Analog Devices

ICL7136CPL+3 - 3.5-Digit LCD ADC | Analog Devices

MPN: ICL7136CPL+3 ✓ Active
40-pin PDIP Package Yes Speed
MOQ: 1 |

ICL7136CPL+3 Overview

The Analog Devices ICL7136CPL+3 is a low-power, 3.5-digit monolithic analog-to-digital converter with direct liquid-crystal display drive in a 40-pin PDIP package. It combines a high-impedance analog input stage, seven-segment decoders, display drivers, an integrated voltage reference, and a clock circuit, allowing a measurement system to display the converted value without external display-driver circuitry.

A 3.5-digit ADC is a metering converter designed to resolve approximately 1999 count increments when paired with its decimal display. This resolution class is commonly used for panel meters, laboratory instruments, scales, process monitors, and portable measurement equipment where a readable numeric display is more important than high-resolution waveform acquisition. The ICL7136 belongs to the ADC/DAC and data-converter hierarchy within integrated circuit and display-interface applications.

The principal advantages of the ICL7136 are its very high input impedance, low-power operation, integrated reference and clock, and direct non-multiplexed LCD drive. These characteristics reduce external component count and simplify instrumentation designs. Seven-segment decoders and segment drivers are integrated on-chip, while the voltage reference and clock circuit establish the internal operating conditions needed for repeatable measurements.

The converter uses a dual-slope conversion technique suited to low-speed precision measurement. Dual-slope operation integrates the unknown input for a defined interval and compares the result against an internally generated reference interval. This architecture favors predictable behavior, resistance to noise within the designed bandwidth, and good performance when measuring slowly changing sensor signals rather than high-frequency waveforms. The integrated clock removes the need for an external timing source.

Typical ICL7136CPL+3 applications include digital panel meters, temperature indicators, pressure and force displays, laboratory bench instruments, medical equipment, and industrial process readouts. In these systems, the device converts a differential analog input and drives a dedicated LCD, simplifying the front end while preserving the familiar 3.5-digit presentation.

PCB design should preserve analog signal integrity around the input and reference nodes and provide suitable bypass capacitance near the supply pins. Because this is a through-hole PDIP device, designers should also account for its larger footprint compared with surface-mount converter packages. Confirm display polarity, segment wiring, input range, reference details, and timing requirements against the manufacturer datasheet before layout release.

This product page combines manufacturer and distributor information with a pin-compatible comparison, application guidance, and practical design notes. It is intended to help engineers evaluate the ICL7136CPL+3 for legacy instrumentation, retrofit programs, and new low-speed metering designs that require a self-contained 3.5-digit ADC and LCD driver.

Drop-in alternatives for ICL7136CPL+3 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with ICL7136CPL+3 (same form factor and footprint) — differing in Package, Resolution.

Maxim Integrated
Package: 40-PDIP
Resolution: 12 bit
Compare with ICL7136CPL+3 →
Analog Devices
Resolution: 3.5 digits
Compare with ICL7136CPL+3 →

ICL7136CPL+

✅ Drop-In
Analog Devices
📦 40-pin PDIP
3.5-digit monolithic analog-to-digital converter · 3.5 digits · Dual-slope conversion · Differential or single-ended · Very high input impedance · Seven-segment decoders, display drivers, voltage reference, and clock · Direct non-multiplexed LCD display drive · Low-power A/D converter

Contact for price

View Datasheet →

ICL7136CPL+

✅ Drop-In
Analog Devices
📦 40-pin PDIP
3.5-digit monolithic analog-to-digital converter · 3.5 digits · Dual-slope conversion · Differential or single-ended · Very high input impedance · Seven-segment decoders, display drivers, voltage reference, and clock · Direct non-multiplexed LCD display drive · Low-power A/D converter

Contact for price

View Datasheet →

ICL7136CPLZ

✅ Drop-In
📦 40-pin PDIP
Same ICL7136 3.5-digit direct-LCD-drive family in a 40-pin PDIP package; the documented resolution difference is 0%, with supplier and ordering-code differences remaining.

