Renesas Electronics

ICS574MT - 160 MHz PLL Zero-Delay Fanout Buffer | Renesas

부품 번호: ICS574MT ✗ 단종
8-SOIC, 0.154 inch body width, 3.90 mm width Package 160 MHz Speed
MOQ: 1 |

ICS574MT 개요

The Renesas Electronics ICS574MT is a PLL-based zero-delay fanout buffer for high-speed digital systems, operating up to 160 MHz with four low-skew outputs and a 1:4 input-to-output ratio. It is housed in an 8-SOIC package and is intended for clock distribution, memory interfacing, and other high-speed applications requiring closely aligned output edges. The device uses CMOS input and output signals and is based on IDT's proprietary low-jitter phase-locked-loop techniques. One output can be fed back to the FBIN input to align rising output edges with the input clock. ICS574MT is the tube-packaging ordering code for the 8-SOIC device; other order codes can represent different temperature or shipping configurations.

A zero-delay buffer is a clock-distribution integrated circuit that compensates for clock-propagation delay between a source and multiple destinations. PLL-based implementations use a phase-locked loop to create an internal clock relationship that allows the outputs to track the input edge while adding little nominal propagation delay. In the broader IC hierarchy, ICS574MT belongs to the clock and timing IC family, combining clock generation, phase control, and multi-output distribution functions in one package.

The principal features of ICS574MT include a maximum operating frequency of 160 MHz, four CMOS outputs, and a 1:4 fanout ratio. The PLL architecture is intended to minimize output-to-output skew, while low jitter helps preserve timing margin in high-speed systems. Its single-circuit organization and compact 8-SOIC package make it suitable for compact systems that need several synchronized clock copies without implementing a discrete oscillator or multi-stage buffer tree.

Typical uses include processor and FPGA clock distribution, memory clock fanout, high-speed interface clocking, data-converter sampling systems, and communications equipment. The feedback connection can be used when the application requires the output rising edges to be aligned with the reference input. Because the device is intended for high-speed digital operation, board-level trace matching, controlled impedance, adequate decoupling, and careful handling of clock return paths are important for maintaining signal integrity.

Designers should compare the complete datasheet limits for supply voltage, input and output thresholds, output drive, propagation delay, jitter, skew, temperature range, and package tolerances before finalizing a circuit. The ICS574MT is most appropriate when a PLL-based four-output zero-delay buffer is needed and the board can provide a clean, continuous clock reference. Request current availability and sourcing details through the Request a Quote form on this page.

드롭인 대체품: ICS574MT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

ICS574MLT

✅ 드롭인 ⚠️ 사양 미검증
📦 8-SOIC
Same ICS574 PLL zero-delay fanout-buffer family and 8-SOIC footprint; ordering suffix differs, typically indicating packaging or shipment configuration, with no verified functional difference stated

📋 참조 대체품 (카탈로그에 없음)

ICS574MTG

✅ 드롭인 ⚠️ 사양 미검증
📦 8-SOIC
Same ICS574 family and 8-SOIC package option; suffix-specific temperature or shipment details must be checked against the Renesas ordering information

📋 참조 대체품 (카탈로그에 없음)

ICS574MT 사양

Product Type PLL-based zero-delay fanout buffer
Maximum Frequency 160 MHz
출력 수 4 outputs
Input-to-Output Ratio 1:4
Number of Circuits 1 circuit
PLL Yes
Input Logic Level CMOS
Output Logic Level CMOS
패키지 8-SOIC, 0.154 inch body width, 3.90 mm width
실장 유형 Surface mount
Feedback Input FBIN feedback input for edge alignment

ICS574MT 8-soic, 0.154 inch body width, 3.90 mm width 핀 구성 가이드

ICS574MT(8-soic, 0.154 inch body width, 3.90 mm width 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

ICS574MT의 8-soic, 0.154 inch body width, 3.90 mm width 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ICS574MT.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ICS574MT 적합 용도: 6 애플리케이션s: FPGA Clock Distribution, Processor Memory Clocking, High-Speed Communications, Memory Interface Clock Fanout, Data Converter Sampling, Industrial Control and Instrumentation.

