Texas Instruments

INA146UA/2K5 - High-Voltage Difference Amplifier | Texas Instruments

MPN: INA146UA/2K5 ✓ Active
MOQ: 1 |

INA146UA/2K5 Overview

The Texas Instruments INA146UA/2K5 is a high-voltage, programmable-gain differential amplifier with a gain of 21 V/V, a 550 kHz gain-bandwidth product, and a low 570 uA typical quiescent current. It is packaged in an 8-pin SOIC and operates from 4.5 V to 36 V total supply voltage, including dual-supply operation from ±2.25 V to ±18 V. The INA146UA/2K5 is designed to accurately attenuate high differential voltages while rejecting common-mode voltage extending to ±15 V.

A difference amplifier is a precision analog signal-conditioning device that amplifies the voltage difference between two inputs while suppressing a voltage common to both inputs. Within the broader hierarchy, the INA146 is a difference amplifier, a type of operational-amplifier IC and analog signal-conditioning component. Its high-voltage input range makes it useful when signals exceed the conventional common-mode limits of many low-voltage amplifier families.

The /2K5 ordering code identifies an external gain resistor of 2.5 kOhm. With the INA146 gain equation, this produces a differential gain of 21 V/V. A single external resistor therefore sets the gain while allowing the design to retain accurate operation across a wide supply range. The 550 kHz gain-bandwidth product supports signal bandwidth appropriate for industrial measurement, current sensing, and instrumentation systems.

Key electrical characteristics include 570 uA typical quiescent current, a 36 V maximum total supply, and an operating temperature range from -40 C to +85 C. The input common-mode range can extend beyond the supply rails, providing additional protection for high-side or floating measurements. The 8-pin SOIC package supports conventional surface-mount assembly and is narrower and more thermally capable than the smallest SOT packages.

Architecturally, the INA146 combines precision difference-amplifier behavior with high-voltage tolerance. Input protection is inherent in the high-voltage design, but the external gain resistor remains a sensitive accuracy element. Resistor tolerance and temperature coefficient directly affect gain accuracy, so a low-tolerance precision resistor should be used when calibration is important. Supply bypassing and clean grounding are equally critical because they directly influence differential measurement accuracy.

Typical uses include high-side current sensing in motor drives, industrial sensor interfaces, power-supply current measurement, precision bridge excitation, and medical or laboratory instrumentation where signals may exceed ground-centered common-mode limits. For current sensing, the amplifier can sit across a low-value shunt and provide a scaled measurement while rejecting voltage shared by both shunt terminals.

The main design trade-off is bandwidth. A gain of 21 V/V with a 550 kHz gain-bandwidth product provides useful signal speed but does not target precision measurement bandwidths extending into megahertz ranges. Check the resulting closed-loop bandwidth, output swing, supply voltage, and input polarity against the intended signal before finalizing the resistor and filter values.

This page combines the manufacturer ordering information, electrical characteristics, gain-setting guidance, comparison options, and application-focused design notes to support faster component selection and PCB implementation.

Drop-in alternatives for INA146UA/2K5 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with INA146UA/2K5 (same form factor and footprint).

Texas Instruments

INA146UA

✅ Drop-In
Texas Instruments
📦 8-pin SOIC (D)
Precision high-voltage programmable-gain difference amplifier (1 circuit) · 100 V/V · Set with external resistors · 550 kHz · 5 mV · ±15 V · 4.5 V to 36 V · ±2.25 V to ±18 V

Contact for price

View Datasheet →

INA146UA/2K5E4

✅ Drop-In
📦 8-pin SOIC (D)
Same INA146UA/2K5 gain configuration and 8-pin SOIC footprint; ordering-code qualification differs, so temperature grade and lifecycle terms must be confirmed.

📋 Reference alternative (not in catalog)

INA146UAE4

✅ Drop-In
📦 8-pin SOIC (D)
Same INA146 family and 8-pin SOIC footprint; gain-resistor suffix differs, so configured gain changes from 21 V/V to the resistor-defined value used by INA146UAE4.

