ICS574MT - 160 MHz PLL Zero-Delay Fanout Buffer | Renesas
MPN: ICS574MT ✗ End of LifeICS574MT Overview
A zero-delay buffer is a clock-distribution integrated circuit that compensates for clock-propagation delay between a source and multiple destinations. PLL-based implementations use a phase-locked loop to create an internal clock relationship that allows the outputs to track the input edge while adding little nominal propagation delay. In the broader IC hierarchy, ICS574MT belongs to the clock and timing IC family, combining clock generation, phase control, and multi-output distribution functions in one package.
The principal features of ICS574MT include a maximum operating frequency of 160 MHz, four CMOS outputs, and a 1:4 fanout ratio. The PLL architecture is intended to minimize output-to-output skew, while low jitter helps preserve timing margin in high-speed systems. Its single-circuit organization and compact 8-SOIC package make it suitable for compact systems that need several synchronized clock copies without implementing a discrete oscillator or multi-stage buffer tree.
Typical uses include processor and FPGA clock distribution, memory clock fanout, high-speed interface clocking, data-converter sampling systems, and communications equipment. The feedback connection can be used when the application requires the output rising edges to be aligned with the reference input. Because the device is intended for high-speed digital operation, board-level trace matching, controlled impedance, adequate decoupling, and careful handling of clock return paths are important for maintaining signal integrity.
Designers should compare the complete datasheet limits for supply voltage, input and output thresholds, output drive, propagation delay, jitter, skew, temperature range, and package tolerances before finalizing a circuit. The ICS574MT is most appropriate when a PLL-based four-output zero-delay buffer is needed and the board can provide a clean, continuous clock reference. Request current availability and sourcing details through the Request a Quote form on this page.
Drop-in alternatives for ICS574MT — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
ICS574MLT
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
ICS574MTG
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
ICS574MT Specifications
| Product Type | PLL-based zero-delay fanout buffer |
| Maximum Frequency | 160 MHz |
| Number of Outputs | 4 outputs |
| Input-to-Output Ratio | 1:4 |
| Number of Circuits | 1 circuit |
| PLL | Yes |
| Input Logic Level | CMOS |
| Output Logic Level | CMOS |
| Package | 8-SOIC, 0.154 inch body width, 3.90 mm width |
| Mounting Type | Surface mount |
| Feedback Input | FBIN feedback input for edge alignment |
ICS574MT 8-soic, 0.154 inch body width, 3.90 mm width Pin Configuration Guide
Pin configuration for ICS574MT (8-soic, 0.154 inch body width, 3.90 mm width package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.
No detailed pinout data available for ICS574MT.
Refer to the datasheet for full pin configuration.
Typical Applications
ICS574MT is suitable for 6 applications: FPGA Clock Distribution, Processor Memory Clocking, High-Speed Communications, Memory Interface Clock Fanout, Data Converter Sampling, Industrial Control and Instrumentation.
FPGA Clock Distribution
The ICS574MT fits FPGA clock-distribution designs that require one source clock to feed four destinations while maintaining closely related output edges. Its PLL-based zero-delay architecture is intended to reduce propagation-delay differences that can consume timing margin in high-speed FPGA fabrics. The 160 MHz maximum frequency provides a useful operating ceiling for general-purpose logic, interface, and control-clock distribution where the FPGA clock-input requirements are compatible. Connect the reference clock carefully, provide local bypass capacitance, and keep the clock routing short and controlled. The four outputs should be routed as a matched clock group, with return-path and impedance continuity considered to preserve signal integrity.
Recommended
Processor Memory Clocking
The ICS574MT is suitable for processor and memory clock trees where a single reference clock must be distributed to several sequential or parallel loads. Its four-output 1:4 topology reduces the number of separate fanout stages required, while the PLL-based design targets low skew between outputs. This can be valuable in systems where clock arrival timing affects command, address, or data-path margins. The implementation should account for trace length differences, loading, return-current continuity, and the device's documented output-drive capability. Feedback alignment should be configured as described in the datasheet rather than treating the four outputs as independent asynchronous clock sources.