🖥️

FPGA Clock Distribution

The ICS574MT fits FPGA clock-distribution designs that require one source clock to feed four destinations while maintaining closely related output edges. Its PLL-based zero-delay architecture is intended to reduce propagation-delay differences that can consume timing margin in high-speed FPGA fabrics. The 160 MHz maximum frequency provides a useful operating ceiling for general-purpose logic, interface, and control-clock distribution where the FPGA clock-input requirements are compatible. Connect the reference clock carefully, provide local bypass capacitance, and keep the clock routing short and controlled. The four outputs should be routed as a matched clock group, with return-path and impedance continuity considered to preserve signal integrity.

🖥️

Processor Memory Clocking

The ICS574MT is suitable for processor and memory clock trees where a single reference clock must be distributed to several sequential or parallel loads. Its four-output 1:4 topology reduces the number of separate fanout stages required, while the PLL-based design targets low skew between outputs. This can be valuable in systems where clock arrival timing affects command, address, or data-path margins. The implementation should account for trace length differences, loading, return-current continuity, and the device's documented output-drive capability. Feedback alignment should be configured as described in the datasheet rather than treating the four outputs as independent asynchronous clock sources.

🌐

High-Speed Communications

The ICS574MT can support communications equipment that distributes a common clock to multiple high-speed channels, serializers, receivers, or interface controllers. The documented 160 MHz operation and low-skew four-output architecture help maintain a consistent relationship among clock destinations. It is most appropriate when channel timing budget and skew requirements are already defined and the source clock can remain continuous. Board implementation should separate the clock network from high-current switching nodes, provide a low-impedance ground reference, and maintain consistent propagation geometry. The PLL and feedback path should be evaluated for startup behavior and loop stability under the chosen supply and temperature conditions.

🖥️

Memory Interface Clock Fanout

The ICS574MT is appropriate for memory-interface clock fanout when several clock consumers must receive aligned copies of a high-speed source. Its four low-skew outputs can feed related memory-controller, buffer, or interface blocks while the PLL-based operation compensates for nominal propagation differences. Because memory timing can be sensitive to skew and loading, the designer should use the exact timing tables and compare the fanout capacitance with the documented output loading. Place the device near the clock branch point, keep branches electrically similar where possible, and route clock traces away from data transitions and switching-node return currents.

📺

Data Converter Sampling

The ICS574MT can be used in data-converter and sampling systems where a sampling or conversion clock must be distributed to multiple analog and digital blocks. The device's low-jitter, low-skew positioning makes it relevant when clock timing contributes directly to conversion synchronization or sampling consistency. The 1:4 output arrangement allows one converter clock source to serve several parallel channels or a mix of control and capture circuits. Designers should keep the clock distribution path short, use a clean reference source, and verify that analog and digital return currents do not disturb the PLL reference or feedback connection. The exact drive, jitter, and loading requirements remain design-review items.

🏭

Industrial Control and Instrumentation

The ICS574MT can support industrial control, test, and instrumentation systems in which several digital subsystems require coherent clocking from one source. The compact 8-SOIC package and four-output configuration simplify clock distribution around processors, FPGAs, counters, and data-acquisition circuitry. Industrial products should be reviewed for the exact temperature grade, supply tolerance, and environmental requirements associated with the selected ordering code. A practical layout keeps the input and feedback routes away from switching regulators and relay-control traces, while the output branches remain short and properly referenced to the ground plane. This arrangement helps preserve the low-skew behavior expected from the PLL-based device.