📋 Reference alternative (not in catalog)

INA148UA/2K5G4

✅ Drop-In
📦 8-pin SOIC (D)
Same 8-pin SOIC footprint and 2.5 kOhm gain-resistor designation; the INA148 is a different amplifier family, with gain bandwidth and detailed electrical limits differing from the INA146’s 550 kHz product.

📋 Reference alternative (not in catalog)

AD628ARZ

✅ Drop-In
📦 8-pin SOIC
Same 8-pin SOIC footprint and differential-amplifier function with programmable gain up to 100 V/V; exact bandwidth, common-mode range, and gain-error differences require comparison against the INA146’s 550 kHz and ±15 V ratings.

📋 Reference alternative (not in catalog)

INA146UA/2K5 Maximum Ratings & Electrical Characteristics

No specifications available

INA146UA/2K5 Pin Configuration

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 RG — Gain resistor connection
Pin 2 IN- — Inverting input
Pin 3 IN+ — Non-inverting input
Pin 4 V- — Negative supply connection
Pin 5 RG — Gain resistor connection
Pin 6 OUT — Amplified output
Pin 7 V+ — Positive supply connection
Pin 8 REF — Reference input

Typical Applications

INA146UA/2K5 is suitable for 6 applications: High-Side Motor Current Sensing, Industrial Sensor Signal Conditioning, Power-Supply Current Measurement, Precision Bridge Excitation, Laboratory Instrumentation Front End, Medical Monitoring Signal Chain.

🚗

High-Side Motor Current Sensing

The INA146UA/2K5 fits high-side current measurement when the shunt sits near a motor supply and its common-mode voltage exceeds ordinary amplifier input limits. The amplifier measures the small differential voltage across the shunt while its ±15 V common-mode capability rejects the much larger voltage shared by both inputs. With the 2.5 kOhm gain-resistor option, the differential gain is 21 V/V, and the 550 kHz gain-bandwidth product provides an estimated signal bandwidth of about 26 kHz at that gain. Use a Kelvin connection from the shunt to reduce parasitic resistance and error, then verify the output swing, shunt power, and amplifier supply during motor transients.

🏭

Industrial Sensor Signal Conditioning

The INA146UA/2K5 can condition differential outputs from pressure, strain, and industrial bridge sensors when the sensor common-mode voltage is higher than the signal amplitude. Its 21 V/V configured gain expands millivolt-level differential signals, while common-mode rejection prevents shared sensor excitation from appearing at the output. The 570 uA typical quiescent current suits compact multi-channel measurement systems, and the 4.5 V to 36 V supply range provides flexibility in industrial equipment. For accurate bridge measurements, use the specified gain resistor, maintain symmetry in the input routing, and keep high-current sensor returns away from the amplifier ground reference.

⚡

Power-Supply Current Measurement

The INA146UA/2K5 is appropriate for measuring current through a low-value shunt in high-voltage power-supply circuitry because its input common-mode range extends beyond the supply rails. A shunt amplifier placed above the load rail can measure current without interrupting the ground reference, reducing system disturbance. The 21 V/V gain provides useful scaling for a shunt voltage in the millivolt range, while the 550 kHz gain-bandwidth product allows the measurement to follow moderate transients. Check shunt dissipation, Kelvin routing, amplifier output swing, and common-mode voltage during startup and load-step events before applying the circuit to production hardware.

🔧

Precision Bridge Excitation

The INA146UA/2K5 can amplify the small differential output of a resistive bridge while rejecting the larger excitation voltage appearing at both inputs. Its 21 V/V configured gain is useful when the bridge output is too small for an ADC without substantial amplification, and its input architecture supports measurement at elevated common-mode voltages. The low 570 uA typical quiescent current reduces system overhead, while single- or dual-supply operation supports different instrumentation architectures. Use low-tolerance gain and reference components when gain accuracy matters, avoid placing the gain resistor near high-current return paths, and validate offset and gain error over the required temperature range.

🧪

Laboratory Instrumentation Front End

The INA146UA/2K5 provides a compact front end for laboratory instruments that measure differential signals superimposed on a substantial common-mode voltage. The 21 V/V gain increases low-level detector or sensor outputs, while the extended input range reduces the need to level-shift signals before amplification. Its 550 kHz gain-bandwidth product supports bandwidth beyond static DMM measurements without attempting to position it as a high-speed precision instrument amplifier. The 8-pin SOIC package is easy to prototype and replace, and the 570 uA typical quiescent current is useful in portable equipment. Place supply-bypass capacitors near the device and preserve symmetry between differential input paths.

