ICS574MT - 160 MHz PLL Zero-Delay Fanout Buffer | Renesas
MPN: ICS574MT ✗ 停產ICS574MT 概覽
A zero-delay buffer is a clock-distribution integrated circuit that compensates for clock-propagation delay between a source and multiple destinations. PLL-based implementations use a phase-locked loop to create an internal clock relationship that allows the outputs to track the input edge while adding little nominal propagation delay. In the broader IC hierarchy, ICS574MT belongs to the clock and timing IC family, combining clock generation, phase control, and multi-output distribution functions in one package.
The principal features of ICS574MT include a maximum operating frequency of 160 MHz, four CMOS outputs, and a 1:4 fanout ratio. The PLL architecture is intended to minimize output-to-output skew, while low jitter helps preserve timing margin in high-speed systems. Its single-circuit organization and compact 8-SOIC package make it suitable for compact systems that need several synchronized clock copies without implementing a discrete oscillator or multi-stage buffer tree.
Typical uses include processor and FPGA clock distribution, memory clock fanout, high-speed interface clocking, data-converter sampling systems, and communications equipment. The feedback connection can be used when the application requires the output rising edges to be aligned with the reference input. Because the device is intended for high-speed digital operation, board-level trace matching, controlled impedance, adequate decoupling, and careful handling of clock return paths are important for maintaining signal integrity.
Designers should compare the complete datasheet limits for supply voltage, input and output thresholds, output drive, propagation delay, jitter, skew, temperature range, and package tolerances before finalizing a circuit. The ICS574MT is most appropriate when a PLL-based four-output zero-delay buffer is needed and the board can provide a clean, continuous clock reference. Request current availability and sourcing details through the Request a Quote form on this page.
直接替換替代品,適用於 ICS574MT — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
ICS574MLT
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
ICS574MTG
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
ICS574MT 規格
| Product Type | PLL-based zero-delay fanout buffer |
| Maximum Frequency | 160 MHz |
| 輸出數量 | 4 outputs |
| Input-to-Output Ratio | 1:4 |
| Number of Circuits | 1 circuit |
| PLL | Yes |
| Input Logic Level | CMOS |
| Output Logic Level | CMOS |
| 封裝 | 8-SOIC, 0.154 inch body width, 3.90 mm width |
| 安裝類型 | Surface mount |
| Feedback Input | FBIN feedback input for edge alignment |
ICS574MT 8-soic, 0.154 inch body width, 3.90 mm width 腳位配置指南
ICS574MT(8-soic, 0.154 inch body width, 3.90 mm width 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: ICS574MT.
請參閱 資料表 以查看完整腳位配置。
典型應用
ICS574MT 適用於 6 應用s: FPGA Clock Distribution, Processor Memory Clocking, High-Speed Communications, Memory Interface Clock Fanout, Data Converter Sampling, Industrial Control and Instrumentation.
FPGA Clock Distribution
The ICS574MT fits FPGA clock-distribution designs that require one source clock to feed four destinations while maintaining closely related output edges. Its PLL-based zero-delay architecture is intended to reduce propagation-delay differences that can consume timing margin in high-speed FPGA fabrics. The 160 MHz maximum frequency provides a useful operating ceiling for general-purpose logic, interface, and control-clock distribution where the FPGA clock-input requirements are compatible. Connect the reference clock carefully, provide local bypass capacitance, and keep the clock routing short and controlled. The four outputs should be routed as a matched clock group, with return-path and impedance continuity considered to preserve signal integrity.
推薦
Processor Memory Clocking
The ICS574MT is suitable for processor and memory clock trees where a single reference clock must be distributed to several sequential or parallel loads. Its four-output 1:4 topology reduces the number of separate fanout stages required, while the PLL-based design targets low skew between outputs. This can be valuable in systems where clock arrival timing affects command, address, or data-path margins. The implementation should account for trace length differences, loading, return-current continuity, and the device's documented output-drive capability. Feedback alignment should be configured as described in the datasheet rather than treating the four outputs as independent asynchronous clock sources.