What is the ICS574MT?
The ICS574MT is a PLL-based zero-delay fanout buffer from Renesas Electronics. According to the manufacturer datasheet, it provides four low-skew CMOS outputs at speeds up to 160 MHz and uses a 1:4 input-to-output ratio. The device is packaged in an 8-SOIC package and is intended for high-speed clock-distribution applications.
What is the maximum frequency of the ICS574MT?
The ICS574MT operates at speeds up to 160 MHz, according to the ICS574MT datasheet. This rating applies to the high-speed digital clocking function described for the device. The operating limits also depend on the selected supply voltage and input-output conditions, so those values should be checked against the datasheet when designing a specific clock tree.
How many outputs does the ICS574MT provide?
The ICS574MT provides four CMOS outputs from one clock input. The documented input-to-output ratio is 1:4, making the part suitable for distributing one source clock to four destinations. The four outputs are intended to provide low-skew copies for high-speed systems, including processor, memory, FPGA, and interface clocking.
Does the ICS574MT use a PLL?
Yes. The ICS574MT uses a PLL-based architecture based on IDT's proprietary low-jitter phase-locked-loop techniques. The datasheet identifies the device as a low-jitter, low-skew, high-performance zero-delay buffer. The PLL architecture compensates for propagation differences and supports closely aligned output edges when the feedback path is configured correctly.
What package does the ICS574MT use?
The ICS574MT is supplied in an 8-SOIC surface-mount package with a stated body width of 0.154 inch, or 3.90 mm. The package is suitable for conventional PCB assembly and surface-mount reflow. Confirm the exact ordering code and pin orientation on the manufacturer datasheet before creating the PCB footprint or assembling a prototype.
Where can I download the ICS574MT datasheet PDF?
The ICS574MT datasheet PDF is available through the DiGi Electronics document link listed on this page, while the manufacturer datasheet can also be located by searching the ICS574MT ordering code on Renesas Electronics' product resources. The document contains the device description, timing parameters, pin information, and application details needed for a complete design review.
How do I use the FBIN feedback pin on the ICS574MT?
The FBIN input receives a feedback clock so the device can align the rising edges of its outputs with the reference input. The datasheet describes connecting one output directly to FBIN for edge alignment. In the PCB, keep this feedback route short and isolate it from unrelated noisy clock or data traces to avoid introducing jitter into the feedback loop.
Can the ICS574MT replace a conventional clock buffer?
The ICS574MT can replace a conventional multi-output clock buffer when the application can accommodate a PLL-based zero-delay device and the required timing characteristics. Replacement also depends on package footprint, pin functions, supply voltage, output count, and input-to-output ratio. Use the manufacturer datasheet and a formal pin and timing comparison rather than assuming generic buffer compatibility.
What is the best drop-in replacement for the ICS574MT?
The best drop-in replacement is the exact Renesas ordering code that preserves the 8-SOIC footprint, pin functions, four-output 1:4 topology, supply requirements, and timing class of the ICS574MT. Renesas family ordering variants may differ in shipping or temperature configuration, so verify the suffix-specific datasheet and parameter table. Request sourcing assistance through the Request a Quote form for the exact replacement MPN.
Is the ICS574MT suitable for FPGA clock distribution?
Yes. The ICS574MT is suitable for FPGA clock distribution when the design needs a single source clock fanned out to four destinations with closely related output timing. Its PLL-based zero-delay architecture can help preserve edge alignment in high-speed systems. Validate the FPGA clock-input requirements, jitter budget, voltage levels, and maximum operating frequency against the device datasheet.
What are the key specifications of the ICS574MT that engineers should know?
The key engineering specifications are a 160 MHz maximum operating frequency, four CMOS outputs, a 1:4 input-to-output ratio, PLL-based zero-delay operation, and an 8-SOIC package. The device is specifically positioned as a low-jitter, low-skew fanout buffer for high-speed applications. Supply voltage, propagation delay, jitter, skew, temperature range, and output-drive limits should be taken from the complete timing and electrical tables.
How does the ICS574MT compare with a plain fanout buffer?
The ICS574MT differs from a plain fanout buffer by using PLL techniques to compensate for propagation delay and maintain low output skew. A conventional buffer may simply reproduce the input edge with fixed propagation delay, whereas the ICS574MT is designed for high-speed systems requiring tighter edge-to-edge alignment. The trade-off is the additional device functionality and the need to design the feedback path carefully.
Is the ICS574MT in stock and what is its lead time?
Current stock and lead time for the exact ICS574MT ordering code should be confirmed through the Request a Quote form on this page. The verified product listing identifies the part and describes its 160 MHz, four-output, 8-SOIC configuration, but it does not provide a reliable quantity-break stock statement. Use the quote form for the current production and delivery position.
What is the price of the ICS574MT?
The current price of the ICS574MT depends on order quantity, package code, and current supplier conditions. Use the Request a Quote form on this page for a quantity-specific quotation and current availability. The product records in this page are intended for technical selection, while the quote form provides the appropriate commercial response for the exact MPN.
Does the ICS574MT meet automotive or RoHS requirements?
The automotive qualification and material-compliance status of the exact ICS574MT ordering code must be confirmed from the Renesas product documentation or declaration associated with that code. The verified listing identifies the device as an 8-SOIC PLL zero-delay fanout buffer but does not state RoHS, REACH, or AEC-Q100 status. Do not assume qualification from the package or clocking function alone.

