex-M4F core reaches 120 MHz and includes a floating-point unit that accelerates common sensor-processing operations without requiring a separate numeric processor. Its 512 KB of program flash provides room for networking, diagnostics, and application firmware. Designers should allocate communication and debug pins through the official pin-muxing tables, then validate signal levels, clock stability, antenna coexistence, and low-power behavior in the finished enclosure.
Önerilen
Data Acquisition and Signal Processing
The ATSAMD51N19A-AU can serve as the central processor in a data-acquisition system that combines analog inputs, digital sensors, and local data processing. The 120 MHz Cortex-M4F core provides useful throughput for filtering and control, and its hardware FPU improves efficiency in floating-point algorithms. The 512 KB flash configuration also allows meaningful local buffering and firmware integration. Exact ADC resolution, channel count, sampling behavior, and DAC availability must be confirmed for the ordering code. PCB design should prioritize stable references, clean analog grounding, appropriate filtering, and separation between sensitive acquisition paths and high-current switching nodes.
Önerilen
Human-Machine Interface Controller
The ATSAMD51N19A-AU is well suited to a human-machine interface controller because it combines a 120 MHz processor with a 100-pin package that offers more peripheral connection options than compact microcontroller packages. It can manage display updates, input handling, status logic, and communication tasks within one embedded design. The floating-point unit benefits graphics calculations or filtered UI behavior, while 512 KB flash accommodates interface firmware. Before schematic capture, confirm the required display, storage, and touch-controller interfaces against the official peripheral and pin tables. Layout should include deliberate routing for high-speed display or memory interfaces and careful treatment of exposed board space around the TQFP.
Önerilen
Communications Gateway
The ATSAMD51N19A-AU can be used in a communications gateway that terminates one or more serial interfaces and manages protocol conversion, routing, or configuration. The 120 MHz Cortex-M4F core supplies enough instruction throughput for simultaneous protocol tasks, while the hardware floating-point unit can assist measurement and filtering functions. Its 512 KB flash provides space for stack configuration and field-update logic. Exact UART, SPI, I2C, USB, and Ethernet connectivity must be checked from the device documentation rather than assumed. Board-level validation should examine signal integrity, termination, isolation requirements, clock jitter, and grounding when the gateway interfaces with external equipment.
Önerilen
Precision Timing and Motor Control
The ATSAMD51N19A-AU can support precision timing, motion control, or equipment-control subsystems where computational headroom and a large pin count are useful. The Cortex-M4F core operates at 120 MHz and can execute control calculations with hardware floating-point support, while the 100-pin TQFP allows multiple timers, communications channels, and control signals to be assigned. Before selecting the device, verify timer resolution, complementary outputs, fault inputs, ADC triggering, and PWM characteristics in the exact device documentation. Firmware should include safe-state behavior and independent shutdown paths, while the PCB must provide controlled current paths, robust return connections, and protection against transient events.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: ATSAMD51N19A-AU — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | ATSAMD51J19A-AU | ATSAMD51N20A-AU | ATSAME51J19A-AU |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-pin TQFP, 14 x 14 mm | 100-pin TQFP | 100-pin TQFP | 100-pin TQFP |
| Series | SAM D51 | SAM D51 | SAM D51 | SAM E51 |
| Processor Core | 32-bit ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F |
| Maximum CPU Frequency | 120 MHz | 120 MHz | 120 MHz | 120 MHz |
| Floating-Point Unit | Yes | Yes | Yes | Yes |
Ana Farklılayıcılar
- Directly identified 512 KB flash configuration (karşılaştırma:ATSAMD51J19A-AU)
- Established 120 MHz Cortex-M4F configuration (karşılaştırma:ATSAMD51N20A-AU)
- Large 100-pin package supports extensive peripheral assignment (karşılaştırma:ATSAME51J19A-AU)
Tasarım Notları
Use the manufacturer land pattern for the 100-pin 14 x 14 mm TQFP and confirm pin 1 orientation against the package drawing. Place all decoupling capacitors close to their assigned supply pins, with a dedicated local return path for each capacitor. Avoid routing high-current or fast-switching signals beneath the MCU where practical, and preserve access to programming and debug interfaces for manufacturing and field service.
Follow the device power-supply requirements, including the required voltage rails, sequencing, and maximum supply limits, directly from the manufacturer documentation. Check the 120 MHz operating mode against the internal and external clock limits before finalizing oscillator and power-tree choices. Use separate filtering branches where a sensitive analog rail and a switching-supply output coexist, and test startup, brownout, and reset behavior across the full supply range.
Assign communication, debug, and high-speed pins through the official pin-muxing table rather than relying on a generic package diagram. When the design includes external memories or other high-speed interfaces, apply the manufacturer's impedance, topology, and routing guidance. Provide controlled return paths for clock lines and isolate analog inputs from switching-node copper wherever the board layout permits.
Do not approve ATSAMD51J19A-AU, ATSAMD51N20A-AU, or ATSAME51J19A-AU as a direct replacement solely because they use a 100-pin TQFP and a Cortex-M4F core. Compare the exact flash and SRAM capacities, clock tree, peripheral inventory, interrupt vectors, pin multiplexing, and board-level voltage requirements. Reuse of a package drawing does not guarantee that an existing PCB can operate correctly with a different family member.
Uyumluluk Bilgisi
No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for the exact ordering code. AEC-Q100 status is not applicable to the general-purpose industrial ATSAMD51N19A-AU ordering code.