推薦
High-Speed Communications
The ICS574MT can support communications equipment that distributes a common clock to multiple high-speed channels, serializers, receivers, or interface controllers. The documented 160 MHz operation and low-skew four-output architecture help maintain a consistent relationship among clock destinations. It is most appropriate when channel timing budget and skew requirements are already defined and the source clock can remain continuous. Board implementation should separate the clock network from high-current switching nodes, provide a low-impedance ground reference, and maintain consistent propagation geometry. The PLL and feedback path should be evaluated for startup behavior and loop stability under the chosen supply and temperature conditions.
推薦
Memory Interface Clock Fanout
The ICS574MT is appropriate for memory-interface clock fanout when several clock consumers must receive aligned copies of a high-speed source. Its four low-skew outputs can feed related memory-controller, buffer, or interface blocks while the PLL-based operation compensates for nominal propagation differences. Because memory timing can be sensitive to skew and loading, the designer should use the exact timing tables and compare the fanout capacitance with the documented output loading. Place the device near the clock branch point, keep branches electrically similar where possible, and route clock traces away from data transitions and switching-node return currents.
推薦
Data Converter Sampling
The ICS574MT can be used in data-converter and sampling systems where a sampling or conversion clock must be distributed to multiple analog and digital blocks. The device's low-jitter, low-skew positioning makes it relevant when clock timing contributes directly to conversion synchronization or sampling consistency. The 1:4 output arrangement allows one converter clock source to serve several parallel channels or a mix of control and capture circuits. Designers should keep the clock distribution path short, use a clean reference source, and verify that analog and digital return currents do not disturb the PLL reference or feedback connection. The exact drive, jitter, and loading requirements remain design-review items.
推薦
Industrial Control and Instrumentation
The ICS574MT can support industrial control, test, and instrumentation systems in which several digital subsystems require coherent clocking from one source. The compact 8-SOIC package and four-output configuration simplify clock distribution around processors, FPGAs, counters, and data-acquisition circuitry. Industrial products should be reviewed for the exact temperature grade, supply tolerance, and environmental requirements associated with the selected ordering code. A practical layout keeps the input and feedback routes away from switching regulators and relay-control traces, while the output branches remain short and properly referenced to the ground plane. This arrangement helps preserve the low-skew behavior expected from the PLL-based device.
推薦
推薦產品摘要
工程參考資料,適用於 ICS574MT — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ICS574MLT | ICS574MTG |
|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 8-SOIC | 8-SOIC | 8-SOIC |
主要差異化特點
- PLL-based zero-delay operation (對比ICS574MLT)
- Four-output fanout in a compact package (對比ICS574MTG)
- CMOS clock-distribution format (對比ICS574MLT)
設計說明
Keep the reference-clock input and FBIN feedback route short, with a continuous ground reference and no stubs. The datasheet describes feedback alignment as a key operating method for the PLL-based buffer, so route this connection away from data and switching-node currents. Use the timing and jitter limits in the manufacturer datasheet to establish the usable clock-frequency and loading budget.
Distribute the four clock outputs as a matched clock group rather than allowing long, uneven branches to become independent timing paths. Maintain controlled impedance where the board architecture requires it, avoid crossing return-path discontinuities, and place the device close to the clock branch point. Verify each load's capacitance and edge requirements against the electrical characteristics before finalizing the topology.
Do not treat the four outputs as a guarantee of identical absolute timing without considering output loading, trace length, supply condition, and temperature. Confirm the exact ICS574MT ordering code, supply-voltage limits, pin orientation, and feedback configuration in the Renesas datasheet before layout release. The MT suffix identifies the shown ordering option, while related suffixes may change packaging or shipment details.
合規資訊
The verified listing identifies the ICS574MT as a Renesas Electronics 160 MHz, four-output, 8-SOIC PLL zero-delay fanout buffer but does not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Confirm the exact suffix-specific manufacturer documentation before making a compliance determination.