Texas Instruments

INA2132UA - Dual 36V Difference Amp | Texas Instruments

MPN: INA2132UA ✓ Active
2.7 V to 36 V Vdss 14-pin SOIC Package
MOQ: 1 |

INA2132UA Overview

Texas Instruments INA2132UA is a dual-channel, low-power, single-supply difference amplifier with a 2.7 V to 36 V supply range, 76 dB minimum common-mode rejection, and a 14-pin SOIC package. Each channel amplifies the voltage difference between two input pins while rejecting common-mode signals, making the device suitable for precision bridge sensing, current measurement, and industrial signal-conditioning systems.

A difference amplifier is a specialized amplifier architecture that subtracts two input voltages and multiplies the result by a defined gain. Its role within the amplifier hierarchy is amplifier IC to instrumentation amplifier to low-power difference amplifier. Internal precision resistors establish the nominal gain, while the amplifier rejects signals common to both inputs. This architecture reduces errors in sensor systems where a small differential signal is superimposed on a larger common-mode voltage.

The INA2132UA provides two amplifier channels, a common-mode input range extending from -15 V to 28 V, and a bandwidth of approximately 3 MHz. Its 36 V maximum supply capability supports higher-voltage industrial systems. The 14-pin SOIC package allows straightforward surface-mount assembly, while the -40 °C to +85 °C operating range supports industrial temperature environments.

Each channel combines a precision operational-amplifier core with a laser-trimmed resistor network. This construction supports consistent gain and common-mode rejection without requiring external gain-setting resistors. Because both channels are integrated into one package, designers can use the two amplifiers for complementary measurement channels, differential sensing, or two-stage signal conditioning within the same circuit.

Typical uses include Wheatstone-bridge sensor front ends, motor-current monitoring, differential voltage measurement, and industrial process-control inputs. The common-mode rejection characteristic is particularly useful when the desired signal is much smaller than the voltage shared by both input terminals. The approximately 3 MHz bandwidth also allows the amplifier to process signals beyond static or very slow sensor outputs.

When designing the circuit, verify that input, output, and supply voltages remain within their operating limits at every temperature and tolerance corner. Keep sensitive input routing short, maintain symmetric layouts around the differential pair, and use stable reference and bypass connections to minimize offset and noise errors. A single-supply design also requires careful review of the output common-mode range when the amplified difference can approach either supply rail.

This page consolidates manufacturer specifications, package details, application guidance, and same-footprint replacement information into a design-oriented resource for engineers evaluating the INA2132UA.

Drop-in alternatives for INA2132UA — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with INA2132UA (same form factor and footprint) — differing in Operating Temperature Range, Package.

Texas Instruments
Operating Temperature Range: -40 °C to 85 °C
Package: 14-pin SOIC (D), 0.154 in body width, 3.90 mm nominal width
Compare with INA2132UA →

INA2132U

✅ Drop-In
Texas Instruments
📦 14-pin SOIC
2 channels · Dual, low-power, single-supply difference amplifier · 2.7 V · 36 V · 76 dB · -15 V · 28 V · 300 kHz

Contact for price

View Datasheet →

INA2132UAE4

✅ Drop-In
📦 14-pin SOIC
Same 2.7 V to 36 V supply and 76 dB minimum CMRR ratings; 0 V electrical difference in those compared limits.

📋 Reference alternative (not in catalog)

INA2132AQDRDN

✅ Drop-In
📦 14-pin SOIC
Automotive-qualified ordering code with the same 14-pin SOIC footprint; qualification grade differs by 0 functional channels.

📋 Reference alternative (not in catalog)

INA2132U/7880783

✅ Drop-In
📦 14-pin SOIC
Same two-channel, 2.7 V to 36 V architecture and 76 dB minimum CMRR; compared performance differs by 0 dB.

📋 Reference alternative (not in catalog)

INA2132UA Maximum Ratings & Electrical Characteristics

Amplifier Type Dual low-power single-supply difference amplifier
Number of Channels 2 channels
Supply Voltage Range 2.7 V to 36 V
Total Supply Voltage 36 V maximum
Common-Mode Rejection 76 dB minimum
Common-Mode Input Range -15 V to 28 V
Gain Bandwidth Approximately 3 MHz
Gain 1 dB
Operating Temperature Range -40 °C to +85 °C
Package 14-pin SOIC
Package Type SO-14 surface-mount package
Mounting Type Surface mount
Supply Type Single supply

INA2132UA so-14 surface-mount package Pin Configuration Guide

Pin configuration for INA2132UA (so-14 surface-mount package package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

so-14 surface-mount package package pinout diagram for INA2132UA

No detailed pinout data available for INA2132UA.

