Infineon

CY8C3246LTI-136 - 50MHz 64KB 8-Bit PSoC 3 MCU | Infineon

MPN: CY8C3246LTI-136 ✓ Hoạt động
1.71 V to 5.5 V Vdss 48-QFN (7 x 7 mm) Package 50 MHz Speed 64 KB (64K x 8) Memory
MOQ: 1 |

CY8C3246LTI-136 Tóm tắt

The Infineon CY8C3246LTI-136 is an 8-bit 8051-compatible PSoC 3 programmable system-on-chip with a 50 MHz operating frequency, 64 KB of Flash memory, and a 48-QFN 7 x 7 mm package with an exposed pad. It operates across a 1.71 V to 5.5 V supply range, making it suitable for compact embedded control, sensing, and communications designs.

A PSoC, or programmable system-on-chip, combines an embedded microcontroller core with programmable analog and digital peripheral blocks on one integrated circuit. The CY8C32xx device family integrates CPU, Flash, SRAM, analog conversion, timers, serial interfaces, and programmable digital logic. This hierarchy places the device between a conventional 8-bit MCU and a more complex mixed-signal system-on-chip, allowing peripheral behavior to be configured in firmware rather than replicated with additional discrete components.

The CY8C3246LTI-136 provides 64 KB of Flash organized as 64K x 8 and operates at up to 50 MHz. Its 1.71 V to 5.5 V operating range supports both low-voltage portable systems and conventional 5 V industrial or consumer equipment. The 48-QFN package keeps the component compact, while the exposed pad provides a dedicated thermal and ground connection beneath the device.

The -136 ordering code identifies the highest listed performance grade within the CY8C3246 family. Combining a 50 MHz processor with programmable analog and digital blocks makes the part useful for sensor conditioning, control loops, communications gateways, and compact human-machine interfaces. Its 8051-based architecture retains a straightforward instruction set while adding configurable peripheral routing that can reduce external component count.

Typical applications include industrial condition monitoring, building-control nodes, low-cost data loggers, USB-connected peripheral controllers, and embedded instrumentation. The wide supply range is particularly useful in systems that combine a 3.3 V digital domain with lower-voltage analog circuitry. Firmware can configure the on-chip analog blocks, counters, timers, and serial interfaces for a specific board configuration.

PCB design should treat the exposed pad as a thermal and electrical connection rather than an unused package feature. Connect it to the ground plane with multiple short thermal-via paths and follow the manufacturer pin-definition and land-pattern tables when assigning signals. Confirm the device configuration, clock source, and peripheral routing in PSoC Creator before releasing the PCB and firmware.

This page consolidates the distributor specification, ordering information, package details, power-range data, drop-in family comparisons, and practical integration guidance into a single engineering reference. It also identifies which additional specifications require confirmation in the manufacturer datasheet before a new design is released.

Bộ thay thế dễ dàng lắp đặt cho CY8C3246LTI-136 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

CY8C3246LTI-133

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 48-QFN (7x7)
Same 48-QFN footprint and 64 KB Flash, but maximum CPU frequency is 33 MHz versus 50 MHz (-34%)

📋 Tham chiếu thay thế (không có trong danh mục)

CY8C3246LTI-130

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 48-QFN (7x7)
Same 48-QFN footprint and 64 KB Flash, but maximum CPU frequency is 24 MHz versus 50 MHz (-52%)

📋 Tham chiếu thay thế (không có trong danh mục)

CY8C3245LTI-136

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 48-QFN (7x7)
Same 50 MHz rating and 48-QFN footprint, but Flash is 48 KB versus 64 KB (-25%)

📋 Tham chiếu thay thế (không có trong danh mục)

