EFM32TG232F32-D-QFP64 - 32MHz Cortex-M3 MCU | Silicon Labs
MPN: EFM32TG232F32-D-QFP64 ✓ ActiveEFM32TG232F32-D-QFP64 Overview
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. The EFM32TG232F32-D-QFP64 belongs to the Tiny Gecko family, a low-power platform positioned between general-purpose embedded processors and highly integrated system-on-chip devices. Its autonomous peripherals, energy-saving modes, and fast wake-up behavior are intended to reduce active processing time in battery-operated products.
Key features include a 32-bit Cortex-M3 processor, 32 KB Flash for firmware, 4 KB SRAM for working memory, and two 16-bit timers. The device consumes as little as 0.6 µA in Stop mode according to the manufacturer EFM32TG data sheet, while its Run-mode consumption is listed as 150 µA per MHz. This combination supports duty-cycled designs in which the controller remains asleep between measurements or control events.
The architecture combines the Cortex-M3 processing core with autonomous peripherals that can perform selected tasks while the processor sleeps. This division of work can shorten active-mode duration and reduce overall energy consumption in sensor nodes, compact industrial controllers, and wearable products. The 53 digital I/O pins provide substantial connectivity for sensors, indicators, communications, and discrete control signals without requiring a larger package.
Typical applications include energy-harvesting sensor nodes, connected industrial equipment, building-control endpoints, portable medical accessories, and compact consumer devices. The part is especially appropriate when a design needs deterministic embedded control, low Stop-mode consumption, and a large pin count while retaining a familiar 3.3 V-compatible architecture. Firmware development uses the EFM32 family software and debugging environment.
When assigning PCB connections, use the manufacturer pin-description table to map all 64 package positions and identify power, ground, reset, clock, programming, and peripheral functions. Decoupling should follow the recommended application circuit, and unused inputs should be configured according to the reference manual to prevent excessive current consumption.
This page combines manufacturer specifications, practical design guidance, application use cases, and pin-compatible family alternatives. It also helps engineers compare memory capacity, timer resources, packaging, and low-power behavior before committing a Tiny Gecko design to a PCB.
Drop-in alternatives for EFM32TG232F32-D-QFP64 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with EFM32TG232F32-D-QFP64 (same form factor and footprint) — differing in Package, Flash Memory, Digital I/O Pins, Product Type, RAM.
EFM32TG232F32-QFP64
✅ Drop-InContact for price
View Datasheet →EFM32TG232F32-QFP64T
✅ Drop-InContact for price
View Datasheet →EFM32TG232F64-QFP64
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
EFM32TG232F16-QFP64
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →EFM32TG232F8-QFP64
✅ Drop-InContact for price
View Datasheet →EFM32TG232F32-D-QFP64 Maximum Ratings & Electrical Characteristics
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Product Family | EFM32 Tiny Gecko |
| Maximum CPU Frequency | 32 MHz |
| Processor Architecture | ARM Cortex-M3, 32-bit |
| Flash Memory | 32 KB |
| RAM | 4 KB |
| Digital I/O Pins | 53 pins |
| Timers | 2 × 16-bit timers |
| Supply Voltage | 2.5 V or 3.3 V |
| Stop Mode Current | 0.6 µA |
| Run Mode Current | 150 µA/MHz |
| Package | 64-pin TQFP, 10 mm × 10 mm |
| Mounting Type | Surface mount |
| Order Code | EFM32TG232F32-D-QFP64 |
EFM32TG232F32-D-QFP64 64-pin tqfp, 10 mm × 10 mm Pin Configuration Guide
Pin configuration for EFM32TG232F32-D-QFP64 (64-pin tqfp, 10 mm × 10 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for EFM32TG232F32-D-QFP64.
Refer to the datasheet for full pin configuration.
Typical Applications
EFM32TG232F32-D-QFP64 is suitable for 6 applications: Battery-Powered Sensor Node, Industrial Monitoring Controller, Smart Building Control Endpoint, Portable Medical Accessory, Energy-Sensitive IoT Controller, Compact Consumer Control Module.
Battery-Powered Sensor Node
The EFM32TG232F32-D-QFP64 fits compact battery-powered sensor nodes that periodically measure temperature, light, motion, or industrial process variables. Its 32 MHz Cortex-M3 core provides ample control throughput, while 32 KB of Flash accommodates protocol and filtering firmware without requiring an external memory bus. The manufacturer EFM32TG data sheet specifies 0.6 µA in Stop mode and 150 µA/MHz in Run mode, making duty-cycled wake, measure, transmit, and sleep sequences practical. Fifty-three digital I/O pins also allow connection to sensors and discrete interface logic while retaining a compact 10 mm × 10 mm footprint.
Recommended
Industrial Monitoring Controller
For industrial monitoring equipment, the EFM32TG232F32-D-QFP64 combines deterministic 32-bit processing with 53 digital I/O pins in a 64-pin TQFP package. It can supervise digital sensors, control indicators, implement local interlocks, and manage communications without a separate host processor. The 32 KB Flash and 4 KB RAM are sufficient for compact control loops and protocol stacks, while the low-power modes benefit installations that operate intermittently. A 2.5 V or 3.3 V supply option simplifies interface planning in equipment built around low-voltage industrial logic.