📋 Reference alternative (not in catalog)

ICL7109CPL

✅ Drop-In
Maxim Integrated
📦 40-pin PDIP
12 bit · 1 differential · Dual-slope integrating · 30 samples/second · Dual Slope with zero-integrator phase · Parallel (3-state binary) · Binary + polarity + over-range · Differential

Contact for price

View Datasheet →

ICL7107CPLZ

✅ Drop-In
📦 40-pin PDIP
Related low-power 3.5-digit dual-slope LCD converter in a 40-pin PDIP package; display-output architecture differs while resolution and package dimensions remain equivalent.

📋 Reference alternative (not in catalog)

ICL7136CPL+3 Maximum Ratings & Electrical Characteristics

ADC Resolution 3.5 digits
Converter Architecture Dual-slope ADC
Display Output Direct non-multiplexed LCD drive
Package 40-pin PDIP
Package Dimensions 0.600 in (15.24 mm) width
Mounting Type Through-hole
Input Type Differential
Number of Analog Input Channels 1
Input Impedance Very high input impedance
Integrated Reference Yes
Integrated Clock Yes
Integrated Segment Decoders Yes
Integrated Display Drivers Yes

ICL7136CPL+3 0.600 in (15.24 mm) width Pin Configuration Guide

Pin configuration for ICL7136CPL+3 (0.600 in (15.24 mm) width package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

0.600 in (15.24 mm) width package pinout diagram for ICL7136CPL+3

No detailed pinout data available for ICL7136CPL+3.

Refer to the datasheet for full pin configuration.

Typical Applications

ICL7136CPL+3 is suitable for 6 applications: Digital Temperature Panel Meter, Pressure and Force Indicator, Laboratory Bench Instrument, Process Monitoring Readout, Medical Measurement Readout, Legacy Meter Retrofit.

📺

Digital Temperature Panel Meter

The ICL7136CPL+3 fits temperature instruments that present a stable numerical value on a dedicated 3.5-digit LCD. Its very high input impedance helps isolate the sensor interface from the conversion process, while the integrated reference, clock, seven-segment decoders, and segment drivers reduce the number of external support blocks. Place the converter behind the front-end amplifier or sensor network and connect the LCD according to the manufacturer pin table. The main benefit is a compact instrument architecture that preserves a familiar direct-display measurement format without requiring a separate display-driver IC.

🏭

Pressure and Force Indicator

The ICL7136CPL+3 is appropriate for slow pressure or force measurements displayed as 3.5 decimal digits. The dual-slope conversion method is suited to relatively stable transducer outputs rather than rapidly changing waveforms, and the integrated clock provides repeatable conversion timing. Its integrated reference and direct LCD drivers allow the analog front end to feed a dedicated display without an external display-driver package. Engineers should select the input range, scaling network, and sensor excitation so the complete measurement remains within the converter's specified operating limits.

🔧

Laboratory Bench Instrument

A bench meter can use the ICL7136CPL+3 when the required result is a stable, directly displayed measurement rather than a high-speed digital waveform. The device's high input impedance helps preserve sensor signals, while the integrated seven-segment decoders and LCD drivers simplify display integration. The 40-pin PDIP package is practical for hand-assembled, educational, and legacy laboratory equipment where through-hole construction supports manual assembly and repair. Validate the selected LCD's segment and common-plane connections against the manufacturer pinout before fabrication.

🏭

Process Monitoring Readout

The ICL7136CPL+3 suits industrial process readouts that convert a slowly varying analog signal into a 3.5-digit LCD value. Its low-power, self-contained architecture can simplify local panel instruments, and the integrated reference and clock remove two common external support components. Place the converter in a protected analog section and maintain separation between sensitive input routing and multiplexed LCD drive connections. For deployed equipment, confirm the exact ordering code's temperature range and operating supply limits against the intended ambient environment.