CY8C3246LTI-136 Tỷ lệ tối đa & tính chất điện

Product Type 8-bit programmable system-on-chip (PSoC 3) microcontroller
Manufacturer Infineon Technologies
Product Family CY8C32xx
CPU Architecture 8051-compatible 8-bit core
Maximum Operating Frequency 50 MHz
Flash Memory 64 KB (64K x 8)
Operating Voltage Range 1.71 V to 5.5 V
Package Type 48-QFN (7 x 7 mm)
Package Body Size 7 mm x 7 mm
Thermal Pad Exposed pad
Kiểu lắp đặt Surface mount
Device Category Embedded microcontroller
Programmable Peripheral Architecture PSoC 3 programmable analog and digital system-on-chip
Data Bus Organization 8-bit (64K x 8 Flash organization)

Hướng dẫn cấu hình chân CY8C3246LTI-136 7 mm x 7 mm

Cấu hình chân cho CY8C3246LTI-136 (7 mm x 7 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 7 mm x 7 mm cho CY8C3246LTI-136

Không có dữ liệu chân cụ thể sẵn có cho CY8C3246LTI-136.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

CY8C3246LTI-136 phù hợp cho 6 Áp dụngs: Industrial Condition Monitoring, Building Control and HVAC Nodes, Compact Data Loggers, USB and Serial Peripheral Controllers, Embedded Instrumentation and Control, Low-Voltage Portable Devices.

🏭

Industrial Condition Monitoring

The CY8C3246LTI-136 fits condition-monitoring nodes that sample sensors, filter signals, and report results over a serial link. Its PSoC 3 architecture places programmable analog blocks, an 8-bit 8051-compatible core, and digital peripherals in one device, which can reduce the need for separate analog and interface ICs. The 50 MHz rating supports scheduling of acquisition, filtering, and protocol tasks, while the 1.71 V to 5.5 V range covers 3.3 V industrial electronics. Design the analog front end for the sensor signal, validate gain and converter settings in the configuration tool, and reserve the exposed pad for a low-impedance thermal and ground connection.

🏠

Building Control and HVAC Nodes

The CY8C3246LTI-136 is suitable for distributed building-control nodes that read temperature, humidity, occupancy, and actuator feedback. Programmable analog and digital blocks allow input conditioning, filtering, threshold detection, and debouncing to be implemented in configurable peripheral logic, reducing discrete overhead. A 50 MHz 8051-compatible core has ample capacity for protocol handling and local logic, and the 1.71 V to 5.5 V operating range supports both 3.3 V controller electronics and lower-voltage sensor interfaces. Confirm the selected peripheral routing and ADC reference in PSoC Creator, then isolate sensitive analog inputs appropriately on the PCB.

📟

Compact Data Loggers

The CY8C3246LTI-136 can serve as the acquisition controller in a compact data logger that records sensor values, timestamps events, and transfers records through a serial interface. Its 64 KB of 64K x 8 Flash provides room for application code, configuration data, and logging structures, while the 50 MHz core handles periodic sampling and buffer management. Programmable counters and timers improve timing consistency for multi-channel acquisition. When sizing storage, reserve space for wear management and page-level programming constraints. Use a large exposed-pad thermal path and keep high-current switching or radio sections physically separated from precision analog inputs.

🔌

USB and Serial Peripheral Controllers

The CY8C3246LTI-136 is well suited to legacy peripheral-control tasks involving configuration ports, status LEDs, buttons, and serial links. The 8051-compatible core and 50 MHz clock provide sufficient throughput for interrupt-driven communication and protocol translation, while programmable digital blocks can implement timers, counters, and routing without excessive firmware overhead. The 48-QFN 7 x 7 mm package supports compact peripheral-controller boards. Confirm every connector-level signal against the manufacturer pin table and validate high-speed routing, grounding, and protection components according to the applicable interface standard.

🔬

Embedded Instrumentation and Control

The CY8C3246LTI-136 works well in compact instrumentation that combines measurement, digital filtering, and actuator control. Its PSoC 3 integration allows analog conversion, programmable filters, timing blocks, and digital interfaces to share a device, potentially simplifying the analog signal chain. The 50 MHz operating rate gives deterministic headroom for control loops, and the 1.71 V to 5.5 V range accommodates multiple logic levels within one design. Establish analog reference and gain budgets in the configuration tool, use short analog traces, and place the exposed pad over an uninterrupted ground-and-via structure for consistent thermal performance.