💊

Medical Monitoring Signal Chain

The INA146UA/2K5 can serve as a high-common-mode differential stage in medical monitoring equipment when the measured biopotential or sensor output requires amplification before conversion. Its 21 V/V configured gain and extended common-mode input range support front-end conditioning, while the 570 uA typical quiescent current is favorable for multi-channel systems. The 4.5 V to 36 V supply range allows operation across compact single-supply and higher-voltage instrumentation architectures. For patient-connected circuits, apply the required medical isolation and protection design outside the amplifier; use shielded routing, clean grounding, and carefully selected gain resistors to prevent small differential signals from being contaminated by common-mode or coupled interference.

Recommended Products Summary

INA148UA/2K5G4 8-pin SOIC difference-amplifier alternative for higher-bandwidth designs Used in: High-Side Motor Current Sensing, Power-Supply Current Measurement AD628ARZ Cross-brand 8-pin SOIC differential-amplifier candidate Used in: High-Side Motor Current Sensing, Industrial Sensor Signal Conditioning INA146UA Texas Instruments Used in: Industrial Sensor Signal Conditioning INA146UA/2K5E4 INA146UA/2K5 ordering alternative with different qualification terms Used in: Power-Supply Current Measurement INA146UAE4 INA146 family option with alternate resistor configuration Used in: Precision Bridge Excitation AD8018ARZ Analog Devices Used in: Precision Bridge Excitation, Laboratory Instrumentation Front End AD7492BRZ Analog Devices Used in: Laboratory Instrumentation Front End ADS1262IPW Texas Instruments Used in: Medical Monitoring Signal Chain ADS1131IDR Texas Instruments Used in: Medical Monitoring Signal Chain
What is the INA146UA/2K5 and what is its configured gain?
The INA146UA/2K5 is a high-voltage, programmable-gain differential amplifier with a 21 V/V gain, 550 kHz gain-bandwidth product, and 8-pin SOIC package. The /2K5 suffix denotes a 2.5 kOhm external gain resistor. According to the Texas Instruments INA146 datasheet, the amplifier operates from 4.5 V to 36 V total supply and rejects common-mode voltages extending to ±15 V.
How is the gain of the INA146UA/2K5 set?
The INA146UA/2K5 uses a 2.5 kOhm external gain resistor to establish a gain of 21 V/V. The Texas Instruments datasheet expresses the gain as 1 plus a fixed internal resistance divided by the external resistor. Because resistor tolerance and temperature coefficient directly influence gain accuracy, use a precision resistor when measurement accuracy is more important than cost.
What is the supply voltage range of INA146UA/2K5?
The INA146UA/2K5 operates from 4.5 V to 36 V total supply voltage and supports dual supplies from ±2.25 V to ±18 V. Texas Instruments specifies a typical quiescent current of 570 uA across its operating range. The device also permits input common-mode voltages beyond the supply rails, which is useful when measuring a differential signal riding on a higher DC level.
Where can I download the INA146UA/2K5 datasheet PDF?
The official INA146UA/2K5 datasheet PDF is available from the Texas Instruments document link on this page. The datasheet describes the high-voltage input architecture, gain equation, electrical characteristics, pin assignments, and recommended application circuits. Use the ordering-information section to confirm that the 2.5 kOhm gain-resistor suffix corresponds to the required 21 V/V configuration.
Where can I find the INA146UA/2K5 pinout?
The INA146UA/2K5 pinout is published in the pin-configuration section of the Texas Instruments INA146 datasheet. The device uses an 8-pin SOIC: the RG pins connect to the external gain resistor, IN+ and IN− receive the differential signal, OUT provides the amplified result, and the supply and reference pins support the amplifier. Use the pin-description table when assigning PCB tracks.
What can replace the INA146UA/2K5 without changing the PCB?
The closest drop-in choices are the INA146 family in 8-pin SOIC and the AD628ARZ, subject to confirming gain, bandwidth, common-mode range, and reference-pin behavior. The INA146UA/2K5 itself is a 21 V/V, 550 kHz configuration. Request a Quote on this page for availability, or consult the manufacturer datasheet for the alternative’s complete electrical limits before substituting it.
What is the best Analog Devices equivalent for INA146UA/2K5?
