CY8C3246LTI-136 - 50MHz 64KB 8-Bit PSoC 3 MCU | Infineon
MPN: CY8C3246LTI-136 ✓ ActiveCY8C3246LTI-136 Overview
A PSoC, or programmable system-on-chip, combines an embedded microcontroller core with programmable analog and digital peripheral blocks on one integrated circuit. The CY8C32xx device family integrates CPU, Flash, SRAM, analog conversion, timers, serial interfaces, and programmable digital logic. This hierarchy places the device between a conventional 8-bit MCU and a more complex mixed-signal system-on-chip, allowing peripheral behavior to be configured in firmware rather than replicated with additional discrete components.
The CY8C3246LTI-136 provides 64 KB of Flash organized as 64K x 8 and operates at up to 50 MHz. Its 1.71 V to 5.5 V operating range supports both low-voltage portable systems and conventional 5 V industrial or consumer equipment. The 48-QFN package keeps the component compact, while the exposed pad provides a dedicated thermal and ground connection beneath the device.
The -136 ordering code identifies the highest listed performance grade within the CY8C3246 family. Combining a 50 MHz processor with programmable analog and digital blocks makes the part useful for sensor conditioning, control loops, communications gateways, and compact human-machine interfaces. Its 8051-based architecture retains a straightforward instruction set while adding configurable peripheral routing that can reduce external component count.
Typical applications include industrial condition monitoring, building-control nodes, low-cost data loggers, USB-connected peripheral controllers, and embedded instrumentation. The wide supply range is particularly useful in systems that combine a 3.3 V digital domain with lower-voltage analog circuitry. Firmware can configure the on-chip analog blocks, counters, timers, and serial interfaces for a specific board configuration.
PCB design should treat the exposed pad as a thermal and electrical connection rather than an unused package feature. Connect it to the ground plane with multiple short thermal-via paths and follow the manufacturer pin-definition and land-pattern tables when assigning signals. Confirm the device configuration, clock source, and peripheral routing in PSoC Creator before releasing the PCB and firmware.
This page consolidates the distributor specification, ordering information, package details, power-range data, drop-in family comparisons, and practical integration guidance into a single engineering reference. It also identifies which additional specifications require confirmation in the manufacturer datasheet before a new design is released.
Drop-in alternatives for CY8C3246LTI-136 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
CY8C3246LTI-133
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
CY8C3246LTI-130
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
CY8C3245LTI-136
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
CY8C3246LTI-136 Maximum Ratings & Electrical Characteristics
| Product Type | 8-bit programmable system-on-chip (PSoC 3) microcontroller |
| Manufacturer | Infineon Technologies |
| Product Family | CY8C32xx |
| CPU Architecture | 8051-compatible 8-bit core |
| Maximum Operating Frequency | 50 MHz |
| Flash Memory | 64 KB (64K x 8) |
| Operating Voltage Range | 1.71 V to 5.5 V |
| Package Type | 48-QFN (7 x 7 mm) |
| Package Body Size | 7 mm x 7 mm |
| Thermal Pad | Exposed pad |
| Mounting Type | Surface mount |
| Device Category | Embedded microcontroller |
| Programmable Peripheral Architecture | PSoC 3 programmable analog and digital system-on-chip |
| Data Bus Organization | 8-bit (64K x 8 Flash organization) |
CY8C3246LTI-136 7 mm x 7 mm Pin Configuration Guide
Pin configuration for CY8C3246LTI-136 (7 mm x 7 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for CY8C3246LTI-136.
Refer to the datasheet for full pin configuration.
Typical Applications
CY8C3246LTI-136 is suitable for 6 applications: Industrial Condition Monitoring, Building Control and HVAC Nodes, Compact Data Loggers, USB and Serial Peripheral Controllers, Embedded Instrumentation and Control, Low-Voltage Portable Devices.
Industrial Condition Monitoring
The CY8C3246LTI-136 fits condition-monitoring nodes that sample sensors, filter signals, and report results over a serial link. Its PSoC 3 architecture places programmable analog blocks, an 8-bit 8051-compatible core, and digital peripherals in one device, which can reduce the need for separate analog and interface ICs. The 50 MHz rating supports scheduling of acquisition, filtering, and protocol tasks, while the 1.71 V to 5.5 V range covers 3.3 V industrial electronics. Design the analog front end for the sensor signal, validate gain and converter settings in the configuration tool, and reserve the exposed pad for a low-impedance thermal and ground connection.
Recommended
Building Control and HVAC Nodes
The CY8C3246LTI-136 is suitable for distributed building-control nodes that read temperature, humidity, occupancy, and actuator feedback. Programmable analog and digital blocks allow input conditioning, filtering, threshold detection, and debouncing to be implemented in configurable peripheral logic, reducing discrete overhead. A 50 MHz 8051-compatible core has ample capacity for protocol handling and local logic, and the 1.71 V to 5.5 V operating range supports both 3.3 V controller electronics and lower-voltage sensor interfaces. Confirm the selected peripheral routing and ADC reference in PSoC Creator, then isolate sensitive analog inputs appropriately on the PCB.