🔋

Low-Voltage Portable Devices

The CY8C3246LTI-136 is applicable to compact portable products that require sensor acquisition, local processing, and low-voltage operation. Its listed 1.71 V to 5.5 V range allows design work at reduced supply levels when energy is important, and the PSoC peripheral blocks can replace several discrete interface components. The 50 MHz processor supports responsive control without requiring a larger package. Battery designs still require evaluation of sleep-mode current, analog settling behavior, and Flash write energy. Use the exposed pad as specified in the package drawing, preserve quiet analog grounding, and validate the complete power-sequencing plan in hardware.

Tóm tắt các sản phẩm được đề xuất

CY8C3246LTI-133 Lower-speed package-compatible option for monitoring nodes with lighter processing loads Được sử dụng trong: Industrial Condition Monitoring, Compact Data Loggers, Embedded Instrumentation and Control CY8C3246LTI-130 Lower-power grade candidate for duty-cycled monitoring equipment Được sử dụng trong: Industrial Condition Monitoring, USB and Serial Peripheral Controllers, Low-Voltage Portable Devices CY8C3246LTI-136 Infineon Được sử dụng trong: Building Control and HVAC Nodes, USB and Serial Peripheral Controllers, Embedded Instrumentation and Control CY8C3245LTI-136 Lower-Flash package-compatible alternative for simpler node firmware Được sử dụng trong: Building Control and HVAC Nodes, Compact Data Loggers, Low-Voltage Portable Devices
What is the CY8C3246LTI-136?
The CY8C3246LTI-136 is an Infineon PSoC 3 programmable system-on-chip with an 8051-compatible 8-bit core, 64 KB of Flash, a maximum operating frequency of 50 MHz, and a 48-QFN 7 x 7 mm package. Infineon distributor listings identify it as a CY8C32xx-family device operating from 1.71 V to 5.5 V.
What are the key specifications of CY8C3246LTI-136 that engineers should know?
The CY8C3246LTI-136 combines a 50 MHz 8051-compatible processor, 64 KB of 64K x 8 Flash, and a 1.71 V to 5.5 V operating range in a 48-QFN package with an exposed pad. Its PSoC 3 architecture integrates programmable analog and digital peripheral blocks around the CPU, allowing functions such as conversion, timing, and signal routing to be configured in firmware.
What is the operating voltage of CY8C3246LTI-136?
The CY8C3246LTI-136 operates from 1.71 V to 5.5 V according to the manufacturer product information listed by authorized distributors. This range supports both low-voltage embedded products and conventional 5 V systems. Confirm individual analog and digital rail requirements against the manufacturer datasheet before assigning peripheral supply pins.
How much Flash memory does the CY8C3246LTI-136 contain?
The CY8C3246LTI-136 contains 64 KB of Flash memory organized as 64K x 8. Infineon distributor records identify the same device as a CY8C32xx 8-bit microcontroller with 64 KB of Flash. The -136 grade is associated with a maximum CPU operating frequency of 50 MHz.
What package does the CY8C3246LTI-136 use?
The CY8C3246LTI-136 is offered in a 48-QFN surface-mount package measuring 7 x 7 mm and incorporating an exposed pad. The exposed pad is not a spare signal pin; it is used for thermal dissipation and the package ground connection. Use the manufacturer land-pattern drawing when defining solder-mask and paste apertures.
Where can I download the CY8C3246LTI-136 datasheet PDF?
The CY8C3246LTI-136 datasheet PDF is available from the datasheet link listed on this page, and the manufacturer product documentation is the authoritative source for register definitions, electrical limits, and the complete pin table. Use the pin-description and ordering-information sections to confirm every signal assignment before placing the PCB order.