엔지니어링 참조 데이터: ICS574MT — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the ICS574MT when the design needs a four-output, 1:4 PLL-based zero-delay buffer operating up to 160 MHz in an 8-SOIC package, particularly for FPGA, memory, processor, or communications clock trees. Choose ICS574MLT or ICS574MTG only after confirming that the suffix-specific temperature, packaging, shipment, and electrical details preserve the required timing and regulatory conditions. The PLL architecture is preferable to a simple buffer when output-to-output skew must be tightly controlled, but it requires correct feedback routing and a clean reference clock. For designs that do not need four synchronized outputs or do not operate near the 160 MHz class, a simpler buffer may reduce design complexity. Always use the exact manufacturer datasheet for final footprint, timing, and supply checks.

대체품과의 비교

파라미터 이 제품 ICS574MLT ICS574MTG
Brand Renesas Electronics Renesas Electronics Renesas Electronics
Package 8-SOIC 8-SOIC 8-SOIC

주요 차별점

  • PLL-based zero-delay operation (vs ICS574MLT)
  • Four-output fanout in a compact package (vs ICS574MTG)
  • CMOS clock-distribution format (vs ICS574MLT)

설계 노트

Keep the reference-clock input and FBIN feedback route short, with a continuous ground reference and no stubs. The datasheet describes feedback alignment as a key operating method for the PLL-based buffer, so route this connection away from data and switching-node currents. Use the timing and jitter limits in the manufacturer datasheet to establish the usable clock-frequency and loading budget.

Distribute the four clock outputs as a matched clock group rather than allowing long, uneven branches to become independent timing paths. Maintain controlled impedance where the board architecture requires it, avoid crossing return-path discontinuities, and place the device close to the clock branch point. Verify each load's capacitance and edge requirements against the electrical characteristics before finalizing the topology.

Do not treat the four outputs as a guarantee of identical absolute timing without considering output loading, trace length, supply condition, and temperature. Confirm the exact ICS574MT ordering code, supply-voltage limits, pin orientation, and feedback configuration in the Renesas datasheet before layout release. The MT suffix identifies the shown ordering option, while related suffixes may change packaging or shipment details.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The verified listing identifies the ICS574MT as a Renesas Electronics 160 MHz, four-output, 8-SOIC PLL zero-delay fanout buffer but does not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Confirm the exact suffix-specific manufacturer documentation before making a compliance determination.

데이터 검증일: 2026-11-11 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

ICS574MT datasheet ICS574MT datasheet PDF ICS574MT pinout ICS574MT specifications ICS574MT 160 MHz ICS574MT 8-SOIC ICS574MT zero delay buffer ICS574MT equivalent ICS574MT replacement ICS574MT vs ICS574MLT ICS574MT price ICS574MT stock Renesas ICS574MT ICS574MT FPGA clock

관련 부품 & 용어

Renesas Electronics ICS574MT ICS574MLT ICS574MTG zero-delay buffer fanout buffer PLL phase-locked loop clock and timing IC clock distribution low jitter low skew CMOS 160 MHz 1:4 fanout ratio four outputs 8-SOIC surface-mount package FBIN feedback FPGA memory interface communications equipment signal integrity JEDEC
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기