Refer to the datasheet for full pin configuration.

Typical Applications

INA2132UA is suitable for 6 applications: Wheatstone-Bridge Sensor Front End, Motor and Inductor Current Sensing, Industrial Process Voltage Measurement, Balanced Audio and Communication Input, Precision Differential Voltage Acquisition, Portable Sensor and Test Equipment.

🧩

Wheatstone-Bridge Sensor Front End

The INA2132UA fits Wheatstone-bridge sensing because each channel subtracts the two bridge-node voltages and rejects their shared component. Its 76 dB minimum common-mode rejection reduces errors when the bridge output is small relative to the excitation voltage, while the approximately 3 MHz bandwidth covers more than static resistive sensors. Place the bridge close to the amplifier, keep the two input paths symmetric, and verify that both bridge nodes remain within the -15 V to 28 V common-mode range. The 2.7 V to 36 V single-supply operation also simplifies instrumentation powered from low-voltage or industrial rails.

⚡

Motor and Inductor Current Sensing

The INA2132UA can measure a small shunt-voltage difference while rejecting the larger voltage shared by the shunt terminals. Its 76 dB minimum common-mode rejection is advantageous when motor or switching-node voltage varies around a comparatively small current signal, and its approximately 3 MHz bandwidth supports faster current transients than a static sensor interface. Place the shunt and amplifier inputs close together, route the pair as a differential signal, and keep high-current switching nodes away from the input traces. Confirm that the maximum common-mode voltage remains below 28 V for the stated operating configuration.

🏭

Industrial Process Voltage Measurement

The INA2132UA is appropriate for industrial process signals where a differential measurement is superimposed on a common-mode voltage. The dual configuration supports two related analog channels without requiring two separate packages, and the 36 V maximum supply provides headroom for 24 V industrial systems. Its common-mode rejection reduces sensitivity to shared disturbances, while the 2.7 V lower supply limit permits low-energy measurement nodes. Design the front end so protection-network leakage is balanced on both inputs and verify output swing against the selected single supply at minimum and maximum load conditions.

🎧

Balanced Audio and Communication Input

The INA2132UA can condition balanced signals in which useful content appears differentially and unwanted noise appears in common. Its 76 dB minimum common-mode rejection improves rejection of shared noise on cable-derived or transformer-derived inputs, while the approximately 3 MHz bandwidth covers a broad range of audio and communication-band signals. Use matched input routing and ground geometry to prevent the amplifier itself from converting differential noise into common-mode error. Check the output swing carefully because a single-supply implementation may require biasing around a midpoint before the signal is sent to downstream converters.

📺

Precision Differential Voltage Acquisition

The INA2132UA suits acquisition channels that require subtraction, internal gain consistency, and common-mode suppression close to the sensor. Two integrated channels can measure complementary or related differential voltages, reducing component count and helping maintain matching across a system. The approximately 3 MHz bandwidth provides useful margin for moderately fast sensor signals without requiring a high-speed instrumentation-amplifier architecture. Place input protection close to the pins, balance component values around both channels, and use a low-noise reference arrangement where the downstream converter requires additional precision beyond the amplifier's intrinsic input performance.

📱

Portable Sensor and Test Equipment

The low-power, single-supply INA2132UA supports compact battery-powered measurement systems that need two differential analog channels. Its 2.7 V minimum supply allows operation from low-voltage rails, and the 14-pin SOIC package preserves board area relative to using two separate amplifier packages. The 76 dB minimum common-mode rejection helps preserve weak sensor signals in systems with shared ground potential differences. For portable equipment, evaluate the complete power budget under worst-case input conditions and confirm that output headroom is adequate because the input common-mode range extends below ground while the amplifier remains single-supply.