Where can I find the CY8C3246LTI-136 pinout?
The complete CY8C3246LTI-136 pinout is defined by the 48-QFN pin-description table in the manufacturer datasheet, including the exposed-pad connection. Assign PCB tracks directly from that table rather than inferring signals from package position. Check the package drawing as well because a 48-QFN land pattern includes more than the externally visible lead count.
What can replace the CY8C3246LTI-136?
The closest drop-in choices are lower-speed or lower-Flash members of the same CY8C324x package family, provided the PCB land pattern and firmware peripherals match. The CY8C3246LTI-133 and CY8C3246LTI-130 retain 64 KB of Flash but operate below the 50 MHz rate of the CY8C3246LTI-136. Firmware timing and flash-dependent functionality must be reviewed before substitution.
Is the CY8C3246LTI-136 pin compatible with the CY8C3246LTI-133?
The CY8C3246LTI-133 uses the same 48-QFN package and 64 KB Flash configuration as the CY8C3246LTI-136, making it a pin-compatible family alternative. The principal difference is the maximum operating speed of 33 MHz versus 50 MHz, a 34% reduction that is outside the tightest drop-in match. Confirm timing-sensitive routines and startup behavior after substitution.
When should I choose CY8C3246LTI-136 over a lower-speed CY8C3246 variant?
Choose the CY8C3246LTI-136 when processing throughput or timing-sensitive control loops require the 50 MHz grade. A 33 MHz or 24 MHz family variant can serve designs whose firmware budget is comfortably met at the lower clock rate and can simplify supply-noise or thermal margins. The selected grade should follow worst-case workload analysis rather than average code execution time.
Is the CY8C3246LTI-136 suitable for battery-powered and industrial applications?
The CY8C3246LTI-136 suits both battery-powered and industrial designs because its listed operating range is 1.71 V to 5.5 V and it offers a 50 MHz processing rate in a compact 48-QFN package. For battery systems, evaluate the sleep-mode current and analog accuracy from the manufacturer datasheet. Industrial systems should verify temperature range, qualification, and EMC requirements.
What is the best Infineon equivalent for the CY8C3246LTI-136?
The best same-family equivalent depends on which constraint can be relaxed: the CY8C3246LTI-133 retains 64 KB of Flash and the same package while reducing maximum speed to 33 MHz, while the CY8C3246LTI-130 also retains 64 KB of Flash at a lower speed grade. No cross-manufacturer drop-in part is established by the available cross-reference information, so firmware and PCB changes should not be assumed.
How much does the CY8C3246LTI-136 cost?
The CY8C3246LTI-136 is supplied under a quote-based purchasing model on this page. Use the Request a Quote form to request the current unit price, volume tiers, and availability for your exact package suffix and quantity. The form also allows buyers to request current lead-time information without relying on a static online price.
What is the lead time for CY8C3246LTI-136?
The current production and delivery lead time for the CY8C3246LTI-136 should be confirmed at the time of order through the Request a Quote form on this page. Submit the required quantity, target date, and shipment destination so the quote can reflect current allocation and logistics conditions.
Is the CY8C3246LTI-136 in stock and available to order?
Infineon distributor listings for the CY8C3246LTI-136 indicate that the device is orderable, but stock levels change continuously and vary by quantity and shipment destination. Use the Request a Quote form on this page to obtain a current availability confirmation and an orderable quotation for the exact 48-QFN ordering code.