Recommended
Compact Data Loggers
The CY8C3246LTI-136 can serve as the acquisition controller in a compact data logger that records sensor values, timestamps events, and transfers records through a serial interface. Its 64 KB of 64K x 8 Flash provides room for application code, configuration data, and logging structures, while the 50 MHz core handles periodic sampling and buffer management. Programmable counters and timers improve timing consistency for multi-channel acquisition. When sizing storage, reserve space for wear management and page-level programming constraints. Use a large exposed-pad thermal path and keep high-current switching or radio sections physically separated from precision analog inputs.
Recommended
USB and Serial Peripheral Controllers
The CY8C3246LTI-136 is well suited to legacy peripheral-control tasks involving configuration ports, status LEDs, buttons, and serial links. The 8051-compatible core and 50 MHz clock provide sufficient throughput for interrupt-driven communication and protocol translation, while programmable digital blocks can implement timers, counters, and routing without excessive firmware overhead. The 48-QFN 7 x 7 mm package supports compact peripheral-controller boards. Confirm every connector-level signal against the manufacturer pin table and validate high-speed routing, grounding, and protection components according to the applicable interface standard.
Recommended
Embedded Instrumentation and Control
The CY8C3246LTI-136 works well in compact instrumentation that combines measurement, digital filtering, and actuator control. Its PSoC 3 integration allows analog conversion, programmable filters, timing blocks, and digital interfaces to share a device, potentially simplifying the analog signal chain. The 50 MHz operating rate gives deterministic headroom for control loops, and the 1.71 V to 5.5 V range accommodates multiple logic levels within one design. Establish analog reference and gain budgets in the configuration tool, use short analog traces, and place the exposed pad over an uninterrupted ground-and-via structure for consistent thermal performance.
Recommended
Low-Voltage Portable Devices
The CY8C3246LTI-136 is applicable to compact portable products that require sensor acquisition, local processing, and low-voltage operation. Its listed 1.71 V to 5.5 V range allows design work at reduced supply levels when energy is important, and the PSoC peripheral blocks can replace several discrete interface components. The 50 MHz processor supports responsive control without requiring a larger package. Battery designs still require evaluation of sleep-mode current, analog settling behavior, and Flash write energy. Use the exposed pad as specified in the package drawing, preserve quiet analog grounding, and validate the complete power-sequencing plan in hardware.
Recommended
Recommended Products Summary
Engineering reference data for CY8C3246LTI-136 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | CY8C3246LTI-133 | CY8C3246LTI-130 | CY8C3245LTI-136 |
|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | 48-QFN (7x7) with exposed pad | 48-QFN (7x7) with exposed pad | 48-QFN (7x7) with exposed pad | 48-QFN (7x7) with exposed pad |
| Maximum CPU Frequency | 50 MHz | 33 MHz | 24 MHz | 50 MHz |
| Flash Memory | 64 KB (64K x 8) | 64 KB | 64 KB | 48 KB |
| CPU Architecture | 8051-compatible 8-bit core | 8051-compatible 8-bit core | 8051-compatible 8-bit core | 8051-compatible 8-bit core |
| Product Family | PSoC 3 CY8C32xx | PSoC 3 CY8C32xx | PSoC 3 CY8C32xx | PSoC 3 CY8C32xx |
Key Differentiators
- Highest listed CPU speed among the compared CY8C324x alternatives (vs CY8C3246LTI-133)
- Largest Flash configuration among the compared package-family alternatives (vs CY8C3245LTI-136)
- More processing headroom for timing-sensitive control and acquisition (vs CY8C3246LTI-130)
Design Notes
Treat the 48-QFN exposed pad as a required thermal and ground connection. Place the pad over a solid ground region and add multiple short thermal vias into the inner and opposite copper layers. At 50 MHz, switching losses and regulator dissipation both contribute to junction temperature, so estimate the worst-case ambient temperature, core activity, and peripheral loading before finalizing the copper area. Use the manufacturer thermal data for the final junction-temperature calculation.
Separate analog inputs from high-current digital and switching paths on the PCB. Route precision signals over a continuous reference plane, keep the analog ground connection to the exposed pad low impedance, and place configured analog blocks close to their external sensors or conditioning networks. Verify the 48-QFN land pattern, paste aperture, mask openings, and exposed-pad geometry against the manufacturer package drawing rather than relying on a generic QFN footprint.
Do not assume that a lower-speed or lower-Flash family member is firmware-compatible without a timing and memory review. The 33 MHz and 24 MHz alternatives reduce available CPU headroom, which can alter interrupt latency, sampling periods, and communication deadlines. The 48 KB Flash alternative has 25% less program storage than the 64 KB device. Rebenchmark critical routines and check the linker memory map after any substitution.
Compliance Information
The manufacturer product information confirms the device identity, package, Flash configuration, frequency, and supply range, but it does not provide explicit compliance declarations. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 status in the current manufacturer product documentation before qualification.