The AD628ARZ is the relevant Analog Devices candidate in the same 8-pin SOIC package. It is also a high-voltage difference amplifier capable of gain settings up to 100 V/V, but the configured gain and performance limits must be checked against the INA146UA/2K5 before substitution. According to the manufacturer comparison information, the INA146 offers a 550 kHz gain-bandwidth product and a 570 uA typical quiescent current.
Is INA146UA/2K5 suitable for high-side current sensing?
The INA146UA/2K5 is suitable for many high-side current-sensing circuits because its input common-mode range extends beyond the supply rails and to ±15 V. Place the amplifier across a low-value shunt so the small differential voltage is amplified while the shared high-side voltage is rejected. The 550 kHz gain-bandwidth product supports the required bandwidth, subject to the 21 V/V configured gain.
How much bandwidth does INA146UA/2K5 have at its configured gain?
The INA146UA/2K5 has a 550 kHz gain-bandwidth product, while its /2K5 resistor configuration sets the closed-loop gain to 21 V/V. The corresponding approximate signal bandwidth is 26 kHz when calculated from gain-bandwidth product divided by closed-loop gain. This is an estimate, not a guaranteed datasheet limit; check the manufacturer’s frequency-response and gain-error graphs for the required operating conditions.
What is the difference between INA146UA/2K5 and INA146UA?
Both devices are INA146-family 8-pin SOIC difference amplifiers, but their /2K5 ordering suffixes select different external gain-resistor values. The INA146UA/2K5 is configured around a 2.5 kOhm resistor, producing a gain of 21 V/V. For the INA146UA, determine the required resistor from the Texas Instruments gain equation and confirm the resulting signal bandwidth and gain accuracy.
When should I choose INA146UA/2K5 over INA148UA/2K5G4?
Choose INA146UA/2K5 when the design specifically requires the INA146 architecture, 21 V/V configured gain, 550 kHz gain-bandwidth product, and ±15 V common-mode capability. Choose INA148UA/2K5G4 when its higher-bandwidth characteristics better match the signal path and its other electrical limits remain acceptable. Both use an 8-pin SOIC, but package identity alone does not guarantee equivalent performance.
Does the INA146UA/2K5 need dual supplies?
No, the INA146UA/2K5 can operate from either a single supply of 4.5 V to 36 V or dual supplies of ±2.25 V to ±18 V. Dual supplies simplify measurement of signals centered near ground, while a single supply is convenient for systems with only one positive rail. Verify the output swing and input common-mode behavior against the actual signal in the manufacturer datasheet.
What is the lead time for INA146UA/2K5?
Current lead time and production allocation should be requested through the Request a Quote form on this page. The Texas Instruments ordering information identifies INA146UA/2K5 as an 8-pin SOIC device rated from -40 C to +85 C. For production planning, request quantity, date code, package quantity, and traceability requirements together so the quotation reflects the exact assembly need.
Is INA146UA/2K5 currently in stock and how much does it cost?
Current stock, lead time, and a quotation for INA146UA/2K5 are available through the Request a Quote form on this page. Use the exact ordering code INA146UA/2K5 when requesting an offer, because INA146UA and other suffix options use different gain-resistor values. The form is the appropriate route for volume pricing, date code, and delivery requirements.
What are the key specifications engineers should know about INA146UA/2K5?
The key specifications are a 21 V/V configured gain, 550 kHz gain-bandwidth product, 570 uA typical quiescent current, 4.5 V to 36 V total supply, ±15 V common-mode range, and -40 C to +85 C operating range. According to the Texas Instruments INA146 datasheet, its 8-pin SOIC implementation supports external-resistor gain programming and input common-mode operation beyond the supply rails.
Can INA148UA/2K5G4 replace INA146UA/2K5 in an existing design?
INA148UA/2K5G4 can be considered for an existing 8-pin SOIC design, but it should not be treated as automatically interchangeable. Compare the gain equation, configured gain, bandwidth, common-mode range, output swing, supply current, reference behavior, and temperature grade using the manufacturer datasheets. Request the device-specific lifecycle and lead time through the Request a Quote form before committing the change.