Recommended Products Summary

INA2132U Texas Instruments Used in: Wheatstone-Bridge Sensor Front End, Motor and Inductor Current Sensing, Balanced Audio and Communication Input, Precision Differential Voltage Acquisition, Portable Sensor and Test Equipment INA2132AQDRDN Automotive-qualified same-family option Used in: Wheatstone-Bridge Sensor Front End, Industrial Process Voltage Measurement, Precision Differential Voltage Acquisition INA2132UAE4 Same-family alternate dual current-sense amplifier Used in: Motor and Inductor Current Sensing, Industrial Process Voltage Measurement, Balanced Audio and Communication Input, Portable Sensor and Test Equipment
What is the INA2132UA?
The INA2132UA is a dual-channel, low-power, single-supply difference amplifier from Texas Instruments. It contains two independent amplifier channels in a 14-pin SOIC package and is designed for differential measurement and signal-conditioning applications. According to the Texas Instruments INA2132 datasheet SBOS108, the device supports a 2.7 V to 36 V supply range and operation from -40 °C to +85 °C.
What are the key specifications of INA2132UA?
The principal INA2132UA specifications are two amplifier channels, a 2.7 V to 36 V supply range, 76 dB minimum common-mode rejection, a -15 V to 28 V common-mode input range, and approximately 3 MHz gain-bandwidth performance. Texas Instruments specifies the device in a 14-pin SOIC package for the industrial temperature range of -40 °C to +85 °C. The dual integration allows two related analog channels to share one package.
Where can I download the INA2132UA datasheet PDF?
The official INA2132UA datasheet PDF is available from Texas Instruments at the manufacturer's INA2132 document link. The manufacturer describes the INA2132 as a dual, low-power, single-supply difference amplifier and identifies the INA2132UA as a 14-pin SOIC configuration. Use the manufacturer datasheet for the authoritative pin description, electrical characteristics, and application guidance.
Where can I find the INA2132UA pinout?
The INA2132UA pin assignment is documented in the pin-configuration section of the Texas Instruments INA2132 datasheet SBOS108. The component uses a 14-pin SOIC package, and its two amplifier channels share supply connections while retaining separate input and output pins. Use the manufacturer pin-description table when assigning PCB tracks because exposed-package drawing conventions alone do not identify every electrical function.
What is the supply voltage range of INA2132UA?
The INA2132UA operates from 2.7 V to 36 V. The Texas Instruments INA2132 datasheet SBOS108 identifies a single-supply architecture, which simplifies systems that do not have a negative analog rail. Supply selection must still account for output swing, input common-mode range, and transient limits; the permitted common-mode input interval is -15 V through 28 V.
What is the common-mode rejection of INA2132UA?
The INA2132UA provides 76 dB minimum common-mode rejection. Common-mode rejection is the ability to suppress a voltage appearing equally at both inputs, which is valuable in bridge sensors and other systems where the desired differential signal is much smaller than the shared input voltage. The value is listed for the INA2132UA in Texas Instruments product and comparison information.
Is the INA2132UA suitable for bridge-sensor measurements?
Yes, the INA2132UA is suitable for Wheatstone-bridge and other differential sensor measurements because it subtracts the two input voltages and provides 76 dB minimum common-mode rejection. Its approximately 3 MHz bandwidth supports signals beyond slow static sensor outputs. The bridge excitation, input range, output swing, and sensor sensitivity must still be checked against the final circuit.
Where to buy INA2132UA online?
The INA2132UA can be requested through XAIPART's Request a Quote form on this page. The form is the appropriate route for current commercial availability, lot-related requirements, and an order discussion. Texas Instruments identifies the INA2132UA as a 14-pin SOIC dual difference amplifier, which allows the requested configuration to be matched precisely before quotation.
What is the price of INA2132UA?
The current commercial terms for INA2132UA are handled through XAIPART's Request a Quote form on this page. Submit the required quantity, packaging preference, and target delivery information to obtain an actionable quotation. This approach avoids presenting a static price that may not reflect current component inventory, purchasing volume, or order conditions.
What is the lead time for INA2132UA?
Request the current INA2132UA lead time through XAIPART's Request a Quote form on this page. Include the required quantity, schedule, and approved part configuration so procurement can confirm the available supply route. Texas Instruments specifies the INA2132UA in a 14-pin SOIC package, and the order suffix should remain unchanged when requesting a quotation.
Is INA2132UA in stock?
Use XAIPART's Request a Quote form on this page to confirm current stock and order status for INA2132UA. Include the required quantity and packaging needs so the response reflects the intended order rather than a generic component listing. The request also provides a direct route for discussing scheduled deliveries and any applicable order constraints.
What is the best drop-in replacement for INA2132UA?
The closest same-family drop-in candidates identified for INA2132UA are INA2132U, INA2132UAE4, and INA2132AQDRDN, each listed for a 14-pin SOIC configuration. Verify the exact pinout, gain, supply limits, and grade requirements against the INA2132 datasheet SBOS108 before substitution. Packaging suffixes should be checked independently from electrical pin compatibility.
Can INA2132U replace INA2132UA?
The INA2132U is a strong same-family replacement candidate because published comparison data lists the same two-channel architecture, 2.7 V to 36 V supply range, 76 dB common-mode rejection, and -15 V to 28 V common-mode input range as the INA2132UA. Both use the 14-pin SOIC configuration. Confirm ordering details and the manufacturer pin table before treating the substitution as production-approved.
When should I choose INA2132UA instead of a dual precision op amp?
Choose the INA2132UA when the signal path needs integrated differential subtraction and consistent internal gain rather than externally configured discrete resistors. Its laser-trimmed resistor network supports repeatable common-mode rejection and gain behavior, while two channels fit in one 14-pin SOIC. Choose a dual precision op amp instead only when the design requires independent resistor-set gains, unusual common-mode ranges, or functions beyond the INA2132 feature set.
Is INA2132UA the same as INA2132AQDRDN?
No, the INA2132UA and INA2132AQDRDN share a 14-pin SOIC format and closely related instrumentation-amplifier functions, but their orderable grade and qualification requirements differ. The automotive-oriented QDR suffix identifies a distinct qualified configuration rather than an identical sellable part. Compare temperature grade, qualification, production status, and every electrical limit before substitution.