💊

Medical Measurement Readout

The ICL7136CPL+3 can form the numerical display section of a low-speed medical or laboratory instrument that reports a bounded physiological or analytical value. Its high input impedance is useful when driving the converter from a carefully designed sensor amplifier, and the direct LCD output reduces display-system complexity. Because the device provides measurement conversion and display drive rather than clinical safety isolation, the complete system must supply the required isolation, protection, and validation. Verify medical qualification requirements separately from the component's electrical specifications.

🔧

Legacy Meter Retrofit

The ICL7136CPL+3 is well suited to repairing or extending an existing 3.5-digit meter built around the ICL7136 architecture. Its 40-pin PDIP format supports direct board-level replacement when the display wiring, supply arrangement, input polarity, and reference network match the original design. The integrated clock, reference, decoders, and display drivers make it particularly useful where the original circuit depended on the ICL7136's monolithic architecture. Before installation, verify every connector and pin function against the manufacturer table rather than relying only on package dimensions.

Where to buy ICL7136CPL+3 online?
The ICL7136CPL+3 can be requested through the Request a Quote form on this page. The exact device is a 40-pin PDIP, 3.5-digit LCD ADC from Analog Devices, and current commercial availability should be confirmed when the quotation is prepared. Packaging, quantity, lead time, and delivery terms can be specified in the same request rather than relying on a static catalog listing.
What is the price of ICL7136CPL+3?
Use the Request a Quote form on this page for the current ICL7136CPL+3 commercial terms. The component is listed as a 40-pin PDIP 3.5-digit display-driver ADC, and its price can vary with order quantity and supply status. The platform renders current commercial information separately from the technical product data, while this answer avoids presenting a potentially stale price.
What is the lead time for ICL7136CPL+3?
The current lead time should be confirmed through the Request a Quote form on this page. ICL7136CPL+3 is a production 3.5-digit LCD ADC in a 40-pin PDIP package, but availability can change with component demand and fulfillment conditions. Include the required quantity, date code preference, and target shipment location in the request to obtain a practical schedule.
Is ICL7136CPL+3 in stock?
Current stock status for ICL7136CPL+3 should be confirmed through the Request a Quote form on this page. Manufacturer and distributor records identify the ICL7136 family as production, and the exact +3 ordering code is offered in a 40-pin PDIP package. The quotation process provides the appropriate channel for a quantity-specific availability response.
What is the ICL7136CPL+3 equivalent?
The closest documented equivalents are the ICL7136CPL, ICL7136CPL+, and Renesas ICL7136CPLZ families, all associated with the ICL7136 40-pin display-converter architecture. The ICL7109CPL is also a related 40-PDIP dual-slope LCD ADC, but it must be checked against display and timing requirements before substitution. No single alternative should be selected without reviewing the manufacturer pin and electrical tables.
What can replace ICL7136CPL+3?
The ICL7136CPL is the most direct same-family replacement candidate because it shares the 40-pin PDIP format and the same 3.5-digit LCD-converter function. Renesas ICL7136CPLZ and Analog Devices ICL7109CPL are additional related options, while ICL7107CPLZ and ICL7106CPLZ use different display-output arrangements. Verify pin functions, display drive, voltage, timing, and temperature requirements before replacing the installed device.
Is ICL7136CPL+3 the same as ICL7136CPL?
The ICL7136CPL+3 and ICL7136CPL both identify the 40-pin PDIP ICL7136 3.5-digit LCD ADC family, but suffix ordering codes can distinguish temperature grade, package configuration, or qualification. Their electrical identity for a given design must be confirmed from the ordering information and datasheet. Use the exact ICL7136CPL+3 markings when maintaining documentation and inspection records.
ICL7136CPL+3 vs ICL7136CPL - which is better for a panel meter?
Choose the ICL7136CPL+3 when its exact temperature grade and ordering configuration meet the panel meter's environmental requirements. The ICL7136CPL remains the baseline family option and shares the 3.5-digit, direct-LCD-drive architecture in the same 40-pin PDIP format. The practical decision is therefore grade qualification and availability, not display resolution, because both parts belong to the same converter family.