Recommended
High-Speed Communications
The ICS574MT can support communications equipment that distributes a common clock to multiple high-speed channels, serializers, receivers, or interface controllers. The documented 160 MHz operation and low-skew four-output architecture help maintain a consistent relationship among clock destinations. It is most appropriate when channel timing budget and skew requirements are already defined and the source clock can remain continuous. Board implementation should separate the clock network from high-current switching nodes, provide a low-impedance ground reference, and maintain consistent propagation geometry. The PLL and feedback path should be evaluated for startup behavior and loop stability under the chosen supply and temperature conditions.
Recommended
Memory Interface Clock Fanout
The ICS574MT is appropriate for memory-interface clock fanout when several clock consumers must receive aligned copies of a high-speed source. Its four low-skew outputs can feed related memory-controller, buffer, or interface blocks while the PLL-based operation compensates for nominal propagation differences. Because memory timing can be sensitive to skew and loading, the designer should use the exact timing tables and compare the fanout capacitance with the documented output loading. Place the device near the clock branch point, keep branches electrically similar where possible, and route clock traces away from data transitions and switching-node return currents.
Recommended
Data Converter Sampling
The ICS574MT can be used in data-converter and sampling systems where a sampling or conversion clock must be distributed to multiple analog and digital blocks. The device's low-jitter, low-skew positioning makes it relevant when clock timing contributes directly to conversion synchronization or sampling consistency. The 1:4 output arrangement allows one converter clock source to serve several parallel channels or a mix of control and capture circuits. Designers should keep the clock distribution path short, use a clean reference source, and verify that analog and digital return currents do not disturb the PLL reference or feedback connection. The exact drive, jitter, and loading requirements remain design-review items.
Recommended
Industrial Control and Instrumentation
The ICS574MT can support industrial control, test, and instrumentation systems in which several digital subsystems require coherent clocking from one source. The compact 8-SOIC package and four-output configuration simplify clock distribution around processors, FPGAs, counters, and data-acquisition circuitry. Industrial products should be reviewed for the exact temperature grade, supply tolerance, and environmental requirements associated with the selected ordering code. A practical layout keeps the input and feedback routes away from switching regulators and relay-control traces, while the output branches remain short and properly referenced to the ground plane. This arrangement helps preserve the low-skew behavior expected from the PLL-based device.
Recommended
Recommended Products Summary
Engineering reference data for ICS574MT — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | ICS574MLT | ICS574MTG |
|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 8-SOIC | 8-SOIC | 8-SOIC |
Key Differentiators
- PLL-based zero-delay operation (vs ICS574MLT)
- Four-output fanout in a compact package (vs ICS574MTG)
- CMOS clock-distribution format (vs ICS574MLT)
Design Notes
Keep the reference-clock input and FBIN feedback route short, with a continuous ground reference and no stubs. The datasheet describes feedback alignment as a key operating method for the PLL-based buffer, so route this connection away from data and switching-node currents. Use the timing and jitter limits in the manufacturer datasheet to establish the usable clock-frequency and loading budget.
Distribute the four clock outputs as a matched clock group rather than allowing long, uneven branches to become independent timing paths. Maintain controlled impedance where the board architecture requires it, avoid crossing return-path discontinuities, and place the device close to the clock branch point. Verify each load's capacitance and edge requirements against the electrical characteristics before finalizing the topology.
Do not treat the four outputs as a guarantee of identical absolute timing without considering output loading, trace length, supply condition, and temperature. Confirm the exact ICS574MT ordering code, supply-voltage limits, pin orientation, and feedback configuration in the Renesas datasheet before layout release. The MT suffix identifies the shown ordering option, while related suffixes may change packaging or shipment details.
Compliance Information
The verified listing identifies the ICS574MT as a Renesas Electronics 160 MHz, four-output, 8-SOIC PLL zero-delay fanout buffer but does not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Confirm the exact suffix-specific manufacturer documentation before making a compliance determination.