Dữ liệu tham khảo kỹ thuật cho CY8C3246LTI-136 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Select the CY8C3246LTI-136 when the design needs the full 50 MHz PSoC 3 performance grade and can use all 64 KB of Flash without qualification or timing concerns. Choose the CY8C3246LTI-133 when the same 64 KB memory and package are required but firmware profiling shows that 33 MHz is sufficient; review every deadline and sampling interval. The CY8C3246LTI-130 is appropriate for slower, duty-cycled nodes where 24 MHz still meets the control and communications requirements. Use the CY8C3245LTI-136 when 48 KB of Flash is sufficient and the priority is identical 50 MHz processing rather than maximum storage. All three alternatives are Infineon family members sharing the 48-QFN package, so no cross-manufacturer substitution is assumed. Final selection must also confirm temperature grade, qualification, supply configuration, peripheral availability, and the manufacturer pin table.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này CY8C3246LTI-133 CY8C3246LTI-130 CY8C3245LTI-136
Brand Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies
Package 48-QFN (7x7) with exposed pad 48-QFN (7x7) with exposed pad 48-QFN (7x7) with exposed pad 48-QFN (7x7) with exposed pad
Maximum CPU Frequency 50 MHz 33 MHz 24 MHz 50 MHz
Flash Memory 64 KB (64K x 8) 64 KB 64 KB 48 KB
CPU Architecture 8051-compatible 8-bit core 8051-compatible 8-bit core 8051-compatible 8-bit core 8051-compatible 8-bit core
Product Family PSoC 3 CY8C32xx PSoC 3 CY8C32xx PSoC 3 CY8C32xx PSoC 3 CY8C32xx

Bảo phân biệt quan trọng

  • Highest listed CPU speed among the compared CY8C324x alternatives (vsCY8C3246LTI-133)
  • Largest Flash configuration among the compared package-family alternatives (vsCY8C3245LTI-136)
  • More processing headroom for timing-sensitive control and acquisition (vsCY8C3246LTI-130)

Ghi chú thiết kế

Treat the 48-QFN exposed pad as a required thermal and ground connection. Place the pad over a solid ground region and add multiple short thermal vias into the inner and opposite copper layers. At 50 MHz, switching losses and regulator dissipation both contribute to junction temperature, so estimate the worst-case ambient temperature, core activity, and peripheral loading before finalizing the copper area. Use the manufacturer thermal data for the final junction-temperature calculation.

Separate analog inputs from high-current digital and switching paths on the PCB. Route precision signals over a continuous reference plane, keep the analog ground connection to the exposed pad low impedance, and place configured analog blocks close to their external sensors or conditioning networks. Verify the 48-QFN land pattern, paste aperture, mask openings, and exposed-pad geometry against the manufacturer package drawing rather than relying on a generic QFN footprint.

Do not assume that a lower-speed or lower-Flash family member is firmware-compatible without a timing and memory review. The 33 MHz and 24 MHz alternatives reduce available CPU headroom, which can alter interrupt latency, sampling periods, and communication deadlines. The 48 KB Flash alternative has 25% less program storage than the 64 KB device. Rebenchmark critical routines and check the linker memory map after any substitution.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The manufacturer product information confirms the device identity, package, Flash configuration, frequency, and supply range, but it does not provide explicit compliance declarations. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 status in the current manufacturer product documentation before qualification.

Dữ liệu được xác minh vào: 2026-11-15 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

CY8C3246LTI-136 CY8C3246LTI-136 datasheet CY8C3246LTI-136 datasheet pdf CY8C3246LTI-136 pinout CY8C3246LTI-136 48-QFN Infineon CY8C3246LTI-136 CY8C3246LTI-136 50MHz 64KB CY8C3246LTI-136 price CY8C3246LTI-136 stock CY8C3246LTI-136 equivalent CY8C3246LTI-136 replacement CY8C3246LTI-136 vs CY8C3246LTI-133 CY8C3246 PSoC 3 application circuit CY8C3246LTI-136 footprint what is CY8C3246LTI-136

Các bộ phận và thuật ngữ liên quan

Infineon Technologies CY8C3246LTI-136 CY8C3246LTI-133 CY8C3246LTI-130 CY8C3245LTI-136 PSoC 3 CY8C32xx 8051-compatible microcontroller 8-bit microcontroller programmable system-on-chip mixed-signal microcontroller embedded microcontroller 64 KB Flash 50 MHz 1.71 V to 5.5 V 48-QFN package QFN family surface-mount package exposed pad programmable analog blocks programmable digital blocks sensor conditioning industrial control mixed-signal system-on-chip
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