ICL7136CPL+3 vs ICL7109CPL - which is better for a digital meter?
The ICL7136CPL+3 is preferable when the design specifically requires the ICL7136 family functions and direct drive for the selected display arrangement. The ICL7109CPL is a related 12-bit, dual-slope, 40-PDIP converter and may suit some meter architectures, but it is not automatically interchangeable. Compare display segment and backplane outputs, input configuration, supply limits, conversion timing, and pin mapping before deciding.
When should I choose ICL7136CPL+3 over ICL7107CPLZ or ICL7106CPLZ?
Choose ICL7136CPL+3 when the existing meter uses the ICL7136's direct LCD-driving interface and requires its integrated seven-segment decoding and display-driver functions. ICL7107CPLZ and ICL7106CPLZ belong to related low-power display-converter families but differ in output arrangement and operating behavior. Retain ICL7136CPL+3 when PCB wiring and display polarity are already established around the ICL7136 architecture.
Is ICL7136CPL+3 suitable for industrial instrumentation?
The ICL7136CPL+3 is suitable for slow, panel-meter-style industrial instrumentation when the exact temperature grade and supply limits satisfy the installation environment. Its 3.5-digit resolution, very high input impedance, integrated reference, integrated clock, and direct LCD output suit sensors such as temperature, pressure, and process-monitoring transducers. Verify industrial qualification and temperature-range requirements for the exact ordering code before release.
Where to download the ICL7136CPL+3 datasheet PDF?
The official ICL7136 product page at Analog Devices contains the current ICL7136 data sheet and supporting documentation. Use the manufacturer document for pin functions, electrical limits, conversion timing, display compatibility, and ordering codes. The ICL7136CPL+3 is the specific 40-pin PDIP ordering variant covered by the family documentation, so production designs should also record the exact suffix in their bill of materials.
Where to find the ICL7136CPL+3 pinout?
Use the pin-description table in the official ICL7136 data sheet for the authoritative 40-pin PDIP connection. The device is a through-hole package with integrated analog input, reference, clock, decoder, and LCD-drive functions. Do not infer the pinout from a generic DIP drawing; use the manufacturer table to map segment outputs, common references, supply pins, and analog inputs.
What are the key specifications of ICL7136CPL+3 that engineers should know?
The ICL7136CPL+3 is a low-power, 3.5-digit monolithic ADC with a 40-pin PDIP package. It integrates seven-segment decoders, LCD segment drivers, a voltage reference, and a clock, while providing very high input impedance and direct non-multiplexed LCD drive. Its dual-slope architecture is intended for low-speed numerical measurement rather than high-frequency signal acquisition.
What power and layout considerations apply to ICL7136CPL+3?
Place bypass capacitors close to the device supply pins and keep sensitive input and reference routing short and away from noisy digital and LCD-drive traces. The through-hole 40-pin PDIP footprint is larger than modern surface-mount alternatives, so it can constrain compact instrument layouts. Confirm the recommended capacitor values, reference components, grounding method, and maximum signal-path impedance in the manufacturer schematic and layout guidance.

Engineering reference data for ICL7136CPL+3 — comparison, design guidance, and compliance information.

Selection Guide

Choose ICL7136CPL+3 for a new or legacy 3.5-digit meter that uses the ICL7136 direct-LCD architecture and requires the integrated reference, clock, segment decoders, and display drivers. ICL7136CPL and ICL7136CPL+ are the closest same-family choices when their exact grade and ordering suffix satisfy the design. ICL7136CPLZ provides an alternative supplier route with the same core converter format. ICL7109CPL is appropriate only when its 12-bit conversion and LCD-output arrangement match the intended instrument. ICL7107CPLZ should be selected for a design specifically built around that related display-converter interface. Because all candidates use the same broad PDIP outline, PCB compatibility alone is not sufficient; verify pin functions, display polarity, input range, supply, timing, and temperature grade before substitution.