Recommended
Smart Building Control Endpoint
The EFM32TG232F32-D-QFP64 is appropriate for smart-building endpoints that monitor occupancy, environmental conditions, or equipment state and actuate local outputs. Its 53 digital I/O pins support multiple digital inputs, alarm signals, and communication peripherals, while the Cortex-M3 core handles protocol conversion and event logic. Low Stop-mode consumption is valuable in endpoints that spend most of their operating life waiting for events. The 10 mm × 10 mm TQFP package provides a practical pin count without requiring a very large PCB footprint, and 32 KB Flash leaves room for local configuration and update-handling code.
Recommended
Portable Medical Accessory
The EFM32TG232F32-D-QFP64 can serve as the controller in compact medical accessories that combine a simple sensor interface, local button handling, status indication, and data transfer. Its 32-bit Cortex-M3 core supports predictable control and communication firmware, while the 4 KB RAM accommodates short working buffers and state-machine data. Low-power operation helps extend intervals between charges or battery replacements. Designers should still apply the appropriate medical-device risk process, electrical-safety validation, and applicable device requirements to the finished product; the MCU specification alone does not establish medical certification.
Recommended
Energy-Sensitive IoT Controller
The EFM32TG232F32-D-QFP64 supports IoT controllers that wake periodically, acquire local data, and communicate through serial interfaces before returning to a low-energy state. Its 0.6 µA Stop-mode specification reduces standby demand, while the 150 µA/MHz Run-mode figure allows designers to estimate active-energy cost from processor duty cycle. The 53 I/O pins provide flexibility for sensors, status LEDs, and interface transceivers. Firmware can use the autonomous peripherals associated with the Tiny Gecko platform to reduce active CPU time, making the device useful for compact remote nodes powered by batteries or harvested energy.
Recommended
Compact Consumer Control Module
The EFM32TG232F32-D-QFP64 fits compact consumer modules that coordinate buttons, LEDs, local sensors, and a serial host interface. Its 53 digital I/O pins reduce the need for external GPIO expanders, and the 32 MHz Cortex-M3 core provides ample responsiveness for user-interface logic. The 32 KB Flash and 4 KB RAM fit self-contained firmware while preserving low-power behavior. A 64-pin TQFP footprint is useful when the enclosure requires a conventional leaded-package assembly process. Firmware and peripheral assignments should be checked against the final temperature grade and the complete manufacturer application circuit.
Recommended
Recommended Products Summary
Engineering reference data for EFM32TG232F32-D-QFP64 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | EFM32TG232F32-QFP64 | EFM32TG232F32-QFP64T | EFM32TG232F64-QFP64 | EFM32TG232F16-QFP64 | EFM32TG232F8-QFP64 |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 64-TQFP (10 mm × 10 mm) | 64-TQFP (10 mm × 10 mm) | 64-TQFP (10 mm × 10 mm) | 64-TQFP (10 mm × 10 mm) | 64-TQFP (10 mm × 10 mm) | 64-TQFP (10 mm × 10 mm) |
| Flash Memory | 32 KB | 32 KB | 32 KB | 64 KB | 16 KB | 8 KB |
Key Differentiators
- Higher Flash capacity than lower-memory Tiny Gecko alternatives (vs EFM32TG232F8-QFP64)
- Balanced memory configuration for embedded control (vs EFM32TG232F64-QFP64)
- Same package and core configuration across the directly comparable family (vs EFM32TG232F32-QFP64T)
Design Notes
Use the manufacturer reference schematic and pin-description table when assigning all 64 TQFP positions. Place the required input and output decoupling capacitors next to their corresponding power pins, minimize the return-path distance for each capacitor, and preserve the recommended analog and digital grounding arrangement. Confirm the selected alternate MPN has identical pin functions before reusing an existing layout.
Design the 2.5 V or 3.3 V rail with enough startup margin for the complete board, not only the MCU. Check peripheral current, communication-interface loading, sensor demand, and regulator tolerance at the temperature extremes applicable to the product. Use the low-power modes only after preventing unintended GPIO activity, because floating or oscillating pins can increase board-level consumption.
Do not select a lower-Flash family member solely from its package. EFM32TG232F8-QFP64 has 8 KB of Flash and EFM32TG232F16-QFP64 has 16 KB, compared with 32 KB for the target, so existing firmware may exceed the available code space. Also verify ordering suffixes and temperature grade because a matching footprint does not guarantee identical qualification or operating limits.
Keep the Cortex-M3 debug interface, programming access, reset network, and clock components positioned for straightforward bring-up. Separate sensitive analog inputs from fast-switching digital routes, provide continuous ground references beneath the TQFP perimeter, and follow the manufacturer's package-land pattern exactly. The 10 mm × 10 mm TQFP footprint should not be inferred from another 64-pin package without checking its dimensions and pin pitch.
Compliance Information
RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product declaration or ordering documentation.