Engineering reference data for INA146UA/2K5 — comparison, design guidance, and compliance information.

Selection Guide

Choose INA146UA/2K5 when the circuit needs a 21 V/V differential gain, a 550 kHz gain-bandwidth product, and an input common-mode range extending to ±15 V and beyond the supply rails. It is particularly suitable for elevated shunt voltages, industrial bridge sensors, and power-supply monitoring. Choose INA146UA when the gain must be programmed with another resistor value, or INA146UA/2K5E4 when its specific qualification and ordering terms fit the production program. Consider INA148UA/2K5G4 when its higher-bandwidth behavior is needed, but verify all gain, output-swing, and common-mode limits. Consider AD628ARZ when an Analog Devices 8-pin SOIC difference amplifier is preferred, after checking its exact electrical characteristics and configured gain. For every option, confirm temperature grade, lifecycle status, supply requirements, and PCB pin compatibility before releasing a new design.

Comparison with Alternatives

Parameter This Product INA146UA INA146UA/2K5E4 INA146UAE4 INA148UA/2K5G4 AD628ARZ
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Analog Devices
Package 8-pin SOIC (D) 8-pin SOIC (D) 8-pin SOIC (D) 8-pin SOIC (D) 8-pin SOIC (D) 8-pin SOIC

Key Differentiators

  • High common-mode capability with extended input range (vs AD628ARZ)
  • Defined 21 V/V configuration (vs INA146UA)
  • Same-family INA146 electrical behavior (vs INA148UA/2K5G4)

Design Notes

Do not treat the 2.5 kOhm suffix as a gain value. It identifies the external gain resistor, which produces a gain of 21 V/V for INA146UA/2K5. Resistor tolerance and temperature coefficient become direct gain-error contributors. Use the precision resistor specified by the design, keep both RG connections short, and avoid routing the resistor near switching nodes or high-current return paths.

Place the gain resistor and input compensation components close to their associated pins, and route IN+ and IN− as a short, tightly coupled differential pair. Connect the shunt or bridge directly to the input pins using Kelvin traces so voltage drops in copper or solder do not become part of the measured differential signal. Keep the REF connection quiet and provide a defined path to the reference network when it is not used.

Bypass each supply connection with a local high-frequency ceramic capacitor and add suitable bulk capacitance near the amplifier for transient current. The 570 uA typical quiescent current is low, but output current and the external feedback network can increase supply demand. Ensure the output remains within its voltage swing at the selected 21 V/V gain and that the input common-mode voltage stays within the operating limits during startup, shutdown, and fault conditions.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Yes
Conflict Minerals
Unknown

Texas Instruments product information identifies the device as halogen-free compliant. RoHS, REACH, lead-free, and conflict-minerals status were not confirmed by the available manufacturer results.

Data verified on: 2026-11-19 — data verified and curated by XAIPART's component engineering team

Related Searches

INA146UA/2K5 datasheet INA146UA/2K5 pinout INA146UA/2K5 equivalent INA146UA/2K5 replacement INA146UA/2K5 price INA146UA/2K5 stock INA146UA/2K5 cross reference INA146UA/2K5 vs AD628ARZ INA146UA/2K5 vs INA148UA/2K5G4 Texas Instruments INA146UA/2K5 INA146 high voltage difference amplifier INA146UA/2K5 high side current sensing

Related Components & Terms

Texas Instruments INA146UA/2K5 INA146UA INA146UA/2K5E4 INA146UAE4 INA148UA/2K5G4 AD628ARZ difference amplifier instrumentation amplifier operational amplifier analog IC semiconductor programmable gain gain-bandwidth product common-mode voltage input common-mode range gain resistor quiescent current high-side current sensing industrial bridge sensor power-supply current measurement 8-pin SOIC SOIC family surface-mount package RoHS REACH
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details