Engineering reference data for INA2132UA — comparison, design guidance, and compliance information.

Selection Guide

Choose the INA2132UA when the design needs two low-power difference-amplifier channels, integrated precision gain elements, 76 dB minimum common-mode rejection, and operation from a 2.7 V to 36 V single supply in a 14-pin SOIC package. It is particularly suitable for bridge sensors, shunt measurement, and industrial process inputs where a small differential signal is accompanied by a larger common-mode voltage. The INA2132U and INA2132UAE4 are same-family options when their specific ordering and lifecycle conditions are preferable. Select INA2132AQDRDN when the automotive-oriented qualification identity is required. Before substitution, verify the exact pin descriptions, gain, output swing, offset, noise, and qualification requirements against SBOS108. A discrete dual precision op-amp design should be chosen only when independently adjustable gains or functions outside the integrated difference-amplifier configuration are essential.

Comparison with Alternatives

Parameter This Product INA2132U INA2132UAE4 INA2132AQDRDN INA2132U/7880783
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC
Number of Channels 2 channels 2 channels 2 channels 2 channels 2 channels
Amplifier Type Dual low-power single-supply difference amplifier Dual low-power single-supply difference amplifier Dual low-power single-supply difference amplifier Dual difference amplifier Dual difference amplifier
Qualification Grade Industrial temperature range Industrial temperature range Industrial temperature range Automotive-oriented ordering code Industrial temperature range

Key Differentiators

  • Integrated dual differential measurement channels (vs INA2132U)
  • High common-mode rejection for difference measurement (vs INA2132UAE4)
  • Wide common-mode input operating range (vs INA2132U/7880783)
  • Choice of industrial and automotive-qualified family configurations (vs INA2132AQDRDN)

Design Notes

Route the two inputs of each channel as a tightly coupled differential pair. Keep both traces similar in length and geometry, connect input protection devices symmetrically, and avoid sharing return paths with switching-current nodes. This reduces conversion of common-mode noise and parasitic imbalance into differential error, which is important because the INA2132UA relies on common-mode rejection rather than input filtering alone.

Validate the entire signal path against the single-supply operating limits. The amplifier accepts inputs from -15 V to 28 V relative to ground, but the usable output range still depends on supply voltage and load. Check minimum output swing, maximum output swing, and settling behavior at the lowest supply. Place supply bypass components close to the relevant pins and use a quiet return path to avoid injecting supply disturbance into the measurement.

Do not assume that the input common-mode rating determines the permitted output swing. Use the manufacturer's operating-characteristics curves and load conditions to verify signal headroom, particularly for low-voltage single-supply designs. Also confirm that selected alternate order codes retain the same pin function and electrical limits; a shared SOIC outline alone does not establish interchangeability.

Protect sensor inputs against ESD, surge, and transient overvoltage without introducing unbalanced leakage. Place protection networks symmetrically and close to the amplifier pins, and confirm that their capacitance, resistance, and temperature behavior do not degrade the approximately 3 MHz bandwidth or the 76 dB common-mode rejection objective.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The INA2132UA is specified for the -40 °C to +85 °C industrial temperature range. No explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 statement was established for this orderable configuration.

Related Searches

INA2132UA datasheet INA2132UA datasheet pdf INA2132UA pinout INA2132UA specifications INA2132UA equivalent INA2132UA replacement INA2132UA cross reference INA2132UA vs INA2132U INA2132UA SOIC-14 footprint INA2132UA current sensing INA2132UA bridge sensor amplifier INA2132UA price INA2132UA stock Texas Instruments INA2132UA what is the common-mode rejection of INA2132UA

Related Components & Terms

Texas Instruments INA2132UA INA2132U INA2132UAE4 INA2132AQDRDN difference amplifier instrumentation amplifier amplifier IC low-dropout amplifier precision amplifier common-mode rejection ratio CMRR common-mode input range gain bandwidth single-supply operation laser-trimmed resistor network Wheatstone bridge current-sense amplifier industrial process control SO-14 SOIC surface-mount package RoHS REACH AEC-Q100
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details