Comparison with Alternatives

Parameter This Product ICL7136CPL ICL7136CPL+ ICL7136CPLZ ICL7109CPL ICL7107CPLZ
Brand Analog Devices Analog Devices Analog Devices Renesas Electronics Analog Devices Renesas Electronics
Package 40-pin PDIP 40-pin PDIP 40-pin PDIP 40-pin PDIP 40-pin PDIP 40-pin PDIP
Converter Type Dual-slope ADC Dual-slope ADC Dual-slope ADC Dual-slope ADC Dual-slope ADC Dual-slope ADC
Resolution 3.5 digits 3.5 digits 3.5 digits 3.5 digits 12 bits 3.5 digits
Display Interface Direct non-multiplexed LCD drive Direct non-multiplexed LCD drive Direct non-multiplexed LCD drive Direct LCD drive LCD driver LCD driver
Primary Function 3.5-digit LCD display driver ADC 3.5-digit LCD display driver ADC 3.5-digit LCD display driver ADC 3.5-digit LCD display driver ADC 12-bit LCD driver ADC Low-power LCD ADC

Key Differentiators

  • Directly integrated LCD display path (vs ICL7109CPL)
  • Exact ICL7136 family architecture (vs ICL7107CPLZ)
  • High input impedance for measurement interfaces (vs ICL7109CPL)
  • Reduced external support circuitry (vs ICL7136CPLZ)

Design Notes

Route the analog input as a short, guarded trace away from LCD segment outputs, clock signals, and switching supply nodes. Place the input and reference components near the corresponding ICL7136CPL+3 pins to minimize parasitic pickup and impedance effects. Because a high-impedance input can be sensitive to leakage, keep board contamination and connector leakage in mind during leakage-sensitive measurements.

Install the recommended bypass capacitance between the supply pins and ground with the shortest practical connection. Keep the ground return from the analog input and reference network separate from noisy LCD-drive returns where the layout permits. Confirm the exact supply voltage, capacitor values, and allowable operating range in the manufacturer datasheet before populating the board.

Treat the 40-pin PDIP footprint as a through-hole layout rather than a compact surface-mount conversion. Maintain adequate clearance around adjacent pins and account for display cables and wiring strain. If modernizing an existing design, verify the replacement's pin numbering, LCD common connections, and pin-1 orientation physically before insertion to avoid damaging a legacy display assembly.

Do not assume that every ICL71xx 40-pin converter is electrically interchangeable with the ICL7136CPL+3. Resolution, display drive, segment mapping, reference behavior, and timing can differ even when the package outline matches. Check the manufacturer ordering table and pin-description table for each proposed alternative, and verify the LCD polarity and common-plane configuration before power is applied.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for the exact ordering code.

Related Searches

ICL7136CPL+3 datasheet ICL7136CPL+3 datasheet pdf ICL7136CPL+3 pinout ICL7136CPL+3 specifications ICL7136CPL+3 equivalent ICL7136CPL+3 replacement ICL7136CPL+3 vs ICL7109CPL ICL7136CPL+3 price ICL7136CPL+3 stock Analog Devices ICL7136CPL+3 ICL7136 40-pin PDIP ADC ICL7136CPL+3 panel meter ICL7136CPL+3 schematic what is ICL7136CPL+3

Related Components & Terms

Analog Devices Maxim Integrated Renesas Electronics ICL7136CPL+3 ICL7136CPL ICL7136CPL+ ICL7136CPLZ ICL7109CPL ICL7107CPLZ 3.5-digit ADC dual-slope ADC analog-to-digital converter LCD driver seven-segment decoder direct LCD drive integrated voltage reference integrated clock high input impedance 40-pin PDIP PDIP package family through-hole technology digital panel meter industrial instrumentation medical measurement
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details